From 9273b56278e64dd47b1a96a705ddf46aeaf6afe3 Mon Sep 17 00:00:00 2001 From: Eric Kidd Date: Tue, 3 Feb 2009 13:27:03 -0500 Subject: [PATCH 001/149] filter-branch: Fix fatal error on bare repositories When git filter-branch is run on a bare repository, it prints out a fatal error message: $ git filter-branch branch Rewrite 476c4839280c219c2317376b661d9d95c1727fc3 (9/9) WARNING: Ref 'refs/heads/branch' is unchanged fatal: This operation must be run in a work tree Note that this fatal error message doesn't prevent git filter-branch from exiting successfully. (Why doesn't git filter-branch actually exit with an error when a shell command fails? I'm not sure why it was designed this way.) This error message is caused by the following section of code at the end of git-filter-branch.sh: if [ "$(is_bare_repository)" = false ]; then unset GIT_DIR GIT_WORK_TREE GIT_INDEX_FILE test -z "$ORIG_GIT_DIR" || { GIT_DIR="$ORIG_GIT_DIR" && export GIT_DIR } ... elided ... git read-tree -u -m HEAD fi The problem is the call to $(is_bare_repository), which is made before GIT_DIR and GIT_WORK_TREE are restored. This call always returns "false", even when we're running in a bare repository. But this means that we will attempt to call 'git read-tree' even in a bare repository, which will fail and print an error. This patch modifies git-filter-branch.sh to restore the original environment variables before trying to call is_bare_repository. Signed-off-by: Junio C Hamano --- git-filter-branch.sh | 25 +++++++++++++------------ t/t7003-filter-branch.sh | 4 +++- 2 files changed, 16 insertions(+), 13 deletions(-) diff --git a/git-filter-branch.sh b/git-filter-branch.sh index c106f45af7..56d1bd0f99 100755 --- a/git-filter-branch.sh +++ b/git-filter-branch.sh @@ -442,19 +442,20 @@ rm -rf "$tempdir" trap - 0 +unset GIT_DIR GIT_WORK_TREE GIT_INDEX_FILE +test -z "$ORIG_GIT_DIR" || { + GIT_DIR="$ORIG_GIT_DIR" && export GIT_DIR +} +test -z "$ORIG_GIT_WORK_TREE" || { + GIT_WORK_TREE="$ORIG_GIT_WORK_TREE" && + export GIT_WORK_TREE +} +test -z "$ORIG_GIT_INDEX_FILE" || { + GIT_INDEX_FILE="$ORIG_GIT_INDEX_FILE" && + export GIT_INDEX_FILE +} + if [ "$(is_bare_repository)" = false ]; then - unset GIT_DIR GIT_WORK_TREE GIT_INDEX_FILE - test -z "$ORIG_GIT_DIR" || { - GIT_DIR="$ORIG_GIT_DIR" && export GIT_DIR - } - test -z "$ORIG_GIT_WORK_TREE" || { - GIT_WORK_TREE="$ORIG_GIT_WORK_TREE" && - export GIT_WORK_TREE - } - test -z "$ORIG_GIT_INDEX_FILE" || { - GIT_INDEX_FILE="$ORIG_GIT_INDEX_FILE" && - export GIT_INDEX_FILE - } git read-tree -u -m HEAD fi diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index b0a9d7d536..6a9936e5c4 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -39,7 +39,9 @@ test_expect_success 'result is really identical' ' ' test_expect_success 'rewrite bare repository identically' ' - (git config core.bare true && cd .git && git filter-branch branch) + (git config core.bare true && cd .git && + git filter-branch branch > filter-output 2>&1 && + ! fgrep fatal filter-output) ' git config core.bare false test_expect_success 'result is really identical' ' From ca6ac7f1357df352fec247dc98a3e6784e6c3fea Mon Sep 17 00:00:00 2001 From: Thomas Rast Date: Thu, 5 Feb 2009 09:28:26 +0100 Subject: [PATCH 002/149] add -p: prompt for single characters Use Term::ReadKey, if available and enabled with interactive.singlekey, to let the user answer add -p's prompts by pressing a single key. We're not doing the same in the main 'add -i' interface because file selection etc. may expect several characters. Two commands take an argument: 'g' can easily cope since it'll just offer a choice of chunks. '/' now (unconditionally, even without readkey) offers a chance to enter a regex if none was given. Signed-off-by: Thomas Rast Signed-off-by: Junio C Hamano --- Documentation/config.txt | 7 ++++++ git-add--interactive.perl | 45 +++++++++++++++++++++++++++++++++++---- 2 files changed, 48 insertions(+), 4 deletions(-) diff --git a/Documentation/config.txt b/Documentation/config.txt index e2b8775dd3..eeb2b0d353 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -1000,6 +1000,13 @@ instaweb.port:: The port number to bind the gitweb httpd to. See linkgit:git-instaweb[1]. +interactive.singlekey:: + In interactive programs, allow the user to provide one-letter + input with a single key (i.e., without hitting enter). + Currently this is used only by the `\--patch` mode of + linkgit:git-add[1]. Note that this setting is silently + ignored if portable keystroke input is not available. + log.date:: Set default date-time mode for the log command. Setting log.date value is similar to using 'git-log'\'s --date option. The value is one of the diff --git a/git-add--interactive.perl b/git-add--interactive.perl index 3bf0cda4ee..1813f9e8e3 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -33,6 +33,14 @@ my ($diff_new_color) = my $normal_color = $repo->get_color("", "reset"); +my $use_readkey = 0; +if ($repo->config_bool("interactive.singlekey")) { + eval { + use Term::ReadKey; + $use_readkey = 1; + }; +} + sub colored { my $color = shift; my $string = join("", @_); @@ -758,11 +766,32 @@ sub diff_applies { return close $fh; } +sub _restore_terminal_and_die { + ReadMode 'restore'; + print "\n"; + exit 1; +} + +sub prompt_single_character { + if ($use_readkey) { + local $SIG{TERM} = \&_restore_terminal_and_die; + local $SIG{INT} = \&_restore_terminal_and_die; + ReadMode 'cbreak'; + my $key = ReadKey 0; + ReadMode 'restore'; + print "$key" if defined $key; + print "\n"; + return $key; + } else { + return ; + } +} + sub prompt_yesno { my ($prompt) = @_; while (1) { print colored $prompt_color, $prompt; - my $line = ; + my $line = prompt_single_character; return 0 if $line =~ /^n/i; return 1 if $line =~ /^y/i; } @@ -893,7 +922,7 @@ sub patch_update_file { print @{$mode->{DISPLAY}}; print colored $prompt_color, "Stage mode change [y/n/a/d/?]? "; - my $line = ; + my $line = prompt_single_character; if ($line =~ /^y/i) { $mode->{USE} = 1; last; @@ -966,7 +995,7 @@ sub patch_update_file { print; } print colored $prompt_color, "Stage this hunk [y,n,a,d,/$other,?]? "; - my $line = ; + my $line = prompt_single_character; if ($line) { if ($line =~ /^y/i) { $hunk[$ix]{USE} = 1; @@ -1018,9 +1047,17 @@ sub patch_update_file { next; } elsif ($line =~ m|^/(.*)|) { + my $regex = $1; + if ($1 eq "") { + print colored $prompt_color, "search for regex? "; + $regex = ; + if (defined $regex) { + chomp $regex; + } + } my $search_string; eval { - $search_string = qr{$1}m; + $search_string = qr{$regex}m; }; if ($@) { my ($err,$exp) = ($@, $1); From a301973641f426ab42e5bf9faa6e4da5bd658148 Mon Sep 17 00:00:00 2001 From: Thomas Rast Date: Thu, 5 Feb 2009 09:28:27 +0100 Subject: [PATCH 003/149] add -p: print errors in separate color Print interaction error messages in color.interactive.error, which defaults to the value of color.interactive.help. Signed-off-by: Thomas Rast Signed-off-by: Junio C Hamano --- Documentation/config.txt | 4 ++-- git-add--interactive.perl | 30 ++++++++++++++++++++---------- 2 files changed, 22 insertions(+), 12 deletions(-) diff --git a/Documentation/config.txt b/Documentation/config.txt index eeb2b0d353..1806a60610 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -556,8 +556,8 @@ color.interactive:: color.interactive.:: Use customized color for 'git-add --interactive' - output. `` may be `prompt`, `header`, or `help`, for - three distinct types of normal output from interactive + output. `` may be `prompt`, `header`, `help` or `error`, for + four distinct types of normal output from interactive programs. The values of these variables may be specified as in color.branch.. diff --git a/git-add--interactive.perl b/git-add--interactive.perl index 1813f9e8e3..be8ca8ebb2 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -12,6 +12,12 @@ my ($prompt_color, $header_color, $help_color) = $repo->get_color('color.interactive.header', 'bold'), $repo->get_color('color.interactive.help', 'red bold'), ) : (); +my $error_color = (); +if ($menu_use_color) { + my $help_color_spec = $repo->config('color.interactive.help'); + $error_color = $repo->get_color('color.interactive.error', + $help_color_spec); +} my $diff_use_color = $repo->get_colorbool('color.diff'); my ($fraginfo_color) = @@ -333,6 +339,10 @@ sub highlight_prefix { return "$prompt_color$prefix$normal_color$remainder"; } +sub error_msg { + print STDERR colored $error_color, @_; +} + sub list_and_choose { my ($opts, @stuff) = @_; my (@chosen, @return); @@ -428,12 +438,12 @@ sub list_and_choose { else { $bottom = $top = find_unique($choice, @stuff); if (!defined $bottom) { - print "Huh ($choice)?\n"; + error_msg "Huh ($choice)?\n"; next TOPLOOP; } } if ($opts->{SINGLETON} && $bottom != $top) { - print "Huh ($choice)?\n"; + error_msg "Huh ($choice)?\n"; next TOPLOOP; } for ($i = $bottom-1; $i <= $top-1; $i++) { @@ -1029,11 +1039,11 @@ sub patch_update_file { chomp $response; } if ($response !~ /^\s*\d+\s*$/) { - print STDERR "Invalid number: '$response'\n"; + error_msg "Invalid number: '$response'\n"; } elsif (0 < $response && $response <= $num) { $ix = $response - 1; } else { - print STDERR "Sorry, only $num hunks available.\n"; + error_msg "Sorry, only $num hunks available.\n"; } next; } @@ -1062,7 +1072,7 @@ sub patch_update_file { if ($@) { my ($err,$exp) = ($@, $1); $err =~ s/ at .*git-add--interactive line \d+, line \d+.*$//; - print STDERR "Malformed search regexp $exp: $err\n"; + error_msg "Malformed search regexp $exp: $err\n"; next; } my $iy = $ix; @@ -1072,7 +1082,7 @@ sub patch_update_file { $iy++; $iy = 0 if ($iy >= $num); if ($ix == $iy) { - print STDERR "No hunk matches the given pattern\n"; + error_msg "No hunk matches the given pattern\n"; last; } } @@ -1084,7 +1094,7 @@ sub patch_update_file { $ix--; } else { - print STDERR "No previous hunk\n"; + error_msg "No previous hunk\n"; } next; } @@ -1093,7 +1103,7 @@ sub patch_update_file { $ix++; } else { - print STDERR "No next hunk\n"; + error_msg "No next hunk\n"; } next; } @@ -1106,13 +1116,13 @@ sub patch_update_file { } } else { - print STDERR "No previous hunk\n"; + error_msg "No previous hunk\n"; } next; } elsif ($line =~ /^j/) { if ($other !~ /j/) { - print STDERR "No next hunk\n"; + error_msg "No next hunk\n"; next; } } From 26be15f09db15d2b53a13d0f184d77fb54367f33 Mon Sep 17 00:00:00 2001 From: Johannes Schindelin Date: Thu, 5 Feb 2009 19:19:33 +0100 Subject: [PATCH 004/149] filter-branch: do not consider diverging submodules a 'dirty worktree' At the end of filter-branch in a non-bare repository, the work tree is updated with "read-tree -m -u HEAD", to carry the change forward in case the current branch was rewritten. In order to avoid losing any local change during this step, filter-branch refuses to work when there are local changes in the work tree. This "read-tree -m -u HEAD" operation does not affect what commit is checked out in a submodule (iow, it does not touch .git/HEAD in a submodule checkout), and checking if there is any local change to the submodule is not useful. Staged submodules _are_ considered to be 'dirty', however, as the "read-tree -m -u HEAD" could result in loss of staged information otherwise. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano --- git-filter-branch.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/git-filter-branch.sh b/git-filter-branch.sh index 56d1bd0f99..0897b5971a 100755 --- a/git-filter-branch.sh +++ b/git-filter-branch.sh @@ -98,7 +98,7 @@ OPTIONS_SPEC= . git-sh-setup if [ "$(is_bare_repository)" = false ]; then - git diff-files --quiet && + git diff-files --ignore-submodules --quiet && git diff-index --cached --quiet HEAD -- || die "Cannot rewrite branch(es) with a dirty working directory." fi From 748aa689bac2c1dd5d902815b0dec6364d20bf34 Mon Sep 17 00:00:00 2001 From: Thomas Rast Date: Fri, 6 Feb 2009 20:30:01 +0100 Subject: [PATCH 005/149] add -p: import Term::ReadKey with 'require' eval{use...} is no good because the 'use' is evaluated at compile time, so manually 'require' it. We need to forward declare the functions we use, otherwise Perl raises a compilation error. Signed-off-by: Thomas Rast Signed-off-by: Junio C Hamano --- git-add--interactive.perl | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/git-add--interactive.perl b/git-add--interactive.perl index be8ca8ebb2..ec47888f57 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -40,9 +40,12 @@ my ($diff_new_color) = my $normal_color = $repo->get_color("", "reset"); my $use_readkey = 0; +sub ReadMode; +sub ReadKey; if ($repo->config_bool("interactive.singlekey")) { eval { - use Term::ReadKey; + require Term::ReadKey; + Term::ReadKey->import; $use_readkey = 1; }; } From 31ca3ac30fe3c2583881a74ef346911c8fba478f Mon Sep 17 00:00:00 2001 From: Fabian Franz Date: Thu, 5 Feb 2009 20:18:32 -0200 Subject: [PATCH 006/149] submodule: add --no-fetch parameter to update command git submodule update --no-fetch makes it possible to use git submodule update in complete offline mode by not fetching new revisions. This does make sense in the following setup: * There is an unstable and a stable branch in the super/master repository. * The submodules might be at different revisions in the branches. * You are at some place without internet connection ;) With this patch it is now possible to change branches and update the submodules to be at the recorded revision without online access. Another advantage is that with -N the update operation is faster, because fetch is checking for new updates even if there was no fetch/pull on the super/master repository since the last update. Signed-off-by: Fabian Franz Signed-off-by: Junio C Hamano --- Documentation/git-submodule.txt | 7 ++++++- git-submodule.sh | 19 ++++++++++++++++--- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 2f207fbbda..3b8df44673 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git submodule' [--quiet] add [-b branch] [--] 'git submodule' [--quiet] status [--cached] [--] [...] 'git submodule' [--quiet] init [--] [...] -'git submodule' [--quiet] update [--init] [--] [...] +'git submodule' [--quiet] update [--init] [-N|--no-fetch] [--] [...] 'git submodule' [--quiet] summary [--summary-limit ] [commit] [--] [...] 'git submodule' [--quiet] foreach 'git submodule' [--quiet] sync [--] [...] @@ -172,6 +172,11 @@ OPTIONS (the default). This limit only applies to modified submodules. The size is always limited to 1 for added/deleted/typechanged submodules. +-N:: +--no-fetch:: + This option is only valid for the update command. + Don't fetch new objects from the remote site. + ...:: Paths to submodule(s). When specified this will restrict the command to only operate on the submodules found at the specified paths. diff --git a/git-submodule.sh b/git-submodule.sh index 2f47e065fe..af8d10ca83 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -5,7 +5,7 @@ # Copyright (c) 2007 Lars Hjemli USAGE="[--quiet] [--cached] \ -[add [-b branch] ]|[status|init|update [-i|--init]|summary [-n|--summary-limit ] []] \ +[add [-b branch] ]|[status|init|update [-i|--init] [-N|--no-fetch]|summary [-n|--summary-limit ] []] \ [--] [...]|[foreach ]|[sync [--] [...]]" OPTIONS_SPEC= . git-sh-setup @@ -16,6 +16,7 @@ command= branch= quiet= cached= +nofetch= # # print stuff on stdout unless -q was specified @@ -300,6 +301,10 @@ cmd_update() shift cmd_init "$@" || return ;; + -N|--no-fetch) + shift + nofetch=1 + ;; --) shift break @@ -345,8 +350,16 @@ cmd_update() then force="-f" fi - (unset GIT_DIR; cd "$path" && git-fetch && - git-checkout $force -q "$sha1") || + + if test -z "$nofetch" + then + (unset GIT_DIR; cd "$path" && + git-fetch) || + die "Unable to fetch in submodule path '$path'" + fi + + (unset GIT_DIR; cd "$path" && + git-checkout $force -q "$sha1") || die "Unable to checkout '$sha1' in submodule path '$path'" say "Submodule path '$path': checked out '$sha1'" From 2c3c395e84409c278bd7b050877c36d04b952056 Mon Sep 17 00:00:00 2001 From: "Marcel M. Cary" Date: Fri, 6 Feb 2009 19:24:28 -0800 Subject: [PATCH 007/149] git-sh-setup: Use "cd" option, not /bin/pwd, for symlinked work tree In cd_to_toplevel, instead of 'cd $(unset PWD; /bin/pwd)/$path' use 'cd -P $path'. The "-P" option yields a desirable similarity to C chdir. While the "-P" option may be slightly less commonly supported than /bin/pwd, it is more concise, better tested, and less error prone. I've already added the 'unset PWD' to fix the /bin/pwd solution on BSD; there may be more edge cases out there. This still passes all the same test cases in t5521-pull-symlink.sh and t2300-cd-to-toplevel.sh, even before updating them to use 'pwd -P'. Signed-off-by: Junio C Hamano --- git-sh-setup.sh | 29 ++++++++--------------------- t/t2300-cd-to-toplevel.sh | 4 ++-- 2 files changed, 10 insertions(+), 23 deletions(-) diff --git a/git-sh-setup.sh b/git-sh-setup.sh index 2142308bcc..838233926f 100755 --- a/git-sh-setup.sh +++ b/git-sh-setup.sh @@ -85,27 +85,14 @@ cd_to_toplevel () { cdup=$(git rev-parse --show-cdup) if test ! -z "$cdup" then - case "$cdup" in - /*) - # Not quite the same as if we did "cd -P '$cdup'" when - # $cdup contains ".." after symlink path components. - # Don't fix that case at least until Git switches to - # "cd -P" across the board. - phys="$cdup" - ;; - ..|../*|*/..|*/../*) - # Interpret $cdup relative to the physical, not logical, cwd. - # Probably /bin/pwd is more portable than passing -P to cd or pwd. - phys="$(unset PWD; /bin/pwd)/$cdup" - ;; - *) - # There's no "..", so no need to make things absolute. - phys="$cdup" - ;; - esac - - cd "$phys" || { - echo >&2 "Cannot chdir to $phys, the toplevel of the working tree" + # The "-P" option says to follow "physical" directory + # structure instead of following symbolic links. When cdup is + # "../", this means following the ".." entry in the current + # directory instead textually removing a symlink path element + # from the PWD shell variable. The "-P" behavior is more + # consistent with the C-style chdir used by most of Git. + cd -P "$cdup" || { + echo >&2 "Cannot chdir to $cdup, the toplevel of the working tree" exit 1 } fi diff --git a/t/t2300-cd-to-toplevel.sh b/t/t2300-cd-to-toplevel.sh index e42cbfe6c6..293dc353b1 100755 --- a/t/t2300-cd-to-toplevel.sh +++ b/t/t2300-cd-to-toplevel.sh @@ -10,12 +10,12 @@ test_cd_to_toplevel () { cd '"'$1'"' && . git-sh-setup && cd_to_toplevel && - [ "$(unset PWD; /bin/pwd)" = "$TOPLEVEL" ] + [ "$(pwd -P)" = "$TOPLEVEL" ] ) ' } -TOPLEVEL="$(unset PWD; /bin/pwd)/repo" +TOPLEVEL="$(pwd -P)/repo" mkdir -p repo/sub/dir mv .git repo/ SUBDIRECTORY_OK=1 From b59122f86f23007fce374f92de7f6e0a73793026 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sat, 7 Feb 2009 00:51:47 -0800 Subject: [PATCH 008/149] GIT 1.6.1.3 Signed-off-by: Junio C Hamano --- Documentation/RelNotes-1.6.1.3.txt | 32 ++++++++++++++++++++++++++++++ GIT-VERSION-GEN | 2 +- RelNotes | 2 +- 3 files changed, 34 insertions(+), 2 deletions(-) create mode 100644 Documentation/RelNotes-1.6.1.3.txt diff --git a/Documentation/RelNotes-1.6.1.3.txt b/Documentation/RelNotes-1.6.1.3.txt new file mode 100644 index 0000000000..6f0bde156a --- /dev/null +++ b/Documentation/RelNotes-1.6.1.3.txt @@ -0,0 +1,32 @@ +GIT v1.6.1.3 Release Notes +========================== + +Fixes since v1.6.1.2 +-------------------- + +* "git diff --binary | git apply" pipeline did not work well when + a binary blob is changed to a symbolic link. + +* Some combinations of -b/-w/--ignore-space-at-eol to "git diff" did + not work as expected. + +* "git grep" did not pass the -I (ignore binary) option when + calling out an external grep program. + +* "git log" and friends include HEAD to the set of starting points + when --all is given. This makes a difference when you are not + on any branch. + +* "git mv" to move an untracked file to overwrite a tracked + contents misbehaved. + +* "git merge -s octopus" with many potential merge bases did not + work correctly. + +* RPM binary package installed the html manpages in a wrong place. + +Also includes minor documentation fixes and updates. + + +-- +git shortlog --no-merges v1.6.1.2-33-gc789350.. diff --git a/GIT-VERSION-GEN b/GIT-VERSION-GEN index 3697edc72e..550a0ae371 100755 --- a/GIT-VERSION-GEN +++ b/GIT-VERSION-GEN @@ -1,7 +1,7 @@ #!/bin/sh GVF=GIT-VERSION-FILE -DEF_VER=v1.6.1.2.GIT +DEF_VER=v1.6.1.3.GIT LF=' ' diff --git a/RelNotes b/RelNotes index da6e81321a..0a61bcd11b 120000 --- a/RelNotes +++ b/RelNotes @@ -1 +1 @@ -Documentation/RelNotes-1.6.1.2.txt \ No newline at end of file +Documentation/RelNotes-1.6.1.3.txt \ No newline at end of file From c375e9d04cbcaaca7ae459437d185eda0a4472b4 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Sun, 23 Nov 2008 14:16:22 +0100 Subject: [PATCH 009/149] git.el: Add a checkout command. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Prompts for a branch name and checks it out. Bound to C-c C-o by default. Based on a patch by Rémi Vanicat . Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 33 +++++++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 09e8bae3a4..5ce9bf19a7 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -39,10 +39,8 @@ ;; - renaming files from the status buffer ;; - creating tags ;; - fetch/pull -;; - switching branches ;; - revlist browser ;; - git-show-branch browser -;; - menus ;; (eval-when-compile (require 'cl)) @@ -397,6 +395,17 @@ the process output as a string, or nil if the git command failed." (unless newval (push "-d" args)) (apply 'git-call-process-display-error "update-ref" args))) +(defun git-for-each-ref (&rest specs) + "Return a list of refs using git-for-each-ref. +Each entry is a cons of (SHORT-NAME . FULL-NAME)." + (let (refs) + (with-temp-buffer + (apply #'git-call-process t "for-each-ref" "--format=%(refname)" specs) + (goto-char (point-min)) + (while (re-search-forward "^[^/\n]+/[^/\n]+/\\(.+\\)$" nil t) + (push (cons (match-string 1) (match-string 0)) refs))) + (nreverse refs))) + (defun git-read-tree (tree &optional index-file) "Read a tree into the index file." (let ((process-environment @@ -1356,6 +1365,24 @@ Return the list of files that haven't been handled." (push (match-string 1) files))) files)) +(defun git-read-commit-name (prompt &optional default) + "Ask for a commit name, with completion for local branch, remote branch and tag." + (completing-read prompt + (list* "HEAD" "ORIG_HEAD" "FETCH_HEAD" (mapcar #'car (git-for-each-ref))) + nil nil nil nil default)) + +(defun git-checkout (branch &optional merge) + "Checkout a branch, tag, or any commit. +Use a prefix arg if git should merge while checking out." + (interactive + (list (git-read-commit-name "Checkout: ") + current-prefix-arg)) + (unless git-status (error "Not in git-status buffer.")) + (let ((args (list branch "--"))) + (when merge (push "-m" args)) + (when (apply #'git-call-process-display-error "checkout" args) + (git-update-status-files)))) + (defun git-amend-commit () "Undo the last commit on HEAD, and set things up to commit an amended version of it." @@ -1471,6 +1498,7 @@ amended version of it." (define-key map "\M-\C-?" 'git-unmark-all) ; the commit submap (define-key commit-map "\C-a" 'git-amend-commit) + (define-key commit-map "\C-o" 'git-checkout) ; the diff submap (define-key diff-map "b" 'git-diff-file-base) (define-key diff-map "c" 'git-diff-file-combined) @@ -1491,6 +1519,7 @@ amended version of it." `("Git" ["Refresh" git-refresh-status t] ["Commit" git-commit-file t] + ["Checkout..." git-checkout t] ("Merge" ["Next Unmerged File" git-next-unmerged-file t] ["Prev Unmerged File" git-prev-unmerged-file t] From 811b10c746a63d1818d52c9ecbf247d9a3891597 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Sun, 23 Nov 2008 14:25:50 +0100 Subject: [PATCH 010/149] git.el: Add a command to create a new branch. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Prompts for a branch name, create a new branch at HEAD and switch to it. Bound to C-c C-b by default. Based on a patch by Rémi Vanicat . Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 5ce9bf19a7..6727ff54be 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1383,6 +1383,18 @@ Use a prefix arg if git should merge while checking out." (when (apply #'git-call-process-display-error "checkout" args) (git-update-status-files)))) +(defun git-branch (branch) + "Create a branch from the current HEAD and switch to it." + (interactive (list (git-read-commit-name "Branch: "))) + (unless git-status (error "Not in git-status buffer.")) + (if (git-rev-parse (concat "refs/heads/" branch)) + (if (yes-or-no-p (format "Branch %s already exists, replace it? " branch)) + (and (git-call-process-display-error "branch" "-f" branch) + (git-call-process-display-error "checkout" branch)) + (message "Canceled.")) + (git-call-process-display-error "checkout" "-b" branch)) + (git-refresh-ewoc-hf git-status)) + (defun git-amend-commit () "Undo the last commit on HEAD, and set things up to commit an amended version of it." @@ -1498,6 +1510,7 @@ amended version of it." (define-key map "\M-\C-?" 'git-unmark-all) ; the commit submap (define-key commit-map "\C-a" 'git-amend-commit) + (define-key commit-map "\C-b" 'git-branch) (define-key commit-map "\C-o" 'git-checkout) ; the diff submap (define-key diff-map "b" 'git-diff-file-base) @@ -1520,6 +1533,7 @@ amended version of it." ["Refresh" git-refresh-status t] ["Commit" git-commit-file t] ["Checkout..." git-checkout t] + ["New Branch..." git-branch t] ("Merge" ["Next Unmerged File" git-next-unmerged-file t] ["Prev Unmerged File" git-prev-unmerged-file t] From ab69e3e43a12cf02505f3e9e561c49c1fe8a81a6 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Sun, 23 Nov 2008 14:34:48 +0100 Subject: [PATCH 011/149] git.el: Add commands for cherry-pick and revert. Support for cherry-picking and reverting commits, with automatic formatting of the commit log message. Bound to C-c C-p and C-c C-v respectively. Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 6727ff54be..b7ea636534 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1411,6 +1411,44 @@ amended version of it." (git-setup-commit-buffer commit) (git-commit-file)))) +(defun git-cherry-pick-commit (arg) + "Cherry-pick a commit." + (interactive (list (git-read-commit-name "Cherry-pick commit: "))) + (unless git-status (error "Not in git-status buffer.")) + (let ((commit (git-rev-parse (concat arg "^0")))) + (unless commit (error "Not a valid commit '%s'." arg)) + (when (git-rev-parse (concat commit "^2")) + (error "Cannot cherry-pick a merge commit.")) + (let ((files (git-get-commit-files commit)) + (ok (git-call-process-display-error "cherry-pick" "-n" commit))) + (git-update-status-files files ok) + (with-current-buffer (git-setup-commit-buffer commit) + (goto-char (point-min)) + (if (re-search-forward "^\n*Signed-off-by:" nil t 1) + (goto-char (match-beginning 0)) + (goto-char (point-max))) + (insert "(cherry picked from commit " commit ")\n")) + (when ok (git-commit-file))))) + +(defun git-revert-commit (arg) + "Revert a commit." + (interactive (list (git-read-commit-name "Revert commit: "))) + (unless git-status (error "Not in git-status buffer.")) + (let ((commit (git-rev-parse (concat arg "^0")))) + (unless commit (error "Not a valid commit '%s'." arg)) + (when (git-rev-parse (concat commit "^2")) + (error "Cannot revert a merge commit.")) + (let ((files (git-get-commit-files commit)) + (subject (git-get-commit-description commit)) + (ok (git-call-process-display-error "revert" "-n" commit))) + (git-update-status-files files ok) + (when (string-match "^[0-9a-f]+ - \\(.*\\)$" subject) + (setq subject (match-string 1 subject))) + (git-setup-log-buffer (get-buffer-create "*git-commit*") + (git-get-merge-heads) nil nil (format "Revert \"%s\"" subject) nil + (format "This reverts commit %s.\n" commit)) + (when ok (git-commit-file))))) + (defun git-find-file () "Visit the current file in its own buffer." (interactive) @@ -1512,6 +1550,8 @@ amended version of it." (define-key commit-map "\C-a" 'git-amend-commit) (define-key commit-map "\C-b" 'git-branch) (define-key commit-map "\C-o" 'git-checkout) + (define-key commit-map "\C-p" 'git-cherry-pick-commit) + (define-key commit-map "\C-v" 'git-revert-commit) ; the diff submap (define-key diff-map "b" 'git-diff-file-base) (define-key diff-map "c" 'git-diff-file-combined) @@ -1534,6 +1574,8 @@ amended version of it." ["Commit" git-commit-file t] ["Checkout..." git-checkout t] ["New Branch..." git-branch t] + ["Cherry-pick Commit..." git-cherry-pick-commit t] + ["Revert Commit..." git-revert-commit t] ("Merge" ["Next Unmerged File" git-next-unmerged-file t] ["Prev Unmerged File" git-prev-unmerged-file t] From a7da5c425970372f75d7cc2c194d5646554f8a32 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Sun, 23 Nov 2008 16:12:45 +0100 Subject: [PATCH 012/149] git.el: Make git-run-command-region display the error if any. This makes it easier to figure out why a commit has failed. Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index b7ea636534..415765ec51 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -220,7 +220,7 @@ the process output as a string, or nil if the git command failed." (with-current-buffer buffer (cd dir) (apply #'call-process-region start end program - nil (list output-buffer nil) nil args)))) + nil (list output-buffer t) nil args)))) (defun git-run-command-buffer (buffer-name &rest args) "Run a git command, sending the output to a buffer named BUFFER-NAME." @@ -237,13 +237,15 @@ the process output as a string, or nil if the git command failed." (defun git-run-command-region (buffer start end env &rest args) "Run a git command with specified buffer region as input." - (unless (eq 0 (if env - (git-run-process-region - buffer start end "env" - (append (git-get-env-strings env) (list "git") args)) + (with-temp-buffer + (if (eq 0 (if env (git-run-process-region - buffer start end "git" args))) - (error "Failed to run \"git %s\":\n%s" (mapconcat (lambda (x) x) args " ") (buffer-string)))) + buffer start end "env" + (append (git-get-env-strings env) (list "git") args)) + (git-run-process-region buffer start end "git" args))) + (buffer-string) + (display-message-or-buffer (current-buffer)) + nil))) (defun git-run-hook (hook env &rest args) "Run a git hook and display its output if any." @@ -456,18 +458,16 @@ Each entry is a cons of (SHORT-NAME . FULL-NAME)." (setq coding-system-for-write buffer-file-coding-system)) (let ((commit (git-get-string-sha1 - (with-output-to-string - (with-current-buffer standard-output - (let ((env `(("GIT_AUTHOR_NAME" . ,author-name) - ("GIT_AUTHOR_EMAIL" . ,author-email) - ("GIT_COMMITTER_NAME" . ,(git-get-committer-name)) - ("GIT_COMMITTER_EMAIL" . ,(git-get-committer-email))))) - (when author-date (push `("GIT_AUTHOR_DATE" . ,author-date) env)) - (apply #'git-run-command-region - buffer log-start log-end env - "commit-tree" tree (nreverse args)))))))) - (and (git-update-ref "HEAD" commit head subject) - commit)))) + (let ((env `(("GIT_AUTHOR_NAME" . ,author-name) + ("GIT_AUTHOR_EMAIL" . ,author-email) + ("GIT_COMMITTER_NAME" . ,(git-get-committer-name)) + ("GIT_COMMITTER_EMAIL" . ,(git-get-committer-email))))) + (when author-date (push `("GIT_AUTHOR_DATE" . ,author-date) env)) + (apply #'git-run-command-region + buffer log-start log-end env + "commit-tree" tree (nreverse args)))))) + (when commit (git-update-ref "HEAD" commit head subject)) + commit))) (defun git-empty-db-p () "Check if the git db is empty (no commit done yet)." From efd49f50fc087df2ad46f194ca848c5335f4cca9 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Tue, 27 Jan 2009 11:59:54 +0100 Subject: [PATCH 013/149] git.el: Set a regexp for paragraph-separate in log-edit mode. This allows using fill-paragraph on the log message without interference from the various header fields. Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 1 + 1 file changed, 1 insertion(+) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 415765ec51..f86c437518 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1329,6 +1329,7 @@ Return the list of files that haven't been handled." (log-edit-diff-function . git-log-edit-diff)) buffer) (log-edit 'git-do-commit nil 'git-log-edit-files buffer)) (setq font-lock-keywords (font-lock-compile-keywords git-log-edit-font-lock-keywords)) + (setq paragraph-separate (concat (regexp-quote git-log-msg-separator) "$\\|Author: \\|Date: \\|Merge: \\|Signed-off-by: \\|\f\\|[ ]*$")) (setq buffer-file-coding-system coding-system) (re-search-forward (regexp-quote (concat git-log-msg-separator "\n")) nil t)))) From 6c4f70d5b2fb8f9275ca85e0927f00b8bc892819 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Sat, 7 Feb 2009 14:01:26 +0100 Subject: [PATCH 014/149] git.el: Use integer instead of character constants in case statement. This is for compatibility with XEmacs. Reported by Vassili Karpov. Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index f86c437518..7651a0a8e1 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -571,29 +571,29 @@ Each entry is a cons of (SHORT-NAME . FULL-NAME)." (let* ((old-type (lsh (or old-perm 0) -9)) (new-type (lsh (or new-perm 0) -9)) (str (case new-type - (?\100 ;; file + (64 ;; file (case old-type - (?\100 nil) - (?\120 " (type change symlink -> file)") - (?\160 " (type change subproject -> file)"))) - (?\120 ;; symlink + (64 nil) + (80 " (type change symlink -> file)") + (112 " (type change subproject -> file)"))) + (80 ;; symlink (case old-type - (?\100 " (type change file -> symlink)") - (?\160 " (type change subproject -> symlink)") + (64 " (type change file -> symlink)") + (112 " (type change subproject -> symlink)") (t " (symlink)"))) - (?\160 ;; subproject + (112 ;; subproject (case old-type - (?\100 " (type change file -> subproject)") - (?\120 " (type change symlink -> subproject)") + (64 " (type change file -> subproject)") + (80 " (type change symlink -> subproject)") (t " (subproject)"))) - (?\110 nil) ;; directory (internal, not a real git state) - (?\000 ;; deleted or unknown + (72 nil) ;; directory (internal, not a real git state) + (0 ;; deleted or unknown (case old-type - (?\120 " (symlink)") - (?\160 " (subproject)"))) + (80 " (symlink)") + (112 " (subproject)"))) (t (format " (unknown type %o)" new-type))))) (cond (str (propertize str 'face 'git-status-face)) - ((eq new-type ?\110) "/") + ((eq new-type 72) "/") (t "")))) (defun git-rename-as-string (info) From 5a7b3bf5275adf86fdd23f8824562b88c8a20e33 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Sat, 7 Feb 2009 14:21:58 +0100 Subject: [PATCH 015/149] git.el: Add some notes about Emacs versions compatibility. Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 7651a0a8e1..fcbe2d9cf5 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1,6 +1,6 @@ ;;; git.el --- A user interface for git -;; Copyright (C) 2005, 2006, 2007 Alexandre Julliard +;; Copyright (C) 2005, 2006, 2007, 2008, 2009 Alexandre Julliard ;; Version: 1.0 @@ -34,7 +34,6 @@ ;; To start: `M-x git-status' ;; ;; TODO -;; - portability to XEmacs ;; - diff against other branch ;; - renaming files from the status buffer ;; - creating tags @@ -43,6 +42,15 @@ ;; - git-show-branch browser ;; +;;; Compatibility: +;; +;; This file works on GNU Emacs 21 or later. It may work on older +;; versions but this is not guaranteed. +;; +;; It may work on XEmacs 21, provided that you first install the ewoc +;; and log-edit packages. +;; + (eval-when-compile (require 'cl)) (require 'ewoc) (require 'log-edit) From 7851386948dce72c739bcdfe08f069afe4f5ea45 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Sat, 7 Feb 2009 14:24:54 +0100 Subject: [PATCH 016/149] emacs: Remove the no longer maintained vc-git package. vc-git is distributed with Emacs since version 22.2, and is maintained in the Emacs CVS tree. This file is obsolete and causes trouble for people who want to add contrib/emacs to their load-path. Signed-off-by: Alexandre Julliard --- contrib/emacs/Makefile | 2 +- contrib/emacs/vc-git.el | 216 ---------------------------------------- 2 files changed, 1 insertion(+), 217 deletions(-) delete mode 100644 contrib/emacs/vc-git.el diff --git a/contrib/emacs/Makefile b/contrib/emacs/Makefile index a48540a92b..24d9312941 100644 --- a/contrib/emacs/Makefile +++ b/contrib/emacs/Makefile @@ -2,7 +2,7 @@ EMACS = emacs -ELC = git.elc vc-git.elc git-blame.elc +ELC = git.elc git-blame.elc INSTALL ?= install INSTALL_ELC = $(INSTALL) -m 644 prefix ?= $(HOME) diff --git a/contrib/emacs/vc-git.el b/contrib/emacs/vc-git.el deleted file mode 100644 index b8f6be5c0a..0000000000 --- a/contrib/emacs/vc-git.el +++ /dev/null @@ -1,216 +0,0 @@ -;;; vc-git.el --- VC backend for the git version control system - -;; Copyright (C) 2006 Alexandre Julliard - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. -;; -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. -;; -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, write to the Free -;; Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, -;; MA 02111-1307 USA - -;;; Commentary: - -;; This file contains a VC backend for the git version control -;; system. -;; -;; To install: put this file on the load-path and add GIT to the list -;; of supported backends in `vc-handled-backends'; the following line, -;; placed in your ~/.emacs, will accomplish this: -;; -;; (add-to-list 'vc-handled-backends 'GIT) -;; -;; TODO -;; - changelog generation -;; - working with revisions other than HEAD -;; - -(eval-when-compile (require 'cl)) - -(defvar git-commits-coding-system 'utf-8 - "Default coding system for git commits.") - -(defun vc-git--run-command-string (file &rest args) - "Run a git command on FILE and return its output as string." - (let* ((ok t) - (str (with-output-to-string - (with-current-buffer standard-output - (unless (eq 0 (apply #'call-process "git" nil '(t nil) nil - (append args (list (file-relative-name file))))) - (setq ok nil)))))) - (and ok str))) - -(defun vc-git--run-command (file &rest args) - "Run a git command on FILE, discarding any output." - (let ((name (file-relative-name file))) - (eq 0 (apply #'call-process "git" nil (get-buffer "*Messages") nil (append args (list name)))))) - -(defun vc-git-registered (file) - "Check whether FILE is registered with git." - (with-temp-buffer - (let* ((dir (file-name-directory file)) - (name (file-relative-name file dir))) - (and (ignore-errors - (when dir (cd dir)) - (eq 0 (call-process "git" nil '(t nil) nil "ls-files" "-c" "-z" "--" name))) - (let ((str (buffer-string))) - (and (> (length str) (length name)) - (string= (substring str 0 (1+ (length name))) (concat name "\0")))))))) - -(defun vc-git-state (file) - "git-specific version of `vc-state'." - (let ((diff (vc-git--run-command-string file "diff-index" "-z" "HEAD" "--"))) - (if (and diff (string-match ":[0-7]\\{6\\} [0-7]\\{6\\} [0-9a-f]\\{40\\} [0-9a-f]\\{40\\} [ADMU]\0[^\0]+\0" diff)) - 'edited - 'up-to-date))) - -(defun vc-git-workfile-version (file) - "git-specific version of `vc-workfile-version'." - (let ((str (with-output-to-string - (with-current-buffer standard-output - (call-process "git" nil '(t nil) nil "symbolic-ref" "HEAD"))))) - (if (string-match "^\\(refs/heads/\\)?\\(.+\\)$" str) - (match-string 2 str) - str))) - -(defun vc-git-symbolic-commit (commit) - "Translate COMMIT string into symbolic form. -Returns nil if not possible." - (and commit - (with-temp-buffer - (and - (zerop - (call-process "git" nil '(t nil) nil "name-rev" - "--name-only" "--tags" - commit)) - (goto-char (point-min)) - (= (forward-line 2) 1) - (bolp) - (buffer-substring-no-properties (point-min) (1- (point-max))))))) - -(defun vc-git-previous-version (file rev) - "git-specific version of `vc-previous-version'." - (let ((default-directory (file-name-directory (expand-file-name file))) - (file (file-name-nondirectory file))) - (vc-git-symbolic-commit - (with-temp-buffer - (and - (zerop - (call-process "git" nil '(t nil) nil "rev-list" - "-2" rev "--" file)) - (goto-char (point-max)) - (bolp) - (zerop (forward-line -1)) - (not (bobp)) - (buffer-substring-no-properties - (point) - (1- (point-max)))))))) - -(defun vc-git-next-version (file rev) - "git-specific version of `vc-next-version'." - (let* ((default-directory (file-name-directory - (expand-file-name file))) - (file (file-name-nondirectory file)) - (current-rev - (with-temp-buffer - (and - (zerop - (call-process "git" nil '(t nil) nil "rev-list" - "-1" rev "--" file)) - (goto-char (point-max)) - (bolp) - (zerop (forward-line -1)) - (bobp) - (buffer-substring-no-properties - (point) - (1- (point-max))))))) - (and current-rev - (vc-git-symbolic-commit - (with-temp-buffer - (and - (zerop - (call-process "git" nil '(t nil) nil "rev-list" - "HEAD" "--" file)) - (goto-char (point-min)) - (search-forward current-rev nil t) - (zerop (forward-line -1)) - (buffer-substring-no-properties - (point) - (progn (forward-line 1) (1- (point)))))))))) - -(defun vc-git-revert (file &optional contents-done) - "Revert FILE to the version stored in the git repository." - (if contents-done - (vc-git--run-command file "update-index" "--") - (vc-git--run-command file "checkout" "HEAD"))) - -(defun vc-git-checkout-model (file) - 'implicit) - -(defun vc-git-workfile-unchanged-p (file) - (let ((sha1 (vc-git--run-command-string file "hash-object" "--")) - (head (vc-git--run-command-string file "ls-tree" "-z" "HEAD" "--"))) - (and head - (string-match "[0-7]\\{6\\} blob \\([0-9a-f]\\{40\\}\\)\t[^\0]+\0" head) - (string= (car (split-string sha1 "\n")) (match-string 1 head))))) - -(defun vc-git-register (file &optional rev comment) - "Register FILE into the git version-control system." - (vc-git--run-command file "update-index" "--add" "--")) - -(defun vc-git-print-log (file &optional buffer) - (let ((name (file-relative-name file)) - (coding-system-for-read git-commits-coding-system)) - (vc-do-command buffer 'async "git" name "rev-list" "--pretty" "HEAD" "--"))) - -(defun vc-git-diff (file &optional rev1 rev2 buffer) - (let ((name (file-relative-name file)) - (buf (or buffer "*vc-diff*"))) - (if (and rev1 rev2) - (vc-do-command buf 0 "git" name "diff-tree" "-p" rev1 rev2 "--") - (vc-do-command buf 0 "git" name "diff-index" "-p" (or rev1 "HEAD") "--")) - ; git-diff-index doesn't set exit status like diff does - (if (vc-git-workfile-unchanged-p file) 0 1))) - -(defun vc-git-checkin (file rev comment) - (let ((coding-system-for-write git-commits-coding-system)) - (vc-git--run-command file "commit" "-m" comment "--only" "--"))) - -(defun vc-git-checkout (file &optional editable rev destfile) - (if destfile - (let ((fullname (substring - (vc-git--run-command-string file "ls-files" "-z" "--full-name" "--") - 0 -1)) - (coding-system-for-read 'no-conversion) - (coding-system-for-write 'no-conversion)) - (with-temp-file destfile - (eq 0 (call-process "git" nil t nil "cat-file" "blob" - (concat (or rev "HEAD") ":" fullname))))) - (vc-git--run-command file "checkout" (or rev "HEAD")))) - -(defun vc-git-annotate-command (file buf &optional rev) - ; FIXME: rev is ignored - (let ((name (file-relative-name file))) - (call-process "git" nil buf nil "blame" name))) - -(defun vc-git-annotate-time () - (and (re-search-forward "[0-9a-f]+ (.* \\([0-9]+\\)-\\([0-9]+\\)-\\([0-9]+\\) \\([0-9]+\\):\\([0-9]+\\):\\([0-9]+\\) \\([-+0-9]+\\) +[0-9]+)" nil t) - (vc-annotate-convert-time - (apply #'encode-time (mapcar (lambda (match) (string-to-number (match-string match))) '(6 5 4 3 2 1 7)))))) - -;; Not really useful since we can't do anything with the revision yet -;;(defun vc-annotate-extract-revision-at-line () -;; (save-excursion -;; (move-beginning-of-line 1) -;; (and (looking-at "[0-9a-f]+") -;; (buffer-substring (match-beginning 0) (match-end 0))))) - -(provide 'vc-git) From 621f1b4bcf40f1469fc59202248df35619e33c82 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sat, 7 Feb 2009 11:06:34 -0800 Subject: [PATCH 017/149] GIT 1.6.2-rc0 Signed-off-by: Junio C Hamano --- Documentation/RelNotes-1.6.2.txt | 70 +++++++++++++++++++++++++------- Documentation/git.txt | 4 +- 2 files changed, 58 insertions(+), 16 deletions(-) diff --git a/Documentation/RelNotes-1.6.2.txt b/Documentation/RelNotes-1.6.2.txt index 3151c85d88..f1bfa82749 100644 --- a/Documentation/RelNotes-1.6.2.txt +++ b/Documentation/RelNotes-1.6.2.txt @@ -1,6 +1,20 @@ GIT v1.6.2 Release Notes ======================== +With the next major release, "git push" into a branch that is +currently checked out will be refused by default. You can choose +what should happen upon such a push by setting the configuration +variable receive.denyCurrentBranch in the receiving repository. + +To ease the transition plan, the receiving repository of such a +push running this release will issue a big warning when the +configuration variable is missing. Please refer to: + + http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007 + +for more details on the transition plan. + + Updates since v1.6.1 -------------------- @@ -11,7 +25,8 @@ Updates since v1.6.1 * gitweb updates, including a new patch view and RSS/Atom feed improvements. -(portability) +* (contrib) git.el updates for better XEmacs compatibility; vc-git.el + is not shiped with git anymore (it is part of official Emacs) (performance) @@ -22,6 +37,8 @@ Updates since v1.6.1 * automatic typo correction works on aliases as well +* Initial support for "git notes" implemented. + * @{-1} is a way to refer to the last branch you were on. This is accepted not only where an object name is expected, but anywhere a branch name is expected. E.g. "git branch --track mybranch @{-1}" @@ -29,12 +46,22 @@ Updates since v1.6.1 * "git add -p" learned 'g'oto action to jump directly to a hunk. +* "git add -p" learned to find a hunk with given text with '/'. + +* "git add -p" optionally can be told to work with just the command letter + without Enter. + * when "git am" stops upon a patch that does not apply, it shows the title of the offending patch. * "git am --directory=" and "git am --reject" passes these options to underlying "git apply". +* "git am" learned --ignore-date option. + +* "git blame" aligns author names better when they are spelled in + non US-ASCII encoding. + * "git clone" now makes its best effort when cloning from an empty repository to set up configuration variables to refer to the remote repository. @@ -48,6 +75,9 @@ Updates since v1.6.1 the commit log message it serves via gitcvs.commitmsgannotation configuration. +* "git cvsserver" learned to handle 'noop' command some CVS clients seem + to expect to work. + * "git diff" learned a new option --inter-hunk-context to coalesce close hunks together and show context between them. @@ -56,21 +86,14 @@ Updates since v1.6.1 * "git diff" learned --patience to run "patience diff" algorithm. -* Some combinations of -b/-w/--ignore-space-at-eol to "git diff" did - not work as expected. - * "git filter-branch" learned --prune-empty option that discards commits that do not change the contents. +* "git fsck" now checks loose objects in alternate object stores, instead + of misreporting them as missing. + * "git grep -w" and "git grep" for fixed strings have been optimized. -* "git log" and friends include HEAD to the set of starting points - when --all is given. This makes a difference when you are not on - any branch. - -* "git ls-tree" learned --full-tree option that shows the path in full - regardless of where in the work tree hierarchy the command was started. - * "git mergetool" learned -y(--no-prompt) option to disable prompting. * "git rebase -i" can transplant a history down to root to elsewhere @@ -80,7 +103,8 @@ Updates since v1.6.1 "git checkout" switches branches, taking the local changes while switching to another commit. -(internal) +* "git tag" learned --contains that works the same way as the same option + from "git branch". Fixes since v1.6.1 @@ -89,18 +113,34 @@ Fixes since v1.6.1 All of the fixes in v1.6.1.X maintenance series are included in this release, unless otherwise noted. +Here are fixes that this release has, but have not been backported to +v1.6.1.X series. + * "git-add sub/file" when sub is a submodule incorrectly added the path to the superproject. -* git-bundle did not exclude annotated tags even when a range given from the - command line wanted to. +* "git bundle" did not exclude annotated tags even when a range given + from the command line wanted to. + +* "git filter-branch" unnecessarily refused to work when you had + checked out a different commit from what is recorded in the superproject + index in a submodule. + +* "git filter-branch" incorrectly tried to update a nonexistent work tree + at the end when it is run in a bare repository. + +* "git mergetool" used to ignore autocrlf and other attributes + based content rewriting. * branch switching and merges had a silly bug that did not validate the correct directory when making sure an existing subdirectory is clean. +* "git -p cmd" when cmd is not a built-in one left the display in funny state + when killed in the middle. + -- exec >/var/tmp/1 -O=v1.6.1.2-252-g8c95d3c +O=v1.6.1.3-371-gc19923a echo O=$(git describe master) git shortlog --no-merges $O..master ^maint diff --git a/Documentation/git.txt b/Documentation/git.txt index cd527c6252..0c7bba3fa9 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,9 +43,11 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.6.1.1/git.html[documentation for release 1.6.1.1] +* link:v1.6.1.3/git.html[documentation for release 1.6.1.3] * release notes for + link:RelNotes-1.6.1.3.txt[1.6.1.3], + link:RelNotes-1.6.1.2.txt[1.6.1.2], link:RelNotes-1.6.1.1.txt[1.6.1.1], link:RelNotes-1.6.1.txt[1.6.1]. From d3bee161fef7820e83b44b899c531228a5546e87 Mon Sep 17 00:00:00 2001 From: Lars Hjemli Date: Sun, 25 Jan 2009 01:52:05 +0100 Subject: [PATCH 018/149] tree.c: allow read_tree_recursive() to traverse gitlink entries When the callback function invoked from read_tree_recursive() returns the value `READ_TREE_RECURSIVE` for a gitlink entry, the traversal will now continue into the tree connected to the gitlinked commit. This functionality can be used to allow inter-repository operations, but since the current users of read_tree_recursive() does not yet support such operations, they have been modified where necessary to make sure that they never return READ_TREE_RECURSIVE for gitlink entries (hence no change in behaviour should be introduces by this patch alone). Signed-off-by: Lars Hjemli Signed-off-by: Junio C Hamano --- archive.c | 2 +- builtin-ls-tree.c | 9 ++------- merge-recursive.c | 2 +- tree.c | 28 ++++++++++++++++++++++++++++ 4 files changed, 32 insertions(+), 9 deletions(-) diff --git a/archive.c b/archive.c index 9ac455d889..e6de0397cc 100644 --- a/archive.c +++ b/archive.c @@ -132,7 +132,7 @@ static int write_archive_entry(const unsigned char *sha1, const char *base, err = write_entry(args, sha1, path.buf, path.len, mode, NULL, 0); if (err) return err; - return READ_TREE_RECURSIVE; + return (S_ISDIR(mode) ? READ_TREE_RECURSIVE : 0); } buffer = sha1_file_to_archive(path_without_prefix, sha1, mode, diff --git a/builtin-ls-tree.c b/builtin-ls-tree.c index 5b63e6eada..fca46312f6 100644 --- a/builtin-ls-tree.c +++ b/builtin-ls-tree.c @@ -68,13 +68,8 @@ static int show_tree(const unsigned char *sha1, const char *base, int baselen, * * Something similar to this incomplete example: * - if (show_subprojects(base, baselen, pathname)) { - struct child_process ls_tree; - - ls_tree.dir = base; - ls_tree.argv = ls-tree; - start_command(&ls_tree); - } + if (show_subprojects(base, baselen, pathname)) + retval = READ_TREE_RECURSIVE; * */ type = commit_type; diff --git a/merge-recursive.c b/merge-recursive.c index b97026bd5c..ee853b990d 100644 --- a/merge-recursive.c +++ b/merge-recursive.c @@ -237,7 +237,7 @@ static int save_files_dirs(const unsigned char *sha1, string_list_insert(newpath, &o->current_file_set); free(newpath); - return READ_TREE_RECURSIVE; + return (S_ISDIR(mode) ? READ_TREE_RECURSIVE : 0); } static int get_files_dirs(struct merge_options *o, struct tree *tree) diff --git a/tree.c b/tree.c index 03e782a9ca..dfe4d5f303 100644 --- a/tree.c +++ b/tree.c @@ -131,6 +131,34 @@ int read_tree_recursive(struct tree *tree, if (retval) return -1; continue; + } else if (S_ISGITLINK(entry.mode)) { + int retval; + struct strbuf path; + unsigned int entrylen; + struct commit *commit; + + entrylen = tree_entry_len(entry.path, entry.sha1); + strbuf_init(&path, baselen + entrylen + 1); + strbuf_add(&path, base, baselen); + strbuf_add(&path, entry.path, entrylen); + strbuf_addch(&path, '/'); + + commit = lookup_commit(entry.sha1); + if (!commit) + die("Commit %s in submodule path %s not found", + sha1_to_hex(entry.sha1), path.buf); + + if (parse_commit(commit)) + die("Invalid commit %s in submodule path %s", + sha1_to_hex(entry.sha1), path.buf); + + retval = read_tree_recursive(commit->tree, + path.buf, path.len, + stage, match, fn, context); + strbuf_release(&path); + if (retval) + return -1; + continue; } } return 0; From 2cd85c40a9f396bb24f7861c832acd52e61c4780 Mon Sep 17 00:00:00 2001 From: Johannes Sixt Date: Sat, 7 Feb 2009 16:08:27 +0100 Subject: [PATCH 019/149] Make test-path-utils more robust against incorrect use Previously, this test utility happily returned with exit code 0 if garbage was thrown at it. Now it reports failure if an unknown function name was given on the command line. Signed-off-by: Johannes Sixt Signed-off-by: Junio C Hamano --- test-path-utils.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/test-path-utils.c b/test-path-utils.c index 2c0f5a37e8..7e6fc8deaf 100644 --- a/test-path-utils.c +++ b/test-path-utils.c @@ -7,6 +7,7 @@ int main(int argc, char **argv) int rv = normalize_absolute_path(buf, argv[2]); assert(strlen(buf) == rv); puts(buf); + return 0; } if (argc >= 2 && !strcmp(argv[1], "make_absolute_path")) { @@ -15,12 +16,16 @@ int main(int argc, char **argv) argc--; argv++; } + return 0; } if (argc == 4 && !strcmp(argv[1], "longest_ancestor_length")) { int len = longest_ancestor_length(argv[2], argv[3]); printf("%d\n", len); + return 0; } - return 0; + fprintf(stderr, "%s: unknown function name: %s\n", argv[0], + argv[1] ? argv[1] : "(there was none)"); + return 1; } From f3cad0ad82e24966bf7bcc8a47670c54c30e4b18 Mon Sep 17 00:00:00 2001 From: Johannes Sixt Date: Sat, 7 Feb 2009 16:08:28 +0100 Subject: [PATCH 020/149] Move sanitary_path_copy() to path.c and rename it to normalize_path_copy() This function and normalize_absolute_path() do almost the same thing. The former already works on Windows, but the latter crashes. In subsequent changes we will remove normalize_absolute_path(). Here we make the replacement function reusable. On the way we rename it to reflect that it does some path normalization. Apart from that this is only moving around code. Signed-off-by: Johannes Sixt Signed-off-by: Junio C Hamano --- cache.h | 1 + path.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ setup.c | 88 +-------------------------------------------------------- 3 files changed, 88 insertions(+), 87 deletions(-) diff --git a/cache.h b/cache.h index 42f2f2754b..65897e7b2c 100644 --- a/cache.h +++ b/cache.h @@ -548,6 +548,7 @@ const char *make_absolute_path(const char *path); const char *make_nonrelative_path(const char *path); const char *make_relative_path(const char *abs, const char *base); int normalize_absolute_path(char *buf, const char *path); +int normalize_path_copy(char *dst, const char *src); int longest_ancestor_length(const char *path, const char *prefix_list); /* Read and unpack a sha1 file into memory, write memory to a sha1 file */ diff --git a/path.c b/path.c index a074aea649..820eab5ac3 100644 --- a/path.c +++ b/path.c @@ -415,6 +415,92 @@ int normalize_absolute_path(char *buf, const char *path) return dst - buf; } +int normalize_path_copy(char *dst, const char *src) +{ + char *dst0; + + if (has_dos_drive_prefix(src)) { + *dst++ = *src++; + *dst++ = *src++; + } + dst0 = dst; + + if (is_dir_sep(*src)) { + *dst++ = '/'; + while (is_dir_sep(*src)) + src++; + } + + for (;;) { + char c = *src; + + /* + * A path component that begins with . could be + * special: + * (1) "." and ends -- ignore and terminate. + * (2) "./" -- ignore them, eat slash and continue. + * (3) ".." and ends -- strip one and terminate. + * (4) "../" -- strip one, eat slash and continue. + */ + if (c == '.') { + if (!src[1]) { + /* (1) */ + src++; + } else if (is_dir_sep(src[1])) { + /* (2) */ + src += 2; + while (is_dir_sep(*src)) + src++; + continue; + } else if (src[1] == '.') { + if (!src[2]) { + /* (3) */ + src += 2; + goto up_one; + } else if (is_dir_sep(src[2])) { + /* (4) */ + src += 3; + while (is_dir_sep(*src)) + src++; + goto up_one; + } + } + } + + /* copy up to the next '/', and eat all '/' */ + while ((c = *src++) != '\0' && !is_dir_sep(c)) + *dst++ = c; + if (is_dir_sep(c)) { + *dst++ = '/'; + while (is_dir_sep(c)) + c = *src++; + src--; + } else if (!c) + break; + continue; + + up_one: + /* + * dst0..dst is prefix portion, and dst[-1] is '/'; + * go up one level. + */ + dst -= 2; /* go past trailing '/' if any */ + if (dst < dst0) + return -1; + while (1) { + if (dst <= dst0) + break; + c = *dst--; + if (c == '/') { /* MinGW: cannot be '\\' anymore */ + dst += 2; + break; + } + } + } + *dst = '\0'; + return 0; +} + /* * path = Canonical absolute path * prefix_list = Colon-separated list of absolute paths diff --git a/setup.c b/setup.c index 78a8041ff0..59735c1450 100644 --- a/setup.c +++ b/setup.c @@ -4,92 +4,6 @@ static int inside_git_dir = -1; static int inside_work_tree = -1; -static int sanitary_path_copy(char *dst, const char *src) -{ - char *dst0; - - if (has_dos_drive_prefix(src)) { - *dst++ = *src++; - *dst++ = *src++; - } - dst0 = dst; - - if (is_dir_sep(*src)) { - *dst++ = '/'; - while (is_dir_sep(*src)) - src++; - } - - for (;;) { - char c = *src; - - /* - * A path component that begins with . could be - * special: - * (1) "." and ends -- ignore and terminate. - * (2) "./" -- ignore them, eat slash and continue. - * (3) ".." and ends -- strip one and terminate. - * (4) "../" -- strip one, eat slash and continue. - */ - if (c == '.') { - if (!src[1]) { - /* (1) */ - src++; - } else if (is_dir_sep(src[1])) { - /* (2) */ - src += 2; - while (is_dir_sep(*src)) - src++; - continue; - } else if (src[1] == '.') { - if (!src[2]) { - /* (3) */ - src += 2; - goto up_one; - } else if (is_dir_sep(src[2])) { - /* (4) */ - src += 3; - while (is_dir_sep(*src)) - src++; - goto up_one; - } - } - } - - /* copy up to the next '/', and eat all '/' */ - while ((c = *src++) != '\0' && !is_dir_sep(c)) - *dst++ = c; - if (is_dir_sep(c)) { - *dst++ = '/'; - while (is_dir_sep(c)) - c = *src++; - src--; - } else if (!c) - break; - continue; - - up_one: - /* - * dst0..dst is prefix portion, and dst[-1] is '/'; - * go up one level. - */ - dst -= 2; /* go past trailing '/' if any */ - if (dst < dst0) - return -1; - while (1) { - if (dst <= dst0) - break; - c = *dst--; - if (c == '/') { /* MinGW: cannot be '\\' anymore */ - dst += 2; - break; - } - } - } - *dst = '\0'; - return 0; -} - const char *prefix_path(const char *prefix, int len, const char *path) { const char *orig = path; @@ -101,7 +15,7 @@ const char *prefix_path(const char *prefix, int len, const char *path) memcpy(sanitized, prefix, len); strcpy(sanitized + len, path); } - if (sanitary_path_copy(sanitized, sanitized)) + if (normalize_path_copy(sanitized, sanitized)) goto error_out; if (is_absolute_path(orig)) { const char *work_tree = get_git_work_tree(); From 43a7ddb55d82d5c6f0c4d2cbe408a1df71d58ef3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ren=C3=A9=20Scharfe?= Date: Sat, 7 Feb 2009 16:08:29 +0100 Subject: [PATCH 021/149] Fix GIT_CEILING_DIRECTORIES on Windows Using git with GIT_CEILING_DIRECTORIES crashed on Windows due to a failed assertion in normalize_absolute_path(): This function expects absolute paths to start with a slash, while on Windows they can start with a drive letter or a backslash. This fixes it by using the alternative, normalize_path_copy() instead, which can handle Windows-style paths just fine. Secondly, the portability macro PATH_SEP is used instead of expecting colons to be used as path list delimiter. The test script t1504 is also changed to help MSYS's bash recognize some program arguments as path list. (MSYS's bash must translate POSIX-style path lists to Windows-style path lists, and the heuristic did not catch some cases.) Signed-off-by: Rene Scharfe Signed-off-by: Johannes Sixt Signed-off-by: Junio C Hamano --- path.c | 11 ++++++----- t/t1504-ceiling-dirs.sh | 6 +++--- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/path.c b/path.c index 820eab5ac3..79c5c104c3 100644 --- a/path.c +++ b/path.c @@ -524,15 +524,16 @@ int longest_ancestor_length(const char *path, const char *prefix_list) return -1; for (colon = ceil = prefix_list; *colon; ceil = colon+1) { - for (colon = ceil; *colon && *colon != ':'; colon++); + for (colon = ceil; *colon && *colon != PATH_SEP; colon++); len = colon - ceil; if (len == 0 || len > PATH_MAX || !is_absolute_path(ceil)) continue; strlcpy(buf, ceil, len+1); - len = normalize_absolute_path(buf, buf); - /* Strip "trailing slashes" from "/". */ - if (len == 1) - len = 0; + if (normalize_path_copy(buf, buf) < 0) + continue; + len = strlen(buf); + if (len > 0 && buf[len-1] == '/') + buf[--len] = '\0'; if (!strncmp(path, buf, len) && path[len] == '/' && diff --git a/t/t1504-ceiling-dirs.sh b/t/t1504-ceiling-dirs.sh index 91b704a3a4..e377d48902 100755 --- a/t/t1504-ceiling-dirs.sh +++ b/t/t1504-ceiling-dirs.sh @@ -93,13 +93,13 @@ GIT_CEILING_DIRECTORIES="$TRASH_ROOT/subdi" test_prefix subdir_ceil_at_subdi_slash "sub/dir/" -GIT_CEILING_DIRECTORIES="foo:$TRASH_ROOT/sub" +GIT_CEILING_DIRECTORIES="/foo:$TRASH_ROOT/sub" test_fail second_of_two -GIT_CEILING_DIRECTORIES="$TRASH_ROOT/sub:bar" +GIT_CEILING_DIRECTORIES="$TRASH_ROOT/sub:/bar" test_fail first_of_two -GIT_CEILING_DIRECTORIES="foo:$TRASH_ROOT/sub:bar" +GIT_CEILING_DIRECTORIES="/foo:$TRASH_ROOT/sub:/bar" test_fail second_of_three From f42302b49333d035a323f5d80fb9562d375b17f1 Mon Sep 17 00:00:00 2001 From: Johannes Sixt Date: Sat, 7 Feb 2009 16:08:30 +0100 Subject: [PATCH 022/149] Test and fix normalize_path_copy() This changes the test-path-utils utility to invoke normalize_path_copy() instead of normalize_absolute_path() because the latter is about to be removed. The test cases in t0060 are adjusted in two regards: - normalize_path_copy() more often leaves a trailing slash in the result. This has no negative side effects because the new user of this function, longest_ancester_length(), already accounts for this behavior. - The function can fail. The tests uncover a flaw in normalize_path_copy(): If there are sufficiently many '..' path components so that the root is reached, such as in "/d1/s1/../../d2", then the leading slash was lost. This manifested itself that (assuming there is a repository at /tmp/foo) $ git add /d1/../tmp/foo/some-file reported 'pathspec is outside repository'. This is now fixed. Moreover, the test case descriptions of t0060 now include the test data and expected outcome. Signed-off-by: Johannes Sixt Signed-off-by: Junio C Hamano --- path.c | 16 +++++----------- t/t0060-path-utils.sh | 33 +++++++++++++++++---------------- test-path-utils.c | 7 ++++--- 3 files changed, 26 insertions(+), 30 deletions(-) diff --git a/path.c b/path.c index 79c5c104c3..6b7be5b869 100644 --- a/path.c +++ b/path.c @@ -484,18 +484,12 @@ int normalize_path_copy(char *dst, const char *src) * dst0..dst is prefix portion, and dst[-1] is '/'; * go up one level. */ - dst -= 2; /* go past trailing '/' if any */ - if (dst < dst0) + dst--; /* go to trailing '/' */ + if (dst <= dst0) return -1; - while (1) { - if (dst <= dst0) - break; - c = *dst--; - if (c == '/') { /* MinGW: cannot be '\\' anymore */ - dst += 2; - break; - } - } + /* Windows: dst[-1] cannot be backslash anymore */ + while (dst0 < dst && dst[-1] != '/') + dst--; } *dst = '\0'; return 0; diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index 6e7501f352..4ed1f0b4dd 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -8,36 +8,37 @@ test_description='Test various path utilities' . ./test-lib.sh norm_abs() { - test_expect_success "normalize absolute" \ - "test \$(test-path-utils normalize_absolute_path '$1') = '$2'" + test_expect_success "normalize absolute: $1 => $2" \ + "test \"\$(test-path-utils normalize_path_copy '$1')\" = '$2'" } ancestor() { - test_expect_success "longest ancestor" \ - "test \$(test-path-utils longest_ancestor_length '$1' '$2') = '$3'" + test_expect_success "longest ancestor: $1 $2 => $3" \ + "test \"\$(test-path-utils longest_ancestor_length '$1' '$2')\" = '$3'" } -norm_abs "" / +norm_abs "" "" norm_abs / / norm_abs // / norm_abs /// / norm_abs /. / norm_abs /./ / -norm_abs /./.. / -norm_abs /../. / -norm_abs /./../.// / +norm_abs /./.. ++failed++ +norm_abs /../. ++failed++ +norm_abs /./../.// ++failed++ norm_abs /dir/.. / norm_abs /dir/sub/../.. / +norm_abs /dir/sub/../../.. ++failed++ norm_abs /dir /dir -norm_abs /dir// /dir +norm_abs /dir// /dir/ norm_abs /./dir /dir -norm_abs /dir/. /dir -norm_abs /dir///./ /dir -norm_abs /dir//sub/.. /dir -norm_abs /dir/sub/../ /dir -norm_abs //dir/sub/../. /dir -norm_abs /dir/s1/../s2/ /dir/s2 -norm_abs /d1/s1///s2/..//../s3/ /d1/s3 +norm_abs /dir/. /dir/ +norm_abs /dir///./ /dir/ +norm_abs /dir//sub/.. /dir/ +norm_abs /dir/sub/../ /dir/ +norm_abs //dir/sub/../. /dir/ +norm_abs /dir/s1/../s2/ /dir/s2/ +norm_abs /d1/s1///s2/..//../s3/ /d1/s3/ norm_abs /d1/s1//../s2/../../d2 /d2 norm_abs /d1/.../d2 /d1/.../d2 norm_abs /d1/..././../d2 /d1/d2 diff --git a/test-path-utils.c b/test-path-utils.c index 7e6fc8deaf..5168a8e3df 100644 --- a/test-path-utils.c +++ b/test-path-utils.c @@ -2,10 +2,11 @@ int main(int argc, char **argv) { - if (argc == 3 && !strcmp(argv[1], "normalize_absolute_path")) { + if (argc == 3 && !strcmp(argv[1], "normalize_path_copy")) { char *buf = xmalloc(PATH_MAX + 1); - int rv = normalize_absolute_path(buf, argv[2]); - assert(strlen(buf) == rv); + int rv = normalize_path_copy(buf, argv[2]); + if (rv) + buf = "++failed++"; puts(buf); return 0; } From f2a782b8ba189b5ed51d18aa3eb93a670c220018 Mon Sep 17 00:00:00 2001 From: Johannes Sixt Date: Sat, 7 Feb 2009 16:08:31 +0100 Subject: [PATCH 023/149] Remove unused normalize_absolute_path() This function is now superseded by normalize_path_copy(). Signed-off-by: Johannes Sixt Signed-off-by: Junio C Hamano --- cache.h | 1 - path.c | 51 ++++++--------------------------------------------- 2 files changed, 6 insertions(+), 46 deletions(-) diff --git a/cache.h b/cache.h index 65897e7b2c..39f0d6fea4 100644 --- a/cache.h +++ b/cache.h @@ -547,7 +547,6 @@ static inline int is_absolute_path(const char *path) const char *make_absolute_path(const char *path); const char *make_nonrelative_path(const char *path); const char *make_relative_path(const char *abs, const char *base); -int normalize_absolute_path(char *buf, const char *path); int normalize_path_copy(char *dst, const char *src); int longest_ancestor_length(const char *path, const char *prefix_list); diff --git a/path.c b/path.c index 6b7be5b869..4b9107fed1 100644 --- a/path.c +++ b/path.c @@ -363,58 +363,19 @@ const char *make_relative_path(const char *abs, const char *base) } /* - * path = absolute path - * buf = buffer of at least max(2, strlen(path)+1) bytes - * It is okay if buf == path, but they should not overlap otherwise. + * It is okay if dst == src, but they should not overlap otherwise. * - * Performs the following normalizations on path, storing the result in buf: - * - Removes trailing slashes. - * - Removes empty components. + * Performs the following normalizations on src, storing the result in dst: + * - Ensures that components are separated by '/' (Windows only) + * - Squashes sequences of '/'. * - Removes "." components. * - Removes ".." components, and the components the precede them. - * "" and paths that contain only slashes are normalized to "/". - * Returns the length of the output. + * Returns failure (non-zero) if a ".." component appears as first path + * component anytime during the normalization. Otherwise, returns success (0). * * Note that this function is purely textual. It does not follow symlinks, * verify the existence of the path, or make any system calls. */ -int normalize_absolute_path(char *buf, const char *path) -{ - const char *comp_start = path, *comp_end = path; - char *dst = buf; - int comp_len; - assert(buf); - assert(path); - - while (*comp_start) { - assert(*comp_start == '/'); - while (*++comp_end && *comp_end != '/') - ; /* nothing */ - comp_len = comp_end - comp_start; - - if (!strncmp("/", comp_start, comp_len) || - !strncmp("/.", comp_start, comp_len)) - goto next; - - if (!strncmp("/..", comp_start, comp_len)) { - while (dst > buf && *--dst != '/') - ; /* nothing */ - goto next; - } - - memmove(dst, comp_start, comp_len); - dst += comp_len; - next: - comp_start = comp_end; - } - - if (dst == buf) - *dst++ = '/'; - - *dst = '\0'; - return dst - buf; -} - int normalize_path_copy(char *dst, const char *src) { char *dst0; From f3670a5749d704fe1edee4201f9b23adbf0bf967 Mon Sep 17 00:00:00 2001 From: Johannes Schindelin Date: Sat, 7 Feb 2009 14:43:03 +0100 Subject: [PATCH 024/149] Let ls-files strip trailing slashes in submodules' paths Tab completion makes it easy to add a trailing slash to a submodule path. As it is completely clear what the user actually wanted to say, be nice and strip that slash at the end. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano --- builtin-ls-files.c | 21 ++++++++++++++++++++- t/t7400-submodule-basic.sh | 6 ++++++ 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/builtin-ls-files.c b/builtin-ls-files.c index 3434031295..9dec282fba 100644 --- a/builtin-ls-files.c +++ b/builtin-ls-files.c @@ -262,6 +262,21 @@ static const char *verify_pathspec(const char *prefix) return max ? xmemdupz(prev, max) : NULL; } +static void strip_trailing_slash_from_submodules(void) +{ + const char **p; + + for (p = pathspec; *p != NULL; p++) { + int len = strlen(*p), pos; + + if (len < 1 || (*p)[len - 1] != '/') + continue; + pos = cache_name_pos(*p, len - 1); + if (pos >= 0 && S_ISGITLINK(active_cache[pos]->ce_mode)) + *p = xstrndup(*p, len - 1); + } +} + /* * Read the tree specified with --with-tree option * (typically, HEAD) into stage #1 and then @@ -510,6 +525,11 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) pathspec = get_pathspec(prefix, argv + i); + /* be nice with submodule patsh ending in a slash */ + read_cache(); + if (pathspec) + strip_trailing_slash_from_submodules(); + /* Verify that the pathspec matches the prefix */ if (pathspec) prefix = verify_pathspec(prefix); @@ -533,7 +553,6 @@ int cmd_ls_files(int argc, const char **argv, const char *prefix) show_killed | show_modified)) show_cached = 1; - read_cache(); if (prefix) prune_cache(prefix); if (with_tree) { diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 2ec7ac6a51..a74f24c0db 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -234,4 +234,10 @@ test_expect_success 'gracefully add submodule with a trailing slash' ' ' +test_expect_success 'ls-files gracefully handles trailing slash' ' + + test "init" = "$(git ls-files init/)" + +' + test_done From 496917b721adae11e596cd44b13cb8a49c388de7 Mon Sep 17 00:00:00 2001 From: Johannes Schindelin Date: Sat, 7 Feb 2009 14:43:15 +0100 Subject: [PATCH 025/149] submodule: warn about non-submodules Earlier, when you called git submodule some/bogus/path Git would silently ignore the path, without warning the user about the likely mistake. Now it does. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano --- git-submodule.sh | 2 +- t/t7400-submodule-basic.sh | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/git-submodule.sh b/git-submodule.sh index 2f47e065fe..6cc2d334c0 100755 --- a/git-submodule.sh +++ b/git-submodule.sh @@ -59,7 +59,7 @@ resolve_relative_url () # module_list() { - git ls-files --stage -- "$@" | grep '^160000 ' + git ls-files --error-unmatch --stage -- "$@" | grep '^160000 ' } # diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index a74f24c0db..b8cb2df667 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -240,4 +240,11 @@ test_expect_success 'ls-files gracefully handles trailing slash' ' ' +test_expect_success 'submodule warns' ' + + git submodule no-such-submodule 2> output.err && + grep "^error: .*no-such-submodule" output.err + +' + test_done From ccb04f99fe3858bae0f06fc7aeefc4d53fec1352 Mon Sep 17 00:00:00 2001 From: Jakub Narebski Date: Fri, 6 Feb 2009 10:12:41 +0100 Subject: [PATCH 026/149] gitweb: Better regexp for SHA-1 committag match Make SHA-1 regexp to be turned into hyperlink (the SHA-1 committag) to match word boundary at the beginning and the end. This way we reduce number of false matches, for example we now don't match 0x74a5cd01 which is hex decimal (for example memory address), but is not SHA-1. Suggested-by: Johannes Schindelin Signed-off-by: Jakub Narebski Signed-off-by: Junio C Hamano --- gitweb/gitweb.perl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index f27dbb6bf4..bec1af6b73 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -1364,7 +1364,7 @@ sub format_log_line_html { my $line = shift; $line = esc_html($line, -nbsp=>1); - if ($line =~ m/([0-9a-fA-F]{8,40})/) { + if ($line =~ m/\b([0-9a-fA-F]{8,40})\b/) { my $hash_text = $1; my $link = $cgi->a({-href => href(action=>"object", hash=>$hash_text), From d551a488169aeb2ac09dba781f2ffbecf3425996 Mon Sep 17 00:00:00 2001 From: Marius Storm-Olsen Date: Sun, 8 Feb 2009 15:34:27 +0100 Subject: [PATCH 027/149] Add mailmap.file as configurational option for mailmap location This allows us to augment the repo mailmap file, and to use mailmap files elsewhere than the repository root. Meaning that the entries in mailmap.file will override the entries in "./.mailmap", should they match. Signed-off-by: Marius Storm-Olsen Signed-off-by: Junio C Hamano --- Documentation/config.txt | 8 +++ Documentation/git-shortlog.txt | 3 +- builtin-blame.c | 2 +- builtin-shortlog.c | 3 +- cache.h | 1 + config.c | 12 ++++ mailmap.c | 12 +++- mailmap.h | 2 +- pretty.c | 2 +- t/t4203-mailmap.sh | 109 +++++++++++++++++++++++++++++++++ 10 files changed, 147 insertions(+), 7 deletions(-) create mode 100755 t/t4203-mailmap.sh diff --git a/Documentation/config.txt b/Documentation/config.txt index e2b8775dd3..6dd57bd52c 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -1012,6 +1012,14 @@ log.showroot:: Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which normally hide the root commit will now show it. True by default. +mailmap.file:: + The location of an augmenting mailmap file. The default + mailmap, located in the root of the repository, is loaded + first, then the mailmap file pointed to by this variable. + The location of the mailmap file may be in a repository + subdirectory, or somewhere outside of the repository itself. + See linkgit:git-shortlog[1] and linkgit:git-blame[1]. + man.viewer:: Specify the programs that may be used to display help in the 'man' format. See linkgit:git-help[1]. diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index 498bd28929..66b6045849 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -48,7 +48,8 @@ OPTIONS FILES ----- -If a file `.mailmap` exists at the toplevel of the repository, +If a file `.mailmap` exists at the toplevel of the repository, or at the +location pointed to by the log.mailmap configuration option, it is used to map an author email address to a canonical real name. This can be used to coalesce together commits by the same person where their name was spelled differently (whether with the same email address or diff --git a/builtin-blame.c b/builtin-blame.c index aae14ef8bb..19edcf33b1 100644 --- a/builtin-blame.c +++ b/builtin-blame.c @@ -2394,7 +2394,7 @@ parse_done: die("reading graft file %s failed: %s", revs_file, strerror(errno)); - read_mailmap(&mailmap, ".mailmap", NULL); + read_mailmap(&mailmap, NULL); if (!incremental) setup_pager(); diff --git a/builtin-shortlog.c b/builtin-shortlog.c index 5f9f3f09b1..314b6bc5c7 100644 --- a/builtin-shortlog.c +++ b/builtin-shortlog.c @@ -219,7 +219,7 @@ void shortlog_init(struct shortlog *log) { memset(log, 0, sizeof(*log)); - read_mailmap(&log->mailmap, ".mailmap", &log->common_repo_prefix); + read_mailmap(&log->mailmap, &log->common_repo_prefix); log->list.strdup_strings = 1; log->wrap = DEFAULT_WRAPLEN; @@ -248,6 +248,7 @@ int cmd_shortlog(int argc, const char **argv, const char *prefix) struct parse_opt_ctx_t ctx; prefix = setup_git_directory_gently(&nongit); + git_config(git_default_config, NULL); shortlog_init(&log); init_revisions(&rev, prefix); parse_options_start(&ctx, argc, argv, PARSE_OPT_KEEP_DASHDASH | diff --git a/cache.h b/cache.h index 45e713e928..e88bcca96d 100644 --- a/cache.h +++ b/cache.h @@ -867,6 +867,7 @@ extern int user_ident_explicitly_given; extern const char *git_commit_encoding; extern const char *git_log_output_encoding; +extern const char *git_mailmap_file; /* IO helper functions */ extern void maybe_flush_or_die(FILE *, const char *); diff --git a/config.c b/config.c index 790405a213..0c8c76f13b 100644 --- a/config.c +++ b/config.c @@ -565,6 +565,15 @@ static int git_default_branch_config(const char *var, const char *value) return 0; } +static int git_default_mailmap_config(const char *var, const char *value) +{ + if (!strcmp(var, "mailmap.file")) + return git_config_string(&git_mailmap_file, var, value); + + /* Add other config variables here and to Documentation/config.txt. */ + return 0; +} + int git_default_config(const char *var, const char *value, void *dummy) { if (!prefixcmp(var, "core.")) @@ -579,6 +588,9 @@ int git_default_config(const char *var, const char *value, void *dummy) if (!prefixcmp(var, "branch.")) return git_default_branch_config(var, value); + if (!prefixcmp(var, "mailmap.")) + return git_default_mailmap_config(var, value); + if (!strcmp(var, "pager.color") || !strcmp(var, "color.pager")) { pager_use_color = git_config_bool(var,value); return 0; diff --git a/mailmap.c b/mailmap.c index 88fc6f3946..d006dad673 100644 --- a/mailmap.c +++ b/mailmap.c @@ -2,10 +2,11 @@ #include "string-list.h" #include "mailmap.h" -int read_mailmap(struct string_list *map, const char *filename, char **repo_abbrev) +const char *git_mailmap_file; +static int read_single_mailmap(struct string_list *map, const char *filename, char **repo_abbrev) { char buffer[1024]; - FILE *f = fopen(filename, "r"); + FILE *f = (filename == NULL ? NULL : fopen(filename, "r")); if (f == NULL) return 1; @@ -60,6 +61,13 @@ int read_mailmap(struct string_list *map, const char *filename, char **repo_abbr return 0; } +int read_mailmap(struct string_list *map, char **repo_abbrev) +{ + /* each failure returns 1, so >1 means both calls failed */ + return read_single_mailmap(map, ".mailmap", repo_abbrev) + + read_single_mailmap(map, git_mailmap_file, repo_abbrev) > 1; +} + int map_email(struct string_list *map, const char *email, char *name, int maxlen) { char *p; diff --git a/mailmap.h b/mailmap.h index 6e48f83ced..ba2ee7670c 100644 --- a/mailmap.h +++ b/mailmap.h @@ -1,7 +1,7 @@ #ifndef MAILMAP_H #define MAILMAP_H -int read_mailmap(struct string_list *map, const char *filename, char **repo_abbrev); +int read_mailmap(struct string_list *map, char **repo_abbrev); int map_email(struct string_list *mailmap, const char *email, char *name, int maxlen); #endif diff --git a/pretty.c b/pretty.c index cc460b5697..9e03d6ae2d 100644 --- a/pretty.c +++ b/pretty.c @@ -312,7 +312,7 @@ static int mailmap_name(struct strbuf *sb, const char *email) if (!mail_map) { mail_map = xcalloc(1, sizeof(*mail_map)); - read_mailmap(mail_map, ".mailmap", NULL); + read_mailmap(mail_map, NULL); } if (!mail_map->nr) diff --git a/t/t4203-mailmap.sh b/t/t4203-mailmap.sh new file mode 100755 index 0000000000..fc50ac22e3 --- /dev/null +++ b/t/t4203-mailmap.sh @@ -0,0 +1,109 @@ +#!/bin/sh + +test_description='.mailmap configurations' + +. ./test-lib.sh + +test_expect_success setup ' + echo one >one && + git add one && + test_tick && + git commit -m initial && + echo two >>one && + git add one && + git commit --author "nick1 " -m second +' + +cat >expect <<\EOF +A U Thor (1): + initial + +nick1 (1): + second + +EOF + +test_expect_success 'No mailmap' ' + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF +Repo Guy (1): + initial + +nick1 (1): + second + +EOF + +test_expect_success 'default .mailmap' ' + echo "Repo Guy " > .mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +# Using a mailmap file in a subdirectory of the repo here, but +# could just as well have been a file outside of the repository +cat >expect <<\EOF +Internal Guy (1): + second + +Repo Guy (1): + initial + +EOF +test_expect_success 'mailmap.file set' ' + mkdir internal_mailmap && + echo "Internal Guy " > internal_mailmap/.mailmap && + git config mailmap.file internal_mailmap/.mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF +External Guy (1): + initial + +Internal Guy (1): + second + +EOF +test_expect_success 'mailmap.file override' ' + echo "External Guy " >> internal_mailmap/.mailmap && + git config mailmap.file internal_mailmap/.mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF +Repo Guy (1): + initial + +nick1 (1): + second + +EOF + +test_expect_success 'mailmap.file non-existant' ' + rm internal_mailmap/.mailmap && + rmdir internal_mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF +A U Thor (1): + initial + +nick1 (1): + second + +EOF +test_expect_success 'No mailmap files, but configured' ' + rm .mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +test_done From cfa1ee6b340172a415049704cd848593392b9064 Mon Sep 17 00:00:00 2001 From: Marius Storm-Olsen Date: Sun, 8 Feb 2009 15:34:28 +0100 Subject: [PATCH 028/149] Add find_insert_index, insert_at_index and clear_func functions to string_list string_list_find_insert_index() and string_list_insert_at_index() enables you to see if an item is in the string_list, and to insert at the appropriate index in the list, if not there. This is usefull if you need to manipulate an existing item, if present, and insert a new item if not. Future mailmap code will use this construct to enable complex (old_name, old_email) -> (new_name, new_email) lookups. The string_list_clear_func() allows to call a custom cleanup function on each item in a string_list, which is useful is the util member points to a complex structure. Signed-off-by: Marius Storm-Olsen Signed-off-by: Junio C Hamano --- string-list.c | 43 +++++++++++++++++++++++++++++++++++++++---- string-list.h | 9 +++++++++ 2 files changed, 48 insertions(+), 4 deletions(-) diff --git a/string-list.c b/string-list.c index ddd83c8c76..15e14cf47a 100644 --- a/string-list.c +++ b/string-list.c @@ -26,10 +26,10 @@ static int get_entry_index(const struct string_list *list, const char *string, } /* returns -1-index if already exists */ -static int add_entry(struct string_list *list, const char *string) +static int add_entry(int insert_at, struct string_list *list, const char *string) { - int exact_match; - int index = get_entry_index(list, string, &exact_match); + int exact_match = 0; + int index = insert_at != -1 ? insert_at : get_entry_index(list, string, &exact_match); if (exact_match) return -1 - index; @@ -53,7 +53,13 @@ static int add_entry(struct string_list *list, const char *string) struct string_list_item *string_list_insert(const char *string, struct string_list *list) { - int index = add_entry(list, string); + return string_list_insert_at_index(-1, string, list); +} + +struct string_list_item *string_list_insert_at_index(int insert_at, + const char *string, struct string_list *list) +{ + int index = add_entry(insert_at, list, string); if (index < 0) index = -1 - index; @@ -68,6 +74,16 @@ int string_list_has_string(const struct string_list *list, const char *string) return exact_match; } +int string_list_find_insert_index(const struct string_list *list, const char *string, + int negative_existing_index) +{ + int exact_match; + int index = get_entry_index(list, string, &exact_match); + if (exact_match) + index = -1 - (negative_existing_index ? index : 0); + return index; +} + struct string_list_item *string_list_lookup(const char *string, struct string_list *list) { int exact_match, i = get_entry_index(list, string, &exact_match); @@ -94,6 +110,25 @@ void string_list_clear(struct string_list *list, int free_util) list->nr = list->alloc = 0; } +void string_list_clear_func(struct string_list *list, string_list_clear_func_t clearfunc) +{ + if (list->items) { + int i; + if (clearfunc) { + for (i = 0; i < list->nr; i++) + clearfunc(list->items[i].util, list->items[i].string); + } + if (list->strdup_strings) { + for (i = 0; i < list->nr; i++) + free(list->items[i].string); + } + free(list->items); + } + list->items = NULL; + list->nr = list->alloc = 0; +} + + void print_string_list(const char *text, const struct string_list *p) { int i; diff --git a/string-list.h b/string-list.h index 4d6a7051fe..d32ba05202 100644 --- a/string-list.h +++ b/string-list.h @@ -15,9 +15,18 @@ struct string_list void print_string_list(const char *text, const struct string_list *p); void string_list_clear(struct string_list *list, int free_util); +/* Use this function to call a custom clear function on each util pointer */ +/* The string associated with the util pointer is passed as the second argument */ +typedef void (*string_list_clear_func_t)(void *p, const char *str); +void string_list_clear_func(struct string_list *list, string_list_clear_func_t clearfunc); + /* Use these functions only on sorted lists: */ int string_list_has_string(const struct string_list *list, const char *string); +int string_list_find_insert_index(const struct string_list *list, const char *string, + int negative_existing_index); struct string_list_item *string_list_insert(const char *string, struct string_list *list); +struct string_list_item *string_list_insert_at_index(int insert_at, + const char *string, struct string_list *list); struct string_list_item *string_list_lookup(const char *string, struct string_list *list); /* Use these functions only on unsorted lists: */ From 0925ce4d49ef8352617e8f56231bd36802a2f138 Mon Sep 17 00:00:00 2001 From: Marius Storm-Olsen Date: Sun, 8 Feb 2009 15:34:29 +0100 Subject: [PATCH 029/149] Add map_user() and clear_mailmap() to mailmap map_user() allows to lookup and replace both email and name of a user, based on a new style mailmap file. The possible mailmap definitions are now: proper_name # Old style # New style proper_name # New style proper_name commit_name # New style map_email() operates the same as before, with the exception that it also will to try to match on a name passed in through the name return buffer. clear_mailmap() is needed to now clear the more complex mailmap structure. Signed-off-by: Marius Storm-Olsen Signed-off-by: Junio C Hamano --- Documentation/git-shortlog.txt | 81 ++++++++++---- mailmap.c | 196 ++++++++++++++++++++++++++++----- mailmap.h | 4 + 3 files changed, 233 insertions(+), 48 deletions(-) diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index 66b6045849..a0eaab5250 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -48,24 +48,38 @@ OPTIONS FILES ----- -If a file `.mailmap` exists at the toplevel of the repository, or at the -location pointed to by the log.mailmap configuration option, -it is used to map an author email address to a canonical real name. This -can be used to coalesce together commits by the same person where their -name was spelled differently (whether with the same email address or -not). +If the file `.mailmap` exists at the toplevel of the repository, or at +the location pointed to by the mailmap.file configuration option, it +is used to map author and committer names and email addresses to +canonical real names and email addresses. +This mapping can be used to coalesce together commits by the same +person where their name and/or email address was spelled differently. -Each line in the file consists, in this order, of the canonical real name -of an author, whitespace, and an email address (enclosed by '<' and '>') -to map to the name. Use hash '#' for comments, either on their own line, -or after the email address. +In the simple form, each line in the file consists of the canonical +real name of an author, whitespace, and an email address used in the +commit (enclosed by '<' and '>') to map to the name. Thus, looks like +this +-- + Proper Name +-- -A canonical name may appear in more than one line, associated with -different email addresses, but it doesn't make sense for a given address -to appear more than once (if that happens, a later line overrides the -earlier ones). +The more complex forms are +-- + +-- +which allows mailmap to replace only the email part of a commit, and +-- + Proper Name +-- +which allows mailmap to replace both the name and the email of a +commit matching the specified commit email address, and +-- + Proper Name Commit Name +-- +which allows mailmap to replace both the name and the email of a +commit matching both the specified commit name and email address. -So, for example, if your history contains commits by two authors, Jane +Example 1: Your history contains commits by two authors, Jane and Joe, whose names appear in the repository under several forms: ------------ @@ -76,16 +90,43 @@ Jane Doe Jane D. ------------ -Then, supposing Joe wants his middle name initial used, and Jane prefers -her family name fully spelled out, a proper `.mailmap` file would look like: +Now suppose that Joe wants his middle name initial used, and Jane +prefers her family name fully spelled out. A proper `.mailmap` file +would look like: ------------ -# Note how we don't need an entry for , because the -# real name of that author is correct already, and coalesced directly. -Jane Doe +Jane Doe Joe R. Developer ------------ +Note how we don't need an entry for , because the +real name of that author is correct already, and coalesced directly. + +Example 2: Your repository contains commits from the following +authors: + +------------ +nick1 +nick2 +nick2 +santa +claus +CTO +------------ + +Then, you might want a `.mailmap` file looking like: +------------ + +Some Dude nick1 +Other Author nick2 +Other Author +Santa Claus +------------ + +Use hash '#' for comments that are either on their own line, or after +the email address. + + Author ------ Written by Jeff Garzik diff --git a/mailmap.c b/mailmap.c index d006dad673..f12bb45a3f 100644 --- a/mailmap.c +++ b/mailmap.c @@ -2,7 +2,122 @@ #include "string-list.h" #include "mailmap.h" +#define DEBUG_MAILMAP 0 +#if DEBUG_MAILMAP +#define debug_mm(...) fprintf(stderr, __VA_ARGS__) +#else +static inline void debug_mm(const char *format, ...) {} +#endif + const char *git_mailmap_file; + +struct mailmap_info { + char *name; + char *email; +}; + +struct mailmap_entry { + /* name and email for the simple mail-only case */ + char *name; + char *email; + + /* name and email for the complex mail and name matching case */ + struct string_list namemap; +}; + +static void free_mailmap_info(void *p, const char *s) +{ + struct mailmap_info *mi = (struct mailmap_info *)p; + debug_mm("mailmap: -- complex: '%s' -> '%s' <%s>\n", s, mi->name, mi->email); + free(mi->name); + free(mi->email); +} + +static void free_mailmap_entry(void *p, const char *s) +{ + struct mailmap_entry *me = (struct mailmap_entry *)p; + debug_mm("mailmap: removing entries for <%s>, with %d sub-entries\n", s, me->namemap.nr); + debug_mm("mailmap: - simple: '%s' <%s>\n", me->name, me->email); + free(me->name); + free(me->email); + + me->namemap.strdup_strings = 1; + string_list_clear_func(&me->namemap, free_mailmap_info); +} + +static void add_mapping(struct string_list *map, + char *new_name, char *new_email, char *old_name, char *old_email) +{ + struct mailmap_entry *me; + int index; + if (old_email == NULL) { + old_email = new_email; + new_email = NULL; + } + + if ((index = string_list_find_insert_index(map, old_email, 1)) < 0) { + /* mailmap entry exists, invert index value */ + index = -1 - index; + } else { + /* create mailmap entry */ + struct string_list_item *item = string_list_insert_at_index(index, old_email, map); + item->util = xmalloc(sizeof(struct mailmap_entry)); + memset(item->util, 0, sizeof(struct mailmap_entry)); + ((struct mailmap_entry *)item->util)->namemap.strdup_strings = 1; + } + me = (struct mailmap_entry *)map->items[index].util; + + if (old_name == NULL) { + debug_mm("mailmap: adding (simple) entry for %s at index %d\n", old_email, index); + /* Replace current name and new email for simple entry */ + free(me->name); + free(me->email); + if (new_name) + me->name = xstrdup(new_name); + if (new_email) + me->email = xstrdup(new_email); + } else { + struct mailmap_info *mi = xmalloc(sizeof(struct mailmap_info)); + debug_mm("mailmap: adding (complex) entry for %s at index %d\n", old_email, index); + if (new_name) + mi->name = xstrdup(new_name); + if (new_email) + mi->email = xstrdup(new_email); + string_list_insert(old_name, &me->namemap)->util = mi; + } + + debug_mm("mailmap: '%s' <%s> -> '%s' <%s>\n", + old_name, old_email, new_name, new_email); +} + +static char *parse_name_and_email(char *buffer, char **name, char **email) +{ + char *left, *right, *nstart, *nend; + *name = *email = 0; + + if ((left = strchr(buffer, '<')) == NULL) + return NULL; + if ((right = strchr(left+1, '>')) == NULL) + return NULL; + if (left+1 == right) + return NULL; + + /* remove whitespace from beginning and end of name */ + nstart = buffer; + while (isspace(*nstart) && nstart < left) + ++nstart; + nend = left-1; + while (isspace(*nend) && nend > nstart) + --nend; + + *name = (nstart < nend ? nstart : NULL); + *email = left+1; + *(nend+1) = '\0'; + *right++ = '\0'; + + return (*right == '\0' ? NULL : right); +} + static int read_single_mailmap(struct string_list *map, const char *filename, char **repo_abbrev) { char buffer[1024]; @@ -11,9 +126,7 @@ static int read_single_mailmap(struct string_list *map, const char *filename, ch if (f == NULL) return 1; while (fgets(buffer, sizeof(buffer), f) != NULL) { - char *end_of_name, *left_bracket, *right_bracket; - char *name, *email; - int i; + char *name1 = 0, *email1 = 0, *name2 = 0, *email2 = 0; if (buffer[0] == '#') { static const char abbrev[] = "# repo-abbrev:"; int abblen = sizeof(abbrev) - 1; @@ -37,25 +150,11 @@ static int read_single_mailmap(struct string_list *map, const char *filename, ch } continue; } - if ((left_bracket = strchr(buffer, '<')) == NULL) - continue; - if ((right_bracket = strchr(left_bracket + 1, '>')) == NULL) - continue; - if (right_bracket == left_bracket + 1) - continue; - for (end_of_name = left_bracket; - end_of_name != buffer && isspace(end_of_name[-1]); - end_of_name--) - ; /* keep on looking */ - if (end_of_name == buffer) - continue; - name = xmalloc(end_of_name - buffer + 1); - strlcpy(name, buffer, end_of_name - buffer + 1); - email = xmalloc(right_bracket - left_bracket); - for (i = 0; i < right_bracket - left_bracket - 1; i++) - email[i] = tolower(left_bracket[i + 1]); - email[right_bracket - left_bracket - 1] = '\0'; - string_list_insert(email, map)->util = name; + if ((name2 = parse_name_and_email(buffer, &name1, &email1)) != NULL) + parse_name_and_email(name2, &name2, &email2); + + if (email1) + add_mapping(map, name1, email1, name2, email2); } fclose(f); return 0; @@ -63,22 +162,37 @@ static int read_single_mailmap(struct string_list *map, const char *filename, ch int read_mailmap(struct string_list *map, char **repo_abbrev) { + map->strdup_strings = 1; /* each failure returns 1, so >1 means both calls failed */ return read_single_mailmap(map, ".mailmap", repo_abbrev) + read_single_mailmap(map, git_mailmap_file, repo_abbrev) > 1; } -int map_email(struct string_list *map, const char *email, char *name, int maxlen) +void clear_mailmap(struct string_list *map) +{ + debug_mm("mailmap: clearing %d entries...\n", map->nr); + map->strdup_strings = 1; + string_list_clear_func(map, free_mailmap_entry); + debug_mm("mailmap: cleared\n"); +} + +int map_user(struct string_list *map, + char *email, int maxlen_email, char *name, int maxlen_name) { char *p; struct string_list_item *item; + struct mailmap_entry *me; char buf[1024], *mailbuf; int i; - /* autocomplete common developers */ + /* figure out space requirement for email */ p = strchr(email, '>'); - if (!p) - return 0; + if (!p) { + /* email passed in might not be wrapped in <>, but end with a \0 */ + p = memchr(email, '\0', maxlen_email); + if (p == 0) + return 0; + } if (p - email + 1 < sizeof(buf)) mailbuf = buf; else @@ -88,13 +202,39 @@ int map_email(struct string_list *map, const char *email, char *name, int maxlen for (i = 0; i < p - email; i++) mailbuf[i] = tolower(email[i]); mailbuf[i] = 0; + + debug_mm("map_user: map '%s' <%s>\n", name, mailbuf); item = string_list_lookup(mailbuf, map); + if (item != NULL) { + me = (struct mailmap_entry *)item->util; + if (me->namemap.nr) { + /* The item has multiple items, so we'll look up on name too */ + /* If the name is not found, we choose the simple entry */ + struct string_list_item *subitem = string_list_lookup(name, &me->namemap); + if (subitem) + item = subitem; + } + } if (mailbuf != buf) free(mailbuf); if (item != NULL) { - const char *realname = (const char *)item->util; - strlcpy(name, realname, maxlen); + struct mailmap_info *mi = (struct mailmap_info *)item->util; + if (mi->name == NULL && (mi->email == NULL || maxlen_email == 0)) { + debug_mm("map_user: -- (no simple mapping)\n"); + return 0; + } + if (maxlen_email && mi->email) + strlcpy(email, mi->email, maxlen_email); + if (maxlen_name && mi->name) + strlcpy(name, mi->name, maxlen_name); + debug_mm("map_user: to '%s' <%s>\n", name, mi->email ? mi->email : ""); return 1; } + debug_mm("map_user: --\n"); return 0; } + +int map_email(struct string_list *map, const char *email, char *name, int maxlen) +{ + return map_user(map, (char *)email, 0, name, maxlen); +} diff --git a/mailmap.h b/mailmap.h index ba2ee7670c..4b2ca3a7de 100644 --- a/mailmap.h +++ b/mailmap.h @@ -2,6 +2,10 @@ #define MAILMAP_H int read_mailmap(struct string_list *map, char **repo_abbrev); +void clear_mailmap(struct string_list *map); + int map_email(struct string_list *mailmap, const char *email, char *name, int maxlen); +int map_user(struct string_list *mailmap, + char *email, int maxlen_email, char *name, int maxlen_name); #endif From d20d654fe8923a502527547b17fe284d15d6aec9 Mon Sep 17 00:00:00 2001 From: Marius Storm-Olsen Date: Sun, 8 Feb 2009 15:34:30 +0100 Subject: [PATCH 030/149] Change current mailmap usage to do matching on both name and email of author/committer. Signed-off-by: Marius Storm-Olsen Signed-off-by: Junio C Hamano --- Documentation/pretty-formats.txt | 2 + builtin-blame.c | 50 +++++++++------ builtin-shortlog.c | 22 +++++-- pretty.c | 57 +++++++++-------- t/t4203-mailmap.sh | 106 +++++++++++++++++++++++++++++++ 5 files changed, 186 insertions(+), 51 deletions(-) diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 3d87d3edd5..28808b72e7 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -103,6 +103,7 @@ The placeholders are: - '%an': author name - '%aN': author name (respecting .mailmap) - '%ae': author email +- '%aE': author email (respecting .mailmap) - '%ad': author date (format respects --date= option) - '%aD': author date, RFC2822 style - '%ar': author date, relative @@ -111,6 +112,7 @@ The placeholders are: - '%cn': committer name - '%cN': committer name (respecting .mailmap) - '%ce': committer email +- '%cE': committer email (respecting .mailmap) - '%cd': committer date - '%cD': committer date, RFC2822 style - '%cr': committer date, relative diff --git a/builtin-blame.c b/builtin-blame.c index 19edcf33b1..f3be9fa9a5 100644 --- a/builtin-blame.c +++ b/builtin-blame.c @@ -1263,11 +1263,12 @@ struct commit_info * Parse author/committer line in the commit object buffer */ static void get_ac_line(const char *inbuf, const char *what, - int bufsz, char *person, const char **mail, + int person_len, char *person, + int mail_len, char *mail, unsigned long *time, const char **tz) { int len, tzlen, maillen; - char *tmp, *endp, *timepos; + char *tmp, *endp, *timepos, *mailpos; tmp = strstr(inbuf, what); if (!tmp) @@ -1278,10 +1279,11 @@ static void get_ac_line(const char *inbuf, const char *what, len = strlen(tmp); else len = endp - tmp; - if (bufsz <= len) { + if (person_len <= len) { error_out: /* Ugh */ - *mail = *tz = "(unknown)"; + *tz = "(unknown)"; + strcpy(mail, *tz); *time = 0; return; } @@ -1304,9 +1306,10 @@ static void get_ac_line(const char *inbuf, const char *what, *tmp = 0; while (*tmp != ' ') tmp--; - *mail = tmp + 1; + mailpos = tmp + 1; *tmp = 0; maillen = timepos - tmp; + memcpy(mail, mailpos, maillen); if (!mailmap.nr) return; @@ -1315,20 +1318,23 @@ static void get_ac_line(const char *inbuf, const char *what, * mailmap expansion may make the name longer. * make room by pushing stuff down. */ - tmp = person + bufsz - (tzlen + 1); + tmp = person + person_len - (tzlen + 1); memmove(tmp, *tz, tzlen); tmp[tzlen] = 0; *tz = tmp; - tmp = tmp - (maillen + 1); - memmove(tmp, *mail, maillen); - tmp[maillen] = 0; - *mail = tmp; - /* - * Now, convert e-mail using mailmap + * Now, convert both name and e-mail using mailmap */ - map_email(&mailmap, tmp + 1, person, tmp-person-1); + if(map_user(&mailmap, mail+1, mail_len-1, person, tmp-person-1)) { + /* Add a trailing '>' to email, since map_user returns plain emails + Note: It already has '<', since we replace from mail+1 */ + mailpos = memchr(mail, '\0', mail_len); + if (mailpos && mailpos-mail < mail_len - 1) { + *mailpos = '>'; + *(mailpos+1) = '\0'; + } + } } static void get_commit_info(struct commit *commit, @@ -1337,8 +1343,10 @@ static void get_commit_info(struct commit *commit, { int len; char *tmp, *endp, *reencoded, *message; - static char author_buf[1024]; - static char committer_buf[1024]; + static char author_name[1024]; + static char author_mail[1024]; + static char committer_name[1024]; + static char committer_mail[1024]; static char summary_buf[1024]; /* @@ -1356,9 +1364,11 @@ static void get_commit_info(struct commit *commit, } reencoded = reencode_commit_message(commit, NULL); message = reencoded ? reencoded : commit->buffer; - ret->author = author_buf; + ret->author = author_name; + ret->author_mail = author_mail; get_ac_line(message, "\nauthor ", - sizeof(author_buf), author_buf, &ret->author_mail, + sizeof(author_name), author_name, + sizeof(author_mail), author_mail, &ret->author_time, &ret->author_tz); if (!detailed) { @@ -1366,9 +1376,11 @@ static void get_commit_info(struct commit *commit, return; } - ret->committer = committer_buf; + ret->committer = committer_name; + ret->committer_mail = committer_mail; get_ac_line(message, "\ncommitter ", - sizeof(committer_buf), committer_buf, &ret->committer_mail, + sizeof(committer_name), committer_name, + sizeof(committer_mail), committer_mail, &ret->committer_time, &ret->committer_tz); ret->summary = summary_buf; diff --git a/builtin-shortlog.c b/builtin-shortlog.c index 314b6bc5c7..badd912038 100644 --- a/builtin-shortlog.c +++ b/builtin-shortlog.c @@ -40,6 +40,7 @@ static void insert_one_record(struct shortlog *log, char *buffer, *p; struct string_list_item *item; char namebuf[1024]; + char emailbuf[1024]; size_t len; const char *eol; const char *boemail, *eoemail; @@ -51,7 +52,19 @@ static void insert_one_record(struct shortlog *log, eoemail = strchr(boemail, '>'); if (!eoemail) return; - if (!map_email(&log->mailmap, boemail+1, namebuf, sizeof(namebuf))) { + + /* copy author name to namebuf, to support matching on both name and email */ + memcpy(namebuf, author, boemail - author); + len = boemail - author; + while(len > 0 && isspace(namebuf[len-1])) + len--; + namebuf[len] = 0; + + /* copy email name to emailbuf, to allow email replacement as well */ + memcpy(emailbuf, boemail+1, eoemail - boemail); + emailbuf[eoemail - boemail - 1] = 0; + + if (!map_user(&log->mailmap, emailbuf, sizeof(emailbuf), namebuf, sizeof(namebuf))) { while (author < boemail && isspace(*author)) author++; for (len = 0; @@ -67,8 +80,8 @@ static void insert_one_record(struct shortlog *log, if (log->email) { size_t room = sizeof(namebuf) - len - 1; - int maillen = eoemail - boemail + 1; - snprintf(namebuf + len, room, " %.*s", maillen, boemail); + int maillen = strlen(emailbuf); + snprintf(namebuf + len, room, " <%.*s>", maillen, emailbuf); } item = string_list_insert(namebuf, &log->list); @@ -321,6 +334,5 @@ void shortlog_output(struct shortlog *log) log->list.strdup_strings = 1; string_list_clear(&log->list, 1); - log->mailmap.strdup_strings = 1; - string_list_clear(&log->mailmap, 1); + clear_mailmap(&log->mailmap); } diff --git a/pretty.c b/pretty.c index 9e03d6ae2d..29f81c3f44 100644 --- a/pretty.c +++ b/pretty.c @@ -305,23 +305,14 @@ static char *logmsg_reencode(const struct commit *commit, return out; } -static int mailmap_name(struct strbuf *sb, const char *email) +static int mailmap_name(char *email, int email_len, char *name, int name_len) { static struct string_list *mail_map; - char buffer[1024]; - if (!mail_map) { mail_map = xcalloc(1, sizeof(*mail_map)); read_mailmap(mail_map, NULL); } - - if (!mail_map->nr) - return -1; - - if (!map_email(mail_map, email, buffer, sizeof(buffer))) - return -1; - strbuf_addstr(sb, buffer); - return 0; + return mail_map->nr && map_user(mail_map, email, email_len, name, name_len); } static size_t format_person_part(struct strbuf *sb, char part, @@ -332,6 +323,9 @@ static size_t format_person_part(struct strbuf *sb, char part, int start, end, tz = 0; unsigned long date = 0; char *ep; + const char *name_start, *name_end, *mail_start, *mail_end, *msg_end = msg+len; + char person_name[1024]; + char person_mail[1024]; /* advance 'end' to point to email start delimiter */ for (end = 0; end < len && msg[end] != '<'; end++) @@ -345,25 +339,34 @@ static size_t format_person_part(struct strbuf *sb, char part, if (end >= len - 2) goto skip; + /* Seek for both name and email part */ + name_start = msg; + name_end = msg+end; + while (name_end > name_start && isspace(*(name_end-1))) + name_end--; + mail_start = msg+end+1; + mail_end = mail_start; + while (mail_end < msg_end && *mail_end != '>') + mail_end++; + if (mail_end == msg_end) + goto skip; + end = mail_end-msg; + + if (part == 'N' || part == 'E') { /* mailmap lookup */ + strlcpy(person_name, name_start, name_end-name_start+1); + strlcpy(person_mail, mail_start, mail_end-mail_start+1); + mailmap_name(person_mail, sizeof(person_mail), person_name, sizeof(person_name)); + name_start = person_name; + name_end = name_start + strlen(person_name); + mail_start = person_mail; + mail_end = mail_start + strlen(person_mail); + } if (part == 'n' || part == 'N') { /* name */ - while (end > 0 && isspace(msg[end - 1])) - end--; - if (part != 'N' || !msg[end] || !msg[end + 1] || - mailmap_name(sb, msg + end + 2) < 0) - strbuf_add(sb, msg, end); + strbuf_add(sb, name_start, name_end-name_start); return placeholder_len; } - start = ++end; /* save email start position */ - - /* advance 'end' to point to email end delimiter */ - for ( ; end < len && msg[end] != '>'; end++) - ; /* do nothing */ - - if (end >= len) - goto skip; - - if (part == 'e') { /* email */ - strbuf_add(sb, msg + start, end - start); + if (part == 'e' || part == 'E') { /* email */ + strbuf_add(sb, mail_start, mail_end-mail_start); return placeholder_len; } diff --git a/t/t4203-mailmap.sh b/t/t4203-mailmap.sh index fc50ac22e3..9a7d1b4466 100755 --- a/t/t4203-mailmap.sh +++ b/t/t4203-mailmap.sh @@ -106,4 +106,110 @@ test_expect_success 'No mailmap files, but configured' ' test_cmp expect actual ' +# Extended mailmap configurations should give us the following output for shortlog +cat >expect <<\EOF +A U Thor (1): + initial + +CTO (1): + seventh + +Other Author (2): + third + fourth + +Santa Claus (2): + fifth + sixth + +Some Dude (1): + second + +EOF + +test_expect_success 'Shortlog output (complex mapping)' ' + echo three >>one && + git add one && + test_tick && + git commit --author "nick2 " -m third && + + echo four >>one && + git add one && + test_tick && + git commit --author "nick2 " -m fourth && + + echo five >>one && + git add one && + test_tick && + git commit --author "santa " -m fifth && + + echo six >>one && + git add one && + test_tick && + git commit --author "claus " -m sixth && + + echo seven >>one && + git add one && + test_tick && + git commit --author "CTO " -m seventh && + + mkdir internal_mailmap && + echo "Committed " > internal_mailmap/.mailmap && + echo " " >> internal_mailmap/.mailmap && + echo "Some Dude nick1 " >> internal_mailmap/.mailmap && + echo "Other Author nick2 " >> internal_mailmap/.mailmap && + echo "Other Author " >> internal_mailmap/.mailmap && + echo "Santa Claus " >> internal_mailmap/.mailmap && + echo "Santa Claus " >> internal_mailmap/.mailmap && + + git shortlog -e HEAD >actual && + test_cmp expect actual + +' + +# git log with --pretty format which uses the name and email mailmap placemarkers +cat >expect <<\EOF +Author CTO maps to CTO +Committer C O Mitter maps to Committed + +Author claus maps to Santa Claus +Committer C O Mitter maps to Committed + +Author santa maps to Santa Claus +Committer C O Mitter maps to Committed + +Author nick2 maps to Other Author +Committer C O Mitter maps to Committed + +Author nick2 maps to Other Author +Committer C O Mitter maps to Committed + +Author nick1 maps to Some Dude +Committer C O Mitter maps to Committed + +Author A U Thor maps to A U Thor +Committer C O Mitter maps to Committed +EOF + +test_expect_success 'Log output (complex mapping)' ' + git log --pretty=format:"Author %an <%ae> maps to %aN <%aE>%nCommitter %cn <%ce> maps to %cN <%cE>%n" >actual && + test_cmp expect actual +' + +# git blame +cat >expect <<\EOF +^3a2fdcb (A U Thor 2005-04-07 15:13:13 -0700 1) one +7de6f99b (Some Dude 2005-04-07 15:13:13 -0700 2) two +5815879d (Other Author 2005-04-07 15:14:13 -0700 3) three +ff859d96 (Other Author 2005-04-07 15:15:13 -0700 4) four +5ab6d4fa (Santa Claus 2005-04-07 15:16:13 -0700 5) five +38a42d8b (Santa Claus 2005-04-07 15:17:13 -0700 6) six +8ddc0386 (CTO 2005-04-07 15:18:13 -0700 7) seven +EOF + +test_expect_success 'Blame output (complex mapping)' ' + git blame one >actual && + test_cmp expect actual +' + test_done From 7d48e9e6f77d336376c1a554eeff0590f77e1ee1 Mon Sep 17 00:00:00 2001 From: Marius Storm-Olsen Date: Sun, 8 Feb 2009 15:34:31 +0100 Subject: [PATCH 031/149] Move mailmap documentation into separate file Include it directly from git-shortlog.txt, and refer to it from pretty-format.txt. Signed-off-by: Marius Storm-Olsen Signed-off-by: Junio C Hamano --- Documentation/git-blame.txt | 6 +++ Documentation/git-shortlog.txt | 83 +++----------------------------- Documentation/mailmap.txt | 75 +++++++++++++++++++++++++++++ Documentation/pretty-formats.txt | 8 +-- 4 files changed, 91 insertions(+), 81 deletions(-) create mode 100644 Documentation/mailmap.txt diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index fba374d652..6999cf2a65 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -184,6 +184,12 @@ there is ever added information (like the commit encoding or extended commit commentary), a blame viewer won't ever care. +MAPPING AUTHORS +--------------- + +include::mailmap.txt[] + + SEE ALSO -------- linkgit:git-annotate[1] diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index a0eaab5250..42463a955d 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -45,86 +45,15 @@ OPTIONS and subsequent lines are indented by `indent2` spaces. `width`, `indent1`, and `indent2` default to 76, 6 and 9 respectively. -FILES ------ -If the file `.mailmap` exists at the toplevel of the repository, or at -the location pointed to by the mailmap.file configuration option, it -is used to map author and committer names and email addresses to -canonical real names and email addresses. -This mapping can be used to coalesce together commits by the same -person where their name and/or email address was spelled differently. +MAPPING AUTHORS +--------------- -In the simple form, each line in the file consists of the canonical -real name of an author, whitespace, and an email address used in the -commit (enclosed by '<' and '>') to map to the name. Thus, looks like -this --- - Proper Name --- +The `.mailmap` feature is used to coalesce together commits by the same +person in the shortlog, where their name and/or email address was +spelled differently. -The more complex forms are --- - --- -which allows mailmap to replace only the email part of a commit, and --- - Proper Name --- -which allows mailmap to replace both the name and the email of a -commit matching the specified commit email address, and --- - Proper Name Commit Name --- -which allows mailmap to replace both the name and the email of a -commit matching both the specified commit name and email address. - -Example 1: Your history contains commits by two authors, Jane -and Joe, whose names appear in the repository under several forms: - ------------- -Joe Developer -Joe R. Developer -Jane Doe -Jane Doe -Jane D. ------------- - -Now suppose that Joe wants his middle name initial used, and Jane -prefers her family name fully spelled out. A proper `.mailmap` file -would look like: - ------------- -Jane Doe -Joe R. Developer ------------- - -Note how we don't need an entry for , because the -real name of that author is correct already, and coalesced directly. - -Example 2: Your repository contains commits from the following -authors: - ------------- -nick1 -nick2 -nick2 -santa -claus -CTO ------------- - -Then, you might want a `.mailmap` file looking like: ------------- - -Some Dude nick1 -Other Author nick2 -Other Author -Santa Claus ------------- - -Use hash '#' for comments that are either on their own line, or after -the email address. +include::mailmap.txt[] Author diff --git a/Documentation/mailmap.txt b/Documentation/mailmap.txt new file mode 100644 index 0000000000..e25b154838 --- /dev/null +++ b/Documentation/mailmap.txt @@ -0,0 +1,75 @@ +If the file `.mailmap` exists at the toplevel of the repository, or at +the location pointed to by the mailmap.file configuration option, it +is used to map author and committer names and email addresses to +canonical real names and email addresses. + +In the simple form, each line in the file consists of the canonical +real name of an author, whitespace, and an email address used in the +commit (enclosed by '<' and '>') to map to the name. Thus, looks like +this +-- + Proper Name +-- + +The more complex forms are +-- + +-- +which allows mailmap to replace only the email part of a commit, and +-- + Proper Name +-- +which allows mailmap to replace both the name and the email of a +commit matching the specified commit email address, and +-- + Proper Name Commit Name +-- +which allows mailmap to replace both the name and the email of a +commit matching both the specified commit name and email address. + +Example 1: Your history contains commits by two authors, Jane +and Joe, whose names appear in the repository under several forms: + +------------ +Joe Developer +Joe R. Developer +Jane Doe +Jane Doe +Jane D. +------------ + +Now suppose that Joe wants his middle name initial used, and Jane +prefers her family name fully spelled out. A proper `.mailmap` file +would look like: + +------------ +Jane Doe +Joe R. Developer +------------ + +Note how we don't need an entry for , because the +real name of that author is correct already. + +Example 2: Your repository contains commits from the following +authors: + +------------ +nick1 +nick2 +nick2 +santa +claus +CTO +------------ + +Then, you might want a `.mailmap` file looking like: +------------ + +Some Dude nick1 +Other Author nick2 +Other Author +Santa Claus +------------ + +Use hash '#' for comments that are either on their own line, or after +the email address. \ No newline at end of file diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 28808b72e7..159390c35a 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -101,18 +101,18 @@ The placeholders are: - '%P': parent hashes - '%p': abbreviated parent hashes - '%an': author name -- '%aN': author name (respecting .mailmap) +- '%aN': author name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%ae': author email -- '%aE': author email (respecting .mailmap) +- '%aE': author email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%ad': author date (format respects --date= option) - '%aD': author date, RFC2822 style - '%ar': author date, relative - '%at': author date, UNIX timestamp - '%ai': author date, ISO 8601 format - '%cn': committer name -- '%cN': committer name (respecting .mailmap) +- '%cN': committer name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%ce': committer email -- '%cE': committer email (respecting .mailmap) +- '%cE': committer email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%cd': committer date - '%cD': committer date, RFC2822 style - '%cr': committer date, relative From 6e46cc0d9294d5f4ad0c9a6ffd2d9ca82bce8458 Mon Sep 17 00:00:00 2001 From: Christian Couder Date: Sun, 8 Feb 2009 15:54:47 +0100 Subject: [PATCH 032/149] rev-list: fix showing distance when using --bisect-all Before d467a52 ("Make '--decorate' set an explicit 'show_decorations' flag", Nov 3 2008), commit decorations were shown whenever they exist, and distances stored in them by "git rev-list --bisect-all" were automatically shown. d467a52 changed the rule so that commit decorations are not shown unless rev_info explicitly asks to, with its show_decorations bit, but forgot that the ones "git rev-list --bisect-all" adds need to be shown. This patch fixes this old breakage. Signed-off-by: Christian Couder Signed-off-by: Junio C Hamano --- builtin-rev-list.c | 1 + 1 file changed, 1 insertion(+) diff --git a/builtin-rev-list.c b/builtin-rev-list.c index 857742a14f..436afa45f5 100644 --- a/builtin-rev-list.c +++ b/builtin-rev-list.c @@ -608,6 +608,7 @@ int cmd_rev_list(int argc, const char **argv, const char *prefix) if (!strcmp(arg, "--bisect-all")) { bisect_list = 1; bisect_find_all = 1; + revs.show_decorations = 1; continue; } if (!strcmp(arg, "--bisect-vars")) { From 9aad6cbaef3c459ff4953f5a22bbbc7abfc72800 Mon Sep 17 00:00:00 2001 From: Stephan Beyer Date: Sun, 8 Feb 2009 18:40:39 +0100 Subject: [PATCH 033/149] add -p: get rid of Git.pm warnings about unitialized values After invoking git add -p I always got the warnings: Use of uninitialized value $_[3] in exec at Git.pm line 1282. Use of uninitialized value $args[2] in join or string at Git.pm line 1264. A bisect showed that these warnings occur in a301973 "add -p: print errors in separate color" the first time. They can be reproduced by setting color.ui (or color.interactive) to "auto" and unsetting color.interactive.help and color.interactive.error. I am using Perl 5.10.0. The reason of the warning is that color.interactive.error defaults to color.interactive.help which defaults to nothing in the specific codepath. It defaults to 'red bold' some lines above which could lead to the wrong assumption that it always defaults to 'red bold' now. This patch lets it default to 'red bold', blowing the warnings away. Signed-off-by: Stephan Beyer Acked-By: Thomas Rast Signed-off-by: Junio C Hamano --- git-add--interactive.perl | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/git-add--interactive.perl b/git-add--interactive.perl index ec47888f57..5f129a4203 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -14,7 +14,8 @@ my ($prompt_color, $header_color, $help_color) = ) : (); my $error_color = (); if ($menu_use_color) { - my $help_color_spec = $repo->config('color.interactive.help'); + my $help_color_spec = ($repo->config('color.interactive.help') or + 'red bold'); $error_color = $repo->get_color('color.interactive.error', $help_color_spec); } From 3021faf6562690658d0b9f9fdd7cbe8c9dd61628 Mon Sep 17 00:00:00 2001 From: Sitaram Chamarty Date: Fri, 6 Feb 2009 10:10:53 +0530 Subject: [PATCH 034/149] Documentation: clarify commits affected by gitk --merge Signed-off-by: Sitaram Chamarty Signed-off-by: Junio C Hamano --- Documentation/gitk.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index 4673a75a98..bd005bc5c8 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -47,7 +47,8 @@ frequently used options. After an attempt to merge stops with conflicts, show the commits on the history between two branches (i.e. the HEAD and the MERGE_HEAD) - that modify the conflicted files. + that modify the conflicted files and do not exist on all the heads + being merged. --argscmd=:: Command to be run each time gitk has to determine the list of From 3ec7371f63046aa6d8e13ddeb1eaa9cccfbf2aa2 Mon Sep 17 00:00:00 2001 From: Johannes Schindelin Date: Sun, 8 Feb 2009 21:40:42 -0800 Subject: [PATCH 035/149] Add two extra tests for git rebase --- t/t3400-rebase.sh | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index b7a670ef40..8c0c5f5982 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -14,7 +14,8 @@ export GIT_AUTHOR_EMAIL test_expect_success \ 'prepare repository with topic branches' \ - 'echo First > A && + 'git config core.logAllRefUpdates true && + echo First > A && git update-index --add A && git commit -m "Add A." && git checkout -b my-topic-branch && @@ -84,4 +85,14 @@ test_expect_success 'rebase a single mode change' ' GIT_TRACE=1 git rebase master ' +test_expect_success 'HEAD was detached during rebase' ' + test $(git rev-parse HEAD@{1}) != $(git rev-parse modechange@{1}) +' + +test_expect_success 'Show verbose error when HEAD could not be detached' ' + : > B && + test_must_fail git rebase topic 2> output.err > output.out && + grep "Untracked working tree file .B. would be overwritten" output.err +' + test_done From ffe4da1573835806f1c931fc204264f76618aae2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Santi=20B=C3=A9jar?= Date: Sat, 7 Feb 2009 23:21:49 +0100 Subject: [PATCH 036/149] doc/bundle: Use the more conventional suffix '.bundle' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Although it does not matter in general it is handled different by "git clone", as it removes it to make the "humanish" name of the new repository. Signed-off-by: Santi Béjar Signed-off-by: Junio C Hamano --- Documentation/git-bundle.txt | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index ea0f6a0f3a..57590b1480 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -107,17 +107,17 @@ incremental bundle, ---------------- machineA$ cd R1 -machineA$ git bundle create file.bdl master +machineA$ git bundle create file.bundle master machineA$ git tag -f lastR2bundle master ---------------- -Then you sneakernet file.bdl to the target machine B. Because you don't +Then you sneakernet file.bundle to the target machine B. Because you don't have to have any object to extract objects from such a bundle, not only you can fetch/pull from a bundle, you can clone from it as if it was a remote repository. ---------------- -machineB$ git clone /home/me/tmp/file.bdl R2 +machineB$ git clone /home/me/tmp/file.bundle R2 ---------------- This will define a remote called "origin" in the resulting repository that @@ -126,12 +126,12 @@ have an entry like this: ------------------------ [remote "origin"] - url = /home/me/tmp/file.bdl + url = /home/me/tmp/file.bundle fetch = refs/heads/*:refs/remotes/origin/* ------------------------ You can fetch/pull to update the resulting mine.git repository after -replacing the bundle you store at /home/me/tmp/file.bdl with incremental +replacing the bundle you store at /home/me/tmp/file.bundle with incremental updates from here on. After working more in the original repository, you can create an @@ -139,11 +139,11 @@ incremental bundle to update the other: ---------------- machineA$ cd R1 -machineA$ git bundle create file.bdl lastR2bundle..master +machineA$ git bundle create file.bundle lastR2bundle..master machineA$ git tag -f lastR2bundle master ---------------- -and sneakernet it to the other machine to replace /home/me/tmp/file.bdl, +and sneakernet it to the other machine to replace /home/me/tmp/file.bundle, and pull from it. ---------------- From 7e1100e9e939c9178b2aa3969349e9e8d34488bf Mon Sep 17 00:00:00 2001 From: Matt McCutchen Date: Sat, 7 Feb 2009 19:00:09 -0500 Subject: [PATCH 037/149] gitweb: add $prevent_xss option to prevent XSS by repository content Add a gitweb configuration variable $prevent_xss that disables features to prevent content in repositories from launching cross-site scripting (XSS) attacks in the gitweb domain. Currently, this option makes gitweb ignore README.html (a better solution may be worked out in the future) and serve a blob_plain file of an untrusted type with "Content-Disposition: attachment", which tells the browser not to show the file at its original URL. The XSS prevention is currently off by default. Signed-off-by: Matt McCutchen Signed-off-by: Junio C Hamano --- gitweb/README | 9 ++++++++- gitweb/gitweb.perl | 21 +++++++++++++++++++-- 2 files changed, 27 insertions(+), 3 deletions(-) diff --git a/gitweb/README b/gitweb/README index 825162a0b6..19ae28ef9b 100644 --- a/gitweb/README +++ b/gitweb/README @@ -214,6 +214,11 @@ not include variables usually directly set during build): Rename detection options for git-diff and git-diff-tree. By default ('-M'); set it to ('-C') or ('-C', '-C') to also detect copies, or set it to () if you don't want to have renames detection. + * $prevent_xss + If true, some gitweb features are disabled to prevent content in + repositories from launching cross-site scripting (XSS) attacks. Set this + to true if you don't trust the content of your repositories. The default + is false. Projects list file format @@ -260,7 +265,9 @@ You can use the following files in repository: A .html file (HTML fragment) which is included on the gitweb project summary page inside
block element. You can use it for longer description of a project, to provide links (for example to project's - homepage), etc. + homepage), etc. This is recognized only if XSS prevention is off + ($prevent_xss is false); a way to include a readme safely when XSS + prevention is on may be worked out in the future. * description (or gitweb.description) Short (shortened by default to 25 characters in the projects list page) single line description of a project (of a repository). Plain text file; diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 99f71b47c2..bdaa4e9463 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -132,6 +132,10 @@ our $fallback_encoding = 'latin1'; # - one might want to include '-B' option, e.g. '-B', '-M' our @diff_opts = ('-M'); # taken from git_commit +# Disables features that would allow repository owners to inject script into +# the gitweb domain. +our $prevent_xss = 0; + # information about snapshot formats that gitweb is capable of serving our %known_snapshot_formats = ( # name => { @@ -4494,7 +4498,9 @@ sub git_summary { print "\n"; - if (-s "$projectroot/$project/README.html") { + # If XSS prevention is on, we don't include README.html. + # TODO: Allow a readme in some safe format. + if (!$prevent_xss && -s "$projectroot/$project/README.html") { print "
readme
\n" . "
\n"; insert_file("$projectroot/$project/README.html"); @@ -4739,10 +4745,21 @@ sub git_blob_plain { $save_as .= '.txt'; } + # With XSS prevention on, blobs of all types except a few known safe + # ones are served with "Content-Disposition: attachment" to make sure + # they don't run in our security domain. For certain image types, + # blob view writes an tag referring to blob_plain view, and we + # want to be sure not to break that by serving the image as an + # attachment (though Firefox 3 doesn't seem to care). + my $sandbox = $prevent_xss && + $type !~ m!^(?:text/plain|image/(?:gif|png|jpeg))$!; + print $cgi->header( -type => $type, -expires => $expires, - -content_disposition => 'inline; filename="' . $save_as . '"'); + -content_disposition => + ($sandbox ? 'attachment' : 'inline') + . '; filename="' . $save_as . '"'); undef $/; binmode STDOUT, ':raw'; print <$fd>; From cf9957875c3a27b6ae4593e1fa9d4dabbde68433 Mon Sep 17 00:00:00 2001 From: Ted Pavlic Date: Fri, 6 Feb 2009 11:05:37 -0500 Subject: [PATCH 038/149] completion: Fix GIT_PS1_SHOWDIRTYSTATE to prevent unbound variable errors. Signed-off-by: Ted Pavlic Acked-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- contrib/completion/git-completion.bash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 307bf5d4f9..6e04985079 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -125,7 +125,7 @@ __git_ps1 () local w local i - if test -n "$GIT_PS1_SHOWDIRTYSTATE"; then + if test -n "${GIT_PS1_SHOWDIRTYSTATE-}"; then if test "$(git config --bool bash.showDirtyState)" != "false"; then git diff --no-ext-diff --ignore-submodules \ --quiet --exit-code || w="*" From a9ee90d7ff9f3854b3096b4abbdc2013708704f5 Mon Sep 17 00:00:00 2001 From: Ted Pavlic Date: Fri, 6 Feb 2009 11:05:38 -0500 Subject: [PATCH 039/149] completion: Get rid of tabbed indentation in comments. Replace with spaces. Signed-off-by: Ted Pavlic Acked-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- contrib/completion/git-completion.bash | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 6e04985079..f44f63cfeb 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -34,11 +34,11 @@ # are currently in a git repository. The %s token will be # the name of the current branch. # -# In addition, if you set GIT_PS1_SHOWDIRTYSTATE to a nonempty -# value, unstaged (*) and staged (+) changes will be shown next -# to the branch name. You can configure this per-repository -# with the bash.showDirtyState variable, which defaults to true -# once GIT_PS1_SHOWDIRTYSTATE is enabled. +# In addition, if you set GIT_PS1_SHOWDIRTYSTATE to a nonempty +# value, unstaged (*) and staged (+) changes will be shown next +# to the branch name. You can configure this per-repository +# with the bash.showDirtyState variable, which defaults to true +# once GIT_PS1_SHOWDIRTYSTATE is enabled. # # To submit patches: # From f6b98e46bdf64454d7c6ab76d617237118799d7b Mon Sep 17 00:00:00 2001 From: Todd Zullinger Date: Sun, 8 Feb 2009 18:12:43 -0500 Subject: [PATCH 040/149] git-web--browse: Fix check for /bin/start The previous check in git-web--browse for /bin/start used test -n /bin/start, which was always true. This lead to "start" being tried first in the browser list. On systems with upstart installed, "start" exists and might be in the PATH, but it makes a poor choice for a web browser. Instead, test that /bin/start exists and is executable. Signed-off-by: Todd Zullinger Signed-off-by: Junio C Hamano --- git-web--browse.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/git-web--browse.sh b/git-web--browse.sh index 78d236b77f..7ed0faddcd 100755 --- a/git-web--browse.sh +++ b/git-web--browse.sh @@ -115,7 +115,7 @@ if test -z "$browser" ; then browser_candidates="open $browser_candidates" fi # /bin/start indicates MinGW - if test -n /bin/start; then + if test -x /bin/start; then browser_candidates="start $browser_candidates" fi From 563478c3f83be93ab369368c5a418d7f75941594 Mon Sep 17 00:00:00 2001 From: Johannes Sixt Date: Mon, 9 Feb 2009 10:24:51 +0100 Subject: [PATCH 041/149] t2200: Avoid glob pattern that also matches files On Windows, there is an unfortunate interaction between the MSYS bash and git's command line processing: - Since Windows's CMD does not do the wildcard expansion, but passes arguments like path? through to the programs, the programs must do the expansion themselves. This happens in the startup code before main() is entered. - bash, however, passes the argument "path?" to git, assuming that git will see the unquoted word unchanged as a single argument. But actually git expands the unquoted word before main() is entered. Since at the time when the git ls-files is invoked not all names that the test case is interested in exist as files, only a subset was listed, so that the test failed. We now list all interesting paths explicitly. Signed-off-by: Johannes Sixt --- t/t2200-add-update.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/t/t2200-add-update.sh b/t/t2200-add-update.sh index b2ddf5ace3..652801ebca 100755 --- a/t/t2200-add-update.sh +++ b/t/t2200-add-update.sh @@ -150,7 +150,7 @@ test_expect_success 'add -u resolves unmerged paths' ' echo 2 >path3 && echo 2 >path5 && git add -u && - git ls-files -s "path?" >actual && + git ls-files -s path1 path3 path4 path5 path6 >actual && { echo "100644 $three 0 path1" echo "100644 $one 1 path3" From 3d20c636af05c44a6ff4df9309c2bca108ee149b Mon Sep 17 00:00:00 2001 From: "Shawn O. Pearce" Date: Tue, 10 Feb 2009 13:36:12 -0800 Subject: [PATCH 042/149] Clear the delta base cache during fast-import checkpoint Otherwise we may reuse the same memory address for a totally different "struct packed_git", and a previously cached object from the prior occupant might be returned when trying to unpack an object from the new pack. Found-by: Daniel Barkalow Signed-off-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- cache.h | 1 + fast-import.c | 1 + sha1_file.c | 7 +++++++ 3 files changed, 9 insertions(+) diff --git a/cache.h b/cache.h index 42f2f2754b..099a32e5fc 100644 --- a/cache.h +++ b/cache.h @@ -739,6 +739,7 @@ extern unsigned char* use_pack(struct packed_git *, struct pack_window **, off_t extern void close_pack_windows(struct packed_git *); extern void unuse_pack(struct pack_window **); extern void free_pack_by_name(const char *); +extern void clear_delta_base_cache(void); extern struct packed_git *add_packed_git(const char *, int, int); extern const unsigned char *nth_packed_object_sha1(struct packed_git *, uint32_t); extern off_t nth_packed_object_offset(const struct packed_git *, uint32_t); diff --git a/fast-import.c b/fast-import.c index 6d5ee6f463..5bc9ce2cc9 100644 --- a/fast-import.c +++ b/fast-import.c @@ -943,6 +943,7 @@ static void end_packfile(void) { struct packed_git *old_p = pack_data, *new_p; + clear_delta_base_cache(); if (object_count) { char *idx_name; int i; diff --git a/sha1_file.c b/sha1_file.c index 0cfea9edc1..cbcae24d28 100644 --- a/sha1_file.c +++ b/sha1_file.c @@ -1630,6 +1630,13 @@ static inline void release_delta_base_cache(struct delta_base_cache_entry *ent) } } +void clear_delta_base_cache(void) +{ + unsigned long p; + for (p = 0; p < MAX_DELTA_CACHE; p++) + release_delta_base_cache(&delta_base_cache[p]); +} + static void add_delta_base_cache(struct packed_git *p, off_t base_offset, void *base, unsigned long base_size, enum object_type type) { From 954cfb5cfd17d57b9b31b19b73efe73199407e07 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Tue, 10 Feb 2009 21:31:33 -0800 Subject: [PATCH 043/149] Revert "Merge branch 'js/notes'" This reverts commit 7b75b331f6744fbf953fe8913703378ef86a2189, reversing changes made to 5d680a67d7909c89af96eba4a2d77abed606292b. --- .gitignore | 1 - Documentation/RelNotes-1.6.2.txt | 2 - Documentation/config.txt | 13 --- Documentation/git-notes.txt | 46 --------- Makefile | 3 - cache.h | 3 - command-list.txt | 1 - commit.c | 1 - config.c | 5 - environment.c | 1 - git-notes.sh | 65 ------------- notes.c | 160 ------------------------------- notes.h | 7 -- pretty.c | 5 - t/t3301-notes.sh | 95 ------------------ t/t3302-notes-index-expensive.sh | 98 ------------------- 16 files changed, 506 deletions(-) delete mode 100644 Documentation/git-notes.txt delete mode 100755 git-notes.sh delete mode 100644 notes.c delete mode 100644 notes.h delete mode 100755 t/t3301-notes.sh delete mode 100755 t/t3302-notes-index-expensive.sh diff --git a/.gitignore b/.gitignore index 13311f1d5e..1c57d4c958 100644 --- a/.gitignore +++ b/.gitignore @@ -82,7 +82,6 @@ git-mktag git-mktree git-name-rev git-mv -git-notes git-pack-redundant git-pack-objects git-pack-refs diff --git a/Documentation/RelNotes-1.6.2.txt b/Documentation/RelNotes-1.6.2.txt index f1bfa82749..b86b684d23 100644 --- a/Documentation/RelNotes-1.6.2.txt +++ b/Documentation/RelNotes-1.6.2.txt @@ -37,8 +37,6 @@ Updates since v1.6.1 * automatic typo correction works on aliases as well -* Initial support for "git notes" implemented. - * @{-1} is a way to refer to the last branch you were on. This is accepted not only where an object name is expected, but anywhere a branch name is expected. E.g. "git branch --track mybranch @{-1}" diff --git a/Documentation/config.txt b/Documentation/config.txt index 1dd18c928d..1806a60610 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -422,19 +422,6 @@ relatively high IO latencies. With this set to 'true', git will do the index comparison to the filesystem data in parallel, allowing overlapping IO's. -core.notesRef:: - When showing commit messages, also show notes which are stored in - the given ref. This ref is expected to contain files named - after the full SHA-1 of the commit they annotate. -+ -If such a file exists in the given ref, the referenced blob is read, and -appended to the commit message, separated by a "Notes:" line. If the -given ref itself does not exist, it is not an error, but means that no -notes should be printed. -+ -This setting defaults to "refs/notes/commits", and can be overridden by -the `GIT_NOTES_REF` environment variable. - alias.*:: Command aliases for the linkgit:git[1] command wrapper - e.g. after defining "alias.last = cat-file commit HEAD", the invocation diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt deleted file mode 100644 index 3d93625f9a..0000000000 --- a/Documentation/git-notes.txt +++ /dev/null @@ -1,46 +0,0 @@ -git-notes(1) -============ - -NAME ----- -git-notes - Add/inspect commit notes - -SYNOPSIS --------- -[verse] -'git-notes' (edit | show) [commit] - -DESCRIPTION ------------ -This command allows you to add notes to commit messages, without -changing the commit. To discern these notes from the message stored -in the commit object, the notes are indented like the message, after -an unindented line saying "Notes:". - -To disable commit notes, you have to set the config variable -core.notesRef to the empty string. Alternatively, you can set it -to a different ref, something like "refs/notes/bugzilla". This setting -can be overridden by the environment variable "GIT_NOTES_REF". - - -SUBCOMMANDS ------------ - -edit:: - Edit the notes for a given commit (defaults to HEAD). - -show:: - Show the notes for a given commit (defaults to HEAD). - - -Author ------- -Written by Johannes Schindelin - -Documentation -------------- -Documentation by Johannes Schindelin - -GIT ---- -Part of the gitlink:git[7] suite diff --git a/Makefile b/Makefile index 27b9569746..627d4d09ba 100644 --- a/Makefile +++ b/Makefile @@ -265,7 +265,6 @@ SCRIPT_SH += git-merge-octopus.sh SCRIPT_SH += git-merge-one-file.sh SCRIPT_SH += git-merge-resolve.sh SCRIPT_SH += git-mergetool.sh -SCRIPT_SH += git-notes.sh SCRIPT_SH += git-parse-remote.sh SCRIPT_SH += git-pull.sh SCRIPT_SH += git-quiltimport.sh @@ -378,7 +377,6 @@ LIB_H += ll-merge.h LIB_H += log-tree.h LIB_H += mailmap.h LIB_H += merge-recursive.h -LIB_H += notes.h LIB_H += object.h LIB_H += pack.h LIB_H += pack-refs.h @@ -461,7 +459,6 @@ LIB_OBJS += match-trees.o LIB_OBJS += merge-file.o LIB_OBJS += merge-recursive.o LIB_OBJS += name-hash.o -LIB_OBJS += notes.o LIB_OBJS += object.o LIB_OBJS += pack-check.o LIB_OBJS += pack-refs.o diff --git a/cache.h b/cache.h index 7f1a6e8bd0..a7f435ddef 100644 --- a/cache.h +++ b/cache.h @@ -371,8 +371,6 @@ static inline enum object_type object_type(unsigned int mode) #define GITATTRIBUTES_FILE ".gitattributes" #define INFOATTRIBUTES_FILE "info/attributes" #define ATTRIBUTE_MACRO_PREFIX "[attr]" -#define GIT_NOTES_REF_ENVIRONMENT "GIT_NOTES_REF" -#define GIT_NOTES_DEFAULT_REF "refs/notes/commits" extern int is_bare_repository_cfg; extern int is_bare_repository(void); @@ -544,7 +542,6 @@ enum rebase_setup_type { extern enum branch_track git_branch_track; extern enum rebase_setup_type autorebase; -extern char *notes_ref_name; #define GIT_REPO_VERSION 0 extern int repository_format_version; diff --git a/command-list.txt b/command-list.txt index 2dc2c3320c..3583a33ee9 100644 --- a/command-list.txt +++ b/command-list.txt @@ -73,7 +73,6 @@ git-mktag plumbingmanipulators git-mktree plumbingmanipulators git-mv mainporcelain common git-name-rev plumbinginterrogators -git-notes mainporcelain git-pack-objects plumbingmanipulators git-pack-redundant plumbinginterrogators git-pack-refs ancillarymanipulators diff --git a/commit.c b/commit.c index cf72143f58..aa3b35b6a8 100644 --- a/commit.c +++ b/commit.c @@ -5,7 +5,6 @@ #include "utf8.h" #include "diff.h" #include "revision.h" -#include "notes.h" int save_commit_buffer = 1; diff --git a/config.c b/config.c index e5d5b4bd06..790405a213 100644 --- a/config.c +++ b/config.c @@ -469,11 +469,6 @@ static int git_default_core_config(const char *var, const char *value) return 0; } - if (!strcmp(var, "core.notesref")) { - notes_ref_name = xstrdup(value); - return 0; - } - if (!strcmp(var, "core.pager")) return git_config_string(&pager_program, var, value); diff --git a/environment.c b/environment.c index 0edae21e74..e278bce0ea 100644 --- a/environment.c +++ b/environment.c @@ -45,7 +45,6 @@ enum rebase_setup_type autorebase = AUTOREBASE_NEVER; /* Parallel index stat data preload? */ int core_preload_index = 0; -char *notes_ref_name; /* This is set by setup_git_dir_gently() and/or git_default_config() */ char *git_work_tree_cfg; diff --git a/git-notes.sh b/git-notes.sh deleted file mode 100755 index bfdbaa8527..0000000000 --- a/git-notes.sh +++ /dev/null @@ -1,65 +0,0 @@ -#!/bin/sh - -USAGE="(edit | show) [commit]" -. git-sh-setup - -test -n "$3" && usage - -test -z "$1" && usage -ACTION="$1"; shift - -test -z "$GIT_NOTES_REF" && GIT_NOTES_REF="$(git config core.notesref)" -test -z "$GIT_NOTES_REF" && GIT_NOTES_REF="refs/notes/commits" - -COMMIT=$(git rev-parse --verify --default HEAD "$@") || -die "Invalid commit: $@" - -MESSAGE="$GIT_DIR"/new-notes-$COMMIT -trap ' - test -f "$MESSAGE" && rm "$MESSAGE" -' 0 - -case "$ACTION" in -edit) - GIT_NOTES_REF= git log -1 $COMMIT | sed "s/^/#/" > "$MESSAGE" - - GIT_INDEX_FILE="$MESSAGE".idx - export GIT_INDEX_FILE - - CURRENT_HEAD=$(git show-ref "$GIT_NOTES_REF" | cut -f 1 -d ' ') - if [ -z "$CURRENT_HEAD" ]; then - PARENT= - else - PARENT="-p $CURRENT_HEAD" - git read-tree "$GIT_NOTES_REF" || die "Could not read index" - git cat-file blob :$COMMIT >> "$MESSAGE" 2> /dev/null - fi - - ${VISUAL:-${EDITOR:-vi}} "$MESSAGE" - - grep -v ^# < "$MESSAGE" | git stripspace > "$MESSAGE".processed - mv "$MESSAGE".processed "$MESSAGE" - if [ -s "$MESSAGE" ]; then - BLOB=$(git hash-object -w "$MESSAGE") || - die "Could not write into object database" - git update-index --add --cacheinfo 0644 $BLOB $COMMIT || - die "Could not write index" - else - test -z "$CURRENT_HEAD" && - die "Will not initialise with empty tree" - git update-index --force-remove $COMMIT || - die "Could not update index" - fi - - TREE=$(git write-tree) || die "Could not write tree" - NEW_HEAD=$(echo Annotate $COMMIT | git commit-tree $TREE $PARENT) || - die "Could not annotate" - git update-ref -m "Annotate $COMMIT" \ - "$GIT_NOTES_REF" $NEW_HEAD $CURRENT_HEAD -;; -show) - git show "$GIT_NOTES_REF":$COMMIT -;; -*) - usage -esac diff --git a/notes.c b/notes.c deleted file mode 100644 index bd737842d9..0000000000 --- a/notes.c +++ /dev/null @@ -1,160 +0,0 @@ -#include "cache.h" -#include "commit.h" -#include "notes.h" -#include "refs.h" -#include "utf8.h" -#include "strbuf.h" -#include "tree-walk.h" - -struct entry { - unsigned char commit_sha1[20]; - unsigned char notes_sha1[20]; -}; - -struct hash_map { - struct entry *entries; - off_t count, size; -}; - -static int initialized; -static struct hash_map hash_map; - -static int hash_index(struct hash_map *map, const unsigned char *sha1) -{ - int i = ((*(unsigned int *)sha1) % map->size); - - for (;;) { - unsigned char *current = map->entries[i].commit_sha1; - - if (!hashcmp(sha1, current)) - return i; - - if (is_null_sha1(current)) - return -1 - i; - - if (++i == map->size) - i = 0; - } -} - -static void add_entry(const unsigned char *commit_sha1, - const unsigned char *notes_sha1) -{ - int index; - - if (hash_map.count + 1 > hash_map.size >> 1) { - int i, old_size = hash_map.size; - struct entry *old = hash_map.entries; - - hash_map.size = old_size ? old_size << 1 : 64; - hash_map.entries = (struct entry *) - xcalloc(sizeof(struct entry), hash_map.size); - - for (i = 0; i < old_size; i++) - if (!is_null_sha1(old[i].commit_sha1)) { - index = -1 - hash_index(&hash_map, - old[i].commit_sha1); - memcpy(hash_map.entries + index, old + i, - sizeof(struct entry)); - } - free(old); - } - - index = hash_index(&hash_map, commit_sha1); - if (index < 0) { - index = -1 - index; - hash_map.count++; - } - - hashcpy(hash_map.entries[index].commit_sha1, commit_sha1); - hashcpy(hash_map.entries[index].notes_sha1, notes_sha1); -} - -static void initialize_hash_map(const char *notes_ref_name) -{ - unsigned char sha1[20], commit_sha1[20]; - unsigned mode; - struct tree_desc desc; - struct name_entry entry; - void *buf; - - if (!notes_ref_name || read_ref(notes_ref_name, commit_sha1) || - get_tree_entry(commit_sha1, "", sha1, &mode)) - return; - - buf = fill_tree_descriptor(&desc, sha1); - if (!buf) - die("Could not read %s for notes-index", sha1_to_hex(sha1)); - - while (tree_entry(&desc, &entry)) - if (!get_sha1(entry.path, commit_sha1)) - add_entry(commit_sha1, entry.sha1); - free(buf); -} - -static unsigned char *lookup_notes(const unsigned char *commit_sha1) -{ - int index; - - if (!hash_map.size) - return NULL; - - index = hash_index(&hash_map, commit_sha1); - if (index < 0) - return NULL; - return hash_map.entries[index].notes_sha1; -} - -void get_commit_notes(const struct commit *commit, struct strbuf *sb, - const char *output_encoding) -{ - static const char *utf8 = "utf-8"; - unsigned char *sha1; - char *msg, *msg_p; - unsigned long linelen, msglen; - enum object_type type; - - if (!initialized) { - const char *env = getenv(GIT_NOTES_REF_ENVIRONMENT); - if (env) - notes_ref_name = getenv(GIT_NOTES_REF_ENVIRONMENT); - else if (!notes_ref_name) - notes_ref_name = GIT_NOTES_DEFAULT_REF; - initialize_hash_map(notes_ref_name); - initialized = 1; - } - - sha1 = lookup_notes(commit->object.sha1); - if (!sha1) - return; - - if (!(msg = read_sha1_file(sha1, &type, &msglen)) || !msglen || - type != OBJ_BLOB) - return; - - if (output_encoding && *output_encoding && - strcmp(utf8, output_encoding)) { - char *reencoded = reencode_string(msg, output_encoding, utf8); - if (reencoded) { - free(msg); - msg = reencoded; - msglen = strlen(msg); - } - } - - /* we will end the annotation by a newline anyway */ - if (msglen && msg[msglen - 1] == '\n') - msglen--; - - strbuf_addstr(sb, "\nNotes:\n"); - - for (msg_p = msg; msg_p < msg + msglen; msg_p += linelen + 1) { - linelen = strchrnul(msg_p, '\n') - msg_p; - - strbuf_addstr(sb, " "); - strbuf_add(sb, msg_p, linelen); - strbuf_addch(sb, '\n'); - } - - free(msg); -} diff --git a/notes.h b/notes.h deleted file mode 100644 index 79d21b65f5..0000000000 --- a/notes.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef NOTES_H -#define NOTES_H - -void get_commit_notes(const struct commit *commit, struct strbuf *sb, - const char *output_encoding); - -#endif diff --git a/pretty.c b/pretty.c index 8d4dbc9fbb..cc460b5697 100644 --- a/pretty.c +++ b/pretty.c @@ -6,7 +6,6 @@ #include "string-list.h" #include "mailmap.h" #include "log-tree.h" -#include "notes.h" #include "color.h" static char *user_format; @@ -921,9 +920,5 @@ void pretty_print_commit(enum cmit_fmt fmt, const struct commit *commit, */ if (fmt == CMIT_FMT_EMAIL && sb->len <= beginning_of_body) strbuf_addch(sb, '\n'); - - if (fmt != CMIT_FMT_ONELINE) - get_commit_notes(commit, sb, encoding); - free(reencoded); } diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh deleted file mode 100755 index 9393a25511..0000000000 --- a/t/t3301-notes.sh +++ /dev/null @@ -1,95 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2007 Johannes E. Schindelin -# - -test_description='Test commit notes' - -. ./test-lib.sh - -cat > fake_editor.sh << \EOF -echo "$MSG" > "$1" -echo "$MSG" >& 2 -EOF -chmod a+x fake_editor.sh -VISUAL=./fake_editor.sh -export VISUAL - -test_expect_success 'cannot annotate non-existing HEAD' ' - ! MSG=3 git notes edit -' - -test_expect_success setup ' - : > a1 && - git add a1 && - test_tick && - git commit -m 1st && - : > a2 && - git add a2 && - test_tick && - git commit -m 2nd -' - -test_expect_success 'need valid notes ref' ' - ! MSG=1 GIT_NOTES_REF='/' git notes edit && - ! MSG=2 GIT_NOTES_REF='/' git notes show -' - -test_expect_success 'create notes' ' - git config core.notesRef refs/notes/commits && - MSG=b1 git notes edit && - test ! -f .git/new-notes && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b1 = $(git notes show) && - git show HEAD^ && - ! git notes show HEAD^ -' - -cat > expect << EOF -commit 268048bfb8a1fb38e703baceb8ab235421bf80c5 -Author: A U Thor -Date: Thu Apr 7 15:14:13 2005 -0700 - - 2nd - -Notes: - b1 -EOF - -test_expect_success 'show notes' ' - ! (git cat-file commit HEAD | grep b1) && - git log -1 > output && - test_cmp expect output -' -test_expect_success 'create multi-line notes (setup)' ' - : > a3 && - git add a3 && - test_tick && - git commit -m 3rd && - MSG="b3 -c3c3c3c3 -d3d3d3" git notes edit -' - -cat > expect-multiline << EOF -commit 1584215f1d29c65e99c6c6848626553fdd07fd75 -Author: A U Thor -Date: Thu Apr 7 15:15:13 2005 -0700 - - 3rd - -Notes: - b3 - c3c3c3c3 - d3d3d3 -EOF - -printf "\n" >> expect-multiline -cat expect >> expect-multiline - -test_expect_success 'show multi-line notes' ' - git log -2 > output && - test_cmp expect-multiline output -' - -test_done diff --git a/t/t3302-notes-index-expensive.sh b/t/t3302-notes-index-expensive.sh deleted file mode 100755 index 00d27bf6ef..0000000000 --- a/t/t3302-notes-index-expensive.sh +++ /dev/null @@ -1,98 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2007 Johannes E. Schindelin -# - -test_description='Test commit notes index (expensive!)' - -. ./test-lib.sh - -test -z "$GIT_NOTES_TIMING_TESTS" && { - say Skipping timing tests - test_done - exit -} - -create_repo () { - number_of_commits=$1 - nr=0 - parent= - test -d .git || { - git init && - tree=$(git write-tree) && - while [ $nr -lt $number_of_commits ]; do - test_tick && - commit=$(echo $nr | git commit-tree $tree $parent) || - return - parent="-p $commit" - nr=$(($nr+1)) - done && - git update-ref refs/heads/master $commit && - { - export GIT_INDEX_FILE=.git/temp; - git rev-list HEAD | cat -n | sed "s/^[ ][ ]*/ /g" | - while read nr sha1; do - blob=$(echo note $nr | git hash-object -w --stdin) && - echo $sha1 | sed "s/^/0644 $blob 0 /" - done | git update-index --index-info && - tree=$(git write-tree) && - test_tick && - commit=$(echo notes | git commit-tree $tree) && - git update-ref refs/notes/commits $commit - } && - git config core.notesRef refs/notes/commits - } -} - -test_notes () { - count=$1 && - git config core.notesRef refs/notes/commits && - git log | grep "^ " > output && - i=1 && - while [ $i -le $count ]; do - echo " $(($count-$i))" && - echo " note $i" && - i=$(($i+1)); - done > expect && - git diff expect output -} - -cat > time_notes << \EOF - mode=$1 - i=1 - while [ $i -lt $2 ]; do - case $1 in - no-notes) - export GIT_NOTES_REF=non-existing - ;; - notes) - unset GIT_NOTES_REF - ;; - esac - git log >/dev/null - i=$(($i+1)) - done -EOF - -time_notes () { - for mode in no-notes notes - do - echo $mode - /usr/bin/time sh ../time_notes $mode $1 - done -} - -for count in 10 100 1000 10000; do - - mkdir $count - (cd $count; - - test_expect_success "setup $count" "create_repo $count" - - test_expect_success 'notes work' "test_notes $count" - - test_expect_success 'notes timing' "time_notes 100" - ) -done - -test_done From 0ab9a8bbfe2af693444a8c9dd3afddeac08f5274 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Mon, 9 Feb 2009 14:39:30 +0100 Subject: [PATCH 044/149] Describe notable git.el changes in the release notes Signed-off-by: Alexandre Julliard Signed-off-by: Junio C Hamano --- Documentation/RelNotes-1.6.2.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/RelNotes-1.6.2.txt b/Documentation/RelNotes-1.6.2.txt index b86b684d23..6ed31595ba 100644 --- a/Documentation/RelNotes-1.6.2.txt +++ b/Documentation/RelNotes-1.6.2.txt @@ -25,8 +25,9 @@ Updates since v1.6.1 * gitweb updates, including a new patch view and RSS/Atom feed improvements. -* (contrib) git.el updates for better XEmacs compatibility; vc-git.el - is not shiped with git anymore (it is part of official Emacs) +* (contrib/emacs) git.el now has commands for checking out a branch, + creating a branch, cherry-picking and reverting commits; vc-git.el + is not shipped with git anymore (it is part of official Emacs). (performance) From 2f33415563a4e4deb45d88f71fdd8963793b5c0c Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Mon, 9 Feb 2009 13:39:52 -0800 Subject: [PATCH 045/149] Modernize t5400 test script Many tests checked for failure by hand without using test_must_fail (they probably predate the shell function). When we know the desired outcome, explicitly check for it, instead of checking if the result does not match one possible incorrect outcome. E.g. if you expect a push to be refused, you do not test if the result is different from what was pushed. Instead, make sure that the ref did not before and after the push. The test sequence chdir'ed around and any failure at one point could have started the next test in an unexpected directory. Fix this problem by using subshells as necessary. Signed-off-by: Junio C Hamano --- t/t5400-send-pack.sh | 184 ++++++++++++++++++++++--------------------- 1 file changed, 96 insertions(+), 88 deletions(-) diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index b21317d685..d6151f8854 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -32,9 +32,7 @@ test_expect_success setup ' done && git update-ref HEAD "$commit" && git clone ./. victim && - cd victim && - git log && - cd .. && + ( cd victim && git log ) && git update-ref HEAD "$zero" && parent=$zero && i=0 && @@ -59,88 +57,84 @@ test_expect_success 'pack the source repository' ' ' test_expect_success 'pack the destination repository' ' + ( cd victim && git repack -a -d && - git prune && - cd .. + git prune + ) ' -test_expect_success \ - 'pushing rewound head should not barf but require --force' ' - # should not fail but refuse to update. - if git send-pack ./victim/.git/ master - then - # now it should fail with Pasky patch - echo >&2 Gaah, it should have failed. - false - else - echo >&2 Thanks, it correctly failed. - true - fi && - if cmp victim/.git/refs/heads/master .git/refs/heads/master - then - # should have been left as it was! - false - else - true - fi && +test_expect_success 'refuse pushing rewound head without --force' ' + pushed_head=$(git rev-parse --verify master) && + victim_orig=$(cd victim && git rev-parse --verify master) && + test_must_fail git send-pack ./victim master && + victim_head=$(cd victim && git rev-parse --verify master) && + test "$victim_head" = "$victim_orig" && # this should update - git send-pack --force ./victim/.git/ master && - cmp victim/.git/refs/heads/master .git/refs/heads/master + git send-pack --force ./victim master && + victim_head=$(cd victim && git rev-parse --verify master) && + test "$victim_head" = "$pushed_head" ' test_expect_success \ 'push can be used to delete a ref' ' - cd victim && - git branch extra master && - cd .. && - test -f victim/.git/refs/heads/extra && - git send-pack ./victim/.git/ :extra master && - ! test -f victim/.git/refs/heads/extra + ( cd victim && git branch extra master ) && + git send-pack ./victim :extra master && + ( cd victim && + test_must_fail git rev-parse --verify extra ) ' -unset GIT_CONFIG -HOME=`pwd`/no-such-directory -export HOME ;# this way we force the victim/.git/config to be used. - -test_expect_success \ - 'pushing a delete should be denied with denyDeletes' ' - cd victim && - git config receive.denyDeletes true && - git branch extra master && - cd .. && - test -f victim/.git/refs/heads/extra && - test_must_fail git send-pack ./victim/.git/ :extra master -' -rm -f victim/.git/refs/heads/extra - -test_expect_success \ - 'pushing with --force should be denied with denyNonFastforwards' ' - cd victim && - git config receive.denyNonFastforwards true && - cd .. && - git update-ref refs/heads/master master^ || return 1 - git send-pack --force ./victim/.git/ master && return 1 - ! test_cmp .git/refs/heads/master victim/.git/refs/heads/master +test_expect_success 'refuse deleting push with denyDeletes' ' + ( + cd victim && + ( git branch -D extra || : ) && + git config receive.denyDeletes true && + git branch extra master + ) && + test_must_fail git send-pack ./victim :extra master ' -test_expect_success \ - 'pushing does not include non-head refs' ' - mkdir parent && cd parent && - git init && touch file && git add file && git commit -m add && - cd .. && - git clone parent child && cd child && git push --all && - cd ../parent && - git branch -a >branches && ! grep origin/master branches +test_expect_success 'denyNonFastforwards trumps --force' ' + ( + cd victim && + ( git branch -D extra || : ) && + git config receive.denyNonFastforwards true + ) && + victim_orig=$(cd victim && git rev-parse --verify master) && + test_must_fail git send-pack --force ./victim master^:master && + victim_head=$(cd victim && git rev-parse --verify master) && + test "$victim_orig" = "$victim_head" +' + +test_expect_success 'push --all excludes remote tracking hierarchy' ' + mkdir parent && + ( + cd parent && + git init && : >file && git add file && git commit -m add + ) && + git clone parent child && + ( + cd child && git push --all + ) && + ( + cd parent && + test -z "$(git for-each-ref refs/remotes/origin)" + ) ' rewound_push_setup() { rm -rf parent child && - mkdir parent && cd parent && - git init && echo one >file && git add file && git commit -m one && - echo two >file && git commit -a -m two && - cd .. && - git clone parent child && cd child && git reset --hard HEAD^ + mkdir parent && + ( + cd parent && + git init && + echo one >file && git add file && git commit -m one && + echo two >file && git commit -a -m two + ) && + git clone parent child && + ( + cd child && git reset --hard HEAD^ + ) } rewound_push_succeeded() { @@ -156,30 +150,44 @@ rewound_push_failed() { fi } -test_expect_success \ - 'pushing explicit refspecs respects forcing' ' +test_expect_success 'pushing explicit refspecs respects forcing' ' rewound_push_setup && - if git send-pack ../parent/.git refs/heads/master:refs/heads/master - then - false - else - true - fi && rewound_push_failed && - git send-pack ../parent/.git +refs/heads/master:refs/heads/master && - rewound_push_succeeded + parent_orig=$(cd parent && git rev-parse --verify master) && + ( + cd child && + test_must_fail git send-pack ../parent \ + refs/heads/master:refs/heads/master + ) && + parent_head=$(cd parent && git rev-parse --verify master) && + test "$parent_orig" = "$parent_head" && + ( + cd child && + git send-pack ../parent \ + +refs/heads/master:refs/heads/master + ) && + parent_head=$(cd parent && git rev-parse --verify master) && + child_head=$(cd parent && git rev-parse --verify master) && + test "$parent_head" = "$child_head" ' -test_expect_success \ - 'pushing wildcard refspecs respects forcing' ' +test_expect_success 'pushing wildcard refspecs respects forcing' ' rewound_push_setup && - if git send-pack ../parent/.git refs/heads/*:refs/heads/* - then - false - else - true - fi && rewound_push_failed && - git send-pack ../parent/.git +refs/heads/*:refs/heads/* && - rewound_push_succeeded + parent_orig=$(cd parent && git rev-parse --verify master) && + ( + cd child && + test_must_fail git send-pack ../parent \ + "refs/heads/*:refs/heads/*" + ) && + parent_head=$(cd parent && git rev-parse --verify master) && + test "$parent_orig" = "$parent_head" && + ( + cd child && + git send-pack ../parent \ + "+refs/heads/*:refs/heads/*" + ) && + parent_head=$(cd parent && git rev-parse --verify master) && + child_head=$(cd parent && git rev-parse --verify master) && + test "$parent_head" = "$child_head" ' test_done From fcb6c0760d14cd8ee284a0acf9f7424878cba5a0 Mon Sep 17 00:00:00 2001 From: Stephan Beyer Date: Mon, 9 Feb 2009 23:00:45 +0100 Subject: [PATCH 046/149] Makefile: resort filenames alphabetically Some filenames in the Makefile got out of order. This patch resorts the filename lists which makes it easier to grasp that it is sorted and that this should be kept. Signed-off-by: Stephan Beyer Signed-off-by: Junio C Hamano --- Makefile | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/Makefile b/Makefile index 627d4d09ba..108051b527 100644 --- a/Makefile +++ b/Makefile @@ -317,8 +317,8 @@ PROGRAMS += git-var$X # builtin-$C.o but is linked in as part of some other command. BUILT_INS += $(patsubst builtin-%.o,git-%$X,$(BUILTIN_OBJS)) -BUILT_INS += git-cherry-pick$X BUILT_INS += git-cherry$X +BUILT_INS += git-cherry-pick$X BUILT_INS += git-format-patch$X BUILT_INS += git-fsck-objects$X BUILT_INS += git-get-tar-commit-id$X @@ -357,8 +357,8 @@ LIB_H += builtin.h LIB_H += cache.h LIB_H += cache-tree.h LIB_H += commit.h -LIB_H += compat/mingw.h LIB_H += compat/cygwin.h +LIB_H += compat/mingw.h LIB_H += csum-file.h LIB_H += decorate.h LIB_H += delta.h @@ -383,7 +383,6 @@ LIB_H += pack-refs.h LIB_H += pack-revindex.h LIB_H += parse-options.h LIB_H += patch-ids.h -LIB_H += string-list.h LIB_H += pkt-line.h LIB_H += progress.h LIB_H += quote.h @@ -397,6 +396,7 @@ LIB_H += sha1-lookup.h LIB_H += sideband.h LIB_H += sigchain.h LIB_H += strbuf.h +LIB_H += string-list.h LIB_H += tag.h LIB_H += transport.h LIB_H += tree.h @@ -435,8 +435,8 @@ LIB_OBJS += diffcore-order.o LIB_OBJS += diffcore-pickaxe.o LIB_OBJS += diffcore-rename.o LIB_OBJS += diff-delta.o -LIB_OBJS += diff-no-index.o LIB_OBJS += diff-lib.o +LIB_OBJS += diff-no-index.o LIB_OBJS += diff.o LIB_OBJS += dir.o LIB_OBJS += editor.o @@ -468,9 +468,9 @@ LIB_OBJS += pager.o LIB_OBJS += parse-options.o LIB_OBJS += patch-delta.o LIB_OBJS += patch-ids.o -LIB_OBJS += string-list.o LIB_OBJS += path.o LIB_OBJS += pkt-line.o +LIB_OBJS += preload-index.o LIB_OBJS += pretty.o LIB_OBJS += progress.o LIB_OBJS += quote.o @@ -484,13 +484,14 @@ LIB_OBJS += revision.o LIB_OBJS += run-command.o LIB_OBJS += server-info.o LIB_OBJS += setup.o -LIB_OBJS += sha1_file.o LIB_OBJS += sha1-lookup.o +LIB_OBJS += sha1_file.o LIB_OBJS += sha1_name.o LIB_OBJS += shallow.o LIB_OBJS += sideband.o LIB_OBJS += sigchain.o LIB_OBJS += strbuf.o +LIB_OBJS += string-list.o LIB_OBJS += symlinks.o LIB_OBJS += tag.o LIB_OBJS += trace.o @@ -499,8 +500,8 @@ LIB_OBJS += tree-diff.o LIB_OBJS += tree.o LIB_OBJS += tree-walk.o LIB_OBJS += unpack-trees.o -LIB_OBJS += userdiff.o LIB_OBJS += usage.o +LIB_OBJS += userdiff.o LIB_OBJS += utf8.o LIB_OBJS += walker.o LIB_OBJS += wrapper.o @@ -508,7 +509,6 @@ LIB_OBJS += write_or_die.o LIB_OBJS += ws.o LIB_OBJS += wt-status.o LIB_OBJS += xdiff-interface.o -LIB_OBJS += preload-index.o BUILTIN_OBJS += builtin-add.o BUILTIN_OBJS += builtin-annotate.o From 75f3ff2eeaba820b37016f464b6d1078cb6260e2 Mon Sep 17 00:00:00 2001 From: Stephan Beyer Date: Tue, 10 Feb 2009 15:30:35 +0100 Subject: [PATCH 047/149] Generalize and libify index_is_dirty() to index_differs_from(...) index_is_dirty() in builtin-revert.c checks if the index is dirty. This patch generalizes this function to check if the index differs from a revision, i.e. the former index_is_dirty() behavior can now be achieved by index_differs_from("HEAD", 0). The second argument "diff_flags" allows to set further diff option flags like DIFF_OPT_IGNORE_SUBMODULES. See DIFF_OPT_* macros in diff.h for a list. index_differs_from() seems to be useful for more than builtin-revert.c, so it is moved into diff-lib.c and also used in builtin-commit.c. Yet to mention: - "rev.abbrev = 0;" can be safely removed. This has no impact on performance or functioning of neither setup_revisions() nor run_diff_index(). - rev.pending.objects is free()d because this fixes a leak. (Also see 295dd2ad "Fix memory leak in traverse_commit_list") Mentored-by: Daniel Barkalow Mentored-by: Christian Couder Signed-off-by: Stephan Beyer Signed-off-by: Junio C Hamano --- builtin-commit.c | 13 ++----------- builtin-revert.c | 13 +------------ diff-lib.c | 15 +++++++++++++++ diff.h | 2 ++ 4 files changed, 20 insertions(+), 23 deletions(-) diff --git a/builtin-commit.c b/builtin-commit.c index d6a3a6203a..46e649cd7c 100644 --- a/builtin-commit.c +++ b/builtin-commit.c @@ -561,7 +561,6 @@ static int prepare_to_commit(const char *index_file, const char *prefix) commitable = run_status(fp, index_file, prefix, 1); wt_status_use_color = saved_color_setting; } else { - struct rev_info rev; unsigned char sha1[20]; const char *parent = "HEAD"; @@ -573,16 +572,8 @@ static int prepare_to_commit(const char *index_file, const char *prefix) if (get_sha1(parent, sha1)) commitable = !!active_nr; - else { - init_revisions(&rev, ""); - rev.abbrev = 0; - setup_revisions(0, NULL, &rev, parent); - DIFF_OPT_SET(&rev.diffopt, QUIET); - DIFF_OPT_SET(&rev.diffopt, EXIT_WITH_STATUS); - run_diff_index(&rev, 1 /* cached */); - - commitable = !!DIFF_OPT_TST(&rev.diffopt, HAS_CHANGES); - } + else + commitable = index_differs_from(parent, 0); } fclose(fp); diff --git a/builtin-revert.c b/builtin-revert.c index d48313c745..d210150671 100644 --- a/builtin-revert.c +++ b/builtin-revert.c @@ -223,17 +223,6 @@ static char *help_msg(const unsigned char *sha1) return helpbuf; } -static int index_is_dirty(void) -{ - struct rev_info rev; - init_revisions(&rev, NULL); - setup_revisions(0, NULL, &rev, "HEAD"); - DIFF_OPT_SET(&rev.diffopt, QUIET); - DIFF_OPT_SET(&rev.diffopt, EXIT_WITH_STATUS); - run_diff_index(&rev, 1); - return !!DIFF_OPT_TST(&rev.diffopt, HAS_CHANGES); -} - static struct tree *empty_tree(void) { struct tree *tree = xcalloc(1, sizeof(struct tree)); @@ -279,7 +268,7 @@ static int revert_or_cherry_pick(int argc, const char **argv) } else { if (get_sha1("HEAD", head)) die ("You do not have a valid HEAD"); - if (index_is_dirty()) + if (index_differs_from("HEAD", 0)) die ("Dirty index: cannot %s", me); } discard_cache(); diff --git a/diff-lib.c b/diff-lib.c index a41e1ec07c..79d0606834 100644 --- a/diff-lib.c +++ b/diff-lib.c @@ -513,3 +513,18 @@ int do_diff_cache(const unsigned char *tree_sha1, struct diff_options *opt) exit(128); return 0; } + +int index_differs_from(const char *def, int diff_flags) +{ + struct rev_info rev; + + init_revisions(&rev, NULL); + setup_revisions(0, NULL, &rev, def); + DIFF_OPT_SET(&rev.diffopt, QUIET); + DIFF_OPT_SET(&rev.diffopt, EXIT_WITH_STATUS); + rev.diffopt.flags |= diff_flags; + run_diff_index(&rev, 1); + if (rev.pending.alloc) + free(rev.pending.objects); + return (DIFF_OPT_TST(&rev.diffopt, HAS_CHANGES) != 0); +} diff --git a/diff.h b/diff.h index 23cd90c2e6..6703a4fb4f 100644 --- a/diff.h +++ b/diff.h @@ -265,4 +265,6 @@ extern int diff_result_code(struct diff_options *, int); extern void diff_no_index(struct rev_info *, int, const char **, int, const char *); +extern int index_differs_from(const char *def, int diff_flags); + #endif /* DIFF_H */ From 8ea7ad694be942350457197357127ed81b2550fe Mon Sep 17 00:00:00 2001 From: Michael J Gruber Date: Tue, 10 Feb 2009 16:14:13 +0100 Subject: [PATCH 048/149] Fix the installation path for html documentation 026fa0d (Move computation of absolute paths from Makefile to runtime in preparation for RUNTIME_PREFIX, 2009-01-18) broke the installation of html documentation. A relative htmldir is given to Documentation/Makefile and html documentations are installed in a subdirectory of "Documentation" in the source tree. Fix this by not exporting htmldir from Makefile; this allows Documentation/Makefile to compute the htmldir from the prefix. Signed-off-by: Michael J Gruber Signed-off-by: Junio C Hamano --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 108051b527..b040a96e50 100644 --- a/Makefile +++ b/Makefile @@ -228,7 +228,7 @@ GITWEB_FAVICON = git-favicon.png GITWEB_SITE_HEADER = GITWEB_SITE_FOOTER = -export prefix bindir sharedir htmldir sysconfdir +export prefix bindir sharedir sysconfdir CC = gcc AR = ar From f8948e2fbc7fbd63e81006408965e3e89380bfaa Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sun, 8 Feb 2009 23:27:10 -0800 Subject: [PATCH 049/149] remote prune: warn dangling symrefs If you prune from the remote "frotz" that deleted the ref your tracking branch remotes/frotz/HEAD points at, the symbolic ref will become dangling. We used to detect this as an error condition and issued a message every time refs are enumerated. This stops the error message, but moves the warning to "remote prune". Signed-off-by: Junio C Hamano --- builtin-remote.c | 6 ++++ refs.c | 72 +++++++++++++++++++++++++++++++++++------------ refs.h | 5 ++++ t/t5505-remote.sh | 21 ++++++++++++++ 4 files changed, 86 insertions(+), 18 deletions(-) diff --git a/builtin-remote.c b/builtin-remote.c index db18bcfc97..ac69d37c8a 100644 --- a/builtin-remote.c +++ b/builtin-remote.c @@ -756,12 +756,17 @@ static int prune(int argc, const char **argv) OPT_END() }; struct ref_states states; + const char *dangling_msg; argc = parse_options(argc, argv, options, builtin_remote_usage, 0); if (argc < 1) usage_with_options(builtin_remote_usage, options); + dangling_msg = (dry_run + ? " %s will become dangling!\n" + : " %s has become dangling!\n"); + memset(&states, 0, sizeof(states)); for (; argc; argc--, argv++) { int i; @@ -784,6 +789,7 @@ static int prune(int argc, const char **argv) printf(" * [%s] %s\n", dry_run ? "would prune" : "pruned", abbrev_ref(refname, "refs/remotes/")); + warn_dangling_symref(dangling_msg, refname); } /* NEEDSWORK: free remote */ diff --git a/refs.c b/refs.c index 024211d72b..6eb5f53846 100644 --- a/refs.c +++ b/refs.c @@ -275,10 +275,8 @@ static struct ref_list *get_ref_dir(const char *base, struct ref_list *list) list = get_ref_dir(ref, list); continue; } - if (!resolve_ref(ref, sha1, 1, &flag)) { - error("%s points nowhere!", ref); - continue; - } + if (!resolve_ref(ref, sha1, 1, &flag)) + hashclr(sha1); list = add_ref(ref, sha1, flag, list, NULL); } free(ref); @@ -287,6 +285,35 @@ static struct ref_list *get_ref_dir(const char *base, struct ref_list *list) return sort_ref_list(list); } +struct warn_if_dangling_data { + const char *refname; + const char *msg_fmt; +}; + +static int warn_if_dangling_symref(const char *refname, const unsigned char *sha1, + int flags, void *cb_data) +{ + struct warn_if_dangling_data *d = cb_data; + const char *resolves_to; + unsigned char junk[20]; + + if (!(flags & REF_ISSYMREF)) + return 0; + + resolves_to = resolve_ref(refname, junk, 0, NULL); + if (!resolves_to || strcmp(resolves_to, d->refname)) + return 0; + + printf(d->msg_fmt, refname); + return 0; +} + +void warn_dangling_symref(const char *msg_fmt, const char *refname) +{ + struct warn_if_dangling_data data = { refname, msg_fmt }; + for_each_rawref(warn_if_dangling_symref, &data); +} + static struct ref_list *get_loose_refs(void) { if (!cached_refs.did_loose) { @@ -498,16 +525,19 @@ int read_ref(const char *ref, unsigned char *sha1) return -1; } +#define DO_FOR_EACH_INCLUDE_BROKEN 01 static int do_one_ref(const char *base, each_ref_fn fn, int trim, - void *cb_data, struct ref_list *entry) + int flags, void *cb_data, struct ref_list *entry) { if (strncmp(base, entry->name, trim)) return 0; - if (is_null_sha1(entry->sha1)) - return 0; - if (!has_sha1_file(entry->sha1)) { - error("%s does not point to a valid object!", entry->name); - return 0; + if (!(flags & DO_FOR_EACH_INCLUDE_BROKEN)) { + if (is_null_sha1(entry->sha1)) + return 0; + if (!has_sha1_file(entry->sha1)) { + error("%s does not point to a valid object!", entry->name); + return 0; + } } current_ref = entry; return fn(entry->name + trim, entry->sha1, entry->flag, cb_data); @@ -561,7 +591,7 @@ fallback: } static int do_for_each_ref(const char *base, each_ref_fn fn, int trim, - void *cb_data) + int flags, void *cb_data) { int retval = 0; struct ref_list *packed = get_packed_refs(); @@ -570,7 +600,7 @@ static int do_for_each_ref(const char *base, each_ref_fn fn, int trim, struct ref_list *extra; for (extra = extra_refs; extra; extra = extra->next) - retval = do_one_ref(base, fn, trim, cb_data, extra); + retval = do_one_ref(base, fn, trim, flags, cb_data, extra); while (packed && loose) { struct ref_list *entry; @@ -586,13 +616,13 @@ static int do_for_each_ref(const char *base, each_ref_fn fn, int trim, entry = packed; packed = packed->next; } - retval = do_one_ref(base, fn, trim, cb_data, entry); + retval = do_one_ref(base, fn, trim, flags, cb_data, entry); if (retval) goto end_each; } for (packed = packed ? packed : loose; packed; packed = packed->next) { - retval = do_one_ref(base, fn, trim, cb_data, packed); + retval = do_one_ref(base, fn, trim, flags, cb_data, packed); if (retval) goto end_each; } @@ -614,22 +644,28 @@ int head_ref(each_ref_fn fn, void *cb_data) int for_each_ref(each_ref_fn fn, void *cb_data) { - return do_for_each_ref("refs/", fn, 0, cb_data); + return do_for_each_ref("refs/", fn, 0, 0, cb_data); } int for_each_tag_ref(each_ref_fn fn, void *cb_data) { - return do_for_each_ref("refs/tags/", fn, 10, cb_data); + return do_for_each_ref("refs/tags/", fn, 10, 0, cb_data); } int for_each_branch_ref(each_ref_fn fn, void *cb_data) { - return do_for_each_ref("refs/heads/", fn, 11, cb_data); + return do_for_each_ref("refs/heads/", fn, 11, 0, cb_data); } int for_each_remote_ref(each_ref_fn fn, void *cb_data) { - return do_for_each_ref("refs/remotes/", fn, 13, cb_data); + return do_for_each_ref("refs/remotes/", fn, 13, 0, cb_data); +} + +int for_each_rawref(each_ref_fn fn, void *cb_data) +{ + return do_for_each_ref("refs/", fn, 0, + DO_FOR_EACH_INCLUDE_BROKEN, cb_data); } /* diff --git a/refs.h b/refs.h index 3bb529d387..29bdcecd4e 100644 --- a/refs.h +++ b/refs.h @@ -24,6 +24,11 @@ extern int for_each_tag_ref(each_ref_fn, void *); extern int for_each_branch_ref(each_ref_fn, void *); extern int for_each_remote_ref(each_ref_fn, void *); +/* can be used to learn about broken ref and symref */ +extern int for_each_rawref(each_ref_fn, void *); + +extern void warn_dangling_symref(const char *msg_fmt, const char *refname); + /* * Extra refs will be listed by for_each_ref() before any actual refs * for the duration of this process or until clear_extra_refs() is diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index bc5b7ce4a6..2067dc558f 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -402,4 +402,25 @@ test_expect_success 'migrate a remote from named file in $GIT_DIR/branches' ' test "$(git config remote.origin.fetch)" = "refs/heads/master:refs/heads/origin") ' +test_expect_success 'remote prune to cause a dangling symref' ' + git clone one seven && + ( + cd one && + git checkout side2 && + git branch -D master + ) && + ( + cd seven && + git remote prune origin + ) 2>err && + grep "has become dangling" err && + + : And the dangling symref will not cause other annoying errors + ( + cd seven && + git branch -a + ) 2>err && + ! grep "points nowhere" err +' + test_done From 057e71384a0eff83236268dcd3ff7ebc7789de74 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sun, 8 Feb 2009 23:52:01 -0800 Subject: [PATCH 050/149] Warn use of "origin" when remotes/origin/HEAD is dangling The previous one squelched the diagnositic message we used to issue every time we enumerated the refs and noticed a dangling ref. This adds the warning back to the place where the user actually attempts to use it. Signed-off-by: Junio C Hamano --- sha1_name.c | 6 ++++-- t/t5505-remote.sh | 6 ++++++ 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/sha1_name.c b/sha1_name.c index 5d0ac0263d..3bd2ef0e7c 100644 --- a/sha1_name.c +++ b/sha1_name.c @@ -268,16 +268,18 @@ int dwim_ref(const char *str, int len, unsigned char *sha1, char **ref) char fullref[PATH_MAX]; unsigned char sha1_from_ref[20]; unsigned char *this_result; + int flag; this_result = refs_found ? sha1_from_ref : sha1; mksnpath(fullref, sizeof(fullref), *p, len, str); - r = resolve_ref(fullref, this_result, 1, NULL); + r = resolve_ref(fullref, this_result, 1, &flag); if (r) { if (!refs_found++) *ref = xstrdup(r); if (!warn_ambiguous_refs) break; - } + } else if (flag & REF_ISSYMREF) + warning("ignoring dangling symref %s.", fullref); } free(last_branch); return refs_found; diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index 2067dc558f..eb637184a0 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -421,6 +421,12 @@ test_expect_success 'remote prune to cause a dangling symref' ' git branch -a ) 2>err && ! grep "points nowhere" err + ( + cd seven && + test_must_fail git branch nomore origin + ) 2>err && + grep "dangling symref" err ' test_done + From ba19a808aa871f0eb20aaeeb205e086b04b726dc Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Tue, 10 Feb 2009 17:42:04 -0800 Subject: [PATCH 051/149] Drop double-semicolon in C The worst offenders are "continue;;" and "break;;" in switch statements. Signed-off-by: Junio C Hamano --- fast-import.c | 2 +- rerere.c | 2 +- tree.c | 2 +- walker.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fast-import.c b/fast-import.c index 03b13e0621..3ef3413e69 100644 --- a/fast-import.c +++ b/fast-import.c @@ -869,7 +869,7 @@ static char *create_index(void) /* Generate the fan-out array. */ c = idx; for (i = 0; i < 256; i++) { - struct object_entry **next = c;; + struct object_entry **next = c; while (next < last) { if ((*next)->sha1[0] != i) break; diff --git a/rerere.c b/rerere.c index 718fb526dd..3518207c17 100644 --- a/rerere.c +++ b/rerere.c @@ -290,7 +290,7 @@ static int do_plain_rerere(struct string_list *rr, int fd) hex = xstrdup(sha1_to_hex(sha1)); string_list_insert(path, rr)->util = hex; if (mkdir(git_path("rr-cache/%s", hex), 0755)) - continue;; + continue; handle_file(path, NULL, rr_path(hex, "preimage")); fprintf(stderr, "Recorded preimage for '%s'\n", path); } diff --git a/tree.c b/tree.c index dfe4d5f303..25d2e29fa8 100644 --- a/tree.c +++ b/tree.c @@ -110,7 +110,7 @@ int read_tree_recursive(struct tree *tree, case 0: continue; case READ_TREE_RECURSIVE: - break;; + break; default: return -1; } diff --git a/walker.c b/walker.c index 679adab6a0..e57630e983 100644 --- a/walker.c +++ b/walker.c @@ -18,7 +18,7 @@ void walker_say(struct walker *walker, const char *fmt, const char *hex) static void report_missing(const struct object *obj) { char missing_hex[41]; - strcpy(missing_hex, sha1_to_hex(obj->sha1));; + strcpy(missing_hex, sha1_to_hex(obj->sha1)); fprintf(stderr, "Cannot obtain needed %s %s\n", obj->type ? typename(obj->type): "object", missing_hex); if (!is_null_sha1(current_commit_sha1)) From 747ca2455a8dd4e255358f5f96773f84259408c3 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sun, 8 Feb 2009 22:31:21 -0800 Subject: [PATCH 052/149] receive-pack: receive.denyDeleteCurrent This is a companion patch to the recent 3d95d92 (receive-pack: explain what to do when push updates the current branch, 2009-01-31). Deleting the current branch from a remote will result in the next clone from it not check out anything, among other things. It also is one of the cause that makes remotes/origin/HEAD a dangling symbolic ref. This patch still allows the traditional behaviour but with a big warning, and promises that the default will change to 'refuse' in a future release. Signed-off-by: Junio C Hamano --- builtin-receive-pack.c | 72 +++++++++++++++++++++++++++++++++++------- t/t5400-send-pack.sh | 13 ++++++++ 2 files changed, 74 insertions(+), 11 deletions(-) diff --git a/builtin-receive-pack.c b/builtin-receive-pack.c index 6de186c397..1dc373e310 100644 --- a/builtin-receive-pack.c +++ b/builtin-receive-pack.c @@ -21,11 +21,13 @@ enum deny_action { static int deny_deletes = 0; static int deny_non_fast_forwards = 0; static enum deny_action deny_current_branch = DENY_UNCONFIGURED; +static enum deny_action deny_delete_current = DENY_UNCONFIGURED; static int receive_fsck_objects; static int receive_unpack_limit = -1; static int transfer_unpack_limit = -1; static int unpack_limit = 100; static int report_status; +static const char *head_name; static char capabilities[] = " report-status delete-refs "; static int capabilities_sent; @@ -77,6 +79,11 @@ static int receive_pack_config(const char *var, const char *value, void *cb) return 0; } + if (strcmp(var, "receive.denydeletecurrent") == 0) { + deny_delete_current = parse_deny_action(var, value); + return 0; + } + return git_default_config(var, value, cb); } @@ -203,16 +210,12 @@ static int run_update_hook(struct command *cmd) static int is_ref_checked_out(const char *ref) { - unsigned char sha1[20]; - const char *head; - if (is_bare_repository()) return 0; - head = resolve_ref("HEAD", sha1, 0, NULL); - if (!head) + if (!head_name) return 0; - return !strcmp(head, ref); + return !strcmp(head_name, ref); } static char *warn_unconfigured_deny_msg[] = { @@ -244,6 +247,32 @@ static void warn_unconfigured_deny(void) warning(warn_unconfigured_deny_msg[i]); } +static char *warn_unconfigured_deny_delete_current_msg[] = { + "Deleting the current branch can cause confusion by making the next", + "'git clone' not check out any file.", + "", + "You can set 'receive.denyDeleteCurrent' configuration variable to", + "'refuse' in the remote repository to disallow deleting the current", + "branch.", + "", + "You can set it to 'ignore' to allow such a delete without a warning.", + "", + "To make this warning message less loud, you can set it to 'warn'.", + "", + "Note that the default will change in a future version of git", + "to refuse deleting the current branch unless you have the", + "configuration variable set to either 'ignore' or 'warn'." +}; + +static void warn_unconfigured_deny_delete_current(void) +{ + int i; + for (i = 0; + i < ARRAY_SIZE(warn_unconfigured_deny_delete_current_msg); + i++) + warning(warn_unconfigured_deny_delete_current_msg[i]); +} + static const char *update(struct command *cmd) { const char *name = cmd->ref_name; @@ -278,12 +307,30 @@ static const char *update(struct command *cmd) "but I can't find it!", sha1_to_hex(new_sha1)); return "bad pack"; } - if (deny_deletes && is_null_sha1(new_sha1) && - !is_null_sha1(old_sha1) && - !prefixcmp(name, "refs/heads/")) { - error("denying ref deletion for %s", name); - return "deletion prohibited"; + + if (!is_null_sha1(old_sha1) && is_null_sha1(new_sha1)) { + if (deny_deletes && !prefixcmp(name, "refs/heads/")) { + error("denying ref deletion for %s", name); + return "deletion prohibited"; + } + + if (!strcmp(name, head_name)) { + switch (deny_delete_current) { + case DENY_IGNORE: + break; + case DENY_WARN: + case DENY_UNCONFIGURED: + if (deny_delete_current == DENY_UNCONFIGURED) + warn_unconfigured_deny_delete_current(); + warning("deleting the current branch"); + break; + case DENY_REFUSE: + error("refusing to delete the current branch: %s", name); + return "deletion of the current branch prohibited"; + } + } } + if (deny_non_fast_forwards && !is_null_sha1(new_sha1) && !is_null_sha1(old_sha1) && !prefixcmp(name, "refs/heads/")) { @@ -377,6 +424,7 @@ static void run_update_post_hook(struct command *cmd) static void execute_commands(const char *unpacker_error) { struct command *cmd = commands; + unsigned char sha1[20]; if (unpacker_error) { while (cmd) { @@ -394,6 +442,8 @@ static void execute_commands(const char *unpacker_error) return; } + head_name = resolve_ref("HEAD", sha1, 0, NULL); + while (cmd) { cmd->error_string = update(cmd); cmd = cmd->next; diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index d6151f8854..f2d5581b12 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -190,4 +190,17 @@ test_expect_success 'pushing wildcard refspecs respects forcing' ' test "$parent_head" = "$child_head" ' +test_expect_success 'warn pushing to delete current branch' ' + rewound_push_setup && + ( + cd child && + git send-pack ../parent :refs/heads/master 2>errs + ) && + grep "warning: to refuse deleting" child/errs && + ( + cd parent && + test_must_fail git rev-parse --verify master + ) +' + test_done From 1b53a076fc3e3dc58e67971df18df0ce973a3ff9 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sun, 8 Feb 2009 22:19:43 -0800 Subject: [PATCH 053/149] builtin-receive-pack.c: do not initialize statics to 0 Signed-off-by: Junio C Hamano --- builtin-receive-pack.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/builtin-receive-pack.c b/builtin-receive-pack.c index 1dc373e310..f7e04c45f9 100644 --- a/builtin-receive-pack.c +++ b/builtin-receive-pack.c @@ -18,8 +18,8 @@ enum deny_action { DENY_REFUSE, }; -static int deny_deletes = 0; -static int deny_non_fast_forwards = 0; +static int deny_deletes; +static int deny_non_fast_forwards; static enum deny_action deny_current_branch = DENY_UNCONFIGURED; static enum deny_action deny_delete_current = DENY_UNCONFIGURED; static int receive_fsck_objects; From ed62089c1c32a9bfca2ec61d331a70443647344c Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Wed, 11 Feb 2009 01:27:43 -0800 Subject: [PATCH 054/149] revision traversal and pack: notice and die on missing commit cc0e6c5 (Handle return code of parse_commit in revision machinery, 2007-05-04) attempted to tighten error checking in the revision machinery, but it wasn't enough. When get_revision_1() was asked for the next commit to return, it tries to read and simplify the parents of the commit to be returned, but an error while doing so was silently ignored and reported as a truncated history to the caller instead. This resulted in an early end of "git log" output or a pack that lacks older commits from "git pack-objects", without any error indication in the exit status from these commands, even though the underlying parse_commit() issues an error message to the end user. Note that the codepath in add_parents_list() that paints parents of an UNINTERESTING commit UNINTERESTING silently ignores the error when parse_commit() fails; this is deliberate and in line with aeeae1b (revision traversal: allow UNINTERESTING objects to be missing, 2009-01-27). Signed-off-by: Junio C Hamano --- revision.c | 6 ++++-- t/t5307-pack-missing-commit.sh | 39 ++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+), 2 deletions(-) create mode 100755 t/t5307-pack-missing-commit.sh diff --git a/revision.c b/revision.c index d79f2b3a7b..b8c015eedd 100644 --- a/revision.c +++ b/revision.c @@ -1484,14 +1484,16 @@ static struct commit *get_revision_1(struct rev_info *revs) (commit->date < revs->max_age)) continue; if (add_parents_to_list(revs, commit, &revs->commits) < 0) - return NULL; + die("Failed to traverse parents of commit %s", + sha1_to_hex(commit->object.sha1)); } switch (simplify_commit(revs, commit)) { case commit_ignore: continue; case commit_error: - return NULL; + die("Failed to simplify parents of commit %s", + sha1_to_hex(commit->object.sha1)); default: return commit; } diff --git a/t/t5307-pack-missing-commit.sh b/t/t5307-pack-missing-commit.sh new file mode 100755 index 0000000000..ae52a1882d --- /dev/null +++ b/t/t5307-pack-missing-commit.sh @@ -0,0 +1,39 @@ +#!/bin/sh + +test_description='pack should notice missing commit objects' + +. ./test-lib.sh + +test_expect_success setup ' + for i in 1 2 3 4 5 + do + echo "$i" >"file$i" && + git add "file$i" && + test_tick && + git commit -m "$i" && + git tag "tag$i" + done && + obj=$(git rev-parse --verify tag3) && + fanout=$(expr "$obj" : "\(..\)") && + remainder=$(expr "$obj" : "..\(.*\)") && + rm -f ".git/objects/$fanout/$remainder" +' + +test_expect_success 'check corruption' ' + test_must_fail git fsck +' + +test_expect_success 'rev-list notices corruption (1)' ' + test_must_fail git rev-list HEAD +' + +test_expect_success 'rev-list notices corruption (2)' ' + test_must_fail git rev-list --objects HEAD +' + +test_expect_success 'pack-objects notices corruption' ' + echo HEAD | + test_must_fail git pack-objects --revs pack +' + +test_done From 4c58a7111d9fb4f62ca041fc73e8aec0a2f9c800 Mon Sep 17 00:00:00 2001 From: Eric Wong Date: Sat, 31 Jan 2009 17:31:12 -0800 Subject: [PATCH 055/149] git-svn: allow disabling expensive broken symlink checks Since dbc6c74d0858d77e61e092a48d467e725211f8e9, git-svn has had an expensive check for broken symlinks that exist in some repositories. This leads to a heavy performance hit on repositories with many empty blobs that are not supposed to be symlinks. The workaround is enabled by default; and may be disabled via: git config svn.brokenSymlinkWorkaround false Reported by Markus Heidelberg. Signed-off-by: Eric Wong --- Documentation/git-svn.txt | 8 ++++++++ git-svn.perl | 20 ++++++++++++++++++++ t/t9131-git-svn-empty-symlink.sh | 10 ++++++++++ 3 files changed, 38 insertions(+) diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 7b654f7928..3d456545d7 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -499,6 +499,14 @@ svn-remote..rewriteRoot:: the repository with a public http:// or svn:// URL in the metadata so users of it will see the public URL. +svn.brokenSymlinkWorkaround:: +This disables potentially expensive checks to workaround broken symlinks +checked into SVN by broken clients. Set this option to "false" if you +track a SVN repository with many empty blobs that are not symlinks. +This option may be changed while "git-svn" is running and take effect on +the next revision fetched. If unset, git-svn assumes this option to be +"true". + -- Since the noMetadata, rewriteRoot, useSvnsyncProps and useSvmProps diff --git a/git-svn.perl b/git-svn.perl index 79888a05c4..bebcbdea20 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -3271,10 +3271,18 @@ sub new { # do_{switch,update} sub _mark_empty_symlinks { my ($git_svn) = @_; + my $bool = Git::config_bool('svn.brokenSymlinkWorkaround'); + return {} if (defined($bool) && ! $bool); + my %ret; my ($rev, $cmt) = $git_svn->last_rev_commit; return {} unless ($rev && $cmt); + # allow the warning to be printed for each revision we fetch to + # ensure the user sees it. The user can also disable the workaround + # on the repository even while git svn is running and the next + # revision fetched will skip this expensive function. + my $printed_warning; chomp(my $empty_blob = `git hash-object -t blob --stdin < /dev/null`); my ($ls, $ctx) = command_output_pipe(qw/ls-tree -r -z/, $cmt); local $/ = "\0"; @@ -3283,6 +3291,18 @@ sub _mark_empty_symlinks { while (<$ls>) { chomp; s/\A100644 blob $empty_blob\t//o or next; + unless ($printed_warning) { + print STDERR "Scanning for empty symlinks, ", + "this may take a while if you have ", + "many empty files\n", + "You may disable this with `", + "git config svn.brokenSymlinkWorkaround ", + "false'.\n", + "This may be done in a different ", + "terminal without restarting ", + "git svn\n"; + $printed_warning = 1; + } my $path = $_; my (undef, $props) = $git_svn->ra->get_file($pfx.$path, $rev, undef); diff --git a/t/t9131-git-svn-empty-symlink.sh b/t/t9131-git-svn-empty-symlink.sh index 704a4f8574..20529a878c 100755 --- a/t/t9131-git-svn-empty-symlink.sh +++ b/t/t9131-git-svn-empty-symlink.sh @@ -87,4 +87,14 @@ test_expect_success '"bar" is an empty file' 'test -f x/bar && ! test -s x/bar' test_expect_success 'get "bar" => symlink fix from svn' \ '(cd x && git svn rebase)' test_expect_success '"bar" becomes a symlink' 'test -L x/bar' + + +test_expect_success 'clone using git svn' 'git svn clone -r1 "$svnrepo" y' +test_expect_success 'disable broken symlink workaround' \ + '(cd y && git config svn.brokenSymlinkWorkaround false)' +test_expect_success '"bar" is an empty file' 'test -f y/bar && ! test -s y/bar' +test_expect_success 'get "bar" => symlink fix from svn' \ + '(cd y && git svn rebase)' +test_expect_success '"bar" does not become a symlink' '! test -L y/bar' + test_done From 8e3f9b17a5186c8122eebf5cefdf6062a21f07d9 Mon Sep 17 00:00:00 2001 From: Sam Vilain Date: Tue, 26 Jun 2007 19:23:59 +1200 Subject: [PATCH 056/149] git-svn: abstract out a block into new method other_gs() We will be adding a more places that need to find git revisions corresponding to new parents, so abstract out this section into a new method. Signed-off-by: Yuval Kogman Signed-off-by: Sam Vilain Acked-by: Eric Wong [ew: minor formatting changes] --- git-svn.perl | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/git-svn.perl b/git-svn.perl index bebcbdea20..b0ae05bc40 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -2389,22 +2389,8 @@ sub find_parent_branch { print STDERR "Found possible branch point: ", "$new_url => ", $self->full_url, ", $r\n"; $branch_from =~ s#^/##; - my $gs = Git::SVN->find_by_url($new_url, $repos_root, $branch_from); - unless ($gs) { - my $ref_id = $self->{ref_id}; - $ref_id =~ s/\@\d+$//; - $ref_id .= "\@$r"; - # just grow a tail if we're not unique enough :x - $ref_id .= '-' while find_ref($ref_id); - print STDERR "Initializing parent: $ref_id\n"; - my ($u, $p, $repo_id) = ($new_url, '', $ref_id); - if ($u =~ s#^\Q$url\E(/|$)##) { - $p = $u; - $u = $url; - $repo_id = $self->{repo_id}; - } - $gs = Git::SVN->init($u, $p, $repo_id, $ref_id, 1); - } + my $gs = $self->other_gs($new_url, $url, $repos_root, + $branch_from, $r, $self->{ref_id}); my ($r0, $parent) = $gs->find_rev_before($r, 1); { my ($base, $head); @@ -2586,6 +2572,28 @@ sub parse_svn_date { return $parsed_date; } +sub other_gs { + my ($self, $new_url, $url, $repos_root, + $branch_from, $r, $old_ref_id) = @_; + my $gs = Git::SVN->find_by_url($new_url, $repos_root, $branch_from); + unless ($gs) { + my $ref_id = $old_ref_id; + $ref_id =~ s/\@\d+$//; + $ref_id .= "\@$r"; + # just grow a tail if we're not unique enough :x + $ref_id .= '-' while find_ref($ref_id); + print STDERR "Initializing parent: $ref_id\n"; + my ($u, $p, $repo_id) = ($new_url, '', $ref_id); + if ($u =~ s#^\Q$url\E(/|$)##) { + $p = $u; + $u = $url; + $repo_id = $self->{repo_id}; + } + $gs = Git::SVN->init($u, $p, $repo_id, $ref_id, 1); + } + $gs +} + sub check_author { my ($author) = @_; if (!defined $author || length $author == 0) { From 99366565f1a78f9089c0e505ddaee47b31928f1d Mon Sep 17 00:00:00 2001 From: Deskin Miller Date: Sun, 8 Feb 2009 19:33:18 -0500 Subject: [PATCH 057/149] git-svn: Print revision while searching for earliest use of path When initializing a git-svn repository from a Subversion repoository, it is common to be interested in a path which did not exist in the initial commit to Subversion. In a large repository, the initial fetch may take some looking for the earliest existence of the path time while the user receives no additional feedback. Print the highest revision number scanned thus far to let the user know something is still happening. Signed-off-by: Deskin Miller --- git-svn.perl | 3 +++ 1 file changed, 3 insertions(+) diff --git a/git-svn.perl b/git-svn.perl index b0ae05bc40..9baf8221c3 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -4376,6 +4376,9 @@ sub gs_fetch_loop_common { } $self->get_log([$longest_path], $min, $max, 0, 1, 1, sub { $revs{$_[1]} = _cb(@_) }); + if ($err) { + print "Checked through r$max\r"; + } if ($err && $max >= $head) { print STDERR "Path '$longest_path' ", "was probably deleted:\n", From 8841b37f2f5ce74359e150254dd138602eb418a7 Mon Sep 17 00:00:00 2001 From: Eric Wong Date: Wed, 11 Feb 2009 01:56:58 -0800 Subject: [PATCH 058/149] git-svn: fix broken symlink workaround when switching branches Thanks to Anton Gyllenberg for the bug report (and testcase in the following commit): > Commit dbc6c74d0858d77e61e092a48d467e725211f8e9 "git-svn: > handle empty files marked as symlinks in SVN" caused a > regression in an unusual case where a branch has been created > in SVN, later deleted and then created again from another > branch point and the original branch point had empty files not > in the new branch. In some cases git svn fetch will then fail > while trying to fetch the empty file from the wrong SVN > revision. Signed-off-by: Eric Wong --- git-svn.perl | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/git-svn.perl b/git-svn.perl index 9baf8221c3..001a1d8eff 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -2417,7 +2417,7 @@ sub find_parent_branch { # is not included with SVN 1.4.3 (the latest version # at the moment), so we can't rely on it $self->{last_commit} = $parent; - $ed = SVN::Git::Fetcher->new($self); + $ed = SVN::Git::Fetcher->new($self, $gs->{path}); $gs->ra->gs_do_switch($r0, $rev, $gs, $self->full_url, $ed) or die "SVN connection failed somewhere...\n"; @@ -3258,12 +3258,13 @@ use vars qw/$_ignore_regex/; # file baton members: path, mode_a, mode_b, pool, fh, blob, base sub new { - my ($class, $git_svn) = @_; + my ($class, $git_svn, $switch_path) = @_; my $self = SVN::Delta::Editor->new; bless $self, $class; if (exists $git_svn->{last_commit}) { $self->{c} = $git_svn->{last_commit}; - $self->{empty_symlinks} = _mark_empty_symlinks($git_svn); + $self->{empty_symlinks} = + _mark_empty_symlinks($git_svn, $switch_path); } $self->{empty} = {}; $self->{dir_prop} = {}; @@ -3278,7 +3279,7 @@ sub new { # not inside them (when the Git::SVN::Fetcher object is passed) to # do_{switch,update} sub _mark_empty_symlinks { - my ($git_svn) = @_; + my ($git_svn, $switch_path) = @_; my $bool = Git::config_bool('svn.brokenSymlinkWorkaround'); return {} if (defined($bool) && ! $bool); @@ -3294,7 +3295,7 @@ sub _mark_empty_symlinks { chomp(my $empty_blob = `git hash-object -t blob --stdin < /dev/null`); my ($ls, $ctx) = command_output_pipe(qw/ls-tree -r -z/, $cmt); local $/ = "\0"; - my $pfx = $git_svn->{path}; + my $pfx = defined($switch_path) ? $switch_path : $git_svn->{path}; $pfx .= '/' if length($pfx); while (<$ls>) { chomp; From 39111f6b7aeb5a7bc57731a6c8f0c3b8178873c8 Mon Sep 17 00:00:00 2001 From: Anton Gyllenberg Date: Wed, 11 Feb 2009 00:38:45 +0200 Subject: [PATCH 059/149] test case for regression caused by git-svn empty symlink fix Commit dbc6c74d0858d77e61e092a48d467e725211f8e9 "git-svn: handle empty files marked as symlinks in SVN" caused a regression in an unusual case where a branch has been created in SVN, later deleted and then created again from another branch point and the original branch point had empty files not in the new branch. In some cases git svn fetch will then fail while trying to fetch the empty file from the wrong SVN revision. This adds a test case that reproduces the issue. [ew: added additional test to ensure file was created correctly made test file executable ] Signed-off-by: Anton Gyllenberg Acked-by: Eric Wong --- t/t9135-git-svn-moved-branch-empty-file.sh | 16 ++ t/t9135/svn.dump | 192 +++++++++++++++++++++ 2 files changed, 208 insertions(+) create mode 100755 t/t9135-git-svn-moved-branch-empty-file.sh create mode 100644 t/t9135/svn.dump diff --git a/t/t9135-git-svn-moved-branch-empty-file.sh b/t/t9135-git-svn-moved-branch-empty-file.sh new file mode 100755 index 0000000000..03705fa4ce --- /dev/null +++ b/t/t9135-git-svn-moved-branch-empty-file.sh @@ -0,0 +1,16 @@ +#!/bin/sh + +test_description='test moved svn branch with missing empty files' + +. ./lib-git-svn.sh +test_expect_success 'load svn dumpfile' ' + svnadmin load "$rawsvnrepo" < "${TEST_DIRECTORY}/t9135/svn.dump" + ' + +test_expect_success 'clone using git svn' 'git svn clone -s "$svnrepo" x' + +test_expect_success 'test that b1 exists and is empty' ' + (cd x && test -f b1 && ! test -s b1) + ' + +test_done diff --git a/t/t9135/svn.dump b/t/t9135/svn.dump new file mode 100644 index 0000000000..b51c0ccceb --- /dev/null +++ b/t/t9135/svn.dump @@ -0,0 +1,192 @@ +SVN-fs-dump-format-version: 2 + +UUID: 1f80e919-e9e3-4d80-a3ae-d9f21095e27b + +Revision-number: 0 +Prop-content-length: 56 +Content-length: 56 + +K 8 +svn:date +V 27 +2009-02-10T19:23:16.424027Z +PROPS-END + +Revision-number: 1 +Prop-content-length: 123 +Content-length: 123 + +K 7 +svn:log +V 20 +init standard layout +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-10T19:23:17.195072Z +PROPS-END + +Node-path: branches +Node-kind: dir +Node-action: add +Prop-content-length: 10 +Content-length: 10 + +PROPS-END + + +Node-path: trunk +Node-kind: dir +Node-action: add +Prop-content-length: 10 +Content-length: 10 + +PROPS-END + + +Revision-number: 2 +Prop-content-length: 121 +Content-length: 121 + +K 7 +svn:log +V 18 +branch-b off trunk +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-10T19:23:19.160095Z +PROPS-END + +Node-path: branches/branch-b +Node-kind: dir +Node-action: add +Node-copyfrom-rev: 1 +Node-copyfrom-path: trunk +Prop-content-length: 34 +Content-length: 34 + +K 13 +svn:mergeinfo +V 0 + +PROPS-END + + +Revision-number: 3 +Prop-content-length: 120 +Content-length: 120 + +K 7 +svn:log +V 17 +add empty file b1 +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-10T19:23:20.194568Z +PROPS-END + +Node-path: branches/branch-b/b1 +Node-kind: file +Node-action: add +Prop-content-length: 10 +Text-content-length: 0 +Text-content-md5: d41d8cd98f00b204e9800998ecf8427e +Content-length: 10 + +PROPS-END + + +Revision-number: 4 +Prop-content-length: 110 +Content-length: 110 + +K 7 +svn:log +V 8 +branch-c +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-10T19:23:21.169100Z +PROPS-END + +Node-path: branches/branch-c +Node-kind: dir +Node-action: add +Node-copyfrom-rev: 3 +Node-copyfrom-path: trunk + + +Revision-number: 5 +Prop-content-length: 126 +Content-length: 126 + +K 7 +svn:log +V 23 +oops, wrong branchpoint +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-10T19:23:21.253557Z +PROPS-END + +Node-path: branches/branch-c +Node-action: delete + + +Revision-number: 6 +Prop-content-length: 127 +Content-length: 127 + +K 7 +svn:log +V 24 +branch-c off of branch-b +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-10T19:23:21.314659Z +PROPS-END + +Node-path: branches/branch-c +Node-kind: dir +Node-action: add +Node-copyfrom-rev: 5 +Node-copyfrom-path: branches/branch-b +Prop-content-length: 34 +Content-length: 34 + +K 13 +svn:mergeinfo +V 0 + +PROPS-END + + From 9e5b80cd87a511f3403b6f88f87ef40844695f6b Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Wed, 11 Feb 2009 09:22:16 -0800 Subject: [PATCH 060/149] Squelch overzealous "ignoring dangling symref" in an empty repository 057e713 (Warn use of "origin" when remotes/origin/HEAD is dangling, 2009-02-08) tried to warn dangling refs/remotes/origin/HEAD only when "origin" was used to refer to it. There was one corner case a symref is expected to be dangling and this warning is unwarranted: HEAD in an empty repository. This squelches the warning for this special case. Signed-off-by: Junio C Hamano --- sha1_name.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sha1_name.c b/sha1_name.c index 3bd2ef0e7c..2f75179f4c 100644 --- a/sha1_name.c +++ b/sha1_name.c @@ -278,7 +278,8 @@ int dwim_ref(const char *str, int len, unsigned char *sha1, char **ref) *ref = xstrdup(r); if (!warn_ambiguous_refs) break; - } else if (flag & REF_ISSYMREF) + } else if ((flag & REF_ISSYMREF) && + (len != 4 || strcmp(str, "HEAD"))) warning("ignoring dangling symref %s.", fullref); } free(last_branch); From fa3a0c94dc88567b513e58835e5915f87da40af9 Mon Sep 17 00:00:00 2001 From: "Shawn O. Pearce" Date: Wed, 11 Feb 2009 10:15:30 -0800 Subject: [PATCH 061/149] Clear the delta base cache if a pack is rebuilt There is some risk that re-opening a regenerated pack file with different offsets could leave stale entries within the delta base cache that could be matched up against other objects using the same "struct packed_git*" and pack offset. Throwing away the entire delta base cache in this case is safer, as we don't have to worry about a recycled "struct packed_git*" matching to the wrong base object, resulting in delta apply errors while unpacking an object. Suggested-by: Daniel Barkalow Signed-off-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- sha1_file.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sha1_file.c b/sha1_file.c index cbcae24d28..bea958ec81 100644 --- a/sha1_file.c +++ b/sha1_file.c @@ -676,6 +676,7 @@ void free_pack_by_name(const char *pack_name) while (*pp) { p = *pp; if (strcmp(pack_name, p->pack_name) == 0) { + clear_delta_base_cache(); close_pack_windows(p); if (p->pack_fd != -1) close(p->pack_fd); From e5f5050ed1481c3bc27658f625a87155aed0984f Mon Sep 17 00:00:00 2001 From: Pat Notz Date: Tue, 10 Feb 2009 09:43:30 -0700 Subject: [PATCH 062/149] Fix contrib/hooks/post-receive-email for new duplicate branch In the show_new_revisions function, the original code: git rev-parse --not --branches | grep -v $(git rev-parse $refname) | isn't quite right since one can create a new branch and push it without any new commits. In that case, two refs will have the same sha1 but both would get filtered by the 'grep'. In the end, we'll show ALL the history which is not what we want. Instead, we should list the branches by name and remove the branch being updated and THEN pass that list through rev-parse. Revised as suggested by Jakub Narebski and Junio C Hamano to use git-for-each-ref instead of git-branch. (Thanks!) Signed-off-by: Pat Notz Signed-off-by: Junio C Hamano --- contrib/hooks/post-receive-email | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/contrib/hooks/post-receive-email b/contrib/hooks/post-receive-email index 28a3c0e46e..60cbab65d3 100644 --- a/contrib/hooks/post-receive-email +++ b/contrib/hooks/post-receive-email @@ -615,7 +615,9 @@ show_new_revisions() revspec=$oldrev..$newrev fi - git rev-parse --not --branches | grep -v $(git rev-parse $refname) | + other_branches=$(git for-each-ref --format='%(refname)' refs/heads/ | + grep -F -v $refname) + git rev-parse --not $other_branches | if [ -z "$custom_showrev" ] then git rev-list --pretty --stdin $revspec From 0ea29cce4d099d2fa6613ec66c080776cfe869d5 Mon Sep 17 00:00:00 2001 From: Eric Kidd Date: Wed, 11 Feb 2009 16:10:41 -0500 Subject: [PATCH 063/149] filter-branch: Add more error-handling 9273b56 (filter-branch: Fix fatal error on bare repositories, 2009-02-03) fixed a missing check of return status from an underlying command in git-filter-branch, but there still are places that do not check errors. For example, the command does not pay attention to the exit status of the command given by --commit-filter. It should abort in such a case. This attempts to fix all the remaining places that fails to checks errors. In two places, I've had to break apart pipelines in order to check the error code for the first stage of the pipeline, as discussed here: http://kerneltrap.org/mailarchive/git/2009/1/28/4835614 Feedback on this patch was provided by Johannes Sixt, Johannes Schindelin and Junio C Hamano. Thomas Rast helped with pipeline error handling. Signed-off-by: Eric Kidd Signed-off-by: Junio C Hamano --- git-filter-branch.sh | 26 ++++++++++++++------------ t/t7003-filter-branch.sh | 4 ++++ 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/git-filter-branch.sh b/git-filter-branch.sh index 86eef56297..27b57b826a 100755 --- a/git-filter-branch.sh +++ b/git-filter-branch.sh @@ -221,7 +221,7 @@ die "" trap 'cd ../..; rm -rf "$tempdir"' 0 # Make sure refs/original is empty -git for-each-ref > "$tempdir"/backup-refs +git for-each-ref > "$tempdir"/backup-refs || exit while read sha1 type name do case "$force,$name" in @@ -241,8 +241,9 @@ GIT_WORK_TREE=. export GIT_DIR GIT_WORK_TREE # The refs should be updated if their heads were rewritten -git rev-parse --no-flags --revs-only --symbolic-full-name --default HEAD "$@" | -sed -e '/^^/d' >"$tempdir"/heads +git rev-parse --no-flags --revs-only --symbolic-full-name \ + --default HEAD "$@" > "$tempdir"/raw-heads || exit +sed -e '/^^/d' "$tempdir"/raw-heads >"$tempdir"/heads test -s "$tempdir"/heads || die "Which ref do you want to rewrite?" @@ -251,8 +252,6 @@ GIT_INDEX_FILE="$(pwd)/../index" export GIT_INDEX_FILE git read-tree || die "Could not seed the index" -ret=0 - # map old->new commit ids for rewriting parents mkdir ../map || die "Could not create map/ directory" @@ -315,10 +314,11 @@ while read commit parents; do die "tree filter failed: $filter_tree" ( - git diff-index -r --name-only $commit + git diff-index -r --name-only $commit && git ls-files --others - ) | - git update-index --add --replace --remove --stdin + ) > "$tempdir"/tree-state || exit + git update-index --add --replace --remove --stdin \ + < "$tempdir"/tree-state || exit fi eval "$filter_index" < /dev/null || @@ -339,7 +339,8 @@ while read commit parents; do eval "$filter_msg" > ../message || die "msg filter failed: $filter_msg" @SHELL_PATH@ -c "$filter_commit" "git commit-tree" \ - $(git write-tree) $parentstr < ../message > ../map/$commit + $(git write-tree) $parentstr < ../message > ../map/$commit || + die "could not write rewritten commit" done <../revs # In case of a subdirectory filter, it is possible that a specified head @@ -407,7 +408,8 @@ do die "Could not rewrite $ref" ;; esac - git update-ref -m "filter-branch: backup" "$orig_namespace$ref" $sha1 + git update-ref -m "filter-branch: backup" "$orig_namespace$ref" $sha1 || + exit done < "$tempdir"/heads # TODO: This should possibly go, with the semantics that all positive given @@ -483,7 +485,7 @@ test -z "$ORIG_GIT_INDEX_FILE" || { } if [ "$(is_bare_repository)" = false ]; then - git read-tree -u -m HEAD + git read-tree -u -m HEAD || exit fi -exit $ret +exit 0 diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index cb0474336d..56b5eccdb4 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -48,6 +48,10 @@ test_expect_success 'result is really identical' ' test $H = $(git rev-parse HEAD) ' +test_expect_success 'Fail if commit filter fails' ' + test_must_fail git filter-branch -f --commit-filter "exit 1" HEAD +' + test_expect_success 'rewrite, renaming a specific file' ' git filter-branch -f --tree-filter "mv d doh || :" HEAD ' From 784f8affe4dfc8ceec93803d6c22b4b8467a4642 Mon Sep 17 00:00:00 2001 From: Elijah Newren Date: Tue, 10 Feb 2009 23:03:53 -0700 Subject: [PATCH 064/149] fast-export: ensure we traverse commits in topological order fast-export will only list as parents those commits which have already been traversed (making it appear as if merges have been squashed if not all parents have been traversed). To avoid this silent squashing of merge commits, we request commits in topological order. Signed-off-by: Elijah Newren Acked-by: Johannes Schindelin Signed-off-by: Junio C Hamano --- builtin-fast-export.c | 1 + 1 file changed, 1 insertion(+) diff --git a/builtin-fast-export.c b/builtin-fast-export.c index 838633808c..cdb7df5efe 100644 --- a/builtin-fast-export.c +++ b/builtin-fast-export.c @@ -511,6 +511,7 @@ int cmd_fast_export(int argc, const char **argv, const char *prefix) get_tags_and_duplicates(&revs.pending, &extra_refs); + revs.topo_order = 1; if (prepare_revision_walk(&revs)) die("revision walk setup failed"); revs.diffopt.format_callback = show_filemodify; From 3e6b1d0abcd58f0b2b106212ce0a0e07a6de342f Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Tue, 10 Feb 2009 12:16:31 -0800 Subject: [PATCH 065/149] Make repack less likely to corrupt repository Some platforms refuse to rename a file that is open. When repacking an already packed repository without adding any new object, the resulting pack will contain the same set of objects as an existing pack, and on such platforms, a newly created packfile cannot replace the existing one. The logic detected this issue but did not try hard enough to recover from it. Especially because the files that needs renaming come in pairs, there potentially are different failure modes that one can be renamed but the others cannot. Asking manual recovery to end users were error prone. This patch tries to make it more robust by first making sure all the existing files that need to be renamed have been renamed before continuing, and attempts to roll back if some failed to rename. This is based on an initial patch by Robin Rosenberg. Signed-off-by: Junio C Hamano --- git-repack.sh | 87 +++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 67 insertions(+), 20 deletions(-) diff --git a/git-repack.sh b/git-repack.sh index 458a497af8..be6db5e805 100755 --- a/git-repack.sh +++ b/git-repack.sh @@ -88,32 +88,79 @@ if [ -z "$names" ]; then echo Nothing new to pack. fi fi -for name in $names ; do + +# Ok we have prepared all new packfiles. +mkdir -p "$PACKDIR" || exit + +# First see if there are packs of the same name and if so +# if we can move them out of the way (this can happen if we +# repacked immediately after packing fully. +rollback= +failed= +for name in $names +do + for sfx in pack idx + do + file=pack-$name.$sfx + test -f "$PACKDIR/$file" || continue + rm -f "$PACKDIR/old-$file" && + mv "$PACKDIR/$file" "$PACKDIR/old-$file" || { + failed=t + break + } + rollback="$rollback $file" + done + test -z "$failed" || break +done + +# If renaming failed for any of them, roll the ones we have +# already renamed back to their original names. +if test -n "$failed" +then + rollback_failure= + for file in $rollback + do + mv "$PACKDIR/old-$file" "$PACKDIR/$file" || + rollback_failure="$rollback_failure $file" + done + if test -n "$rollback_failure" + then + echo >&2 "WARNING: Some packs in use have been renamed by" + echo >&2 "WARNING: prefixing old- to their name, in order to" + echo >&2 "WARNING: replace them with the new version of the" + echo >&2 "WARNING: file. But the operation failed, and" + echo >&2 "WARNING: attempt to rename them back to their" + echo >&2 "WARNING: original names also failed." + echo >&2 "WARNING: Please rename them in $PACKDIR manually:" + for file in $rollback_failure + do + echo >&2 "WARNING: old-$file -> $file" + done + fi + exit 1 +fi + +# Now the ones with the same name are out of the way... +fullbases= +for name in $names +do fullbases="$fullbases pack-$name" chmod a-w "$PACKTMP-$name.pack" chmod a-w "$PACKTMP-$name.idx" - mkdir -p "$PACKDIR" || exit - - for sfx in pack idx - do - if test -f "$PACKDIR/pack-$name.$sfx" - then - mv -f "$PACKDIR/pack-$name.$sfx" \ - "$PACKDIR/old-pack-$name.$sfx" - fi - done && mv -f "$PACKTMP-$name.pack" "$PACKDIR/pack-$name.pack" && - mv -f "$PACKTMP-$name.idx" "$PACKDIR/pack-$name.idx" && - test -f "$PACKDIR/pack-$name.pack" && - test -f "$PACKDIR/pack-$name.idx" || { - echo >&2 "Couldn't replace the existing pack with updated one." - echo >&2 "The original set of packs have been saved as" - echo >&2 "old-pack-$name.{pack,idx} in $PACKDIR." - exit 1 - } - rm -f "$PACKDIR/old-pack-$name.pack" "$PACKDIR/old-pack-$name.idx" + mv -f "$PACKTMP-$name.idx" "$PACKDIR/pack-$name.idx" || + exit done +# Remove the "old-" files +for name in $names +do + rm -f "$PACKDIR/old-pack-$name.idx" + rm -f "$PACKDIR/old-pack-$name.pack" +done + +# End of pack replacement. + if test "$remove_redundant" = t then # We know $existing are all redundant. From e5887c1bda12b31ea7af0ce798bfdee308e1b176 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Wed, 11 Feb 2009 18:44:03 -0800 Subject: [PATCH 066/149] Prepare for 1.6.1.4. Signed-off-by: Junio C Hamano --- Documentation/RelNotes-1.6.1.4.txt | 19 +++++++++++++++++++ RelNotes | 2 +- 2 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 Documentation/RelNotes-1.6.1.4.txt diff --git a/Documentation/RelNotes-1.6.1.4.txt b/Documentation/RelNotes-1.6.1.4.txt new file mode 100644 index 0000000000..a9f1a6b8b5 --- /dev/null +++ b/Documentation/RelNotes-1.6.1.4.txt @@ -0,0 +1,19 @@ +GIT v1.6.1.4 Release Notes +========================== + +Fixes since v1.6.1.3 +-------------------- + +* "git fast-export" produced wrong output with some parents missing from + commits, when the history is clock-skewed. + +* "git fast-import" sometimes failed to read back objects it just wrote + out and aborted, because it failed to flush stale cached data. + +* "git repack" did not error out when necessary object was missing in the + repository. + +Also includes minor documentation fixes and updates. + +-- +git shortlog --no-merges v1.6.1.3.. diff --git a/RelNotes b/RelNotes index 0a61bcd11b..56936add35 120000 --- a/RelNotes +++ b/RelNotes @@ -1 +1 @@ -Documentation/RelNotes-1.6.1.3.txt \ No newline at end of file +Documentation/RelNotes-1.6.1.4.txt \ No newline at end of file From a8344abe0f70f9fc629ee055d73ffa65fbc58311 Mon Sep 17 00:00:00 2001 From: Nazri Ramliy Date: Thu, 12 Feb 2009 21:36:14 +0800 Subject: [PATCH 067/149] Bugfix: GIT_EXTERNAL_DIFF with more than one changed files When there is more than one file that are changed, running git diff with GIT_EXTERNAL_DIFF incorrectly diagnoses an programming error and dies. The check introduced in 479b0ae (diff: refactor tempfile cleanup handling, 2009-01-22) to detect a temporary file slot that forgot to remove its temporary file was inconsistent with the way the codepath to remove the temporary to mark the slot that it is done with it. This patch fixes this problem and adds a test case for it. Signed-off-by: Nazri Ramliy Acked-by: Jeff King Signed-off-by: Junio C Hamano --- diff.c | 8 ++++---- t/t4020-diff-external.sh | 8 ++++++++ 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/diff.c b/diff.c index a5a540fd38..be3859e0a7 100644 --- a/diff.c +++ b/diff.c @@ -184,11 +184,11 @@ static int remove_tempfile_installed; static void remove_tempfile(void) { int i; - for (i = 0; i < ARRAY_SIZE(diff_temp); i++) - if (diff_temp[i].name == diff_temp[i].tmp_path) { + for (i = 0; i < ARRAY_SIZE(diff_temp); i++) { + if (diff_temp[i].name == diff_temp[i].tmp_path) unlink(diff_temp[i].name); - diff_temp[i].name = NULL; - } + diff_temp[i].name = NULL; + } } static void remove_tempfile_on_signal(int signo) diff --git a/t/t4020-diff-external.sh b/t/t4020-diff-external.sh index caea292f15..281680d95a 100755 --- a/t/t4020-diff-external.sh +++ b/t/t4020-diff-external.sh @@ -128,4 +128,12 @@ test_expect_success 'force diff with "diff"' ' test_cmp "$TEST_DIRECTORY"/t4020/diff.NUL actual ' +test_expect_success 'GIT_EXTERNAL_DIFF with more than one changed files' ' + echo anotherfile > file2 && + git add file2 && + git commit -m "added 2nd file" && + echo modified >file2 && + GIT_EXTERNAL_DIFF=echo git diff +' + test_done From 222b1673860bba6c75895ce3e2d1467fb878fa2a Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Thu, 12 Feb 2009 13:02:09 -0800 Subject: [PATCH 068/149] Revert "validate_headref: tighten ref-matching to just branches" This reverts commit b229d18a809c169314b7f0d048dc5a7632e8f916, at least until we figure out how to work better with TopGit that points HEAD to refs/top-bases/ hierarchy. --- path.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/path.c b/path.c index dd22370e8e..4b9107fed1 100644 --- a/path.c +++ b/path.c @@ -154,7 +154,7 @@ int validate_headref(const char *path) /* Make sure it is a "refs/.." symlink */ if (S_ISLNK(st.st_mode)) { len = readlink(path, buffer, sizeof(buffer)-1); - if (len >= 11 && !memcmp("refs/heads/", buffer, 11)) + if (len >= 5 && !memcmp("refs/", buffer, 5)) return 0; return -1; } @@ -178,7 +178,7 @@ int validate_headref(const char *path) len -= 4; while (len && isspace(*buf)) buf++, len--; - if (len >= 11 && !memcmp("refs/heads/", buf, 11)) + if (len >= 5 && !memcmp("refs/", buf, 5)) return 0; } From 49bde7533681f5e4a80402af465bd7a28556266e Mon Sep 17 00:00:00 2001 From: Jacob Helwig Date: Thu, 12 Feb 2009 10:01:10 -0800 Subject: [PATCH 069/149] Add 'rm -f' equivalent to 'git rm' example of filter-branch --index-filter Signed-off-by: Jacob Helwig Signed-off-by: Junio C Hamano --- Documentation/git-filter-branch.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 451950bab6..1fbbbb4025 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -212,6 +212,11 @@ git filter-branch --index-filter 'git rm --cached filename' HEAD Now, you will get the rewritten history saved in HEAD. +As with using `rm filename`, `git rm --cached filename` will fail +if the file is absent from the tree of a commit. If it is not important +whether the file is already absent from the tree, you can use +`git rm --cached --ignore-unmatch filename` instead. + To rewrite the repository to look as if `foodir/` had been its project root, and discard all other history: From 7fe5438516a8121bd67ee0789cb0960b6e922225 Mon Sep 17 00:00:00 2001 From: Mark Burton Date: Thu, 12 Feb 2009 10:21:19 +0000 Subject: [PATCH 070/149] git-rebase.txt: --interactive does not work with --whitespace Signed-off-by: Mark Burton Signed-off-by: Junio C Hamano --- Documentation/git-rebase.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 3d6d429e5e..30487de48f 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -246,6 +246,7 @@ OPTIONS --whitespace=:: This flag is passed to the 'git-apply' program (see linkgit:git-apply[1]) that applies the patch. + Incompatible with the --interactive option. -i:: --interactive:: From 1a526d483865d85aca3a10c650e85c44ad1f001b Mon Sep 17 00:00:00 2001 From: Jeremy White Date: Thu, 12 Feb 2009 15:17:04 -0600 Subject: [PATCH 071/149] Update documentation to add further information about using Thunderbird with git-imap-send. Signed-off-by: Jeremy White Signed-off-by: Junio C Hamano --- Documentation/SubmittingPatches | 27 +++++++++++++++++++++++++++ Documentation/git-imap-send.txt | 14 ++++++++++++++ 2 files changed, 41 insertions(+) diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index ba07c8c571..9b559adefc 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -376,9 +376,36 @@ Thunderbird (A Large Angry SCM) +By default, Thunderbird will both wrap emails as well as flag them as +being 'format=flowed', both of which will make the resulting email unusable +by git. + Here are some hints on how to successfully submit patches inline using Thunderbird. +There are two different approaches. One approach is to configure +Thunderbird to not mangle patches. The second approach is to use +an external editor to keep Thunderbird from mangling the patches. + +Approach #1 (configuration): + +This recipe is current as of Thunderbird 2.0.0.19. Three steps: + 1. Configure your mail server composition as plain text + Edit...Account Settings...Composition & Addressing, + uncheck 'Compose Messages in HTML'. + 2. Configure your general composition window to not wrap + Edit..Preferences..Composition, wrap plain text messages at 0 + 3. Disable the use of format=flowed + Edit..Preferences..Advanced..Config Editor. Search for: + mailnews.send_plaintext_flowed + toggle it to make sure it is set to 'false'. + +After that is done, you should be able to compose email as you +otherwise would (cut + paste, git-format-patch | git-imap-send, etc), +and the patches should not be mangled. + +Approach #2 (external editor): + This recipe appears to work with the current [*1*] Thunderbird from Suse. The following Thunderbird extensions are needed: diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index bd49a0aee8..1685f04efe 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -98,6 +98,20 @@ Using direct mode with SSL: .......................... +CAUTION +------- +It is still your responsibility to make sure that the email message +sent by your email program meets the standards of your project. +Many projects do not like patches to be attached. Some mail +agents will transform patches (e.g. wrap lines, send them as +format=flowed) in ways that make them fail. You will get angry +flames ridiculing you if you don't check this. + +Thunderbird in particular is known to be problematic. Thunderbird +users may wish to visit this web page for more information: + http://kb.mozillazine.org/Plain_text_e-mail_-_Thunderbird#Completely_plain_email + + BUGS ---- Doesn't handle lines starting with "From " in the message body. From 5cd12b85fe8ff74f202a158511ead34e8aba584c Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Wed, 11 Feb 2009 22:42:27 -0800 Subject: [PATCH 072/149] Install the default "master" branch configuration after cloning a void After "cloning from an empty repository", we have a configuration to describe the remote's URL and the default ref mappings, but we lack the branch configuration for the default branch we create on our end, "master". It is likely that the empty repository we cloned from will point the default "master" branch with its HEAD, so prepare the local configuration to match. Signed-off-by: Junio C Hamano --- builtin-clone.c | 23 ++++++++++++++++++----- t/t5601-clone.sh | 15 +++++++++++++++ 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/builtin-clone.c b/builtin-clone.c index f73029e2ba..c338910b1c 100644 --- a/builtin-clone.c +++ b/builtin-clone.c @@ -350,6 +350,19 @@ static struct ref *write_remote_refs(const struct ref *refs, return local_refs; } +static void install_branch_config(const char *local, + const char *origin, + const char *remote) +{ + struct strbuf key = STRBUF_INIT; + strbuf_addf(&key, "branch.%s.remote", local); + git_config_set(key.buf, origin); + strbuf_reset(&key); + strbuf_addf(&key, "branch.%s.merge", local); + git_config_set(key.buf, remote); + strbuf_release(&key); +} + int cmd_clone(int argc, const char **argv, const char *prefix) { int use_local_hardlinks = 1; @@ -539,6 +552,9 @@ int cmd_clone(int argc, const char **argv, const char *prefix) head_points_at = NULL; remote_head = NULL; option_no_checkout = 1; + if (!option_bare) + install_branch_config("master", option_origin, + "refs/heads/master"); } if (head_points_at) { @@ -567,11 +583,8 @@ int cmd_clone(int argc, const char **argv, const char *prefix) head_points_at->peer_ref->name, reflog_msg.buf); - strbuf_addf(&key, "branch.%s.remote", head); - git_config_set(key.buf, option_origin); - strbuf_reset(&key); - strbuf_addf(&key, "branch.%s.merge", head); - git_config_set(key.buf, head_points_at->name); + install_branch_config(head, option_origin, + head_points_at->name); } } else if (remote_head) { /* Source had detached HEAD pointing somewhere. */ diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index fe287d31fb..44793f2eee 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -144,4 +144,19 @@ test_expect_success 'clone to an existing path' ' test_must_fail git clone src target-5 ' +test_expect_success 'clone a void' ' + mkdir src-0 && + ( + cd src-0 && git init + ) && + git clone src-0 target-6 && + ( + cd src-0 && test_commit A + ) && + git clone src-0 target-7 && + # There is no reason to insist they are bit-for-bit + # identical, but this test should suffice for now. + test_cmp target-6/.git/config target-7/.git/config +' + test_done From 901d615c5d74bea20e0c8d7fcdf7585616306b79 Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Thu, 12 Feb 2009 07:55:54 -0800 Subject: [PATCH 073/149] bash-completion: Complete the values of color.interactive, color.ui, color.pager Signed-off-by: Matt Kraai Acked-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- contrib/completion/git-completion.bash | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index f44f63cfeb..a7a10c0d79 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1196,10 +1196,14 @@ _git_config () __gitcomp "$(__git_merge_strategies)" return ;; - color.branch|color.diff|color.status) + color.branch|color.diff|color.interactive|color.status|color.ui) __gitcomp "always never auto" return ;; + color.pager) + __gitcomp "false true" + return + ;; color.*.*) __gitcomp " normal black red green yellow blue magenta cyan white From 7fcda9201e192413c2e63fe35ce6664dbc81705d Mon Sep 17 00:00:00 2001 From: Thomas Rast Date: Fri, 13 Feb 2009 23:10:41 +0100 Subject: [PATCH 074/149] log: do not print ellipses with --abbrev-commit 'git log --abbrev-commit' added an ellipsis to all commit names that were abbreviated. This was particularly annoying if you wanted to cut&paste the sha1 from the terminal, since selecting by word would pick up '...' too. So use find_unique_abbrev() instead of diff_unique_abbrev() in all log-related commit sha1 printing routines, and also change the formatting of the 'Merge: parent1 parent2' line output via pretty_print_commit(). Signed-off-by: Thomas Rast Signed-off-by: Junio C Hamano --- log-tree.c | 8 ++++---- pretty.c | 4 +--- .../diff.log_--patch-with-stat_--summary_master_--_dir_ | 2 +- t/t4013/diff.log_--patch-with-stat_master | 2 +- t/t4013/diff.log_--patch-with-stat_master_--_dir_ | 2 +- ...iff.log_--root_--cc_--patch-with-stat_--summary_master | 2 +- .../diff.log_--root_--patch-with-stat_--summary_master | 2 +- t/t4013/diff.log_--root_--patch-with-stat_master | 2 +- .../diff.log_--root_-c_--patch-with-stat_--summary_master | 2 +- t/t4013/diff.log_--root_-p_master | 2 +- t/t4013/diff.log_--root_master | 2 +- t/t4013/diff.log_-p_master | 2 +- t/t4013/diff.log_master | 2 +- t/t4013/diff.show_master | 2 +- ...changed_--root_--cc_--patch-with-stat_--summary_master | 2 +- ...atchanged_--root_-c_--patch-with-stat_--summary_master | 2 +- 16 files changed, 19 insertions(+), 21 deletions(-) diff --git a/log-tree.c b/log-tree.c index 194ddb13da..84a74e544b 100644 --- a/log-tree.c +++ b/log-tree.c @@ -48,7 +48,7 @@ static void show_parents(struct commit *commit, int abbrev) struct commit_list *p; for (p = commit->parents; p ; p = p->next) { struct commit *parent = p->item; - printf(" %s", diff_unique_abbrev(parent->object.sha1, abbrev)); + printf(" %s", find_unique_abbrev(parent->object.sha1, abbrev)); } } @@ -280,7 +280,7 @@ void show_log(struct rev_info *opt) putchar('>'); } } - fputs(diff_unique_abbrev(commit->object.sha1, abbrev_commit), stdout); + fputs(find_unique_abbrev(commit->object.sha1, abbrev_commit), stdout); if (opt->print_parents) show_parents(commit, abbrev_commit); show_decorations(opt, commit); @@ -348,13 +348,13 @@ void show_log(struct rev_info *opt) putchar('>'); } } - fputs(diff_unique_abbrev(commit->object.sha1, abbrev_commit), + fputs(find_unique_abbrev(commit->object.sha1, abbrev_commit), stdout); if (opt->print_parents) show_parents(commit, abbrev_commit); if (parent) printf(" (from %s)", - diff_unique_abbrev(parent->object.sha1, + find_unique_abbrev(parent->object.sha1, abbrev_commit)); show_decorations(opt, commit); printf("%s", diff_get_color_opt(&opt->diffopt, DIFF_RESET)); diff --git a/pretty.c b/pretty.c index cc460b5697..428fbb61a3 100644 --- a/pretty.c +++ b/pretty.c @@ -210,15 +210,13 @@ static void add_merge_info(enum cmit_fmt fmt, struct strbuf *sb, while (parent) { struct commit *p = parent->item; const char *hex = NULL; - const char *dots; if (abbrev) hex = find_unique_abbrev(p->object.sha1, abbrev); if (!hex) hex = sha1_to_hex(p->object.sha1); - dots = (abbrev && strlen(hex) != 40) ? "..." : ""; parent = parent->next; - strbuf_addf(sb, " %s%s", hex, dots); + strbuf_addf(sb, " %s", hex); } strbuf_addch(sb, '\n'); } diff --git a/t/t4013/diff.log_--patch-with-stat_--summary_master_--_dir_ b/t/t4013/diff.log_--patch-with-stat_--summary_master_--_dir_ index 3ceb8e73c5..bd7f5c0f70 100644 --- a/t/t4013/diff.log_--patch-with-stat_--summary_master_--_dir_ +++ b/t/t4013/diff.log_--patch-with-stat_--summary_master_--_dir_ @@ -1,6 +1,6 @@ $ git log --patch-with-stat --summary master -- dir/ commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--patch-with-stat_master b/t/t4013/diff.log_--patch-with-stat_master index 43d77761f9..14595a614c 100644 --- a/t/t4013/diff.log_--patch-with-stat_master +++ b/t/t4013/diff.log_--patch-with-stat_master @@ -1,6 +1,6 @@ $ git log --patch-with-stat master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--patch-with-stat_master_--_dir_ b/t/t4013/diff.log_--patch-with-stat_master_--_dir_ index 5187a26816..5a4e72765d 100644 --- a/t/t4013/diff.log_--patch-with-stat_master_--_dir_ +++ b/t/t4013/diff.log_--patch-with-stat_master_--_dir_ @@ -1,6 +1,6 @@ $ git log --patch-with-stat master -- dir/ commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--root_--cc_--patch-with-stat_--summary_master b/t/t4013/diff.log_--root_--cc_--patch-with-stat_--summary_master index c9640976a8..df0aaa9f2c 100644 --- a/t/t4013/diff.log_--root_--cc_--patch-with-stat_--summary_master +++ b/t/t4013/diff.log_--root_--cc_--patch-with-stat_--summary_master @@ -1,6 +1,6 @@ $ git log --root --cc --patch-with-stat --summary master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--root_--patch-with-stat_--summary_master b/t/t4013/diff.log_--root_--patch-with-stat_--summary_master index ad050af55f..c11b5f2c7f 100644 --- a/t/t4013/diff.log_--root_--patch-with-stat_--summary_master +++ b/t/t4013/diff.log_--root_--patch-with-stat_--summary_master @@ -1,6 +1,6 @@ $ git log --root --patch-with-stat --summary master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--root_--patch-with-stat_master b/t/t4013/diff.log_--root_--patch-with-stat_master index 628c6c03bc..5f0c98f9ce 100644 --- a/t/t4013/diff.log_--root_--patch-with-stat_master +++ b/t/t4013/diff.log_--root_--patch-with-stat_master @@ -1,6 +1,6 @@ $ git log --root --patch-with-stat master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--root_-c_--patch-with-stat_--summary_master b/t/t4013/diff.log_--root_-c_--patch-with-stat_--summary_master index 5d4e0f13b5..e62c368dc6 100644 --- a/t/t4013/diff.log_--root_-c_--patch-with-stat_--summary_master +++ b/t/t4013/diff.log_--root_-c_--patch-with-stat_--summary_master @@ -1,6 +1,6 @@ $ git log --root -c --patch-with-stat --summary master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--root_-p_master b/t/t4013/diff.log_--root_-p_master index 217a2eb203..b42c334439 100644 --- a/t/t4013/diff.log_--root_-p_master +++ b/t/t4013/diff.log_--root_-p_master @@ -1,6 +1,6 @@ $ git log --root -p master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--root_master b/t/t4013/diff.log_--root_master index e17ccfc234..e8f46159da 100644 --- a/t/t4013/diff.log_--root_master +++ b/t/t4013/diff.log_--root_master @@ -1,6 +1,6 @@ $ git log --root master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_-p_master b/t/t4013/diff.log_-p_master index f8fefef2c3..bf1326dc36 100644 --- a/t/t4013/diff.log_-p_master +++ b/t/t4013/diff.log_-p_master @@ -1,6 +1,6 @@ $ git log -p master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_master b/t/t4013/diff.log_master index e9d9e7b40a..a8f6ce5abd 100644 --- a/t/t4013/diff.log_master +++ b/t/t4013/diff.log_master @@ -1,6 +1,6 @@ $ git log master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.show_master b/t/t4013/diff.show_master index 9e6e1f2710..fb08ce0e46 100644 --- a/t/t4013/diff.show_master +++ b/t/t4013/diff.show_master @@ -1,6 +1,6 @@ $ git show master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.whatchanged_--root_--cc_--patch-with-stat_--summary_master b/t/t4013/diff.whatchanged_--root_--cc_--patch-with-stat_--summary_master index 5facf2543d..e96ff1fb8c 100644 --- a/t/t4013/diff.whatchanged_--root_--cc_--patch-with-stat_--summary_master +++ b/t/t4013/diff.whatchanged_--root_--cc_--patch-with-stat_--summary_master @@ -1,6 +1,6 @@ $ git whatchanged --root --cc --patch-with-stat --summary master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.whatchanged_--root_-c_--patch-with-stat_--summary_master b/t/t4013/diff.whatchanged_--root_-c_--patch-with-stat_--summary_master index 10f6767e49..c0aff68ef6 100644 --- a/t/t4013/diff.whatchanged_--root_-c_--patch-with-stat_--summary_master +++ b/t/t4013/diff.whatchanged_--root_-c_--patch-with-stat_--summary_master @@ -1,6 +1,6 @@ $ git whatchanged --root -c --patch-with-stat --summary master commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 -Merge: 9a6d494... c7a2ab9... +Merge: 9a6d494 c7a2ab9 Author: A U Thor Date: Mon Jun 26 00:04:00 2006 +0000 From 4b15b4ab5f9b19caff6d4a910ecc3e1d4f0e13f0 Mon Sep 17 00:00:00 2001 From: Keith Cascio Date: Fri, 13 Feb 2009 09:33:34 -0800 Subject: [PATCH 075/149] Remove redundant bit clears from diff_setup() All bits already clear after memset(0). Signed-off-by: Junio C Hamano --- diff.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/diff.c b/diff.c index be3859e0a7..006aa017e2 100644 --- a/diff.c +++ b/diff.c @@ -2326,15 +2326,12 @@ void diff_setup(struct diff_options *options) options->break_opt = -1; options->rename_limit = -1; options->dirstat_percent = 3; - DIFF_OPT_CLR(options, DIRSTAT_CUMULATIVE); options->context = 3; options->change = diff_change; options->add_remove = diff_addremove; if (diff_use_color_default > 0) DIFF_OPT_SET(options, COLOR_DIFF); - else - DIFF_OPT_CLR(options, COLOR_DIFF); options->detect_rename = diff_detect_rename_default; if (!diff_mnemonic_prefix) { From e9cc02f0e41fd5d2f51e3c3f2b4f8cfa9e434432 Mon Sep 17 00:00:00 2001 From: Jeff King Date: Fri, 13 Feb 2009 13:26:09 -0500 Subject: [PATCH 076/149] symbolic-ref: allow refs/ in HEAD Commit afe5d3d5 introduced a safety valve to symbolic-ref to disallow installing an invalid HEAD. It was accompanied by b229d18a, which changed validate_headref to require that HEAD contain a pointer to refs/heads/ instead of just refs/. Therefore, the safety valve also checked for refs/heads/. As it turns out, topgit is using refs/top-bases/ in HEAD, leading us to re-loosen (at least temporarily) the validate_headref check made in b229d18a. This patch does the corresponding loosening for the symbolic-ref safety valve, so that the two are in agreement once more. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano --- builtin-symbolic-ref.c | 4 ++-- t/t1401-symbolic-ref.sh | 5 ----- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/builtin-symbolic-ref.c b/builtin-symbolic-ref.c index cafc4eba7c..6ae6bcc0e8 100644 --- a/builtin-symbolic-ref.c +++ b/builtin-symbolic-ref.c @@ -45,8 +45,8 @@ int cmd_symbolic_ref(int argc, const char **argv, const char *prefix) break; case 2: if (!strcmp(argv[0], "HEAD") && - prefixcmp(argv[1], "refs/heads/")) - die("Refusing to point HEAD outside of refs/heads/"); + prefixcmp(argv[1], "refs/")) + die("Refusing to point HEAD outside of refs/"); create_symref(argv[0], argv[1], msg); break; default: diff --git a/t/t1401-symbolic-ref.sh b/t/t1401-symbolic-ref.sh index 569f34177d..7fa5f5b22a 100755 --- a/t/t1401-symbolic-ref.sh +++ b/t/t1401-symbolic-ref.sh @@ -27,11 +27,6 @@ test_expect_success 'symbolic-ref refuses non-ref for HEAD' ' ' reset_to_sane -test_expect_success 'symbolic-ref refuses non-branch for HEAD' ' - test_must_fail git symbolic-ref HEAD refs/foo -' -reset_to_sane - test_expect_success 'symbolic-ref refuses bare sha1' ' echo content >file && git add file && git commit -m one test_must_fail git symbolic-ref HEAD `git rev-parse HEAD` From 8415d5c7ef63237f6efab0c9aef0b0fdbcbfda25 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Fri, 13 Feb 2009 23:08:05 -0800 Subject: [PATCH 077/149] Teach the "@{-1} syntax to "git branch" This teaches the new "@{-1} syntax to refer to the previous branch to "git branch". After looking at somebody's faulty patch series on a topic branch too long, if you decide it is not worth merging, you can just say: $ git checkout master $ git branch -D @{-1} to get rid of it without having to type the name of the topic you now hate so much for wasting a lot of your time. Signed-off-by: Junio C Hamano --- branch.c | 19 ++++++++++++++----- builtin-branch.c | 31 +++++++++++++++++++------------ t/t0100-previous.sh | 26 ++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 17 deletions(-) create mode 100755 t/t0100-previous.sh diff --git a/branch.c b/branch.c index b1ac837f3d..1f00e44deb 100644 --- a/branch.c +++ b/branch.c @@ -103,14 +103,22 @@ void create_branch(const char *head, struct ref_lock *lock; struct commit *commit; unsigned char sha1[20]; - char *real_ref, ref[PATH_MAX], msg[PATH_MAX + 20]; + char *real_ref, msg[PATH_MAX + 20]; + struct strbuf ref = STRBUF_INIT; int forcing = 0; + int len; - snprintf(ref, sizeof ref, "refs/heads/%s", name); - if (check_ref_format(ref)) + len = strlen(name); + if (interpret_nth_last_branch(name, &ref) != len) { + strbuf_reset(&ref); + strbuf_add(&ref, name, len); + } + strbuf_splice(&ref, 0, 0, "refs/heads/", 11); + + if (check_ref_format(ref.buf)) die("'%s' is not a valid branch name.", name); - if (resolve_ref(ref, sha1, 1, NULL)) { + if (resolve_ref(ref.buf, sha1, 1, NULL)) { if (!force) die("A branch named '%s' already exists.", name); else if (!is_bare_repository() && !strcmp(head, name)) @@ -142,7 +150,7 @@ void create_branch(const char *head, die("Not a valid branch point: '%s'.", start_name); hashcpy(sha1, commit->object.sha1); - lock = lock_any_ref_for_update(ref, NULL, 0); + lock = lock_any_ref_for_update(ref.buf, NULL, 0); if (!lock) die("Failed to lock ref for update: %s.", strerror(errno)); @@ -162,6 +170,7 @@ void create_branch(const char *head, if (write_ref_sha1(lock, sha1, msg) < 0) die("Failed to write ref: %s.", strerror(errno)); + strbuf_release(&ref); free(real_ref); } diff --git a/builtin-branch.c b/builtin-branch.c index 56a1971d69..504a981ad5 100644 --- a/builtin-branch.c +++ b/builtin-branch.c @@ -99,6 +99,7 @@ static int delete_branches(int argc, const char **argv, int force, int kinds) const char *fmt, *remote; int i; int ret = 0; + struct strbuf bname = STRBUF_INIT; switch (kinds) { case REF_REMOTE_BRANCH: @@ -119,20 +120,25 @@ static int delete_branches(int argc, const char **argv, int force, int kinds) if (!head_rev) die("Couldn't look up commit object for HEAD"); } - for (i = 0; i < argc; i++) { - if (kinds == REF_LOCAL_BRANCH && !strcmp(head, argv[i])) { + for (i = 0; i < argc; i++, strbuf_release(&bname)) { + int len = strlen(argv[i]); + + if (interpret_nth_last_branch(argv[i], &bname) != len) + strbuf_add(&bname, argv[i], len); + + if (kinds == REF_LOCAL_BRANCH && !strcmp(head, bname.buf)) { error("Cannot delete the branch '%s' " - "which you are currently on.", argv[i]); + "which you are currently on.", bname.buf); ret = 1; continue; } free(name); - name = xstrdup(mkpath(fmt, argv[i])); + name = xstrdup(mkpath(fmt, bname.buf)); if (!resolve_ref(name, sha1, 1, NULL)) { error("%sbranch '%s' not found.", - remote, argv[i]); + remote, bname.buf); ret = 1; continue; } @@ -152,22 +158,23 @@ static int delete_branches(int argc, const char **argv, int force, int kinds) if (!force && !in_merge_bases(rev, &head_rev, 1)) { error("The branch '%s' is not an ancestor of " - "your current HEAD.\n" - "If you are sure you want to delete it, " - "run 'git branch -D %s'.", argv[i], argv[i]); + "your current HEAD.\n" + "If you are sure you want to delete it, " + "run 'git branch -D %s'.", bname.buf, bname.buf); ret = 1; continue; } if (delete_ref(name, sha1, 0)) { error("Error deleting %sbranch '%s'", remote, - argv[i]); + bname.buf); ret = 1; } else { struct strbuf buf = STRBUF_INIT; - printf("Deleted %sbranch %s (%s).\n", remote, argv[i], - find_unique_abbrev(sha1, DEFAULT_ABBREV)); - strbuf_addf(&buf, "branch.%s", argv[i]); + printf("Deleted %sbranch %s (%s).\n", remote, + bname.buf, + find_unique_abbrev(sha1, DEFAULT_ABBREV)); + strbuf_addf(&buf, "branch.%s", bname.buf); if (git_config_rename_section(buf.buf, NULL) < 0) warning("Update of config-file failed"); strbuf_release(&buf); diff --git a/t/t0100-previous.sh b/t/t0100-previous.sh new file mode 100755 index 0000000000..db51b421d6 --- /dev/null +++ b/t/t0100-previous.sh @@ -0,0 +1,26 @@ +#!/bin/sh + +test_description='previous branch syntax @{-n}' + +. ./test-lib.sh + +test_expect_success 'branch -d @{-1}' ' + test_commit A && + git checkout -b junk && + git checkout - && + test "$(git symbolic-ref HEAD)" = refs/heads/master && + git branch -d @{-1} && + test_must_fail git rev-parse --verify refs/heads/junk +' + +test_expect_success 'branch -d @{-12} when there is not enough switches yet' ' + git reflog expire --expire=now && + git checkout -b junk2 && + git checkout - && + test "$(git symbolic-ref HEAD)" = refs/heads/master && + test_must_fail git branch -d @{-12} && + git rev-parse --verify refs/heads/master +' + +test_done + From c9717ee97075bb333684fa2f63e9136c5f7d89bf Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Fri, 13 Feb 2009 23:26:12 -0800 Subject: [PATCH 078/149] Teach @{-1} to git merge 1.6.2 will have @{-1} syntax advertised as "usable anywhere you can use a branch name". However, "git merge @{-1}" did not work. Signed-off-by: Junio C Hamano --- builtin-merge.c | 15 ++++++++++++--- t/t0100-previous.sh | 23 +++++++++++++++++++++++ 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/builtin-merge.c b/builtin-merge.c index 885fad9bba..6d2160d0a3 100644 --- a/builtin-merge.c +++ b/builtin-merge.c @@ -356,9 +356,14 @@ static void merge_name(const char *remote, struct strbuf *msg) struct object *remote_head; unsigned char branch_head[20], buf_sha[20]; struct strbuf buf = STRBUF_INIT; + struct strbuf bname = STRBUF_INIT; const char *ptr; int len, early; + len = strlen(remote); + if (interpret_nth_last_branch(remote, &bname) == len) + remote = bname.buf; + memset(branch_head, 0, sizeof(branch_head)); remote_head = peel_to_type(remote, 0, NULL, OBJ_COMMIT); if (!remote_head) @@ -371,7 +376,7 @@ static void merge_name(const char *remote, struct strbuf *msg) if (!hashcmp(remote_head->sha1, branch_head)) { strbuf_addf(msg, "%s\t\tbranch '%s' of .\n", sha1_to_hex(branch_head), remote); - return; + goto cleanup; } /* See if remote matches ^^^.. or ~ */ @@ -411,7 +416,8 @@ static void merge_name(const char *remote, struct strbuf *msg) sha1_to_hex(remote_head->sha1), truname.buf + 11, (early ? " (early part)" : "")); - return; + strbuf_release(&truname); + goto cleanup; } } @@ -432,10 +438,13 @@ static void merge_name(const char *remote, struct strbuf *msg) strbuf_remove(&line, ptr-line.buf+1, 13); strbuf_addbuf(msg, &line); strbuf_release(&line); - return; + goto cleanup; } strbuf_addf(msg, "%s\t\tcommit '%s'\n", sha1_to_hex(remote_head->sha1), remote); +cleanup: + strbuf_release(&buf); + strbuf_release(&bname); } static int git_merge_config(const char *k, const char *v, void *cb) diff --git a/t/t0100-previous.sh b/t/t0100-previous.sh index db51b421d6..315b9b3f10 100755 --- a/t/t0100-previous.sh +++ b/t/t0100-previous.sh @@ -22,5 +22,28 @@ test_expect_success 'branch -d @{-12} when there is not enough switches yet' ' git rev-parse --verify refs/heads/master ' +test_expect_success 'merge @{-1}' ' + git checkout A && + test_commit B && + git checkout A && + test_commit C && + git branch -f master B && + git branch -f other && + git checkout other && + git checkout master && + git merge @{-1} && + git cat-file commit HEAD | grep "Merge branch '\''other'\''" +' + +test_expect_success 'merge @{-1} when there is not enough switches yet' ' + git reflog expire --expire=now && + git checkout -f master && + git reset --hard B && + git branch -f other C && + git checkout other && + git checkout master && + test_must_fail git merge @{-12} +' + test_done From 58e9d9d472ff4dbc6cfbf7459878778c739395eb Mon Sep 17 00:00:00 2001 From: Johannes Schindelin Date: Sat, 14 Feb 2009 23:10:10 +0100 Subject: [PATCH 079/149] gc: make --prune useful again by accepting an optional parameter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With this patch, "git gc --no-prune" will not prune any loose (and dangling) object, and "git gc --prune=5.minutes.ago" will prune all loose objects older than 5 minutes. This patch benefitted from suggestions by Thomas Rast and Jan Krï¿œger. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano --- Documentation/git-gc.txt | 10 +++++++++- builtin-gc.c | 19 ++++++++++++------- t/t5304-prune.sh | 38 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 8 deletions(-) diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 7086eea74a..b292e9843a 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -8,7 +8,7 @@ git-gc - Cleanup unnecessary files and optimize the local repository SYNOPSIS -------- -'git gc' [--aggressive] [--auto] [--quiet] +'git gc' [--aggressive] [--auto] [--quiet] [--prune= | --no-prune] DESCRIPTION ----------- @@ -59,6 +59,14 @@ are consolidated into a single pack by using the `-A` option of 'git-repack'. Setting `gc.autopacklimit` to 0 disables automatic consolidation of packs. +--prune=:: + Prune loose objects older than date (default is 2 weeks ago, + overrideable by the config variable `gc.pruneExpire`). This + option is on by default. + +--no-prune:: + Do not prune any loose objects. + --quiet:: Suppress all progress reports. diff --git a/builtin-gc.c b/builtin-gc.c index a2014388da..8d990ed493 100644 --- a/builtin-gc.c +++ b/builtin-gc.c @@ -161,7 +161,8 @@ static int need_to_gc(void) */ if (too_many_packs()) append_option(argv_repack, - !strcmp(prune_expire, "now") ? "-a" : "-A", + prune_expire && !strcmp(prune_expire, "now") ? + "-a" : "-A", MAX_ADD); else if (!too_many_loose_objects()) return 0; @@ -173,14 +174,15 @@ static int need_to_gc(void) int cmd_gc(int argc, const char **argv, const char *prefix) { - int prune = 0; int aggressive = 0; int auto_gc = 0; int quiet = 0; char buf[80]; struct option builtin_gc_options[] = { - OPT_BOOLEAN(0, "prune", &prune, "prune unreferenced objects (deprecated)"), + { OPTION_STRING, 0, "prune", &prune_expire, "date", + "prune unreferenced objects", + PARSE_OPT_OPTARG, NULL, (intptr_t)prune_expire }, OPT_BOOLEAN(0, "aggressive", &aggressive, "be more thorough (increased runtime)"), OPT_BOOLEAN(0, "auto", &auto_gc, "enable auto-gc mode"), OPT_BOOLEAN('q', "quiet", &quiet, "suppress progress reports"), @@ -218,7 +220,8 @@ int cmd_gc(int argc, const char **argv, const char *prefix) "\"git help gc\" for more information.\n"); } else append_option(argv_repack, - !strcmp(prune_expire, "now") ? "-a" : "-A", + prune_expire && !strcmp(prune_expire, "now") + ? "-a" : "-A", MAX_ADD); if (pack_refs && run_command_v_opt(argv_pack_refs, RUN_GIT_CMD)) @@ -230,9 +233,11 @@ int cmd_gc(int argc, const char **argv, const char *prefix) if (run_command_v_opt(argv_repack, RUN_GIT_CMD)) return error(FAILED_RUN, argv_repack[0]); - argv_prune[2] = prune_expire; - if (run_command_v_opt(argv_prune, RUN_GIT_CMD)) - return error(FAILED_RUN, argv_prune[0]); + if (prune_expire) { + argv_prune[2] = prune_expire; + if (run_command_v_opt(argv_prune, RUN_GIT_CMD)) + return error(FAILED_RUN, argv_prune[0]); + } if (run_command_v_opt(argv_rerere, RUN_GIT_CMD)) return error(FAILED_RUN, argv_rerere[0]); diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index 771c0a06a4..55ed7c7935 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -112,4 +112,42 @@ test_expect_success 'prune: do not prune heads listed as an argument' ' ' +test_expect_success 'gc --no-prune' ' + + before=$(git count-objects | sed "s/ .*//") && + BLOB=$(echo aleph_0 | git hash-object -w --stdin) && + BLOB_FILE=.git/objects/$(echo $BLOB | sed "s/^../&\//") && + test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && + test -f $BLOB_FILE && + test-chmtime =-$((86400*5001)) $BLOB_FILE && + git config gc.pruneExpire 2.days.ago && + git gc --no-prune && + test 1 = $(git count-objects | sed "s/ .*//") && + test -f $BLOB_FILE + +' + +test_expect_success 'gc respects gc.pruneExpire' ' + + git config gc.pruneExpire 5002.days.ago && + git gc && + test -f $BLOB_FILE && + git config gc.pruneExpire 5000.days.ago && + git gc && + test ! -f $BLOB_FILE + +' + +test_expect_success 'gc --prune=' ' + + BLOB=$(echo aleph_0 | git hash-object -w --stdin) && + BLOB_FILE=.git/objects/$(echo $BLOB | sed "s/^../&\//") && + test-chmtime =-$((86400*5001)) $BLOB_FILE && + git gc --prune=5002.days.ago && + test -f $BLOB_FILE && + git gc --prune=5000.days.ago && + test ! -f $BLOB_FILE + +' + test_done From d0268de6d755c72ff375ec95a0cc0dbd99dc31e2 Mon Sep 17 00:00:00 2001 From: Thomas Rast Date: Sat, 14 Feb 2009 21:56:51 +0100 Subject: [PATCH 080/149] Documentation: pruning recipe for destructive filter-branch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a section about how to shrink a repository's size after running git-filter-branch to remove large blobs from history. This comes up every week or so on IRC, and the commands required to handle every case are not very newbie-friendly, so hopefully writing them down somewhere leads to fewer questions. It may seem contradictory to document fallbacks for older Gits in newer docs, but we want to point people at this as a FAQ answer, and they will frequently not have the newest version installed. Thanks to Björn Steinbrink and Junio C Hamano for comments and corrections. Signed-off-by: Thomas Rast Signed-off-by: Junio C Hamano --- Documentation/git-filter-branch.txt | 41 +++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 1fbbbb4025..7ffe03f427 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -339,6 +339,47 @@ git filter-branch --index-filter \ --------------------------------------------------------------- + +Checklist for Shrinking a Repository +------------------------------------ + +git-filter-branch is often used to get rid of a subset of files, +usually with some combination of `\--index-filter` and +`\--subdirectory-filter`. People expect the resulting repository to +be smaller than the original, but you need a few more steps to +actually make it smaller, because git tries hard not to lose your +objects until you tell it to. First make sure that: + +* You really removed all variants of a filename, if a blob was moved + over its lifetime. `git log \--name-only \--follow \--all \-- + filename` can help you find renames. + +* You really filtered all refs: use `\--tag-name-filter cat \-- + \--all` when calling git-filter-branch. + +Then there are two ways to get a smaller repository. A safer way is +to clone, that keeps your original intact. + +* Clone it with `git clone +++file:///path/to/repo+++`. The clone + will not have the removed objects. See linkgit:git-clone[1]. (Note + that cloning with a plain path just hardlinks everything!) + +If you really don't want to clone it, for whatever reasons, check the +following points instead (in this order). This is a very destructive +approach, so *make a backup* or go back to cloning it. You have been +warned. + +* Remove the original refs backed up by git-filter-branch: say `git + for-each-ref \--format="%(refname)" refs/original/ | xargs -n 1 git + update-ref -d`. + +* Expire all reflogs with `git reflog expire \--expire=now \--all`. + +* Garbage collect all unreferenced objects with `git gc \--prune=now` + (or if your git-gc is not new enough to support arguments to + `\--prune`, use `git repack -ad; git prune` instead). + + Author ------ Written by Petr "Pasky" Baudis , From 8fb3c00d2ea4dad96fe977f8983ba0376e0c4986 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?SZEDER=20G=C3=A1bor?= Date: Sat, 14 Feb 2009 17:16:28 +0100 Subject: [PATCH 081/149] Move 'rev-parse --git-dir' test to t1500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 72183cb2 (Fix gitdir detection when in subdir of gitdir, 2009-01-16) added a test to 't1501-worktree' to check the behaviour of 'git rev-parse --git-dir' in a special case. However, t1501 is about testing separate work tree setups, and not about basic 'rev-parse' functionality, which is tested in t1500-rev-parse. Therefore, this patch moves that test to t1500. Signed-off-by: SZEDER Gábor Signed-off-by: Junio C Hamano --- t/t1500-rev-parse.sh | 11 +++++++++-- t/t1501-worktree.sh | 7 ------- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/t/t1500-rev-parse.sh b/t/t1500-rev-parse.sh index 85da4caa7e..186792e3a2 100755 --- a/t/t1500-rev-parse.sh +++ b/t/t1500-rev-parse.sh @@ -26,16 +26,23 @@ test_rev_parse() { "test '$1' = \"\$(git rev-parse --show-prefix)\"" shift [ $# -eq 0 ] && return + + test_expect_success "$name: git-dir" \ + "test '$1' = \"\$(git rev-parse --git-dir)\"" + shift + [ $# -eq 0 ] && return } -# label is-bare is-inside-git is-inside-work prefix +# label is-bare is-inside-git is-inside-work prefix git-dir + +ROOT=$(pwd) test_rev_parse toplevel false false true '' cd .git || exit 1 test_rev_parse .git/ false true false '' cd objects || exit 1 -test_rev_parse .git/objects/ false true false '' +test_rev_parse .git/objects/ false true false '' "$ROOT/.git" cd ../.. || exit 1 mkdir -p sub/dir || exit 1 diff --git a/t/t1501-worktree.sh b/t/t1501-worktree.sh index 27dc6c55d5..f6a6f839a1 100755 --- a/t/t1501-worktree.sh +++ b/t/t1501-worktree.sh @@ -92,13 +92,6 @@ cd sub/dir || exit 1 test_rev_parse 'in repo.git/sub/dir' false true true sub/dir/ cd ../../../.. || exit 1 -test_expect_success 'detecting gitdir when cwd is in a subdir of gitdir' ' - (expected=$(pwd)/repo.git && - cd repo.git/refs && - unset GIT_DIR && - test "$expected" = "$(git rev-parse --git-dir)") -' - test_expect_success 'repo finds its work tree' ' (cd repo.git && : > work/sub/dir/untracked && From db7fee8758cfe17b0f06ddae7bb4259ed506240c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?SZEDER=20G=C3=A1bor?= Date: Sat, 14 Feb 2009 17:16:29 +0100 Subject: [PATCH 082/149] t1500: more 'git rev-parse --git-dir' tests MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Extend t1500 with tests of 'git rev-parse --git-dir' when invoked from other directories of the repository or the work tree. Signed-off-by: SZEDER Gábor Signed-off-by: Junio C Hamano --- t/t1500-rev-parse.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/t/t1500-rev-parse.sh b/t/t1500-rev-parse.sh index 186792e3a2..48ee07779d 100755 --- a/t/t1500-rev-parse.sh +++ b/t/t1500-rev-parse.sh @@ -37,17 +37,17 @@ test_rev_parse() { ROOT=$(pwd) -test_rev_parse toplevel false false true '' +test_rev_parse toplevel false false true '' .git cd .git || exit 1 -test_rev_parse .git/ false true false '' +test_rev_parse .git/ false true false '' . cd objects || exit 1 test_rev_parse .git/objects/ false true false '' "$ROOT/.git" cd ../.. || exit 1 mkdir -p sub/dir || exit 1 cd sub/dir || exit 1 -test_rev_parse subdirectory false false true sub/dir/ +test_rev_parse subdirectory false false true sub/dir/ "$ROOT/.git" cd ../.. || exit 1 git config core.bare true From 48c9ab78f3c7a0cc51e8d17bb7e37a075996c223 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?SZEDER=20G=C3=A1bor?= Date: Sat, 14 Feb 2009 17:21:52 +0100 Subject: [PATCH 083/149] bash: fix misspelled 'git svn' option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit '--user-log-author' -> '--use-log-author' Signed-off-by: SZEDER Gábor Signed-off-by: Junio C Hamano --- contrib/completion/git-completion.bash | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index a7a10c0d79..412d2c0dab 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1610,7 +1610,7 @@ _git_svn () --follow-parent --authors-file= --repack= --no-metadata --use-svm-props --use-svnsync-props --log-window-size= --no-checkout --quiet - --repack-flags --user-log-author --localtime $remote_opts + --repack-flags --use-log-author --localtime $remote_opts " local init_opts=" --template= --shared= --trunk= --tags= From dfab7c144eb2f02fc1481173422ecc416a060155 Mon Sep 17 00:00:00 2001 From: Tay Ray Chuan Date: Sat, 14 Feb 2009 17:52:14 +0800 Subject: [PATCH 084/149] use a hash of the lock token as the suffix for PUT/MOVE After 753bc91 ("Remove the requirement opaquelocktoken uri scheme"), lock tokens are in the URI forms in which they are received from the server, eg. 'opaquelocktoken:', 'urn:uuid:'. However, "start_put" (and consequently "start_move"), which attempts to create a unique temporary file using the UUID of the lock token, inadvertently uses the lock token in its URI form. These file operations on the server may not be successful (specifically, in Windows), due to the colon ':' character from the URI form of the lock token in the file path. This patch uses a hash of the lock token instead, guaranteeing only "safe" characters (a-f, 0-9) are used in the file path. The token's hash is generated when the lock token is received from the server in handle_new_lock_ctx, minimizing the number of times of hashing. Signed-off-by: Tay Ray Chuan Signed-off-by: Junio C Hamano --- http-push.c | 13 +++++++++++-- t/t5540-http-push.sh | 7 +++++++ 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/http-push.c b/http-push.c index bb00728f14..55ad808023 100644 --- a/http-push.c +++ b/http-push.c @@ -152,6 +152,7 @@ struct remote_lock char *url; char *owner; char *token; + char tmpfile_suffix[41]; time_t start_time; long timeout; int refreshing; @@ -556,8 +557,7 @@ static void start_put(struct transfer_request *request) request->dest = strbuf_detach(&buf, NULL); append_remote_object_url(&buf, remote->url, hex, 0); - strbuf_addstr(&buf, "_"); - strbuf_addstr(&buf, request->lock->token); + strbuf_add(&buf, request->lock->tmpfile_suffix, 41); request->url = strbuf_detach(&buf, NULL); slot = get_active_slot(); @@ -1129,6 +1129,8 @@ static void handle_lockprop_ctx(struct xml_ctx *ctx, int tag_closed) static void handle_new_lock_ctx(struct xml_ctx *ctx, int tag_closed) { struct remote_lock *lock = (struct remote_lock *)ctx->userData; + git_SHA_CTX sha_ctx; + unsigned char lock_token_sha1[20]; if (tag_closed && ctx->cdata) { if (!strcmp(ctx->name, DAV_ACTIVELOCK_OWNER)) { @@ -1141,6 +1143,13 @@ static void handle_new_lock_ctx(struct xml_ctx *ctx, int tag_closed) } else if (!strcmp(ctx->name, DAV_ACTIVELOCK_TOKEN)) { lock->token = xmalloc(strlen(ctx->cdata) + 1); strcpy(lock->token, ctx->cdata); + + git_SHA1_Init(&sha_ctx); + git_SHA1_Update(&sha_ctx, lock->token, strlen(lock->token)); + git_SHA1_Final(lock_token_sha1, &sha_ctx); + + lock->tmpfile_suffix[0] = '_'; + memcpy(lock->tmpfile_suffix + 1, sha1_to_hex(lock_token_sha1), 40); } } } diff --git a/t/t5540-http-push.sh b/t/t5540-http-push.sh index c236b5e83b..11b343274f 100755 --- a/t/t5540-http-push.sh +++ b/t/t5540-http-push.sh @@ -94,6 +94,13 @@ test_expect_success 'MKCOL sends directory names with trailing slashes' ' ' +test_expect_success 'PUT and MOVE sends object to URLs with SHA-1 hash suffix' ' + + grep -P "\"(?:PUT|MOVE) .+objects/[\da-z]{2}/[\da-z]{38}_[\da-z\-]{40} HTTP/[0-9.]+\" 20\d" \ + < "$HTTPD_ROOT_PATH"/access.log + +' + stop_httpd test_done From 075394e26cd7fb38e08d5f637a5fc825ab0b3fb3 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sun, 15 Feb 2009 00:15:52 -0800 Subject: [PATCH 085/149] RelNotes Update Signed-off-by: Junio C Hamano --- Documentation/RelNotes-1.6.2.txt | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/Documentation/RelNotes-1.6.2.txt b/Documentation/RelNotes-1.6.2.txt index 6ed31595ba..d3e9583abf 100644 --- a/Documentation/RelNotes-1.6.2.txt +++ b/Documentation/RelNotes-1.6.2.txt @@ -10,9 +10,17 @@ To ease the transition plan, the receiving repository of such a push running this release will issue a big warning when the configuration variable is missing. Please refer to: + http://git.or.cz/gitwiki/GitFaq#non-bare http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007 -for more details on the transition plan. +for more details on the reason why this change is needed and the +transition plan. + +For a similar reason, "git push $there :$killed" to delete the branch +$killed in a remote repository $there, if $killed branch is the current +branch pointed at by its HEAD, gets a large warning. You can choose what +should happen upon such a push by setting the configuration variable +receive.denyDeleteCurrent in the receiving repository. Updates since v1.6.1 @@ -40,8 +48,17 @@ Updates since v1.6.1 * @{-1} is a way to refer to the last branch you were on. This is accepted not only where an object name is expected, but anywhere - a branch name is expected. E.g. "git branch --track mybranch @{-1}" - "git rev-parse --symbolic-full-name @{-1}". + a branch name is expected and acts as if you typed the branch name. + E.g. "git branch --track mybranch @{-1}", "git merge @{-1}", and + "git rev-parse --symbolic-full-name @{-1}" would work as expected. + +* When refs/remotes/origin/HEAD points at a remote tracking branch that + has been pruned away, many git operations issued warning when they + internally enumerated the refs. We now warn only when you say "origin" + to refer to that pruned branch. + +* The location of .mailmap file can be configured, and its file format was + enhanced to allow mapping an incorrect e-mail field as well. * "git add -p" learned 'g'oto action to jump directly to a hunk. @@ -91,6 +108,9 @@ Updates since v1.6.1 * "git fsck" now checks loose objects in alternate object stores, instead of misreporting them as missing. +* "git gc --prune" was resurrected to allow "git gc --no-prune" and + giving non-default expiration period e.g. "git gc --prune=now". + * "git grep -w" and "git grep" for fixed strings have been optimized. * "git mergetool" learned -y(--no-prompt) option to disable prompting. @@ -102,6 +122,8 @@ Updates since v1.6.1 "git checkout" switches branches, taking the local changes while switching to another commit. +* "git submodule update" learned --no-fetch option. + * "git tag" learned --contains that works the same way as the same option from "git branch". @@ -140,6 +162,6 @@ v1.6.1.X series. -- exec >/var/tmp/1 -O=v1.6.1.3-371-gc19923a +v1.6.2-rc0-89-gf7a2bdb echo O=$(git describe master) git shortlog --no-merges $O..master ^maint From 88a667f0630e8b9c7679127d3b9364447727e587 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ren=C3=A9=20Scharfe?= Date: Sun, 15 Feb 2009 19:18:58 +0100 Subject: [PATCH 086/149] builtin-receive-pack.c: fix compiler warnings about format string While all of the strings passed to warning() are, in fact, literals, the compiler doesn't recognize them as such because it doesn't see through the loop used to iterate over them: builtin-receive-pack.c: In function 'warn_unconfigured_deny': builtin-receive-pack.c:247: warning: format not a string literal and no format arguments builtin-receive-pack.c: In function 'warn_unconfigured_deny_delete_current': builtin-receive-pack.c:273: warning: format not a string literal and no format arguments Calm the compiler by adding easily recognizable format string literals. Signed-off-by: Rene Scharfe Signed-off-by: Junio C Hamano --- builtin-receive-pack.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/builtin-receive-pack.c b/builtin-receive-pack.c index f7e04c45f9..849f1fe6f9 100644 --- a/builtin-receive-pack.c +++ b/builtin-receive-pack.c @@ -244,7 +244,7 @@ static void warn_unconfigured_deny(void) { int i; for (i = 0; i < ARRAY_SIZE(warn_unconfigured_deny_msg); i++) - warning(warn_unconfigured_deny_msg[i]); + warning("%s", warn_unconfigured_deny_msg[i]); } static char *warn_unconfigured_deny_delete_current_msg[] = { @@ -270,7 +270,7 @@ static void warn_unconfigured_deny_delete_current(void) for (i = 0; i < ARRAY_SIZE(warn_unconfigured_deny_delete_current_msg); i++) - warning(warn_unconfigured_deny_delete_current_msg[i]); + warning("%s", warn_unconfigured_deny_delete_current_msg[i]); } static const char *update(struct command *cmd) From 1b7e543a6e2f156536a3cf227f9da1029bba6265 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?D=C3=A9vai=20Tam=C3=A1s?= Date: Thu, 12 Feb 2009 00:14:02 +0100 Subject: [PATCH 087/149] git-svn: Fix for rewriteRoot URL containing username. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the new svn root URL given with the svn-remote..rewriteRoot config option (or by the --rewrite-root option to 'git svn init') contains a username (such as 'svn+ssh://username@example.com/repo'), find_by_url() cannot find the repository URL, because the URL contained in the commit message does have the username removed. Signed-off-by: Dévai Tamás Acked-by: Eric Wong Signed-off-by: Junio C Hamano --- git-svn.perl | 1 + 1 file changed, 1 insertion(+) diff --git a/git-svn.perl b/git-svn.perl index 001a1d8eff..83cb36f065 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -1693,6 +1693,7 @@ sub find_by_url { # repos_root and, path are optional my $prefix = ''; if ($rwr) { $z = $rwr; + remove_username($z); } elsif (defined $svm) { $z = $svm->{source}; $prefix = $svm->{replace}; From d532ebd5a799fe2c991a96004bf739434e6ecaf4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?SZEDER=20G=C3=A1bor?= Date: Sun, 15 Feb 2009 14:25:11 +0100 Subject: [PATCH 088/149] bash: add missing 'git merge' options MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Namely: '--commit', '--stat', '--no-squash', '--ff', '--no-ff'. One might wonder why add options that specify the default behaviour anyway (e.g. '--commit', '--no-squash', etc.). Users can override the default with config options (e.g. 'branch..mergeoptions', 'merge.log'), but sometimes might still need the default behaviour. Signed-off-by: SZEDER Gábor Acked-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- contrib/completion/git-completion.bash | 1 + 1 file changed, 1 insertion(+) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 412d2c0dab..0bb768f1c1 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1037,6 +1037,7 @@ _git_merge () --*) __gitcomp " --no-commit --no-stat --log --no-log --squash --strategy + --commit --stat --no-squash --ff --no-ff " return esac From 4a5856cb249579845e24713225bc1749a9b20482 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?SZEDER=20G=C3=A1bor?= Date: Sat, 14 Feb 2009 17:21:53 +0100 Subject: [PATCH 089/149] bash: update 'git svn' options MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'git svn' got some new subcommands and otions in the last couple of months. This patch adds completion support for them. In particular: * 'fetch', 'clone', etc.: '--ignore-paths=' * 'init' and 'clone': '--prefix=', '--use-log-author', '--add-author-from' * 'dcommit': '--commit-url', '--revision' * 'log': '--color' * 'rebase': '--dry-run' * 'branch', 'tag', 'blame', 'migrate' subcommands and their options Signed-off-by: SZEDER Gábor Acked-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- contrib/completion/git-completion.bash | 31 +++++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 0bb768f1c1..003017ac1b 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1600,7 +1600,8 @@ _git_svn () local subcommands=" init fetch clone rebase dcommit log find-rev set-tree commit-diff info create-ignore propget - proplist show-ignore show-externals + proplist show-ignore show-externals branch tag blame + migrate " local subcommand="$(__git_find_subcommand "$subcommands")" if [ -z "$subcommand" ]; then @@ -1611,13 +1612,15 @@ _git_svn () --follow-parent --authors-file= --repack= --no-metadata --use-svm-props --use-svnsync-props --log-window-size= --no-checkout --quiet - --repack-flags --use-log-author --localtime $remote_opts + --repack-flags --use-log-author --localtime + --ignore-paths= $remote_opts " local init_opts=" --template= --shared= --trunk= --tags= --branches= --stdlayout --minimize-url --no-metadata --use-svm-props --use-svnsync-props - --rewrite-root= $remote_opts + --rewrite-root= --prefix= --use-log-author + --add-author-from $remote_opts " local cmt_opts=" --edit --rmdir --find-copies-harder --copy-similarity= @@ -1637,7 +1640,8 @@ _git_svn () dcommit,--*) __gitcomp " --merge --strategy= --verbose --dry-run - --fetch-all --no-rebase $cmt_opts $fc_opts + --fetch-all --no-rebase --commit-url + --revision $cmt_opts $fc_opts " ;; set-tree,--*) @@ -1651,13 +1655,13 @@ _git_svn () __gitcomp " --limit= --revision= --verbose --incremental --oneline --show-commit --non-recursive - --authors-file= + --authors-file= --color " ;; rebase,--*) __gitcomp " --merge --verbose --strategy= --local - --fetch-all $fc_opts + --fetch-all --dry-run $fc_opts " ;; commit-diff,--*) @@ -1666,6 +1670,21 @@ _git_svn () info,--*) __gitcomp "--url" ;; + branch,--*) + __gitcomp "--dry-run --message --tag" + ;; + tag,--*) + __gitcomp "--dry-run --message" + ;; + blame,--*) + __gitcomp "--git-format" + ;; + migrate,--*) + __gitcomp " + --config-dir= --ignore-paths= --minimize + --no-auth-cache --username= + " + ;; *) COMPREPLY=() ;; From 81d3fe9f4871e42ebd1af0221fa091fe5476e2f7 Mon Sep 17 00:00:00 2001 From: Giuseppe Bilotta Date: Sun, 15 Feb 2009 10:18:36 +0100 Subject: [PATCH 090/149] gitweb: fix wrong base URL when non-root DirectoryIndex CGI::url() has some issues when rebuilding the script URL if the script is a DirectoryIndex. One of these issue is the inability to strip PATH_INFO, which is why we had to do it ourselves. Another issue is that the resulting URL cannot be used for the tag: it works if we're the DirectoryIndex at the root level, but not otherwise. We fix this by building the proper base URL ourselves, and improve the comment about the need to strip PATH_INFO manually while we're at it. Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified to set SCRIPT_NAME variable (CGI standard states that it MUST be set, and now gitweb uses it if PATH_INFO is not empty, as is the case for some of tests in t9500). Signed-off-by: Giuseppe Bilotta Signed-off-by: Jakub Narebski Signed-off-by: Junio C Hamano --- gitweb/gitweb.perl | 28 ++++++++++++++++++++------ t/t9500-gitweb-standalone-no-errors.sh | 6 ++++-- 2 files changed, 26 insertions(+), 8 deletions(-) diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 8dffa3fd53..7c481811af 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -27,13 +27,29 @@ our $version = "++GIT_VERSION++"; our $my_url = $cgi->url(); our $my_uri = $cgi->url(-absolute => 1); -# if we're called with PATH_INFO, we have to strip that -# from the URL to find our real URL -# we make $path_info global because it's also used later on +# Base URL for relative URLs in gitweb ($logo, $favicon, ...), +# needed and used only for URLs with nonempty PATH_INFO +our $base_url = $my_url; + +# When the script is used as DirectoryIndex, the URL does not contain the name +# of the script file itself, and $cgi->url() fails to strip PATH_INFO, so we +# have to do it ourselves. We make $path_info global because it's also used +# later on. +# +# Another issue with the script being the DirectoryIndex is that the resulting +# $my_url data is not the full script URL: this is good, because we want +# generated links to keep implying the script name if it wasn't explicitly +# indicated in the URL we're handling, but it means that $my_url cannot be used +# as base URL. +# Therefore, if we needed to strip PATH_INFO, then we know that we have +# to build the base URL ourselves: our $path_info = $ENV{"PATH_INFO"}; if ($path_info) { - $my_url =~ s,\Q$path_info\E$,,; - $my_uri =~ s,\Q$path_info\E$,,; + if ($my_url =~ s,\Q$path_info\E$,, && + $my_uri =~ s,\Q$path_info\E$,, && + defined $ENV{'SCRIPT_NAME'}) { + $base_url = $cgi->url(-base => 1) . $ENV{'SCRIPT_NAME'}; + } } # core git executable to use @@ -2908,7 +2924,7 @@ EOF # the stylesheet, favicon etc urls won't work correctly with path_info # unless we set the appropriate base URL if ($ENV{'PATH_INFO'}) { - print '\n'; + print "\n"; } # print out each stylesheet that exist, providing backwards capability # for those people who defined $stylesheet in a config file diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index 43cd6eecba..7c6f70bbd8 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -43,9 +43,11 @@ gitweb_run () { GATEWAY_INTERFACE="CGI/1.1" HTTP_ACCEPT="*/*" REQUEST_METHOD="GET" + SCRIPT_NAME="$TEST_DIRECTORY/../gitweb/gitweb.perl" QUERY_STRING=""$1"" PATH_INFO=""$2"" - export GATEWAY_INTERFACE HTTP_ACCEPT REQUEST_METHOD QUERY_STRING PATH_INFO + export GATEWAY_INTERFACE HTTP_ACCEPT REQUEST_METHOD \ + SCRIPT_NAME QUERY_STRING PATH_INFO GITWEB_CONFIG=$(pwd)/gitweb_config.perl export GITWEB_CONFIG @@ -54,7 +56,7 @@ gitweb_run () { # written to web server logs, so we are not interested in that: # we are interested only in properly formatted errors/warnings rm -f gitweb.log && - perl -- "$TEST_DIRECTORY/../gitweb/gitweb.perl" \ + perl -- "$SCRIPT_NAME" \ >/dev/null 2>gitweb.log && if grep "^[[]" gitweb.log >/dev/null 2>&1; then false; else true; fi From 861050cc2eaa963fcdb3b0860b854aee5f87e727 Mon Sep 17 00:00:00 2001 From: Johannes Sixt Date: Tue, 17 Feb 2009 18:54:01 +0100 Subject: [PATCH 091/149] t3400-rebase: Move detached HEAD check earlier 3ec7371f (Add two extra tests for git rebase, 2009-02-09) added a check that rebase works on a detached HEAD. For this check, the last test was picked, whose topic is to rebase a mode change. This rebase operation amounts to a no-op on Windows/MinGW so that HEAD@{1} *is* modechange@{1}, and the intended detached HEAD test fails. This patch moves the check earlier, into the group of tests that check basic rebase properties. Signed-off-by: Johannes Sixt --- t/t3400-rebase.sh | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 8c0c5f5982..be7ae5a004 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -48,6 +48,10 @@ test_expect_success \ 'the rebase operation should not have destroyed author information' \ '! (git log | grep "Author:" | grep "<>")' +test_expect_success 'HEAD was detached during rebase' ' + test $(git rev-parse HEAD@{1}) != $(git rev-parse my-topic-branch@{1}) +' + test_expect_success 'rebase after merge master' ' git reset --hard topic && git merge master && @@ -85,10 +89,6 @@ test_expect_success 'rebase a single mode change' ' GIT_TRACE=1 git rebase master ' -test_expect_success 'HEAD was detached during rebase' ' - test $(git rev-parse HEAD@{1}) != $(git rev-parse modechange@{1}) -' - test_expect_success 'Show verbose error when HEAD could not be detached' ' : > B && test_must_fail git rebase topic 2> output.err > output.out && From a393777ec9ca7c33cb76efa225ddacc53784c0dd Mon Sep 17 00:00:00 2001 From: Thomas Rast Date: Mon, 16 Feb 2009 17:34:56 +0100 Subject: [PATCH 092/149] bash completion: refactor common log, shortlog and gitk options Refactor options that are useful for more than one of them into a variable used by the relevant completions. This has the effect of adding the following options to git-log: --branches --tags --remotes --first-parent --dense --sparse --simplify-merges --simplify-by-decoration --first-parent --no-merges The following to git-shortlog: --branches --tags --remotes --first-parent And the following to gitk: --branches --tags --remotes --first-parent --no-merges --max-count= --max-age= --since= --after= --min-age= --until= --before= --dense --sparse --full-history --simplify-merges --simplify-by-decoration --left-right Signed-off-by: Thomas Rast Acked-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- contrib/completion/git-completion.bash | 49 ++++++++++++++++++-------- 1 file changed, 34 insertions(+), 15 deletions(-) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 003017ac1b..6e5260ee75 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -975,6 +975,27 @@ _git_ls_tree () __git_complete_file } +# Options that go well for log, shortlog and gitk +__git_log_common_options=" + --not --all + --branches --tags --remotes + --first-parent --no-merges + --max-count= + --max-age= --since= --after= + --min-age= --until= --before= +" +# Options that go well for log and gitk (not shortlog) +__git_log_gitk_options=" + --dense --sparse --full-history + --simplify-merges --simplify-by-decoration + --left-right +" +# Options that go well for log and shortlog (not gitk) +__git_log_shortlog_options=" + --author= --committer= --grep= + --all-match +" + __git_log_pretty_formats="oneline short medium full fuller email raw format:" _git_log () @@ -996,21 +1017,19 @@ _git_log () ;; --*) __gitcomp " - --max-count= --max-age= --since= --after= - --min-age= --before= --until= + $__git_log_common_options + $__git_log_shortlog_options + $__git_log_gitk_options --root --topo-order --date-order --reverse - --no-merges --follow + --follow --abbrev-commit --abbrev= --relative-date --date= - --author= --committer= --grep= - --all-match --pretty= - --not --all - --left-right --cherry-pick + --cherry-pick --graph --decorate --walk-reflogs - --parents --children --full-history + --parents --children --merge $__git_diff_common_options --pickaxe-all --pickaxe-regex @@ -1496,12 +1515,8 @@ _git_shortlog () case "$cur" in --*) __gitcomp " - --max-count= --max-age= --since= --after= - --min-age= --before= --until= - --no-merges - --author= --committer= --grep= - --all-match - --not --all + $__git_log_common_options + $__git_log_shortlog_options --numbered --summary " return @@ -1828,7 +1843,11 @@ _gitk () fi case "$cur" in --*) - __gitcomp "--not --all $merge" + __gitcomp " + $__git_log_common_options + $__git_log_gitk_options + $merge + " return ;; esac From bf3c20f6e855521fb92f455a9e70fbe8f107c53d Mon Sep 17 00:00:00 2001 From: Thomas Rast Date: Mon, 16 Feb 2009 17:34:57 +0100 Subject: [PATCH 093/149] bash completion: only show 'log --merge' if merging The gitk completion only shows --merge if MERGE_HEAD is present. Do it the same way for git-log completion. Signed-off-by: Thomas Rast Acked-by: Shawn O. Pearce Signed-off-by: Junio C Hamano --- contrib/completion/git-completion.bash | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 6e5260ee75..0a3092f646 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -1003,6 +1003,11 @@ _git_log () __git_has_doubledash && return local cur="${COMP_WORDS[COMP_CWORD]}" + local g="$(git rev-parse --git-dir 2>/dev/null)" + local merge="" + if [ -f $g/MERGE_HEAD ]; then + merge="--merge" + fi case "$cur" in --pretty=*) __gitcomp "$__git_log_pretty_formats @@ -1030,7 +1035,7 @@ _git_log () --decorate --walk-reflogs --parents --children - --merge + $merge $__git_diff_common_options --pickaxe-all --pickaxe-regex " From bed5122f23c3584f2bae43e1af2f41fbe939c971 Mon Sep 17 00:00:00 2001 From: Gerrit Pape Date: Tue, 17 Feb 2009 09:25:02 +0000 Subject: [PATCH 094/149] Documentation/git-push: --all, --mirror, --tags can not be combined While b259f09 made git-push output a better error message for 'git-push --all --tags', this commit fixes the synopsis in the documentation. Inconsistency spotted and fix suggested by Jari Aalto through http://bugs.debian.org/502567 Signed-off-by: Gerrit Pape Signed-off-by: Junio C Hamano --- Documentation/git-push.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 7d1eced7d2..ac6421178c 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -9,7 +9,7 @@ git-push - Update remote refs along with associated objects SYNOPSIS -------- [verse] -'git push' [--all | --mirror] [--dry-run] [--tags] [--receive-pack=] +'git push' [--all | --mirror | --tags] [--dry-run] [--receive-pack=] [--repo=] [-f | --force] [-v | --verbose] [ ...] From df5d10a32ebc4f2305e13b70e2c01e4fa2cc73f0 Mon Sep 17 00:00:00 2001 From: "Marcel M. Cary" Date: Wed, 18 Feb 2009 14:09:41 +0100 Subject: [PATCH 095/149] gitweb: Fix warnings with override permitted but no repo override When a feature like "blame" is permitted to be overridden in the repository configuration but it is not actually set in the repository, a warning is emitted due to the undefined value of the repository configuration, even though it's a perfectly normal condition. Emitting warning is grounds for test failure in the gitweb test script. This error was caused by rewrite of git_get_project_config from using "git config [] " for each individual configuration variable checked to parsing "git config --list --null" output in commit b201927 (gitweb: Read repo config using 'git config -z -l'). Earlier version of git_get_project_config was returning empty string if variable do not exist in config; newer version is meant to return undef in this case, therefore change in feature_bool was needed. Additionally config_to_* subroutines were meant to be invoked only if configuration variable exists; therefore we added early return to git_get_project_config: it now returns no value if variable does not exists in config. Otherwise config_to_* subroutines (config_to_bool in paryicular) wouldn't be able to distinguish between the case where variable does not exist and the case where variable doesn't have value (the "[section] noval" case, which evaluates to true for boolean). While at it fix bug in config_to_bool, where checking if $val is defined (if config variable has value) was done _after_ stripping leading and trailing whitespace, which lead to 'Use of uninitialized value' warning. Add test case for features overridable but not overriden in repo config, and case for no value boolean configuration variable. Signed-off-by: Marcel M. Cary Signed-off-by: Jakub Narebski Signed-off-by: Junio C Hamano --- gitweb/gitweb.perl | 16 ++++++++++------ t/t9500-gitweb-standalone-no-errors.sh | 18 +++++++++++++++++- 2 files changed, 27 insertions(+), 7 deletions(-) diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 7c481811af..83858fb8b9 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -402,13 +402,13 @@ sub feature_bool { my $key = shift; my ($val) = git_get_project_config($key, '--bool'); - if ($val eq 'true') { + if (!defined $val) { + return ($_[0]); + } elsif ($val eq 'true') { return (1); } elsif ($val eq 'false') { return (0); } - - return ($_[0]); } sub feature_snapshot { @@ -1914,18 +1914,19 @@ sub git_parse_project_config { return %config; } -# convert config value to boolean, 'true' or 'false' +# convert config value to boolean: 'true' or 'false' # no value, number > 0, 'true' and 'yes' values are true # rest of values are treated as false (never as error) sub config_to_bool { my $val = shift; + return 1 if !defined $val; # section.key + # strip leading and trailing whitespace $val =~ s/^\s+//; $val =~ s/\s+$//; - return (!defined $val || # section.key - ($val =~ /^\d+$/ && $val) || # section.key = 1 + return (($val =~ /^\d+$/ && $val) || # section.key = 1 ($val =~ /^(?:true|yes)$/i)); # section.key = true } @@ -1978,6 +1979,9 @@ sub git_get_project_config { $config_file = "$git_dir/config"; } + # check if config variable (key) exists + return unless exists $config{"gitweb.$key"}; + # ensure given type if (!defined $type) { return $config{"gitweb.$key"}; diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index 7c6f70bbd8..6ed10d0933 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -661,6 +661,11 @@ cat >>gitweb_config.perl <.git/config <<\EOF +# testing noval and alternate separator +[gitweb] + blame + snapshot = zip tgz +EOF +test_expect_success \ + 'config override: tree view, features enabled in repo config (2)' \ + 'gitweb_run "p=.git;a=tree"' +test_debug 'cat gitweb.log' + # ---------------------------------------------------------------------- # non-ASCII in README.html From b94ead75945fe7dbe8fbfeb48070a6b54d02e318 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Wed, 18 Feb 2009 10:48:01 -0800 Subject: [PATCH 096/149] git-svn: fix parsing of timestamp obtained from svn Ward Wouts reports that git-svn barfed like this: Unable to parse date: 2004-03-09T09:44:33.Z at /usr/bin/git-svn line 3995 The parse_svn_date sub expects there always are one or more digits after the decimal point to record fractional seconds, but this example does not and results in a failure like this. The fix is based on the original fix by the reporter, further cleaned up. Signed-off-by: Junio C Hamano Acked-by: Eric Wong --- git-svn.perl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/git-svn.perl b/git-svn.perl index 83cb36f065..cbc5211d58 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -2526,7 +2526,7 @@ sub get_untracked { sub parse_svn_date { my $date = shift || return '+0000 1970-01-01 00:00:00'; my ($Y,$m,$d,$H,$M,$S) = ($date =~ /^(\d{4})\-(\d\d)\-(\d\d)T - (\d\d)\:(\d\d)\:(\d\d).\d+Z$/x) or + (\d\d)\:(\d\d)\:(\d\d)\.\d*Z$/x) or croak "Unable to parse date: $date\n"; my $parsed_date; # Set next. From d61027b21f403a74ba16191756d22717a2e95bd4 Mon Sep 17 00:00:00 2001 From: Michael Spang Date: Wed, 18 Feb 2009 01:48:06 -0500 Subject: [PATCH 097/149] Skip timestamp differences for diff --no-index We display empty diffs for files whose timestamps have changed. Usually, refreshing the index makes those empty diffs go away. However, when not using the index they are not very useful and there is no option to suppress them. This forces on the skip_stat_unmatch option for diff --no-index, suppressing any empty diffs. This option is also used for diffs against the index when "diff.autorefreshindex" is set, but that option does not apply to diff --no-index. Signed-off-by: Michael Spang Signed-off-by: Junio C Hamano --- diff-no-index.c | 1 + t/t4013-diff-various.sh | 5 +++++ t/t4013/diff.diff_--no-index_dir_dir3 | 2 ++ 3 files changed, 8 insertions(+) create mode 100644 t/t4013/diff.diff_--no-index_dir_dir3 diff --git a/diff-no-index.c b/diff-no-index.c index 60ed17470a..2d541d9aba 100644 --- a/diff-no-index.c +++ b/diff-no-index.c @@ -247,6 +247,7 @@ void diff_no_index(struct rev_info *revs, else revs->diffopt.paths = argv + argc - 2; revs->diffopt.nr_paths = 2; + revs->diffopt.skip_stat_unmatch = 1; DIFF_OPT_SET(&revs->diffopt, EXIT_WITH_STATUS); DIFF_OPT_SET(&revs->diffopt, NO_INDEX); diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index aba53202f8..9c709022ef 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -74,6 +74,10 @@ test_expect_success setup ' for i in 1 2; do echo $i; done >>dir/sub && git update-index file0 dir/sub && + mkdir dir3 && + cp dir/sub dir3/sub && + test-chmtime +1 dir3/sub && + git config log.showroot false && git commit --amend && git show-branch @@ -262,6 +266,7 @@ diff --patch-with-raw -r initial..side diff --name-status dir2 dir diff --no-index --name-status dir2 dir diff --no-index --name-status -- dir2 dir +diff --no-index dir dir3 diff master master^ side EOF diff --git a/t/t4013/diff.diff_--no-index_dir_dir3 b/t/t4013/diff.diff_--no-index_dir_dir3 new file mode 100644 index 0000000000..2142c2b9ad --- /dev/null +++ b/t/t4013/diff.diff_--no-index_dir_dir3 @@ -0,0 +1,2 @@ +$ git diff --no-index dir dir3 +$ From 51b2ead03c8cdc0ddeeca2fb5db14b7bac584337 Mon Sep 17 00:00:00 2001 From: Jay Soffian Date: Wed, 18 Feb 2009 08:44:02 -0500 Subject: [PATCH 098/149] disallow providing multiple upstream branches to rebase, pull --rebase It does not make sense to provide multiple upstream branches to either git pull --rebase, or to git rebase, so disallow both. Signed-off-by: Jay Soffian Signed-off-by: Junio C Hamano --- git-pull.sh | 5 +++++ git-rebase.sh | 1 + 2 files changed, 6 insertions(+) diff --git a/git-pull.sh b/git-pull.sh index 2c7f432dc0..25adddfddf 100755 --- a/git-pull.sh +++ b/git-pull.sh @@ -171,6 +171,11 @@ case "$merge_head" in echo >&2 "Cannot merge multiple branches into empty head" exit 1 fi + if test true = "$rebase" + then + echo >&2 "Cannot rebase onto multiple branches" + exit 1 + fi ;; esac diff --git a/git-rebase.sh b/git-rebase.sh index 6d3eddbada..368c0ef434 100755 --- a/git-rebase.sh +++ b/git-rebase.sh @@ -310,6 +310,7 @@ do esac shift done +test $# -gt 2 && usage # Make sure we do not have $GIT_DIR/rebase-apply if test -z "$do_merge" From 88e38808cd52aaed327a82d6a6ffdb8b9da621f2 Mon Sep 17 00:00:00 2001 From: Lars Noschinski Date: Wed, 18 Feb 2009 09:35:36 +0100 Subject: [PATCH 099/149] filter-branch -d: Export GIT_DIR earlier The improved error handling catches a bug in filter-branch when using -d pointing to a path outside any git repository: $ git filter-branch -d /tmp/foo master fatal: Not a git repository (or any of the parent directories): .git This error message comes from git for-each-ref in line 224. GIT_DIR is set correctly by git-sh-setup (to the foo.git repository), but not exported (yet). Signed-off-by: Lars Noschinski Acked-by: Johannes Schindelin Signed-off-by: Junio C Hamano --- git-filter-branch.sh | 12 ++++++------ t/t7003-filter-branch.sh | 12 ++++++++++++ 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/git-filter-branch.sh b/git-filter-branch.sh index 27b57b826a..9a09ba1382 100755 --- a/git-filter-branch.sh +++ b/git-filter-branch.sh @@ -220,6 +220,12 @@ die "" # Remove tempdir on exit trap 'cd ../..; rm -rf "$tempdir"' 0 +ORIG_GIT_DIR="$GIT_DIR" +ORIG_GIT_WORK_TREE="$GIT_WORK_TREE" +ORIG_GIT_INDEX_FILE="$GIT_INDEX_FILE" +GIT_WORK_TREE=. +export GIT_DIR GIT_WORK_TREE + # Make sure refs/original is empty git for-each-ref > "$tempdir"/backup-refs || exit while read sha1 type name @@ -234,12 +240,6 @@ do esac done < "$tempdir"/backup-refs -ORIG_GIT_DIR="$GIT_DIR" -ORIG_GIT_WORK_TREE="$GIT_WORK_TREE" -ORIG_GIT_INDEX_FILE="$GIT_INDEX_FILE" -GIT_WORK_TREE=. -export GIT_DIR GIT_WORK_TREE - # The refs should be updated if their heads were rewritten git rev-parse --no-flags --revs-only --symbolic-full-name \ --default HEAD "$@" > "$tempdir"/raw-heads || exit diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index 56b5eccdb4..329c851685 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -48,6 +48,18 @@ test_expect_success 'result is really identical' ' test $H = $(git rev-parse HEAD) ' +TRASHDIR=$(pwd) +test_expect_success 'correct GIT_DIR while using -d' ' + mkdir drepo && + ( cd drepo && + git init && + test_commit drepo && + git filter-branch -d "$TRASHDIR/dfoo" \ + --index-filter "cp \"$TRASHDIR\"/dfoo/backup-refs \"$TRASHDIR\"" \ + ) && + grep drepo "$TRASHDIR/backup-refs" +' + test_expect_success 'Fail if commit filter fails' ' test_must_fail git filter-branch -f --commit-filter "exit 1" HEAD ' From 91e80b984e0afda37d288e550fb5832d2b71568c Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Wed, 18 Feb 2009 11:17:27 -0800 Subject: [PATCH 100/149] tests: fix "export var=val" Some shells do not like "export var=val"; the right way to write it is to do an assignment and then export just the variable name. Signed-off-by: Junio C Hamano --- t/t9301-fast-export.sh | 4 ++-- t/test-lib.sh | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/t/t9301-fast-export.sh b/t/t9301-fast-export.sh index 9985721055..86c376088c 100755 --- a/t/t9301-fast-export.sh +++ b/t/t9301-fast-export.sh @@ -185,8 +185,8 @@ test_expect_success 'submodule fast-export | fast-import' ' ' -export GIT_AUTHOR_NAME='A U Thor' -export GIT_COMMITTER_NAME='C O Mitter' +GIT_AUTHOR_NAME='A U Thor'; export GIT_AUTHOR_NAME +GIT_COMMITTER_NAME='C O Mitter'; export GIT_COMMITTER_NAME test_expect_success 'setup copies' ' diff --git a/t/test-lib.sh b/t/test-lib.sh index 22ed448d56..fc0e1932e6 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -82,7 +82,7 @@ do -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate) immediate=t; shift ;; -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) - export GIT_TEST_LONG=t; shift ;; + GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;; -h|--h|--he|--hel|--help) help=t; shift ;; -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) From c4ba87a6e2fccbf4d763ed0212a20a784b964ef8 Mon Sep 17 00:00:00 2001 From: Todd Zullinger Date: Wed, 18 Feb 2009 22:51:06 -0500 Subject: [PATCH 101/149] Documentation: Note file formats send-email accepts Signed-off-by: Todd Zullinger Signed-off-by: Junio C Hamano --- Documentation/git-send-email.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index ff4aeff4e6..66bf3b2fcd 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -19,6 +19,19 @@ The header of the email is configurable by command line options. If not specified on the command line, the user will be prompted with a ReadLine enabled interface to provide the necessary information. +There are two formats accepted for patch files: + +1. mbox format files ++ +This is what linkgit:git-format-patch[1] generates. Most headers and MIME +formatting are ignored. + +2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl' +script ++ +This format expects the first line of the file to contain the "Cc:" value +and the "Subject:" of the message as the second line. + OPTIONS ------- From 4fcc86b07db26da17f17af0fd777cab78fcaaf4c Mon Sep 17 00:00:00 2001 From: Johannes Schindelin Date: Thu, 19 Feb 2009 20:10:49 +0100 Subject: [PATCH 102/149] Introduce the function strip_path_suffix() The function strip_path_suffix() will try to strip a given suffix from a given path. The suffix must start at a directory boundary (i.e. "core" is not a path suffix of "libexec/git-core", but "git-core" is). Arbitrary runs of directory separators ("slashes") are assumed identical. Example: strip_path_suffix("C:\\msysgit/\\libexec\\git-core", "libexec///git-core", &prefix) will set prefix to "C:\\msysgit" and return 0. Signed-off-by: Johannes Schindelin Acked-by: Johannes Sixt Signed-off-by: Junio C Hamano --- cache.h | 1 + path.c | 36 ++++++++++++++++++++++++++++++++++++ t/t0060-path-utils.sh | 4 ++++ test-path-utils.c | 6 ++++++ 4 files changed, 47 insertions(+) diff --git a/cache.h b/cache.h index 37dfb1c18f..21bbf9b119 100644 --- a/cache.h +++ b/cache.h @@ -626,6 +626,7 @@ const char *make_nonrelative_path(const char *path); const char *make_relative_path(const char *abs, const char *base); int normalize_path_copy(char *dst, const char *src); int longest_ancestor_length(const char *path, const char *prefix_list); +char *strip_path_suffix(const char *path, const char *suffix); /* Read and unpack a sha1 file into memory, write memory to a sha1 file */ extern int sha1_object_info(const unsigned char *, unsigned long *); diff --git a/path.c b/path.c index 4b9107fed1..e332b504a6 100644 --- a/path.c +++ b/path.c @@ -499,3 +499,39 @@ int longest_ancestor_length(const char *path, const char *prefix_list) return max_len; } + +/* strip arbitrary amount of directory separators at end of path */ +static inline int chomp_trailing_dir_sep(const char *path, int len) +{ + while (len && is_dir_sep(path[len - 1])) + len--; + return len; +} + +/* + * If path ends with suffix (complete path components), returns the + * part before suffix (sans trailing directory separators). + * Otherwise returns NULL. + */ +char *strip_path_suffix(const char *path, const char *suffix) +{ + int path_len = strlen(path), suffix_len = strlen(suffix); + + while (suffix_len) { + if (!path_len) + return NULL; + + if (is_dir_sep(path[path_len - 1])) { + if (!is_dir_sep(suffix[suffix_len - 1])) + return NULL; + path_len = chomp_trailing_dir_sep(path, path_len); + suffix_len = chomp_trailing_dir_sep(suffix, suffix_len); + } + else if (path[--path_len] != suffix[--suffix_len]) + return NULL; + } + + if (path_len && !is_dir_sep(path[path_len - 1])) + return NULL; + return xstrndup(path, chomp_trailing_dir_sep(path, path_len)); +} diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index 4ed1f0b4dd..8336114f98 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -85,4 +85,8 @@ ancestor /foo/bar :://foo/.:: 4 ancestor /foo/bar //foo/./::/bar 4 ancestor /foo/bar ::/bar -1 +test_expect_success 'strip_path_suffix' ' + test c:/msysgit = $(test-path-utils strip_path_suffix \ + c:/msysgit/libexec//git-core libexec/git-core) +' test_done diff --git a/test-path-utils.c b/test-path-utils.c index 5168a8e3df..d261398d6c 100644 --- a/test-path-utils.c +++ b/test-path-utils.c @@ -26,6 +26,12 @@ int main(int argc, char **argv) return 0; } + if (argc == 4 && !strcmp(argv[1], "strip_path_suffix")) { + char *prefix = strip_path_suffix(argv[2], argv[3]); + printf("%s\n", prefix ? prefix : "(null)"); + return 0; + } + fprintf(stderr, "%s: unknown function name: %s\n", argv[0], argv[1] ? argv[1] : "(there was none)"); return 1; From 024aa7d8d5114f76e616a0ed8ddcf3b463ff2c14 Mon Sep 17 00:00:00 2001 From: Johannes Schindelin Date: Thu, 19 Feb 2009 20:10:53 +0100 Subject: [PATCH 103/149] system_path(): simplify using strip_path_suffix(), and add suffix "git" At least for the author of this patch, the logic in system_path() was too hard to understand. Using the function strip_path_suffix() documents the idea of the code better. The real change is to add the suffix "git", so that a runtime prefix will be computed correctly even when the executable was called in /git/ as is the case in msysGit (Windows insists to search the current directory before the PATH when looking for an executable). Signed-off-by: Johannes Schindelin Acked-by: Johannes Sixt Signed-off-by: Junio C Hamano --- exec_cmd.c | 33 ++++----------------------------- 1 file changed, 4 insertions(+), 29 deletions(-) diff --git a/exec_cmd.c b/exec_cmd.c index f234066def..217c12577f 100644 --- a/exec_cmd.c +++ b/exec_cmd.c @@ -23,35 +23,10 @@ const char *system_path(const char *path) assert(argv0_path); assert(is_absolute_path(argv0_path)); - if (!prefix) { - const char *strip[] = { - GIT_EXEC_PATH, - BINDIR, - 0 - }; - const char **s; - - for (s = strip; *s; s++) { - const char *sargv = argv0_path + strlen(argv0_path); - const char *ss = *s + strlen(*s); - while (argv0_path < sargv && *s < ss - && (*sargv == *ss || - (is_dir_sep(*sargv) && is_dir_sep(*ss)))) { - sargv--; - ss--; - } - if (*s == ss) { - struct strbuf d = STRBUF_INIT; - /* We also skip the trailing directory separator. */ - assert(sargv - argv0_path - 1 >= 0); - strbuf_add(&d, argv0_path, sargv - argv0_path - 1); - prefix = strbuf_detach(&d, NULL); - break; - } - } - } - - if (!prefix) { + if (!prefix && + !(prefix = strip_path_suffix(argv0_path, GIT_EXEC_PATH)) && + !(prefix = strip_path_suffix(argv0_path, BINDIR)) && + !(prefix = strip_path_suffix(argv0_path, "git"))) { prefix = PREFIX; fprintf(stderr, "RUNTIME_PREFIX requested, " "but prefix computation failed. " From 7d233dea5f4e299fdac8d6cfb610bcd4d60a82b7 Mon Sep 17 00:00:00 2001 From: "Marcel M. Cary" Date: Tue, 17 Feb 2009 19:00:43 -0800 Subject: [PATCH 104/149] gitweb: Hyperlink multiple git hashes on the same commit message line The current implementation only hyperlinks the first hash on a given line of the commit message. It seems sensible to highlight all of them if there are multiple, and it seems plausible that there would be multiple even with a tidy line length limit, because they can be abbreviated as short as 8 characters. Benchmark: I wanted to make sure that using the 'e' switch to the Perl regex wasn't going to kill performance, since this is called once per commit message line displayed. In all three A/B scenarios I tried, the A and B yielded the same results within 2%, where A is the version of code before this patch and B is the version after. 1: View a commit message containing the last 1000 commit hashes 2: View a commit message containing 1000 lines of 40 dots to avoid hyperlinking at the same message length 3: View a short merge commit message with a few lines of text and no hashes All were run in CGI mode on my sub-production hardware on a recent clone of git.git. Numbers are the average of 10 reqests per second with the first request discarded, since I expect this change to affect primarily CPU usage. Measured with ApacheBench. Note that the web page rendered was the same; while the new code supports multiple hashes per line, there was at most one per line. The primary purpose of scenarios 2 and 3 were to verify that the addition of 1000 commit messages had an impact on how much of the time was spent rendering commit messages. They were all within 2% of 0.80 requests per second (much faster). So I think the patch has no noticeable effect on performance. Signed-off-by: Marcel M. Cary Acked-by: Jakub Narebski Signed-off-by: Junio C Hamano --- gitweb/gitweb.perl | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl index 83858fb8b9..33ef190ceb 100755 --- a/gitweb/gitweb.perl +++ b/gitweb/gitweb.perl @@ -1384,13 +1384,11 @@ sub format_log_line_html { my $line = shift; $line = esc_html($line, -nbsp=>1); - if ($line =~ m/\b([0-9a-fA-F]{8,40})\b/) { - my $hash_text = $1; - my $link = - $cgi->a({-href => href(action=>"object", hash=>$hash_text), - -class => "text"}, $hash_text); - $line =~ s/$hash_text/$link/; - } + $line =~ s{\b([0-9a-fA-F]{8,40})\b}{ + $cgi->a({-href => href(action=>"object", hash=>$1), + -class => "text"}, $1); + }eg; + return $line; } From b452cc16d85ea9de7d3f15c83a917b5534a91120 Mon Sep 17 00:00:00 2001 From: Matthieu Moy Date: Thu, 19 Feb 2009 13:34:48 +0100 Subject: [PATCH 105/149] Document git blame --reverse. This was introduced in 85af7929ee125385c2771fa4eaccfa2f29dc63c9 but not documented outside the commit message. Signed-off-by: Matthieu Moy Signed-off-by: Junio C Hamano --- Documentation/blame-options.txt | 7 +++++++ Documentation/git-blame.txt | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index 1ab1b96cf9..7f28432254 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -41,6 +41,13 @@ of lines before or after the line given by . -S :: Use revs from revs-file instead of calling linkgit:git-rev-list[1]. +--reverse:: + Walk history forward instead of backward. Instead of showing + the revision in which a line appeared, this shows the last + revision in which a line has existed. This requires a range of + revision like START..END where the path to blame exists in + START. + -p:: --porcelain:: Show in a format designed for machine consumption. diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index fba374d652..cc934e55c3 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -10,7 +10,7 @@ SYNOPSIS [verse] 'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-p] [-w] [--incremental] [-L n,m] [-S ] [-M] [-C] [-C] [--since=] - [ | --contents ] [--] + [ | --contents | --reverse ] [--] DESCRIPTION ----------- From e43a6fd3e94888d76779ad79fb568ed180e5fcdf Mon Sep 17 00:00:00 2001 From: Matthieu Moy Date: Thu, 19 Feb 2009 13:54:18 +0100 Subject: [PATCH 106/149] More friendly message when locking the index fails. Just saying that index.lock exists doesn't tell the user _what_ to do to fix the problem. We should give an indication that it's normally safe to delete index.lock after making sure git isn't running here. Signed-off-by: Matthieu Moy Signed-off-by: Junio C Hamano --- builtin-update-index.c | 3 +-- cache.h | 1 + lockfile.c | 16 +++++++++++++++- 3 files changed, 17 insertions(+), 3 deletions(-) diff --git a/builtin-update-index.c b/builtin-update-index.c index 65d5775107..daca0f775e 100644 --- a/builtin-update-index.c +++ b/builtin-update-index.c @@ -742,8 +742,7 @@ int cmd_update_index(int argc, const char **argv, const char *prefix) if (newfd < 0) { if (refresh_flags & REFRESH_QUIET) exit(128); - die("unable to create '%s.lock': %s", - get_index_file(), strerror(lock_error)); + unable_to_lock_index_die(get_index_file(), lock_error); } if (write_cache(newfd, active_cache, active_nr) || commit_locked_index(lock_file)) diff --git a/cache.h b/cache.h index 3a33b1e82b..0e2f219b2b 100644 --- a/cache.h +++ b/cache.h @@ -484,6 +484,7 @@ struct lock_file { }; #define LOCK_DIE_ON_ERROR 1 #define LOCK_NODEREF 2 +extern NORETURN void unable_to_lock_index_die(const char *path, int err); extern int hold_lock_file_for_update(struct lock_file *, const char *path, int); extern int hold_lock_file_for_append(struct lock_file *, const char *path, int); extern int commit_lock_file(struct lock_file *); diff --git a/lockfile.c b/lockfile.c index 8589155532..8e556ff8c9 100644 --- a/lockfile.c +++ b/lockfile.c @@ -158,11 +158,25 @@ static int lock_file(struct lock_file *lk, const char *path, int flags) return lk->fd; } + +NORETURN void unable_to_lock_index_die(const char *path, int err) +{ + if (errno == EEXIST) { + die("Unable to create '%s.lock': %s.\n\n" + "If no other git process is currently running, this probably means a\n" + "git process crashed in this repository earlier. Make sure no other git\n" + "process is running and remove the file manually to continue.", + path, strerror(err)); + } else { + die("Unable to create '%s.lock': %s", path, strerror(err)); + } +} + int hold_lock_file_for_update(struct lock_file *lk, const char *path, int flags) { int fd = lock_file(lk, path, flags); if (fd < 0 && (flags & LOCK_DIE_ON_ERROR)) - die("unable to create '%s.lock': %s", path, strerror(errno)); + unable_to_lock_index_die(path, errno); return fd; } From 7dff9b30ea0603fe265f9f7da055fc34f5d57d2f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Feb 2009 14:15:22 -0800 Subject: [PATCH 107/149] Support 'raw' date format Talking about --date, one thing I wanted for the 1234567890 date was to get things in the raw format. Sure, you get them with --pretty=raw, but it felt a bit sad that you couldn't just ask for the date in raw format. So here's a throw-away patch (meaning: I won't be re-sending it, because I really don't think it's a big deal) to add "--date=raw". It just prints out the internal raw git format - seconds since epoch plus timezone (put another way: 'date +"%s %z"' format) Signed-off-by: Linus Torvalds Signed-off-by: Junio C Hamano --- Documentation/rev-list-options.txt | 4 +++- cache.h | 3 ++- date.c | 7 +++++++ 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index b9f6e4d1b7..5076322877 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -13,7 +13,7 @@ include::pretty-options.txt[] Synonym for `--date=relative`. ---date={relative,local,default,iso,rfc,short}:: +--date={relative,local,default,iso,rfc,short,raw}:: Only takes effect for dates shown in human-readable format, such as when using "--pretty". `log.date` config variable sets a default @@ -31,6 +31,8 @@ format, often found in E-mail messages. + `--date=short` shows only date but not time, in `YYYY-MM-DD` format. + +`--date=raw` shows the date in the internal raw git format `%s %z` format. ++ `--date=default` shows timestamps in the original timezone (either committer's or author's). diff --git a/cache.h b/cache.h index 21a63103d5..189151de25 100644 --- a/cache.h +++ b/cache.h @@ -696,7 +696,8 @@ enum date_mode { DATE_SHORT, DATE_LOCAL, DATE_ISO8601, - DATE_RFC2822 + DATE_RFC2822, + DATE_RAW }; const char *show_date(unsigned long time, int timezone, enum date_mode mode); diff --git a/date.c b/date.c index 950b88fdcf..d75dff4240 100644 --- a/date.c +++ b/date.c @@ -89,6 +89,11 @@ const char *show_date(unsigned long time, int tz, enum date_mode mode) struct tm *tm; static char timebuf[200]; + if (mode == DATE_RAW) { + snprintf(timebuf, sizeof(timebuf), "%lu %+05d", time, tz); + return timebuf; + } + if (mode == DATE_RELATIVE) { unsigned long diff; struct timeval now; @@ -615,6 +620,8 @@ enum date_mode parse_date_format(const char *format) return DATE_LOCAL; else if (!strcmp(format, "default")) return DATE_NORMAL; + else if (!strcmp(format, "raw")) + return DATE_RAW; else die("unknown date format %s", format); } From 21ba0e84356cb73faecc4c5bf30df7b2222961d2 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Mon, 16 Feb 2009 11:39:11 +0100 Subject: [PATCH 108/149] git.el: Make sure that file lists are sorted as they are created. This avoids a possibly redundant sort in git-update-status-files and git-status-filenames-map, and allows callers to continue using the list without having to copy it. It also fixes the confusing success messages reported by Brent Goodrick. Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index fcbe2d9cf5..c7d15eb4dc 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -530,9 +530,9 @@ Each entry is a cons of (SHORT-NAME . FULL-NAME)." (git-fileinfo->needs-refresh info) t))) (defun git-status-filenames-map (status func files &rest args) - "Apply FUNC to the status files names in the FILES list." + "Apply FUNC to the status files names in the FILES list. +The list must be sorted." (when files - (setq files (sort files #'string-lessp)) (let ((file (pop files)) (node (ewoc-nth status 0))) (while (and file node) @@ -545,7 +545,7 @@ Each entry is a cons of (SHORT-NAME . FULL-NAME)." (setq file (pop files)))))))) (defun git-set-filenames-state (status files state) - "Set the state of a list of named files." + "Set the state of a list of named files. The list must be sorted" (when files (git-status-filenames-map status #'git-set-fileinfo-state files state) (unless state ;; delete files whose state has been set to nil @@ -750,6 +750,7 @@ Return the list of files that haven't been handled." (let (unmerged-files) (while (re-search-forward "[0-7]\\{6\\} [0-9a-f]\\{40\\} [123]\t\\([^\0]+\\)\0" nil t) (push (match-string 1) unmerged-files)) + (setq unmerged-files (nreverse unmerged-files)) ;; assume it is sorted already (git-set-filenames-state status unmerged-files 'unmerged)))) (defun git-get-exclude-files () @@ -770,17 +771,18 @@ Return the list of files that haven't been handled." (append options (mapcar (lambda (f) (concat "--exclude-from=" f)) exclude-files))))) (defun git-update-status-files (&optional files mark-files) - "Update the status of FILES from the index." + "Update the status of FILES from the index. +The FILES list must be sorted." (unless git-status (error "Not in git-status buffer.")) ;; set the needs-update flag on existing files - (if (setq files (sort files #'string-lessp)) + (if files (git-status-filenames-map git-status (lambda (info) (setf (git-fileinfo->needs-update info) t)) files) (ewoc-map (lambda (info) (setf (git-fileinfo->needs-update info) t) nil) git-status) (git-call-process nil "update-index" "--refresh") (when git-show-uptodate (git-run-ls-files-cached git-status nil 'uptodate))) - (let* ((remaining-files + (let ((remaining-files (if (git-empty-db-p) ; we need some special handling for an empty db (git-run-ls-files-cached git-status files 'added) (git-run-diff-index git-status files)))) @@ -825,13 +827,13 @@ Return the list of files that haven't been handled." (list (ewoc-data (ewoc-locate git-status))))) (defun git-marked-files-state (&rest states) - "Return marked files that are in the specified states." + "Return a sorted list of marked files that are in the specified states." (let ((files (git-marked-files)) result) (dolist (info files) (when (memq (git-fileinfo->state info) states) (push info result))) - result)) + (nreverse result))) (defun git-refresh-files () "Refresh all files that need it and clear the needs-refresh flag." @@ -1101,13 +1103,14 @@ Return the list of files that haven't been handled." (or (not added) (apply 'git-call-process-display-error "update-index" "--force-remove" "--" added)) (or (not modified) - (apply 'git-call-process-display-error "checkout" "HEAD" modified))))) - (git-update-status-files (append added modified)) + (apply 'git-call-process-display-error "checkout" "HEAD" modified)))) + (names (git-get-filenames files))) + (git-update-status-files names) (when ok (dolist (file modified) (let ((buffer (get-file-buffer file))) (when buffer (with-current-buffer buffer (revert-buffer t t t))))) - (git-success-message "Reverted" (git-get-filenames files))))))) + (git-success-message "Reverted" names)))))) (defun git-resolve-file () "Resolve conflicts in marked file(s)." @@ -1365,14 +1368,14 @@ Return the list of files that haven't been handled." (mapconcat #'identity msg "\n")))) (defun git-get-commit-files (commit) - "Retrieve the list of files modified by COMMIT." + "Retrieve a sorted list of files modified by COMMIT." (let (files) (with-temp-buffer (git-call-process t "diff-tree" "-m" "-r" "-z" "--name-only" "--no-commit-id" "--root" commit) (goto-char (point-min)) (while (re-search-forward "\\([^\0]*\\)\0" nil t 1) (push (match-string 1) files))) - files)) + (sort files #'string-lessp))) (defun git-read-commit-name (prompt &optional default) "Ask for a commit name, with completion for local branch, remote branch and tag." From 5b4e44104ea9f933e461ed7d3ce4a05a00d95dbb Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Mon, 16 Feb 2009 11:40:08 +0100 Subject: [PATCH 109/149] git.el: Improve the confirmation message on remove and revert. If there's only one file, print its name instead of just "1 file". Signed-off-by: Alexandre Julliard --- contrib/emacs/git.el | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index c7d15eb4dc..eace9c18eb 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1068,7 +1068,9 @@ The FILES list must be sorted." (unless files (push (file-relative-name (read-file-name "File to remove: " nil nil t)) files)) (if (yes-or-no-p - (format "Remove %d file%s? " (length files) (if (> (length files) 1) "s" ""))) + (if (cdr files) + (format "Remove %d files? " (length files)) + (format "Remove %s? " (car files)))) (progn (dolist (name files) (ignore-errors @@ -1087,7 +1089,9 @@ The FILES list must be sorted." added modified) (when (and files (yes-or-no-p - (format "Revert %d file%s? " (length files) (if (> (length files) 1) "s" "")))) + (if (cdr files) + (format "Revert %d files? " (length files)) + (format "Revert %s? " (git-fileinfo->name (car files)))))) (dolist (info files) (case (git-fileinfo->state info) ('added (push (git-fileinfo->name info) added)) From 6f3c504b54e93772e875b6210fe69ecbad978e78 Mon Sep 17 00:00:00 2001 From: Alexandre Julliard Date: Mon, 16 Feb 2009 11:40:29 +0100 Subject: [PATCH 110/149] Add a README in the contrib/emacs directory. Signed-off-by: Alexandre Julliard --- contrib/emacs/README | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 contrib/emacs/README diff --git a/contrib/emacs/README b/contrib/emacs/README new file mode 100644 index 0000000000..82368bdbff --- /dev/null +++ b/contrib/emacs/README @@ -0,0 +1,39 @@ +This directory contains various modules for Emacs support. + +To make the modules available to Emacs, you should add this directory +to your load-path, and then require the modules you want. This can be +done by adding to your .emacs something like this: + + (add-to-list 'load-path ".../git/contrib/emacs") + (require 'git) + (require 'git-blame) + + +The following modules are available: + +* git.el: + + Status manager that displays the state of all the files of the + project, and provides easy access to the most frequently used git + commands. The user interface is as far as possible compatible with + the pcl-cvs mode. It can be started with `M-x git-status'. + +* git-blame.el: + + Emacs implementation of incremental git-blame. When you turn it on + while viewing a file, the editor buffer will be updated by setting + the background of individual lines to a color that reflects which + commit it comes from. And when you move around the buffer, a + one-line summary will be shown in the echo area. + +* vc-git.el: + + This file used to contain the VC-mode backend for git, but it is no + longer distributed with git. It is now maintained as part of Emacs + and included in standard Emacs distributions starting from version + 22.2. + + If you have an earlier Emacs version, upgrading to Emacs 22 is + recommended, since the VC mode in older Emacs is not generic enough + to be able to support git in a reasonable manner, and no attempt has + been made to backport vc-git.el. From 7d9fd459f1f5064b421837e46fe87118a07f6d6c Mon Sep 17 00:00:00 2001 From: Brian Gernhardt Date: Thu, 19 Feb 2009 13:08:04 -0500 Subject: [PATCH 111/149] git-svn: Create leading directories in create-ignore Since SVN tracks empty directories and git does not, we can not assume that the directory exists when creating .gitignore files. Signed-off-by: Brian Gernhardt Acked-by: Eric Wong --- git-svn.perl | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/git-svn.perl b/git-svn.perl index cbc5211d58..ef01fb93c2 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -670,7 +670,11 @@ sub cmd_create_ignore { $gs->prop_walk($gs->{path}, $r, sub { my ($gs, $path, $props) = @_; # $path is of the form /path/to/dir/ - my $ignore = '.' . $path . '.gitignore'; + $path = '.' . $path; + # SVN can have attributes on empty directories, + # which git won't track + mkpath([$path]) unless -d $path; + my $ignore = $path . '.gitignore'; my $s = $props->{'svn:ignore'} or return; open(GITIGNORE, '>', $ignore) or fatal("Failed to open `$ignore' for writing: $!"); From 83c2fcff214fe89649fcd88e095d9961a36b53dd Mon Sep 17 00:00:00 2001 From: Eric Wong Date: Sun, 22 Feb 2009 20:25:00 -0800 Subject: [PATCH 112/149] git-svn: fix delete+add branch tracking with empty files MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Original bug report and test case by Björn Steinbrink. Björn Steinbrink wrote: > Hi Eric, > > seems that the empty symlink stuff gets confused about which revision to > use when looking for the parent's file. > > r3 = f1a6fcf6b0a1c4a373d0b2b65a3d70700084f361 (tags/1.0.1) > Found possible branch point: file:///home/doener/h/svn/tags/1.0 => file:///home/doener/h/svn/branches/1.0, 4 > Found branch parent: (1.0) 63ae640ba01014ecbb3df590999ed1fa5914545b > Following parent with do_switch > Successfully followed parent > r5 = 26fcfef5bcced97ab74faf1af7341a2ae0d272aa (1.0) > Found possible branch point: file:///home/doener/h/svn/branches/1.0 => file:///home/doener/h/svn/tags/1.0.1, 5 > Found branch parent: (tags/1.0.1) 26fcfef5bcced97ab74faf1af7341a2ae0d272aa > Following parent with do_switch > Scanning for empty symlinks, this may take a while if you have many empty files > You may disable this with `git config svn.brokenSymlinkWorkaround false'. > This may be done in a different terminal without restarting git svn > Filesystem has no item: File not found: revision 3, path '/branches/1.0/file' at /usr/local/libexec/git-core/git-svn line 3318 > > Note how it tries to look at revision 3 instead of revision 5 (which it > correctly detected as the parent). The import succeeds when > svn.brokenSymlinkWorkaround is set to false. Testcase below. Signed-off-by: Eric Wong --- git-svn.perl | 1 + ...136-git-svn-recreated-branch-empty-file.sh | 12 ++ t/t9136/svn.dump | 192 ++++++++++++++++++ 3 files changed, 205 insertions(+) create mode 100755 t/t9136-git-svn-recreated-branch-empty-file.sh create mode 100644 t/t9136/svn.dump diff --git a/git-svn.perl b/git-svn.perl index ef01fb93c2..bce24a80c4 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -2421,6 +2421,7 @@ sub find_parent_branch { # do_switch works with svn/trunk >= r22312, but that # is not included with SVN 1.4.3 (the latest version # at the moment), so we can't rely on it + $self->{last_rev} = $r0; $self->{last_commit} = $parent; $ed = SVN::Git::Fetcher->new($self, $gs->{path}); $gs->ra->gs_do_switch($r0, $rev, $gs, diff --git a/t/t9136-git-svn-recreated-branch-empty-file.sh b/t/t9136-git-svn-recreated-branch-empty-file.sh new file mode 100755 index 0000000000..733d16e0b2 --- /dev/null +++ b/t/t9136-git-svn-recreated-branch-empty-file.sh @@ -0,0 +1,12 @@ +#!/bin/sh + +test_description='test recreated svn branch with empty files' + +. ./lib-git-svn.sh +test_expect_success 'load svn dumpfile' ' + svnadmin load "$rawsvnrepo" < "${TEST_DIRECTORY}/t9136/svn.dump" + ' + +test_expect_success 'clone using git svn' 'git svn clone -s "$svnrepo" x' + +test_done diff --git a/t/t9136/svn.dump b/t/t9136/svn.dump new file mode 100644 index 0000000000..6b1ce0b2e8 --- /dev/null +++ b/t/t9136/svn.dump @@ -0,0 +1,192 @@ +SVN-fs-dump-format-version: 2 + +UUID: eecae021-8f16-48da-969d-79beb8ae6ea5 + +Revision-number: 0 +Prop-content-length: 56 +Content-length: 56 + +K 8 +svn:date +V 27 +2009-02-22T00:50:56.292890Z +PROPS-END + +Revision-number: 1 +Prop-content-length: 106 +Content-length: 106 + +K 7 +svn:log +V 4 +init +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-22T00:50:57.192384Z +PROPS-END + +Node-path: branches +Node-kind: dir +Node-action: add +Prop-content-length: 10 +Content-length: 10 + +PROPS-END + + +Node-path: tags +Node-kind: dir +Node-action: add +Prop-content-length: 10 +Content-length: 10 + +PROPS-END + + +Node-path: trunk +Node-kind: dir +Node-action: add +Prop-content-length: 10 +Content-length: 10 + +PROPS-END + + +Node-path: trunk/file +Node-kind: file +Node-action: add +Prop-content-length: 10 +Text-content-length: 0 +Text-content-md5: d41d8cd98f00b204e9800998ecf8427e +Content-length: 10 + +PROPS-END + + +Revision-number: 2 +Prop-content-length: 105 +Content-length: 105 + +K 7 +svn:log +V 3 +1.0 +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-22T00:50:58.124724Z +PROPS-END + +Node-path: tags/1.0 +Node-kind: dir +Node-action: add +Node-copyfrom-rev: 1 +Node-copyfrom-path: trunk + + +Revision-number: 3 +Prop-content-length: 111 +Content-length: 111 + +K 7 +svn:log +V 9 +1.0.1-bad +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-22T00:50:58.151727Z +PROPS-END + +Node-path: tags/1.0.1 +Node-kind: dir +Node-action: add +Node-copyfrom-rev: 2 +Node-copyfrom-path: tags/1.0 + + +Revision-number: 4 +Prop-content-length: 111 +Content-length: 111 + +K 7 +svn:log +V 9 +Wrong tag +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-22T00:50:58.167427Z +PROPS-END + +Node-path: tags/1.0.1 +Node-action: delete + + +Revision-number: 5 +Prop-content-length: 113 +Content-length: 113 + +K 7 +svn:log +V 10 +1.0-branch +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-22T00:50:58.184498Z +PROPS-END + +Node-path: branches/1.0 +Node-kind: dir +Node-action: add +Node-copyfrom-rev: 4 +Node-copyfrom-path: tags/1.0 + + +Revision-number: 6 +Prop-content-length: 113 +Content-length: 113 + +K 7 +svn:log +V 10 +1.0.1-good +K 10 +svn:author +V 8 +john.doe +K 8 +svn:date +V 27 +2009-02-22T00:50:58.200695Z +PROPS-END + +Node-path: tags/1.0.1 +Node-kind: dir +Node-action: add +Node-copyfrom-rev: 5 +Node-copyfrom-path: branches/1.0 + + From 0df84059d4127ed06e040998ec0e6ce6f61d3d1f Mon Sep 17 00:00:00 2001 From: Peter Oberndorfer Date: Mon, 23 Feb 2009 12:02:53 +0100 Subject: [PATCH 113/149] git-svn: read the dcommit url from the config file on a per remote basis The commit url for dcommit is determined in the following order: commandline option --commit-url svn.commiturl svn-remote..commiturl svn-remote..url Signed-off-by: Peter Oberndorfer Acked-by: Eric Wong --- Documentation/git-svn.txt | 4 ++++ git-svn.perl | 12 +++++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 3d456545d7..cda3389331 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -169,6 +169,10 @@ and have no uncommitted changes. reused if a user is later given access to an alternate transport method (e.g. `svn+ssh://` or `https://`) for commit. +config key: svn-remote..commiturl + +config key: svn.commiturl (overwrites all svn-remote..commiturl options) + Using this option for any other purpose (don't ask) is very strongly discouraged. -- diff --git a/git-svn.perl b/git-svn.perl index bce24a80c4..d8476c81ee 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -438,7 +438,17 @@ sub cmd_dcommit { die "Unable to determine upstream SVN information from ", "$head history.\nPerhaps the repository is empty."; } - $url = defined $_commit_url ? $_commit_url : $gs->full_url; + + if (defined $_commit_url) { + $url = $_commit_url; + } else { + $url = eval { command_oneline('config', '--get', + "svn-remote.$gs->{repo_id}.commiturl") }; + if (!$url) { + $url = $gs->full_url + } + } + my $last_rev = $_revision if defined $_revision; if ($url) { print "Committing to $url ...\n"; From b4b0ba06f8748348039d56ffa5890590dd9776ee Mon Sep 17 00:00:00 2001 From: Pete Wyckoff Date: Wed, 18 Feb 2009 13:12:14 -0500 Subject: [PATCH 114/149] git-p4: avoid syncing duplicate changes When a particular changeset affects multiple depot paths, it will appear multiple times in the output of "p4 changes". Filter out the duplicates to avoid the extra empty commits that this otherwise would create. Signed-off-by: Pete Wyckoff Acked-by: Simon Hausmann Signed-off-by: Junio C Hamano --- contrib/fast-import/git-p4 | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4 index a85a7b2a58..3832f60225 100755 --- a/contrib/fast-import/git-p4 +++ b/contrib/fast-import/git-p4 @@ -442,13 +442,14 @@ def p4ChangesForPaths(depotPaths, changeRange): output = p4_read_pipe_lines("changes " + ' '.join (["%s...%s" % (p, changeRange) for p in depotPaths])) - changes = [] + changes = {} for line in output: - changeNum = line.split(" ")[1] - changes.append(int(changeNum)) + changeNum = int(line.split(" ")[1]) + changes[changeNum] = True - changes.sort() - return changes + changelist = changes.keys() + changelist.sort() + return changelist class Command: def __init__(self): From e871784132038a500f3390859da3bbe95b9a0fc2 Mon Sep 17 00:00:00 2001 From: Ben Walton Date: Tue, 24 Feb 2009 14:44:49 -0500 Subject: [PATCH 115/149] git-svn fix to avoid using strftime %z %z isn't available on all platforms in the date formatting routines. Provide a workalike capability that should be more portable. Signed-off-by: Ben Walton Acked-by: Eric Wong --- git-svn.perl | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/git-svn.perl b/git-svn.perl index d8476c81ee..d967594ee7 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -4630,6 +4630,7 @@ package Git::SVN::Log; use strict; use warnings; use POSIX qw/strftime/; +use Time::Local; use constant commit_log_separator => ('-' x 72) . "\n"; use vars qw/$TZ $limit $color $pager $non_recursive $verbose $oneline %rusers $show_commit $incremental/; @@ -4736,7 +4737,12 @@ sub run_pager { } sub format_svn_date { - return strftime("%Y-%m-%d %H:%M:%S %z (%a, %d %b %Y)", localtime(shift)); + # some systmes don't handle or mishandle %z, so be creative. + my $t = shift; + my $gm = timelocal(gmtime($t)); + my $sign = qw( + + - )[ $t <=> $gm ]; + my $gmoff = sprintf("%s%02d%02d", $sign, (gmtime(abs($t - $gm)))[2,1]); + return strftime("%Y-%m-%d %H:%M:%S $gmoff (%a, %d %b %Y)", localtime($t)); } sub parse_git_date { From 3ca936422212370481850d67cab80b1e517b2d80 Mon Sep 17 00:00:00 2001 From: Abhijit Menon-Sen Date: Wed, 25 Feb 2009 08:33:14 +0530 Subject: [PATCH 116/149] Convert git-* invocations to "git *" in the svnimport example. After these changes, git-svnimport worked fine for me. Signed-off-by: Abhijit Menon-Sen Signed-off-by: Junio C Hamano --- contrib/examples/git-svnimport.perl | 36 ++++++++++++++--------------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/contrib/examples/git-svnimport.perl b/contrib/examples/git-svnimport.perl index a13bb6afec..4576c4a862 100755 --- a/contrib/examples/git-svnimport.perl +++ b/contrib/examples/git-svnimport.perl @@ -287,9 +287,9 @@ my $last_rev = ""; my $last_branch; my $current_rev = $opt_s || 1; unless(-d $git_dir) { - system("git-init"); + system("git init"); die "Cannot init the GIT db at $git_tree: $?\n" if $?; - system("git-read-tree"); + system("git read-tree"); die "Cannot init an empty tree: $?\n" if $?; $last_branch = $opt_o; @@ -303,7 +303,7 @@ unless(-d $git_dir) { -f "$git_dir/svn2git" or die "'$git_dir/svn2git' does not exist.\n". "You need that file for incremental imports.\n"; - open(F, "git-symbolic-ref HEAD |") or + open(F, "git symbolic-ref HEAD |") or die "Cannot run git-symbolic-ref: $!\n"; chomp ($last_branch = ); $last_branch = basename($last_branch); @@ -331,7 +331,7 @@ EOM "$git_dir/refs/heads/$opt_o") == 0; # populate index - system('git-read-tree', $last_rev); + system('git', 'read-tree', $last_rev); die "read-tree failed: $?\n" if $?; # Get the last import timestamps @@ -399,7 +399,7 @@ sub get_file($$$) { my $pid = open(my $F, '-|'); die $! unless defined $pid; if (!$pid) { - exec("git-hash-object", "-w", $name) + exec("git", "hash-object", "-w", $name) or die "Cannot create object: $!\n"; } my $sha = <$F>; @@ -423,7 +423,7 @@ sub get_ignore($$$$$) { my $pid = open(my $F, '-|'); die $! unless defined $pid; if (!$pid) { - exec("git-hash-object", "-w", $name) + exec("git", "hash-object", "-w", $name) or die "Cannot create object: $!\n"; } my $sha = <$F>; @@ -547,7 +547,7 @@ sub copy_path($$$$$$$$) { my $pid = open my $f,'-|'; die $! unless defined $pid; if (!$pid) { - exec("git-ls-tree","-r","-z",$gitrev,$srcpath) + exec("git","ls-tree","-r","-z",$gitrev,$srcpath) or die $!; } local $/ = "\0"; @@ -634,7 +634,7 @@ sub commit { my $rev; if($revision > $opt_s and defined $parent) { - open(H,'-|',"git-rev-parse","--verify",$parent); + open(H,'-|',"git","rev-parse","--verify",$parent); $rev = ; close(H) or do { print STDERR "$revision: cannot find commit '$parent'!\n"; @@ -671,7 +671,7 @@ sub commit { unlink($git_index); } elsif ($rev ne $last_rev) { print "Switching from $last_rev to $rev ($branch)\n" if $opt_v; - system("git-read-tree", $rev); + system("git", "read-tree", $rev); die "read-tree failed for $rev: $?\n" if $?; $last_rev = $rev; } @@ -740,7 +740,7 @@ sub commit { my $pid = open my $F, "-|"; die "$!" unless defined $pid; if (!$pid) { - exec("git-ls-files", "-z", @o1) or die $!; + exec("git", "ls-files", "-z", @o1) or die $!; } @o1 = (); local $/ = "\0"; @@ -758,7 +758,7 @@ sub commit { @o2 = @o1; @o1 = (); } - system("git-update-index","--force-remove","--",@o2); + system("git","update-index","--force-remove","--",@o2); die "Cannot remove files: $?\n" if $?; } } @@ -770,7 +770,7 @@ sub commit { @n2 = @new; @new = (); } - system("git-update-index","--add", + system("git","update-index","--add", (map { ('--cacheinfo', @$_) } @n2)); die "Cannot add files: $?\n" if $?; } @@ -778,7 +778,7 @@ sub commit { my $pid = open(C,"-|"); die "Cannot fork: $!" unless defined $pid; unless($pid) { - exec("git-write-tree"); + exec("git","write-tree"); die "Cannot exec git-write-tree: $!\n"; } chomp(my $tree = ); @@ -830,7 +830,7 @@ sub commit { "GIT_COMMITTER_NAME=$committer_name", "GIT_COMMITTER_EMAIL=$committer_email", "GIT_COMMITTER_DATE=".strftime("+0000 %Y-%m-%d %H:%M:%S",gmtime($date)), - "git-commit-tree", $tree,@par); + "git", "commit-tree", $tree,@par); die "Cannot exec git-commit-tree: $!\n"; } $pw->writer(); @@ -874,7 +874,7 @@ sub commit { $dest =~ tr/_/\./ if $opt_u; - system('git-tag', '-f', $dest, $cid) == 0 + system('git', 'tag', '-f', $dest, $cid) == 0 or die "Cannot create tag $dest: $!\n"; print "Created tag '$dest' on '$branch'\n" if $opt_v; @@ -937,7 +937,7 @@ while ($to_rev < $opt_l) { my $pid = fork(); die "Fork: $!\n" unless defined $pid; unless($pid) { - exec("git-repack", "-d") + exec("git", "repack", "-d") or die "Cannot repack: $!\n"; } waitpid($pid, 0); @@ -958,7 +958,7 @@ if($orig_branch) { system("cp","$git_dir/refs/heads/$opt_o","$git_dir/refs/heads/master") if $forward_master; unless ($opt_i) { - system('git-read-tree', '-m', '-u', 'SVN2GIT_HEAD', 'HEAD'); + system('git', 'read-tree', '-m', '-u', 'SVN2GIT_HEAD', 'HEAD'); die "read-tree failed: $?\n" if $?; } } else { @@ -966,7 +966,7 @@ if($orig_branch) { print "DONE; creating $orig_branch branch\n" if $opt_v and (not defined $opt_l or $opt_l > 0); system("cp","$git_dir/refs/heads/$opt_o","$git_dir/refs/heads/master") unless -f "$git_dir/refs/heads/master"; - system('git-update-ref', 'HEAD', "$orig_branch"); + system('git', 'update-ref', 'HEAD', "$orig_branch"); unless ($opt_i) { system('git checkout'); die "checkout failed: $?\n" if $?; From 6a0861a8a3295395238c8126c6e74c66b715c595 Mon Sep 17 00:00:00 2001 From: Gerrit Pape Date: Tue, 24 Feb 2009 08:58:16 +0000 Subject: [PATCH 117/149] Install builtins with the user and group of the installing personality If 'make install' was run with sufficient privileges, then the installed builtins in gitexecdir, which are either hardlinked, symlinked, or copied, would receive the user and group of whoever built git. With this commit the initial hardlink or copy is done from the installation tree and not the build tree to fix this. Signed-off-by: Gerrit Pape Signed-off-by: Junio C Hamano --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index b040a96e50..0675c43e73 100644 --- a/Makefile +++ b/Makefile @@ -1468,8 +1468,8 @@ endif bindir=$$(cd '$(DESTDIR_SQ)$(bindir_SQ)' && pwd) && \ execdir=$$(cd '$(DESTDIR_SQ)$(gitexec_instdir_SQ)' && pwd) && \ { $(RM) "$$execdir/git-add$X" && \ - ln git-add$X "$$execdir/git-add$X" 2>/dev/null || \ - cp git-add$X "$$execdir/git-add$X"; } && \ + ln "$$bindir/git$X" "$$execdir/git-add$X" 2>/dev/null || \ + cp "$$bindir/git$X" "$$execdir/git-add$X"; } && \ { for p in $(filter-out git-add$X,$(BUILT_INS)); do \ $(RM) "$$execdir/$$p" && \ ln "$$execdir/git-add$X" "$$execdir/$$p" 2>/dev/null || \ From 6ab149ea89fe5790630c5750af0e3245a7a5e06e Mon Sep 17 00:00:00 2001 From: Gerrit Pape Date: Tue, 24 Feb 2009 09:00:06 +0000 Subject: [PATCH 118/149] git-quiltimport: preserve standard input to be able to read user input MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When run without --author and it fails to determine an author, git quiltimport tries `read patch_author` to get user input, but standard input has been redirected to the patch series file. This commit lets quiltimport read the series file through file descriptor 3 so that the standard input is preserved. Reported by Uwe Kleine-König through http://bugs.debian.org/515910 Signed-off-by: Gerrit Pape Signed-off-by: Junio C Hamano --- git-quiltimport.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/git-quiltimport.sh b/git-quiltimport.sh index cebaee1cc9..9a6ba2b987 100755 --- a/git-quiltimport.sh +++ b/git-quiltimport.sh @@ -63,7 +63,7 @@ tmp_info="$tmp_dir/info" commit=$(git rev-parse HEAD) mkdir $tmp_dir || exit 2 -while read patch_name level garbage +while read patch_name level garbage <&3 do case "$patch_name" in ''|'#'*) continue;; esac case "$level" in @@ -134,5 +134,5 @@ do commit=$( (echo "$SUBJECT"; echo; cat "$tmp_msg") | git commit-tree $tree -p $commit) && git update-ref -m "quiltimport: $patch_name" HEAD $commit || exit 4 fi -done <"$QUILT_PATCHES/series" +done 3<"$QUILT_PATCHES/series" rm -rf $tmp_dir || exit 5 From 149f6ddfb324b677472192d4aa1ddc350cf49e80 Mon Sep 17 00:00:00 2001 From: Marc Branchaud Date: Thu, 19 Feb 2009 12:39:47 -0500 Subject: [PATCH 119/149] Docs: Expand explanation of the use of + in git push refspecs. Signed-off-by: Marc Branchaud Signed-off-by: Junio C Hamano --- Documentation/git-push.txt | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index ac6421178c..4e7e5a719a 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -48,17 +48,19 @@ push. Arbitrary expressions cannot be used here, an actual ref must be named. If `:` is omitted, the same ref as will be updated. + -The object referenced by is used to fast forward the ref -on the remote side. If the optional leading plus `{plus}` is used, the -remote ref is updated even if it does not result in a fast forward -update. +The object referenced by is used to update the reference +on the remote side, but by default this is only allowed if the +update can fast forward . By having the optional leading `{plus}`, +you can tell git to update the ref even when the update is not a +fast forward. This does *not* attempt to merge into . See +EXAMPLES below for details. + `tag ` means the same as `refs/tags/:refs/tags/`. + Pushing an empty allows you to delete the ref from the remote repository. + -The special refspec `:` (or `+:` to allow non-fast forward updates) +The special refspec `:` (or `{plus}:` to allow non-fast forward updates) directs git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default operation mode @@ -218,6 +220,30 @@ git push origin :experimental:: Find a ref that matches `experimental` in the `origin` repository (e.g. `refs/heads/experimental`), and delete it. +git push origin {plus}dev:master:: + Update the origin repository's master branch with the dev branch, + allowing non-fast forward updates. *This can leave unreferenced + commits dangling in the origin repository.* Consider the + following situation, where a fast forward is not possible: ++ +---- + o---o---o---A---B origin/master + \ + X---Y---Z dev +---- ++ +The above command would change the origin repository to ++ +---- + A---B (unnamed branch) + / + o---o---o---X---Y---Z master +---- ++ +Commits A and B would no longer belong to a branch with a symbolic name, +and so would be unreachable. As such, these commits would be removed by +a `git gc` command on the origin repository. + Author ------ From a8fdab08e09bf73cbc3159930af41cf3233be853 Mon Sep 17 00:00:00 2001 From: Allan Caffee Date: Tue, 24 Feb 2009 20:22:20 -0500 Subject: [PATCH 120/149] trace: Fixed a minor typo in an error message. Signed-off-by: Allan Caffee Signed-off-by: Junio C Hamano --- trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/trace.c b/trace.c index 4713f9165c..4229ae1231 100644 --- a/trace.c +++ b/trace.c @@ -50,7 +50,7 @@ static int get_trace_fd(int *need_close) return fd; } - fprintf(stderr, "What does '%s' for GIT_TRACE means ?\n", trace); + fprintf(stderr, "What does '%s' for GIT_TRACE mean?\n", trace); fprintf(stderr, "If you want to trace into a file, " "then please set GIT_TRACE to an absolute pathname " "(starting with /).\n"); From aa98eb3d6581a123852e4e080011acc3a61bc556 Mon Sep 17 00:00:00 2001 From: Christian Couder Date: Tue, 24 Feb 2009 21:16:37 +0100 Subject: [PATCH 121/149] README: fix path to "gitcvs-migration.txt" and be more consistent README suggested to look at "Documentation/gittutorial.txt" for the tutorial and to use "man git-commandname" for documentation of each command. This was not consistent because the tutorial can also be available with "man gittutorial" once git is installed, and the documentation for each command can be available at "Documentation/git-commandname.txt" before installing git. This patch tries to make the description more consistent. It also fixes the path to the cvs-migration documentation that changed from "Documentation/cvs-migration.txt" to "Documentation/gitcvs-migration.txt". Signed-off-by: Christian Couder Signed-off-by: Junio C Hamano --- README | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/README b/README index 5fa41b7a18..c932ab3105 100644 --- a/README +++ b/README @@ -24,10 +24,18 @@ It was originally written by Linus Torvalds with help of a group of hackers around the net. It is currently maintained by Junio C Hamano. Please read the file INSTALL for installation instructions. + See Documentation/gittutorial.txt to get started, then see -Documentation/everyday.txt for a useful minimum set of commands, -and "man git-commandname" for documentation of each command. -CVS users may also want to read Documentation/cvs-migration.txt. +Documentation/everyday.txt for a useful minimum set of commands, and +Documentation/git-commandname.txt for documentation of each command. +If git has been correctly installed, then the tutorial can also be +read with "man gittutorial" or "git help tutorial", and the +documentation of each command with "man git-commandname" or "git help +commandname". + +CVS users may also want to read Documentation/gitcvs-migration.txt +("man gitcvs-migration" or "git help cvs-migration" if git is +installed). Many Git online resources are accessible from http://git.or.cz/ including full documentation and Git related tools. From 9ccb3bca5776278aa4c2bd1da41c07edce68dfd1 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Tue, 24 Feb 2009 23:59:03 +0200 Subject: [PATCH 122/149] git add: trivial codestyle cleanup Global static variables don't need to be initialized to 0/NULL. Signed-off-by: Felipe Contreras Signed-off-by: Junio C Hamano --- builtin-add.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/builtin-add.c b/builtin-add.c index ac98c8354d..08443f2f1e 100644 --- a/builtin-add.c +++ b/builtin-add.c @@ -15,7 +15,7 @@ static const char * const builtin_add_usage[] = { "git add [options] [--] ...", NULL }; -static int patch_interactive = 0, add_interactive = 0; +static int patch_interactive, add_interactive; static int take_worktree_changes; static void fill_pathspec_matches(const char **pathspec, char *seen, int specs) From a9d98a148dd5ed14d9e74a1dfc5ec1ca3632f4f0 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Tue, 24 Feb 2009 23:59:05 +0200 Subject: [PATCH 123/149] sha1_file.c: fix typo it's != its Signed-off-by: Felipe Contreras Signed-off-by: Junio C Hamano --- sha1_file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sha1_file.c b/sha1_file.c index 5b6e0f61fa..032300c4c6 100644 --- a/sha1_file.c +++ b/sha1_file.c @@ -801,7 +801,7 @@ unsigned char* use_pack(struct packed_git *p, if (p->pack_fd == -1 && open_packed_git(p)) die("packfile %s cannot be accessed", p->pack_name); - /* Since packfiles end in a hash of their content and its + /* Since packfiles end in a hash of their content and it's * pointless to ask for an offset into the middle of that * hash, and the in_window function above wouldn't match * don't allow an offset too close to the end of the file. From 3f74c8e8d8721d093655d7bb00ead078d8324100 Mon Sep 17 00:00:00 2001 From: Johannes Sixt Date: Wed, 25 Feb 2009 08:54:42 +0100 Subject: [PATCH 124/149] gitattributes.txt: Path matching rules are explained in gitignore.txt The rules how the patterns are matched against path names are the same for .gitattribute and .gitignore files. This also replace the notion "glob pattern" by "pattern" because gitignore.txt talks about "glob" only in some contexts where the pattern is mentioned. Signed-off-by: Johannes Sixt Signed-off-by: Junio C Hamano --- Documentation/gitattributes.txt | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 227934f59a..55668e345f 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -18,10 +18,10 @@ A `gitattributes` file is a simple text file that gives Each line in `gitattributes` file is of form: - glob attr1 attr2 ... + pattern attr1 attr2 ... -That is, a glob pattern followed by an attributes list, -separated by whitespaces. When the glob pattern matches the +That is, a pattern followed by an attributes list, +separated by whitespaces. When the pattern matches the path in question, the attributes listed on the line are given to the path. @@ -48,13 +48,14 @@ Set to a value:: Unspecified:: - No glob pattern matches the path, and nothing says if + No pattern matches the path, and nothing says if the path has or does not have the attribute, the attribute for the path is said to be Unspecified. -When more than one glob pattern matches the path, a later line +When more than one pattern matches the path, a later line overrides an earlier line. This overriding is done per -attribute. +attribute. The rules how the pattern matches paths are the +same as in `.gitignore` files; see linkgit:gitignore[5]. When deciding what attributes are assigned to a path, git consults `$GIT_DIR/info/attributes` file (which has the highest From 3dbe1165e9facec3497b3da744b832788a47957e Mon Sep 17 00:00:00 2001 From: Michael J Gruber Date: Wed, 25 Feb 2009 15:05:17 +0100 Subject: [PATCH 125/149] Fix typo in contrib/examples/git-svnimport.txt Signed-off-by: Michael J Gruber Signed-off-by: Junio C Hamano --- contrib/examples/git-svnimport.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/contrib/examples/git-svnimport.txt b/contrib/examples/git-svnimport.txt index 71aad8b45b..3bb871e42f 100644 --- a/contrib/examples/git-svnimport.txt +++ b/contrib/examples/git-svnimport.txt @@ -114,9 +114,9 @@ due to SVN memory leaks. (These have been worked around.) -R :: Specify how often git repository should be repacked. + -The default value is 1000. git-svnimport will do import in chunks of 1000 -revisions, after each chunk git repository will be repacked. To disable -this behavior specify some big value here which is mote than number of +The default value is 1000. git-svnimport will do imports in chunks of 1000 +revisions, after each chunk the git repository will be repacked. To disable +this behavior specify some large value here which is greater than the number of revisions to import. -P :: From 69707d616fd3acda6ecc47198edeaaa87f2cfcea Mon Sep 17 00:00:00 2001 From: Jay Soffian Date: Wed, 25 Feb 2009 03:28:15 -0500 Subject: [PATCH 126/149] Allow HTTP tests to run on Darwin This patch allows the HTTP tests to run on OS X 10.5. It is not sufficient to be able to pass in LIB_HTTPD_PATH and LIB_HTTPD_MODULE_PATH alone, as the apache.conf also needs a couple tweaks. These changes are put into an to keep them Darwin specific, but this means lib-httpd.sh needs to be modified to pass -DDarwin to apache when running on Darwin. As long as we're making this change to lib-httpd.sh, we may as well set LIB_HTTPD_PATH and LIB_HTTPD_MODULE_PATH to appropriate default values for the platform. Note that we now pass HTTPD_PARA to apache at shutdown as well. Otherwise apache will emit a harmless, but noisy warning that LogFormat is an unknown directive. Signed-off-by: Jay Soffian Signed-off-by: Junio C Hamano --- t/lib-httpd.sh | 22 +++++++++++++++++----- t/lib-httpd/apache.conf | 6 ++++++ 2 files changed, 23 insertions(+), 5 deletions(-) diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 3824020ca1..86cdebc727 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -11,7 +11,21 @@ then exit fi -LIB_HTTPD_PATH=${LIB_HTTPD_PATH-'/usr/sbin/apache2'} +HTTPD_PARA="" + +case $(uname) in + Darwin) + DEFAULT_HTTPD_PATH='/usr/sbin/httpd' + DEFAULT_HTTPD_MODULE_PATH='/usr/libexec/apache2' + HTTPD_PARA="$HTTPD_PARA -DDarwin" + ;; + *) + DEFAULT_HTTPD_PATH='/usr/sbin/apache2' + DEFAULT_HTTPD_MODULE_PATH='/usr/lib/apache2/modules' + ;; +esac + +LIB_HTTPD_PATH=${LIB_HTTPD_PATH-"$DEFAULT_HTTPD_PATH"} LIB_HTTPD_PORT=${LIB_HTTPD_PORT-'8111'} TEST_PATH="$TEST_DIRECTORY"/lib-httpd @@ -39,14 +53,12 @@ then exit fi - LIB_HTTPD_MODULE_PATH='/usr/lib/apache2/modules' + LIB_HTTPD_MODULE_PATH="$DEFAULT_HTTPD_MODULE_PATH" fi else error "Could not identify web server at '$LIB_HTTPD_PATH'" fi -HTTPD_PARA="" - prepare_httpd() { mkdir -p "$HTTPD_DOCUMENT_ROOT_PATH" @@ -95,5 +107,5 @@ stop_httpd() { trap 'die' EXIT "$LIB_HTTPD_PATH" -d "$HTTPD_ROOT_PATH" \ - -f "$TEST_PATH/apache.conf" -k stop + -f "$TEST_PATH/apache.conf" $HTTPD_PARA -k stop } diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index fdb19a50f1..af6e5e1d6a 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -5,6 +5,12 @@ LogFormat "%h %l %u %t \"%r\" %>s %b" common CustomLog access.log common ErrorLog error.log + + LoadModule log_config_module modules/mod_log_config.so + LockFile accept.lock + PidFile httpd.pid + + LoadModule ssl_module modules/mod_ssl.so From 6e180cdcecbb3e828aa892925d7ef67abf81ad80 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Tue, 24 Feb 2009 23:11:29 -0800 Subject: [PATCH 127/149] Make sure objects/pack exists before creating a new pack In a repository created with git older than f49fb35 (git-init-db: create "pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is not created upon initialization. It was Ok because subdirectories are created as needed inside directories init-db creates, and back then, packfiles were recent invention. After the said commit, new codepaths started relying on the presense of objects/pack/ directory in the repository. This was exacerbated with 8b4eb6b (Do not perform cross-directory renames when creating packs, 2008-09-22) that moved the location temporary pack files are created from objects/ directory to objects/pack/ directory, because moving temporary to the final location was done carefully with lazy leading directory creation. Many packfile related operations in such an old repository can fail mysteriously because of this. This commit introduces two helper functions to make things work better. - odb_mkstemp() is a specialized version of mkstemp() to refactor the code and teach it to create leading directories as needed; - odb_pack_keep() refactors the code to create a ".keep" file while create leading directories as needed. Signed-off-by: Junio C Hamano --- builtin-pack-objects.c | 5 ++--- fast-import.c | 14 +++++--------- git-compat-util.h | 2 ++ index-pack.c | 23 ++++++++++++----------- pack-write.c | 6 ++---- t/t5300-pack-object.sh | 17 +++++++++++++++++ wrapper.c | 32 ++++++++++++++++++++++++++++++++ 7 files changed, 72 insertions(+), 27 deletions(-) diff --git a/builtin-pack-objects.c b/builtin-pack-objects.c index fb5e14d56e..7518d536c3 100644 --- a/builtin-pack-objects.c +++ b/builtin-pack-objects.c @@ -473,9 +473,8 @@ static void write_pack_file(void) } else { char tmpname[PATH_MAX]; int fd; - snprintf(tmpname, sizeof(tmpname), - "%s/pack/tmp_pack_XXXXXX", get_object_directory()); - fd = xmkstemp(tmpname); + fd = odb_mkstemp(tmpname, sizeof(tmpname), + "pack/tmp_pack_XXXXXX"); pack_tmp_name = xstrdup(tmpname); f = sha1fd(fd, pack_tmp_name); } diff --git a/fast-import.c b/fast-import.c index d58cca58e5..f0114948ec 100644 --- a/fast-import.c +++ b/fast-import.c @@ -815,9 +815,8 @@ static void start_packfile(void) struct pack_header hdr; int pack_fd; - snprintf(tmpfile, sizeof(tmpfile), - "%s/pack/tmp_pack_XXXXXX", get_object_directory()); - pack_fd = xmkstemp(tmpfile); + pack_fd = odb_mkstemp(tmpfile, sizeof(tmpfile), + "pack/tmp_pack_XXXXXX"); p = xcalloc(1, sizeof(*p) + strlen(tmpfile) + 2); strcpy(p->pack_name, tmpfile); p->pack_fd = pack_fd; @@ -877,9 +876,8 @@ static char *create_index(void) c = next; } - snprintf(tmpfile, sizeof(tmpfile), - "%s/pack/tmp_idx_XXXXXX", get_object_directory()); - idx_fd = xmkstemp(tmpfile); + idx_fd = odb_mkstemp(tmpfile, sizeof(tmpfile), + "pack/tmp_idx_XXXXXX"); f = sha1fd(idx_fd, tmpfile); sha1write(f, array, 256 * sizeof(int)); SHA1_Init(&ctx); @@ -905,9 +903,7 @@ static char *keep_pack(char *curr_index_name) chmod(pack_data->pack_name, 0444); chmod(curr_index_name, 0444); - snprintf(name, sizeof(name), "%s/pack/pack-%s.keep", - get_object_directory(), sha1_to_hex(pack_data->sha1)); - keep_fd = open(name, O_RDWR|O_CREAT|O_EXCL, 0600); + keep_fd = odb_pack_keep(name, sizeof(name), pack_data->sha1); if (keep_fd < 0) die("cannot create keep file"); write_or_die(keep_fd, keep_msg, strlen(keep_msg)); diff --git a/git-compat-util.h b/git-compat-util.h index cf89cdf459..758a880862 100644 --- a/git-compat-util.h +++ b/git-compat-util.h @@ -294,6 +294,8 @@ extern ssize_t xwrite(int fd, const void *buf, size_t len); extern int xdup(int fd); extern FILE *xfdopen(int fd, const char *mode); extern int xmkstemp(char *template); +extern int odb_mkstemp(char *template, size_t limit, const char *pattern); +extern int odb_pack_keep(char *name, size_t namesz, unsigned char *sha1); static inline size_t xsize_t(off_t len) { diff --git a/index-pack.c b/index-pack.c index c99a1a152c..745ac0bfa0 100644 --- a/index-pack.c +++ b/index-pack.c @@ -171,9 +171,8 @@ static char *open_pack_file(char *pack_name) input_fd = 0; if (!pack_name) { static char tmpfile[PATH_MAX]; - snprintf(tmpfile, sizeof(tmpfile), - "%s/pack/tmp_pack_XXXXXX", get_object_directory()); - output_fd = xmkstemp(tmpfile); + output_fd = odb_mkstemp(tmpfile, sizeof(tmpfile), + "pack/tmp_pack_XXXXXX"); pack_name = xstrdup(tmpfile); } else output_fd = open(pack_name, O_CREAT|O_EXCL|O_RDWR, 0600); @@ -795,22 +794,24 @@ static void final(const char *final_pack_name, const char *curr_pack_name, if (keep_msg) { int keep_fd, keep_msg_len = strlen(keep_msg); - if (!keep_name) { - snprintf(name, sizeof(name), "%s/pack/pack-%s.keep", - get_object_directory(), sha1_to_hex(sha1)); - keep_name = name; - } - keep_fd = open(keep_name, O_RDWR|O_CREAT|O_EXCL, 0600); + + if (!keep_name) + keep_fd = odb_pack_keep(name, sizeof(name), sha1); + else + keep_fd = open(keep_name, O_RDWR|O_CREAT|O_EXCL, 0600); + if (keep_fd < 0) { if (errno != EEXIST) - die("cannot write keep file"); + die("cannot write keep file '%s' (%s)", + keep_name, strerror(errno)); } else { if (keep_msg_len > 0) { write_or_die(keep_fd, keep_msg, keep_msg_len); write_or_die(keep_fd, "\n", 1); } if (close(keep_fd) != 0) - die("cannot write keep file"); + die("cannot close written keep file '%s' (%s)", + keep_name, strerror(errno)); report = "keep"; } } diff --git a/pack-write.c b/pack-write.c index 3621f1dd32..e82c025457 100644 --- a/pack-write.c +++ b/pack-write.c @@ -44,9 +44,7 @@ char *write_idx_file(char *index_name, struct pack_idx_entry **objects, if (!index_name) { static char tmpfile[PATH_MAX]; - snprintf(tmpfile, sizeof(tmpfile), - "%s/pack/tmp_idx_XXXXXX", get_object_directory()); - fd = xmkstemp(tmpfile); + fd = odb_mkstemp(tmpfile, sizeof(tmpfile), "pack/tmp_idx_XXXXXX"); index_name = xstrdup(tmpfile); } else { unlink(index_name); @@ -239,7 +237,7 @@ char *index_pack_lockfile(int ip_out) char packname[46]; /* - * The first thing we expects from index-pack's output + * The first thing we expect from index-pack's output * is "pack\t%40s\n" or "keep\t%40s\n" (46 bytes) where * %40s is the newly created pack SHA1 name. In the "keep" * case, we need it to remove the corresponding .keep file diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 2852a03265..73d871c713 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -180,6 +180,23 @@ test_expect_success \ unset GIT_OBJECT_DIRECTORY +test_expect_success 'survive missing objects/pack directory' ' + ( + rm -fr missing-pack && + mkdir missing-pack && + cd missing-pack && + git init && + GOP=.git/objects/pack + rm -fr $GOP && + git index-pack --stdin --keep=test <../test-3-${packname_3}.pack && + test -f $GOP/pack-${packname_3}.pack && + test_cmp $GOP/pack-${packname_3}.pack ../test-3-${packname_3}.pack && + test -f $GOP/pack-${packname_3}.idx && + test_cmp $GOP/pack-${packname_3}.idx ../test-3-${packname_3}.idx && + test -f $GOP/pack-${packname_3}.keep + ) +' + test_expect_success \ 'verify pack' \ 'git verify-pack test-1-${packname_1}.idx \ diff --git a/wrapper.c b/wrapper.c index 93562f03ee..231a58f1a9 100644 --- a/wrapper.c +++ b/wrapper.c @@ -196,3 +196,35 @@ int xmkstemp(char *template) die("Unable to create temporary file: %s", strerror(errno)); return fd; } + +int odb_mkstemp(char *template, size_t limit, const char *pattern) +{ + int fd; + + snprintf(template, limit, "%s/%s", + get_object_directory(), pattern); + fd = mkstemp(template); + if (0 <= fd) + return fd; + + /* slow path */ + safe_create_leading_directories(template); + snprintf(template, limit, "%s/%s", + get_object_directory(), pattern); + return xmkstemp(template); +} + +int odb_pack_keep(char *name, size_t namesz, unsigned char *sha1) +{ + int fd; + + snprintf(name, namesz, "%s/pack/pack-%s.keep", + get_object_directory(), sha1_to_hex(sha1)); + fd = open(name, O_RDWR|O_CREAT|O_EXCL, 0600); + if (0 <= fd) + return fd; + + /* slow path */ + safe_create_leading_directories(name); + return open(name, O_RDWR|O_CREAT|O_EXCL, 0600); +} From 661763abf6e13eabf0aa1a3eefd364d32da8f4ad Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Wed, 25 Feb 2009 14:50:52 -0800 Subject: [PATCH 128/149] GIT 1.6.2-rc2 Signed-off-by: Junio C Hamano --- Documentation/RelNotes-1.6.2.txt | 5 ++++- GIT-VERSION-GEN | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/RelNotes-1.6.2.txt b/Documentation/RelNotes-1.6.2.txt index d3e9583abf..c4873f787c 100644 --- a/Documentation/RelNotes-1.6.2.txt +++ b/Documentation/RelNotes-1.6.2.txt @@ -150,6 +150,9 @@ v1.6.1.X series. * "git filter-branch" incorrectly tried to update a nonexistent work tree at the end when it is run in a bare repository. +* "git gc" did not work if your repository was created with an ancient git + and never had any pack files in it before. + * "git mergetool" used to ignore autocrlf and other attributes based content rewriting. @@ -162,6 +165,6 @@ v1.6.1.X series. -- exec >/var/tmp/1 -v1.6.2-rc0-89-gf7a2bdb +O=v1.6.2-rc2 echo O=$(git describe master) git shortlog --no-merges $O..master ^maint diff --git a/GIT-VERSION-GEN b/GIT-VERSION-GEN index 9c9fe640fb..0baa79d798 100755 --- a/GIT-VERSION-GEN +++ b/GIT-VERSION-GEN @@ -1,7 +1,7 @@ #!/bin/sh GVF=GIT-VERSION-FILE -DEF_VER=v1.6.1.GIT +DEF_VER=v1.6.2-rc2.GIT LF=' ' From 2c626e5fa8a46f647b88fb32d7b28d573e8631bf Mon Sep 17 00:00:00 2001 From: Mike Ralphson Date: Thu, 26 Feb 2009 16:31:52 +0100 Subject: [PATCH 129/149] Fix odb_mkstemp() on AIX The AIX mkstemp() modifies its template parameter to an empty string if the call fails. The existing code had already recomputed the template, but too late to be good. See also 6ff6af62, which fixed this problem in a different spot. Signed-off-by: Mike Ralphson Signed-off-by: Johannes Sixt Signed-off-by: Junio C Hamano --- wrapper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/wrapper.c b/wrapper.c index 231a58f1a9..5e9de294d5 100644 --- a/wrapper.c +++ b/wrapper.c @@ -208,9 +208,10 @@ int odb_mkstemp(char *template, size_t limit, const char *pattern) return fd; /* slow path */ - safe_create_leading_directories(template); + /* some mkstemp implementations erase template on failure */ snprintf(template, limit, "%s/%s", get_object_directory(), pattern); + safe_create_leading_directories(template); return xmkstemp(template); } From 2591838beece01f98773109a7c6932525be2d144 Mon Sep 17 00:00:00 2001 From: Jay Soffian Date: Thu, 26 Feb 2009 18:44:40 -0500 Subject: [PATCH 130/149] t5540-http-push.sh: avoid non-portable grep -P OS X's GNU grep does not support -P/--perl-regexp. We use a basic RE instead, and simplify the pattern slightly by replacing '+' with '*' so it can be more easily expressed using a basic RE. The important part of pattern, checking for a SHA-1 has suffix in the successful PUT/MOVE operations, remains the same. Also, a-z instead of a-f was an obvious mistake in the original RE. Here are samples of what we want to match: 127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "PUT /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277 127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "MOVE /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277 Signed-off-by: Jay Soffian Signed-off-by: Junio C Hamano --- t/t5540-http-push.sh | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/t/t5540-http-push.sh b/t/t5540-http-push.sh index 11b343274f..10e5fd0d5a 100755 --- a/t/t5540-http-push.sh +++ b/t/t5540-http-push.sh @@ -94,10 +94,15 @@ test_expect_success 'MKCOL sends directory names with trailing slashes' ' ' -test_expect_success 'PUT and MOVE sends object to URLs with SHA-1 hash suffix' ' +x1="[0-9a-f]" +x2="$x1$x1" +x5="$x1$x1$x1$x1$x1" +x38="$x5$x5$x5$x5$x5$x5$x5$x1$x1$x1" +x40="$x38$x2" - grep -P "\"(?:PUT|MOVE) .+objects/[\da-z]{2}/[\da-z]{38}_[\da-z\-]{40} HTTP/[0-9.]+\" 20\d" \ - < "$HTTPD_ROOT_PATH"/access.log +test_expect_success 'PUT and MOVE sends object to URLs with SHA-1 hash suffix' ' + sed -e "s/PUT /OP /" -e "s/MOVE /OP /" "$HTTPD_ROOT_PATH"/access.log | + grep -e "\"OP .*/objects/$x2/${x38}_$x40 HTTP/[.0-9]*\" 20[0-9] " ' From c767184d8f99404d456b32a2c6c5c41d6db7a847 Mon Sep 17 00:00:00 2001 From: Michael J Gruber Date: Thu, 26 Feb 2009 10:52:53 +0100 Subject: [PATCH 131/149] git-am: Keep index in case of abort with dirty index git am --abort resets the index unconditionally. But in case a previous git am exited due to a dirty index it is preferable to keep that index. Make it so. Signed-off-by: Michael J Gruber Signed-off-by: Junio C Hamano --- git-am.sh | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/git-am.sh b/git-am.sh index 8bcb206022..351b4f86fa 100755 --- a/git-am.sh +++ b/git-am.sh @@ -230,11 +230,14 @@ then ;; ,t) git rerere clear - git read-tree --reset -u HEAD ORIG_HEAD - git reset ORIG_HEAD + test -f "$dotest/dirtyindex" || { + git read-tree --reset -u HEAD ORIG_HEAD + git reset ORIG_HEAD + } rm -fr "$dotest" exit ;; esac + rm -f "$dotest/dirtyindex" else # Make sure we are not given --skip, --resolved, nor --abort test "$skip$resolved$abort" = "" || @@ -287,7 +290,11 @@ fi case "$resolved" in '') files=$(git diff-index --cached --name-only HEAD --) || exit - test "$files" && die "Dirty index: cannot apply patches (dirty: $files)" + if test "$files" + then + : >"$dotest/dirtyindex" + die "Dirty index: cannot apply patches (dirty: $files)" + fi esac if test "$(cat "$dotest/utf8")" = t From 2d56a136435bd40f9b6b75103eb4d75003154c9f Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Thu, 26 Feb 2009 11:24:29 -0800 Subject: [PATCH 132/149] git-am: make --abort less dangerous When you are in the middle of "git rebase", "git am --abort" by mistake would have referred to nonexistent ORIG_HEAD and barfed, or worse yet, used a stale ORIG_HEAD and taken you to an unexpected commit. Also the option parsing did not reject "git am --abort --skip". Signed-off-by: Junio C Hamano --- git-am.sh | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/git-am.sh b/git-am.sh index 351b4f86fa..d3390755fc 100755 --- a/git-am.sh +++ b/git-am.sh @@ -221,6 +221,9 @@ then resume=yes case "$skip,$abort" in + t,t) + die "Please make up your mind. --skip or --abort?" + ;; t,) git rerere clear git read-tree --reset -u HEAD HEAD @@ -229,6 +232,10 @@ then git update-ref ORIG_HEAD $orig_head ;; ,t) + if test -f "$dotest/rebasing" + then + exec git rebase --abort + fi git rerere clear test -f "$dotest/dirtyindex" || { git read-tree --reset -u HEAD ORIG_HEAD From 1b249ffe8dff12849e3e215b46b245daecfadba0 Mon Sep 17 00:00:00 2001 From: Christian Couder Date: Fri, 27 Feb 2009 07:31:22 +0100 Subject: [PATCH 133/149] bisect: fix quoting TRIED revs when "bad" commit is also "skip"ped When the "bad" commit was also "skip"ped and when more than one commit was skipped, the "filter_skipped" function would have printed something like: bisect_rev=| (where and are hexadecimal sha1 hashes) and this would have been evaled later as piping "bisect_rev=" into "", which would have failed. So this patch makes the "filter_skipped" function properly quote what it outputs, so that it will print something like: bisect_rev='|' which will be properly evaled later. The caller was not stopping properly because the scriptlet this function returned to be evaled was not strung together with && and because of this, an error in an earlier part of the output was simply ignored. A test case is added to the test suite. And while at it, we also initialize the VARS, FOUND and TRIED variables, so that we protect ourselves from environment variables the user may have with these names. Signed-off-by: Christian Couder Signed-off-by: Junio C Hamano --- git-bisect.sh | 76 ++++++++++++++++++++----------------- t/t6030-bisect-porcelain.sh | 25 ++++++++++++ 2 files changed, 66 insertions(+), 35 deletions(-) diff --git a/git-bisect.sh b/git-bisect.sh index 97ac600873..f9a5c0bdf4 100755 --- a/git-bisect.sh +++ b/git-bisect.sh @@ -269,56 +269,62 @@ filter_skipped() { # Let's parse the output of: # "git rev-list --bisect-vars --bisect-all ..." - eval_rev_list "$_eval" | while read hash line - do - case "$VARS,$FOUND,$TRIED,$hash" in - # We display some vars. - 1,*,*,*) echo "$hash $line" ;; - - # Split line. - ,*,*,---*) ;; - - # We had nothing to search. + eval_rev_list "$_eval" | { + VARS= FOUND= TRIED= + while read hash line + do + case "$VARS,$FOUND,$TRIED,$hash" in + 1,*,*,*) + # "bisect_foo=bar" read from rev-list output. + echo "$hash &&" + ;; + ,*,*,---*) + # Separator + ;; ,,,bisect_rev*) - echo "bisect_rev=" + # We had nothing to search. + echo "bisect_rev= &&" VARS=1 ;; - - # We did not find a good bisect rev. - # This should happen only if the "bad" - # commit is also a "skip" commit. ,,*,bisect_rev*) - echo "bisect_rev=$TRIED" + # We did not find a good bisect rev. + # This should happen only if the "bad" + # commit is also a "skip" commit. + echo "bisect_rev='$TRIED' &&" VARS=1 ;; - - # We are searching. ,,*,*) + # We are searching. TRIED="${TRIED:+$TRIED|}$hash" case "$_skip" in *$hash*) ;; *) - echo "bisect_rev=$hash" - echo "bisect_tried=\"$TRIED\"" + echo "bisect_rev=$hash &&" + echo "bisect_tried='$TRIED' &&" FOUND=1 ;; esac ;; - - # We have already found a rev to be tested. - ,1,*,bisect_rev*) VARS=1 ;; - ,1,*,*) ;; - - # ??? - *) die "filter_skipped error " \ - "VARS: '$VARS' " \ - "FOUND: '$FOUND' " \ - "TRIED: '$TRIED' " \ - "hash: '$hash' " \ - "line: '$line'" - ;; - esac - done + ,1,*,bisect_rev*) + # We have already found a rev to be tested. + VARS=1 + ;; + ,1,*,*) + ;; + *) + # Unexpected input + echo "die 'filter_skipped error'" + die "filter_skipped error " \ + "VARS: '$VARS' " \ + "FOUND: '$FOUND' " \ + "TRIED: '$TRIED' " \ + "hash: '$hash' " \ + "line: '$line'" + ;; + esac + done + echo ':' + } } exit_if_skipped_commits () { diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index 36c9a6965f..0b81e65aa3 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -224,6 +224,31 @@ test_expect_success 'bisect skip: cannot tell between 2 commits' ' fi ' +# $HASH1 is good, $HASH4 is both skipped and bad, we skip $HASH3 +# and $HASH2 is good, +# so we should not be able to tell the first bad commit +# among $HASH3 and $HASH4 +test_expect_success 'bisect skip: with commit both bad and skipped' ' + git bisect start && + git bisect skip && + git bisect bad && + git bisect good $HASH1 && + git bisect skip && + if git bisect good > my_bisect_log.txt + then + echo Oops, should have failed. + false + else + test $? -eq 2 && + grep "first bad commit could be any of" my_bisect_log.txt && + ! grep $HASH1 my_bisect_log.txt && + ! grep $HASH2 my_bisect_log.txt && + grep $HASH3 my_bisect_log.txt && + grep $HASH4 my_bisect_log.txt && + git bisect reset + fi +' + # We want to automatically find the commit that # introduced "Another" into hello. test_expect_success \ From cce074a2760940cb78232ce2201ab5590e274d4a Mon Sep 17 00:00:00 2001 From: Christian Couder Date: Fri, 27 Feb 2009 07:31:22 +0100 Subject: [PATCH 134/149] bisect: fix another instance of eval'ed string When there is nothing to be skipped, the output from rev-list --bisect-vars was eval'ed without first being strung together with &&; this is probably not a problem as it is much less likely to be a bad input than the list handcrafted by the filter_skip function, but it still is a good discipline. Signed-off-by: Christian Couder Signed-off-by: Junio C Hamano --- git-bisect.sh | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/git-bisect.sh b/git-bisect.sh index f9a5c0bdf4..b95dbbbbb2 100755 --- a/git-bisect.sh +++ b/git-bisect.sh @@ -263,7 +263,13 @@ filter_skipped() { _skip="$2" if [ -z "$_skip" ]; then - eval_rev_list "$_eval" + eval_rev_list "$_eval" | { + while read line + do + echo "$line &&" + done + echo ':' + } return fi From 48679e5c2d059b9b198d6f414dd80aa921d23002 Mon Sep 17 00:00:00 2001 From: Eric Wong Date: Fri, 27 Feb 2009 19:40:16 -0800 Subject: [PATCH 135/149] git-svn: disable broken symlink workaround by default Even though this will break things for some extremely rare repositories used by broken Windows clients, it's probably not worth enabling this by default as it has negatively affected many more users than it has helped from what we've seen so far. The extremely rare repositories that have broken symlinks in them will be silently corrupted in import; but users can still reenable this option and restart the import. Signed-off-by: Eric Wong Signed-off-by: Junio C Hamano --- git-svn.perl | 2 +- t/t9131-git-svn-empty-symlink.sh | 10 ++++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/git-svn.perl b/git-svn.perl index d967594ee7..a676a4c78e 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -3297,7 +3297,7 @@ sub new { sub _mark_empty_symlinks { my ($git_svn, $switch_path) = @_; my $bool = Git::config_bool('svn.brokenSymlinkWorkaround'); - return {} if (defined($bool) && ! $bool); + return {} if (!defined($bool)) || (defined($bool) && ! $bool); my %ret; my ($rev, $cmt) = $git_svn->last_rev_commit; diff --git a/t/t9131-git-svn-empty-symlink.sh b/t/t9131-git-svn-empty-symlink.sh index 20529a878c..8f35e294aa 100755 --- a/t/t9131-git-svn-empty-symlink.sh +++ b/t/t9131-git-svn-empty-symlink.sh @@ -83,6 +83,8 @@ EOF ' test_expect_success 'clone using git svn' 'git svn clone -r1 "$svnrepo" x' +test_expect_success 'enable broken symlink workaround' \ + '(cd x && git config svn.brokenSymlinkWorkaround true)' test_expect_success '"bar" is an empty file' 'test -f x/bar && ! test -s x/bar' test_expect_success 'get "bar" => symlink fix from svn' \ '(cd x && git svn rebase)' @@ -97,4 +99,12 @@ test_expect_success 'get "bar" => symlink fix from svn' \ '(cd y && git svn rebase)' test_expect_success '"bar" does not become a symlink' '! test -L y/bar' +# svn.brokenSymlinkWorkaround is unset +test_expect_success 'clone using git svn' 'git svn clone -r1 "$svnrepo" z' +test_expect_success '"bar" is an empty file' 'test -f z/bar && ! test -s z/bar' +test_expect_success 'get "bar" => symlink fix from svn' \ + '(cd z && git svn rebase)' +test_expect_success '"bar" does not become a symlink' '! test -L z/bar' + + test_done From 736e619a1be92fcb6eac0155b51bc93d1dcc3157 Mon Sep 17 00:00:00 2001 From: Ben Walton Date: Fri, 27 Feb 2009 22:11:45 -0500 Subject: [PATCH 136/149] git-svn - return original format_svn_date semantics When %z was removed from the strftime call and subsituted with a local gmt offset calculation, time() was no longer the default for all time functions as it was with the previous localtime(shift). This is now corrected so that format_svn_time behaves as it used to. Signed-off-by: Ben Walton Acked-by: Eric Wong Signed-off-by: Junio C Hamano --- git-svn.perl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/git-svn.perl b/git-svn.perl index a676a4c78e..959eb52f3f 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -4738,7 +4738,7 @@ sub run_pager { sub format_svn_date { # some systmes don't handle or mishandle %z, so be creative. - my $t = shift; + my $t = shift || time; my $gm = timelocal(gmtime($t)); my $sign = qw( + + - )[ $t <=> $gm ]; my $gmoff = sprintf("%s%02d%02d", $sign, (gmtime(abs($t - $gm)))[2,1]); From 749485f6225455eefd4a2af31e2c98068f20464d Mon Sep 17 00:00:00 2001 From: Todd Zullinger Date: Sat, 28 Feb 2009 13:42:02 -0500 Subject: [PATCH 137/149] git-rebase: Update --whitespace documentation The parameters accepted by the --whitespace option of "git apply" have changed over time, and the documentation for "git rebase" was out of sync. Remove the specific parameter list from the "git rebase" documentation and simply point to the "git apply" documentation for details, as is already done in the "git am" documentation. Signed-off-by: Todd Zullinger Signed-off-by: Junio C Hamano --- Documentation/git-rebase.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 30487de48f..da3c38cd60 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -243,7 +243,7 @@ OPTIONS context exist they all must match. By default no context is ever ignored. ---whitespace=:: +--whitespace=