diff --git a/Documentation/RelNotes-1.6.0.1.txt b/Documentation/RelNotes-1.6.0.1.txt
new file mode 100644
index 0000000000..49d7a1cafa
--- /dev/null
+++ b/Documentation/RelNotes-1.6.0.1.txt
@@ -0,0 +1,36 @@
+GIT v1.6.0.1 Release Notes
+==========================
+
+Fixes since v1.6.0
+------------------
+
+* "git diff --cc" did not honor content mangling specified by
+  gitattributes and core.autocrlf when reading from the work tree.
+
+* "git diff --check" incorrectly detected new trailing blank lines when
+  whitespace check was in effect.
+
+* "git for-each-ref" tried to dereference NULL when asked for '%(body)" on
+  a tag with a single incomplete line as its payload.
+
+* "git format-patch" peeked before the beginning of a string when
+  "format.headers" variable is empty (a misconfiguration).
+
+* "git help help" did not work correctly.
+
+* "git mailinfo" (hence "git am") was unhappy when MIME multipart message
+  contained garbage after the finishing boundary.
+
+* "git mailinfo" also was unhappy when the "From: " line only had a bare
+  e-mail address.
+
+* "git merge" did not refresh the index correctly when a merge resulted in
+  a fast-forward.
+
+* "git merge" did not resolve a truly trivial merges that can be done
+  without content level merges.
+
+* "git svn dcommit" to a repository with URL that has embedded usernames
+  did not work correctly.
+
+Contains other various documentation fixes.
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 676c39bb84..81f981509a 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -358,8 +358,13 @@ core.editor::
 	`EDITOR` environment variables and then finally `vi`.
 
 core.pager::
-	The command that git will use to paginate output.  Can be overridden
-	with the `GIT_PAGER` environment variable.
+	The command that git will use to paginate output.  Can
+	be overridden with the `GIT_PAGER` environment
+	variable.  Note that git sets the `LESS` environment
+	variable to `FRSX` if it is unset when it runs the
+	pager.  One can change these settings by setting the
+	`LESS` variable to some other value or by giving the
+	`core.pager` option a value such as "`less -+FRSX`".
 
 core.whitespace::
 	A comma separated list of common whitespace problems to
@@ -979,9 +984,11 @@ pack.packSizeLimit::
 	linkgit:git-repack[1].
 
 pager.<cmd>::
-	Allows to set your own pager preferences for each command, overriding
-	the default. If `\--pager` or `\--no-pager` is specified on the command
-	line, it takes precedence over this option.
+	Allows turning on or off pagination of the output of a
+	particular git subcommand when writing to a tty.  If
+	`\--paginate` or `\--no-pager` is specified on the command line,
+	it takes precedence over this option.  To disable pagination for
+	all commands, set `core.pager` or 'GIT_PAGER' to "`cat`".
 
 pull.octopus::
 	The default merge strategy to use when pulling multiple branches
diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt
index c2d3c90d27..785779e221 100644
--- a/Documentation/git-cvsserver.txt
+++ b/Documentation/git-cvsserver.txt
@@ -11,7 +11,7 @@ SYNOPSIS
 SSH:
 
 [verse]
-export CVS_SERVER=git-cvsserver
+export CVS_SERVER="git cvsserver"
 'cvs' -d :ext:user@server/path/repo.git co <HEAD_name>
 
 pserver (/etc/inetd.conf):
@@ -109,7 +109,7 @@ Note: Newer CVS versions (>= 1.12.11) also support specifying
 CVS_SERVER directly in CVSROOT like
 
 ------
-cvs -d ":ext;CVS_SERVER=git-cvsserver:user@server/path/repo.git" co <HEAD_name>
+cvs -d ":ext;CVS_SERVER=git cvsserver:user@server/path/repo.git" co <HEAD_name>
 ------
 This has the advantage that it will be saved in your 'CVS/Root' files and
 you don't need to worry about always setting the correct environment
@@ -158,7 +158,7 @@ allowing access over SSH.
 --
 ------
      export CVSROOT=:ext:user@server:/var/git/project.git
-     export CVS_SERVER=git-cvsserver
+     export CVS_SERVER="git cvsserver"
 ------
 --
 4. For SSH clients that will make commits, make sure their server-side
@@ -283,7 +283,7 @@ To get a checkout with the Eclipse CVS client:
 Protocol notes: If you are using anonymous access via pserver, just select that.
 Those using SSH access should choose the 'ext' protocol, and configure 'ext'
 access on the Preferences->Team->CVS->ExtConnection pane. Set CVS_SERVER to
-'git-cvsserver'. Note that password support is not good when using 'ext',
+"'git cvsserver'". Note that password support is not good when using 'ext',
 you will definitely want to have SSH keys setup.
 
 Alternatively, you can just use the non-standard extssh protocol that Eclipse
diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt
index 98cfa3c0d0..caa07298a6 100644
--- a/Documentation/git-revert.txt
+++ b/Documentation/git-revert.txt
@@ -15,6 +15,15 @@ Given one existing commit, revert the change the patch introduces, and record a
 new commit that records it.  This requires your working tree to be clean (no
 modifications from the HEAD commit).
 
+Note: 'git revert' is used to record a new commit to reverse the
+effect of an earlier commit (often a faulty one).  If you want to
+throw away all uncommitted changes in your working directory, you
+should see linkgit:git-reset[1], particularly the '--hard' option.  If
+you want to extract specific files as they were in another commit, you
+should see linkgit:git-checkout[1], specifically the 'git checkout
+<commit> -- <filename>' syntax.  Take care with these alternatives as
+both will discard uncommitted changes in your working directory.
+
 OPTIONS
 -------
 <commit>::
diff --git a/Documentation/git.txt b/Documentation/git.txt
index 1bc295dd54..363a785452 100644
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -497,7 +497,8 @@ other
 'GIT_PAGER'::
 	This environment variable overrides `$PAGER`. If it is set
 	to an empty string or to the value "cat", git will not launch
-	a pager.
+	a pager.  See also the `core.pager` option in
+	linkgit:git-config[1].
 
 'GIT_SSH'::
 	If this environment variable is set then 'git-fetch'
diff --git a/Makefile b/Makefile
index 5150ba8158..8800c17efb 100644
--- a/Makefile
+++ b/Makefile
@@ -727,6 +727,7 @@ ifeq ($(uname_S),HP-UX)
 	NO_UNSETENV = YesPlease
 	NO_HSTRERROR = YesPlease
 	NO_SYS_SELECT_H = YesPlease
+	SNPRINTF_RETURNS_BOGUS = YesPlease
 endif
 ifneq (,$(findstring MINGW,$(uname_S)))
 	NO_MMAP = YesPlease
diff --git a/RelNotes b/RelNotes
index b9a53c3416..8f32997335 120000
--- a/RelNotes
+++ b/RelNotes
@@ -1 +1 @@
-Documentation/RelNotes-1.6.0.txt
\ No newline at end of file
+Documentation/RelNotes-1.6.0.1.txt
\ No newline at end of file
diff --git a/builtin-for-each-ref.c b/builtin-for-each-ref.c
index 445039e19c..4d25ec51d0 100644
--- a/builtin-for-each-ref.c
+++ b/builtin-for-each-ref.c
@@ -459,8 +459,10 @@ static void find_subpos(const char *buf, unsigned long sz, const char **sub, con
 		return;
 	*sub = buf; /* first non-empty line */
 	buf = strchr(buf, '\n');
-	if (!buf)
+	if (!buf) {
+		*body = "";
 		return; /* no body */
+	}
 	while (*buf == '\n')
 		buf++; /* skip blank between subject and body */
 	*body = buf;
diff --git a/builtin-log.c b/builtin-log.c
index f4975cf35f..911fd65990 100644
--- a/builtin-log.c
+++ b/builtin-log.c
@@ -461,7 +461,7 @@ static int extra_cc_alloc;
 static void add_header(const char *value)
 {
 	int len = strlen(value);
-	while (value[len - 1] == '\n')
+	while (len && value[len - 1] == '\n')
 		len--;
 	if (!strncasecmp(value, "to: ", 4)) {
 		ALLOC_GROW(extra_to, extra_to_nr + 1, extra_to_alloc);
diff --git a/builtin-mailinfo.c b/builtin-mailinfo.c
index 3577382d70..e890f7a6d1 100644
--- a/builtin-mailinfo.c
+++ b/builtin-mailinfo.c
@@ -107,7 +107,7 @@ static void handle_from(const struct strbuf *from)
 	el = strcspn(at, " \n\t\r\v\f>");
 	strbuf_reset(&email);
 	strbuf_add(&email, at, el);
-	strbuf_remove(&f, at - f.buf, el + 1);
+	strbuf_remove(&f, at - f.buf, el + (at[el] ? 1 : 0));
 
 	/* The remainder is name.  It could be "John Doe <john.doe@xz>"
 	 * or "john.doe@xz (John Doe)", but we have removed the
@@ -175,7 +175,7 @@ static void handle_content_type(struct strbuf *line)
 		 message_type = TYPE_OTHER;
 	if (slurp_attr(line->buf, "boundary=", boundary)) {
 		strbuf_insert(boundary, 0, "--", 2);
-		if (content_top++ >= &content[MAX_BOUNDARIES]) {
+		if (++content_top > &content[MAX_BOUNDARIES]) {
 			fprintf(stderr, "Too many boundaries to handle\n");
 			exit(1);
 		}
@@ -603,7 +603,7 @@ static void handle_filter(struct strbuf *line);
 static int find_boundary(void)
 {
 	while (!strbuf_getline(&line, fin, '\n')) {
-		if (is_multipart_boundary(&line))
+		if (*content_top && is_multipart_boundary(&line))
 			return 1;
 	}
 	return 0;
@@ -626,7 +626,7 @@ again:
 		/* technically won't happen as is_multipart_boundary()
 		   will fail first.  But just in case..
 		 */
-		if (content_top-- < content) {
+		if (--content_top < content) {
 			fprintf(stderr, "Detected mismatched boundaries, "
 					"can't recover\n");
 			exit(1);
diff --git a/builtin-merge.c b/builtin-merge.c
index dde0c7ed33..b280444e10 100644
--- a/builtin-merge.c
+++ b/builtin-merge.c
@@ -564,8 +564,7 @@ static int checkout_fast_forward(unsigned char *head, unsigned char *remote)
 	struct dir_struct dir;
 	struct lock_file *lock_file = xcalloc(1, sizeof(struct lock_file));
 
-	if (read_cache_unmerged())
-		die("you need to resolve your current index first");
+	refresh_cache(REFRESH_QUIET);
 
 	fd = hold_locked_index(lock_file, 1);
 
@@ -650,13 +649,15 @@ static void add_strategies(const char *string, unsigned attr)
 static int merge_trivial(void)
 {
 	unsigned char result_tree[20], result_commit[20];
-	struct commit_list parent;
+	struct commit_list *parent = xmalloc(sizeof(struct commit_list *));
 
 	write_tree_trivial(result_tree);
 	printf("Wonderful.\n");
-	parent.item = remoteheads->item;
-	parent.next = NULL;
-	commit_tree(merge_msg.buf, result_tree, &parent, result_commit);
+	parent->item = lookup_commit(head);
+	parent->next = xmalloc(sizeof(struct commit_list *));
+	parent->next->item = remoteheads->item;
+	parent->next->next = NULL;
+	commit_tree(merge_msg.buf, result_tree, parent, result_commit);
 	finish(result_commit, "In-index merge");
 	drop_save();
 	return 0;
@@ -742,6 +743,7 @@ static int evaluate_result(void)
 	int cnt = 0;
 	struct rev_info rev;
 
+	discard_cache();
 	if (read_cache() < 0)
 		die("failed to read the cache");
 
@@ -775,7 +777,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix)
 	struct commit_list **remotes = &remoteheads;
 
 	setup_work_tree();
-	if (unmerged_cache())
+	if (read_cache_unmerged())
 		die("You are in the middle of a conflicted merge.");
 
 	/*
@@ -936,7 +938,6 @@ int cmd_merge(int argc, const char **argv, const char *prefix)
 			hex,
 			find_unique_abbrev(remoteheads->item->object.sha1,
 			DEFAULT_ABBREV));
-		refresh_cache(REFRESH_QUIET);
 		strbuf_init(&msg, 0);
 		strbuf_addstr(&msg, "Fast forward");
 		if (have_message)
@@ -1073,6 +1074,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix)
 		}
 
 		/* Automerge succeeded. */
+		discard_cache();
 		write_tree_trivial(result_tree);
 		automerge_was_ok = 1;
 		break;
diff --git a/cache.h b/cache.h
index 2475de9fa8..884fae826c 100644
--- a/cache.h
+++ b/cache.h
@@ -222,7 +222,8 @@ struct index_state {
 	struct cache_tree *cache_tree;
 	time_t timestamp;
 	void *alloc;
-	unsigned name_hash_initialized : 1;
+	unsigned name_hash_initialized : 1,
+		 initialized : 1;
 	struct hash_table name_hash;
 };
 
diff --git a/combine-diff.c b/combine-diff.c
index 9f80a1c5e3..4dfc330867 100644
--- a/combine-diff.c
+++ b/combine-diff.c
@@ -727,6 +727,18 @@ static void show_patch_diff(struct combine_diff_path *elem, int num_parent,
 				die("early EOF '%s'", elem->path);
 
 			result[len] = 0;
+
+			/* If not a fake symlink, apply filters, e.g. autocrlf */
+			if (is_file) {
+				struct strbuf buf;
+
+				strbuf_init(&buf, 0);
+				if (convert_to_git(elem->path, result, len, &buf, safe_crlf)) {
+					free(result);
+					result = strbuf_detach(&buf, &len);
+					result_size = len;
+				}
+			}
 		}
 		else {
 		deleted_file:
diff --git a/compat/snprintf.c b/compat/snprintf.c
index 580966e56a..357e733074 100644
--- a/compat/snprintf.c
+++ b/compat/snprintf.c
@@ -17,6 +17,8 @@ int git_vsnprintf(char *str, size_t maxsize, const char *format, va_list ap)
 
 	if (maxsize > 0) {
 		ret = vsnprintf(str, maxsize-SNPRINTF_SIZE_CORR, format, ap);
+		if (ret == maxsize-1)
+			ret = -1;
 		/* Windows does not NUL-terminate if result fills buffer */
 		str[maxsize-1] = 0;
 	}
@@ -34,6 +36,8 @@ int git_vsnprintf(char *str, size_t maxsize, const char *format, va_list ap)
 			break;
 		s = str;
 		ret = vsnprintf(str, maxsize-SNPRINTF_SIZE_CORR, format, ap);
+		if (ret == maxsize-1)
+			ret = -1;
 	}
 	free(s);
 	return ret;
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 158b912841..89858c237e 100755
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -271,15 +271,17 @@ __git_merge_strategies ()
 		echo "$__git_merge_strategylist"
 		return
 	fi
-	sed -n "/^all_strategies='/{
-		s/^all_strategies='//
-		s/'//
+	git merge -s help 2>&1 |
+	sed -n -e '/[Aa]vailable strategies are: /,/^$/{
+		s/\.$//
+		s/.*://
+		s/^[ 	]*//
+		s/[ 	]*$//
 		p
-		q
-		}" "$(git --exec-path)/git-merge"
+	}'
 }
 __git_merge_strategylist=
-__git_merge_strategylist="$(__git_merge_strategies 2>/dev/null)"
+__git_merge_strategylist=$(__git_merge_strategies 2>/dev/null)
 
 __git_complete_file ()
 {
@@ -769,7 +771,7 @@ _git_diff ()
 		__gitcomp "--cached --stat --numstat --shortstat --summary
 			--patch-with-stat --name-only --name-status --color
 			--no-color --color-words --no-renames --check
-			--full-index --binary --abbrev --diff-filter
+			--full-index --binary --abbrev --diff-filter=
 			--find-copies-harder --pickaxe-all --pickaxe-regex
 			--text --ignore-space-at-eol --ignore-space-change
 			--ignore-all-space --exit-code --quiet --ext-diff
diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4
index f9865b444f..46136d49bf 100755
--- a/contrib/fast-import/git-p4
+++ b/contrib/fast-import/git-p4
@@ -76,7 +76,7 @@ def write_pipe(c, str):
 
 def p4_write_pipe(c, str):
     real_cmd = p4_build_cmd(c)
-    return write_pipe(c, str)
+    return write_pipe(real_cmd, str)
 
 def read_pipe(c, ignore_error=False):
     if verbose:
diff --git a/contrib/fast-import/git-p4.txt b/contrib/fast-import/git-p4.txt
index ac551d45f1..49b335921a 100644
--- a/contrib/fast-import/git-p4.txt
+++ b/contrib/fast-import/git-p4.txt
@@ -3,14 +3,16 @@ git-p4 - Perforce <-> Git converter using git-fast-import
 Usage
 =====
 
-git-p4 supports two main modes: Importing from Perforce to a Git repository is
-done using "git-p4 sync" or "git-p4 rebase". Submitting changes from Git back
-to Perforce is done using "git-p4 submit".
+git-p4 can be used in two different ways:
+
+1) To import changes from Perforce to a Git repository, using "git-p4 sync".
+
+2) To submit changes from Git back to Perforce, using "git-p4 submit".
 
 Importing
 =========
 
-You can simply start with
+Simply start with
 
   git-p4 clone //depot/path/project
 
@@ -18,11 +20,18 @@ or
 
   git-p4 clone //depot/path/project myproject
 
-This will create an empty git repository in a subdirectory called "project" (or
-"myproject" with the second command), import the head revision from the
-specified perforce path into a git "p4" branch (remotes/p4 actually), create a
-master branch off it and check it out. If you want the entire history (not just
-the head revision) then you can simply append a "@all" to the depot path:
+This will:
+
+1) Create an empty git repository in a subdirectory called "project" (or
+"myproject" with the second command)
+
+2) Import the head revision from the given Perforce path into a git branch
+called "p4" (remotes/p4 actually)
+
+3) Create a master branch based on it and check it out.
+
+If you want the entire history (not just the head revision) then you can simply
+append a "@all" to the depot path:
 
   git-p4 clone //depot/project/main@all myproject
 
@@ -37,31 +46,40 @@ If you want more control you can also use the git-p4 sync command directly:
 
 This will import the current head revision of the specified depot path into a
 "remotes/p4/master" branch of your git repository. You can use the
---branch=mybranch option to use a different branch.
+--branch=mybranch option to import into a different branch.
 
-If you want to import the entire history of a given depot path just use
+If you want to import the entire history of a given depot path simply use:
 
   git-p4 sync //path/in/depot@all
 
+
+Note:
+
 To achieve optimal compression you may want to run 'git repack -a -d -f' after
 a big import. This may take a while.
 
-Support for Perforce integrations is still work in progress. Don't bother
-trying it unless you want to hack on it :)
-
 Incremental Imports
 ===================
 
-After an initial import you can easily synchronize your git repository with
-newer changes from the Perforce depot by just calling
+After an initial import you can continue to synchronize your git repository
+with newer changes from the Perforce depot by just calling
 
   git-p4 sync
 
 in your git repository. By default the "remotes/p4/master" branch is updated.
 
-It is recommended to run 'git repack -a -d -f' from time to time when using
-incremental imports to optimally combine the individual git packs that each
-incremental import creates through the use of git-fast-import.
+Advanced Setup
+==============
+
+Suppose you have a periodically updated git repository somewhere, containing a
+complete import of a Perforce project. This repository can be cloned and used
+with git-p4. When updating the cloned repository with the "sync" command,
+git-p4 will try to fetch changes from the original repository first. The git
+protocol used with this is usually faster than importing from Perforce
+directly.
+
+This behaviour can be disabled by setting the "git-p4.syncFromOrigin" git
+configuration variable to "false".
 
 Updating
 ========
@@ -79,7 +97,7 @@ Submitting
 ==========
 
 git-p4 has support for submitting changes from a git repository back to the
-Perforce depot. This requires a Perforce checkout separate to your git
+Perforce depot. This requires a Perforce checkout separate from your git
 repository. To submit all changes that are in the current git branch but not in
 the "p4" branch (or "origin" if "p4" doesn't exist) simply call
 
@@ -97,17 +115,6 @@ continue importing the remaining changes with
 
   git-p4 submit --continue
 
-After submitting you should sync your perforce import branch ("p4" or "origin")
-from Perforce using git-p4's sync command.
-
-If you have changes in your working directory that you haven't committed into
-git yet but that you want to commit to Perforce directly ("quick fixes") then
-you do not have to go through the intermediate step of creating a git commit
-first but you can just call
-
-  git-p4 submit --direct
-
-
 Example
 =======
 
diff --git a/decorate.c b/decorate.c
index d9668d2ef9..82d9e221ea 100644
--- a/decorate.c
+++ b/decorate.c
@@ -6,13 +6,13 @@
 #include "object.h"
 #include "decorate.h"
 
-static unsigned int hash_obj(struct object *obj, unsigned int n)
+static unsigned int hash_obj(const struct object *obj, unsigned int n)
 {
 	unsigned int hash = *(unsigned int *)obj->sha1;
 	return hash % n;
 }
 
-static void *insert_decoration(struct decoration *n, struct object *base, void *decoration)
+static void *insert_decoration(struct decoration *n, const struct object *base, void *decoration)
 {
 	int size = n->size;
 	struct object_decoration *hash = n->hash;
@@ -44,7 +44,7 @@ static void grow_decoration(struct decoration *n)
 	n->nr = 0;
 
 	for (i = 0; i < old_size; i++) {
-		struct object *base = old_hash[i].base;
+		const struct object *base = old_hash[i].base;
 		void *decoration = old_hash[i].decoration;
 
 		if (!base)
@@ -55,7 +55,8 @@ static void grow_decoration(struct decoration *n)
 }
 
 /* Add a decoration pointer, return any old one */
-void *add_decoration(struct decoration *n, struct object *obj, void *decoration)
+void *add_decoration(struct decoration *n, const struct object *obj,
+		void *decoration)
 {
 	int nr = n->nr + 1;
 
@@ -65,7 +66,7 @@ void *add_decoration(struct decoration *n, struct object *obj, void *decoration)
 }
 
 /* Lookup a decoration pointer */
-void *lookup_decoration(struct decoration *n, struct object *obj)
+void *lookup_decoration(struct decoration *n, const struct object *obj)
 {
 	int j;
 
diff --git a/decorate.h b/decorate.h
index 1fa4ad9beb..e7328044ff 100644
--- a/decorate.h
+++ b/decorate.h
@@ -2,7 +2,7 @@
 #define DECORATE_H
 
 struct object_decoration {
-	struct object *base;
+	const struct object *base;
 	void *decoration;
 };
 
@@ -12,7 +12,7 @@ struct decoration {
 	struct object_decoration *hash;
 };
 
-extern void *add_decoration(struct decoration *n, struct object *obj, void *decoration);
-extern void *lookup_decoration(struct decoration *n, struct object *obj);
+extern void *add_decoration(struct decoration *n, const struct object *obj, void *decoration);
+extern void *lookup_decoration(struct decoration *n, const struct object *obj);
 
 #endif
diff --git a/diff.c b/diff.c
index bf5d5f15a3..f70e6b4912 100644
--- a/diff.c
+++ b/diff.c
@@ -1627,6 +1627,7 @@ static void builtin_checkdiff(const char *name_a, const char *name_b,
 		xdemitcb_t ecb;
 
 		memset(&xecfg, 0, sizeof(xecfg));
+		xecfg.ctxlen = 1; /* at least one context line */
 		xpp.flags = XDF_NEED_MINIMAL;
 		ecb.outf = xdiff_outf;
 		ecb.priv = &data;
diff --git a/git-svn.perl b/git-svn.perl
index 099fd02b3f..7a1d26db8b 100755
--- a/git-svn.perl
+++ b/git-svn.perl
@@ -421,7 +421,7 @@ sub cmd_dcommit {
 	$head ||= 'HEAD';
 	my @refs;
 	my ($url, $rev, $uuid, $gs) = working_head_info($head, \@refs);
-	$url = $_commit_url if defined $_commit_url;
+	$url = defined $_commit_url ? $_commit_url : $gs->full_url;
 	my $last_rev = $_revision if defined $_revision;
 	if ($url) {
 		print "Committing to $url ...\n";
@@ -437,6 +437,8 @@ sub cmd_dcommit {
 		     "If these changes depend on each other, re-running ",
 		     "without --no-rebase may be required."
 	}
+	my $expect_url = $url;
+	Git::SVN::remove_username($expect_url);
 	while (1) {
 		my $d = shift @$linear_refs or last;
 		unless (defined $last_rev) {
@@ -511,9 +513,9 @@ sub cmd_dcommit {
 					  $gs->refname,
 					  "\nBefore dcommitting";
 				}
-				if ($url_ ne $url) {
+				if ($url_ ne $expect_url) {
 					fatal "URL mismatch after rebase: ",
-					      "$url_ != $url";
+					      "$url_ != $expect_url";
 				}
 				if ($uuid_ ne $uuid) {
 					fatal "uuid mismatch after rebase: ",
diff --git a/help.c b/help.c
index 3cb1962896..dc0786d800 100644
--- a/help.c
+++ b/help.c
@@ -555,7 +555,8 @@ static int is_git_command(const char *s)
 {
 	load_command_list();
 	return is_in_cmdlist(&main_cmds, s) ||
-		is_in_cmdlist(&other_cmds, s);
+		is_in_cmdlist(&other_cmds, s) ||
+		!strcmp(s, "help");
 }
 
 static const char *prepend(const char *prefix, const char *cmd)
diff --git a/read-cache.c b/read-cache.c
index 2c03ec3069..35fec468b1 100644
--- a/read-cache.c
+++ b/read-cache.c
@@ -1155,7 +1155,7 @@ int read_index_from(struct index_state *istate, const char *path)
 	size_t mmap_size;
 
 	errno = EBUSY;
-	if (istate->alloc)
+	if (istate->initialized)
 		return istate->cache_nr;
 
 	errno = ENOENT;
@@ -1195,6 +1195,7 @@ int read_index_from(struct index_state *istate, const char *path)
 	 * index size
 	 */
 	istate->alloc = xmalloc(estimate_cache_size(mmap_size, istate->cache_nr));
+	istate->initialized = 1;
 
 	src_offset = sizeof(*hdr);
 	dst_offset = 0;
@@ -1247,6 +1248,7 @@ int discard_index(struct index_state *istate)
 	cache_tree_free(&(istate->cache_tree));
 	free(istate->alloc);
 	istate->alloc = NULL;
+	istate->initialized = 0;
 
 	/* no need to throw away allocated active_cache */
 	return 0;
diff --git a/remote.c b/remote.c
index f61a3ab399..105668f8a3 100644
--- a/remote.c
+++ b/remote.c
@@ -579,8 +579,7 @@ int valid_fetch_refspec(const char *fetch_refspec_str)
 	struct refspec *refspec;
 
 	refspec = parse_refspec_internal(1, fetch_refspec, 1, 1);
-	if (refspec)
-		free(refspec);
+	free(refspec);
 	return !!refspec;
 }
 
diff --git a/revision.h b/revision.h
index f64e8ce7ff..1b045669ae 100644
--- a/revision.h
+++ b/revision.h
@@ -119,7 +119,7 @@ struct rev_info {
 void read_revisions_from_stdin(struct rev_info *revs);
 
 typedef void (*show_early_output_fn_t)(struct rev_info *, struct commit_list *);
-volatile show_early_output_fn_t show_early_output;
+extern volatile show_early_output_fn_t show_early_output;
 
 extern void init_revisions(struct rev_info *revs, const char *prefix);
 extern int setup_revisions(int argc, const char **argv, struct rev_info *revs, const char *def);
diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh
index 25628bfaa3..c4565d559d 100755
--- a/t/t1002-read-tree-m-u-2way.sh
+++ b/t/t1002-read-tree-m-u-2way.sh
@@ -20,6 +20,8 @@ _x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
 _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
 compare_change () {
 	sed >current \
+	    -e '1{/^diff --git /d;}' \
+	    -e '2{/^index /d;}' \
 	    -e '/^--- /d; /^+++ /d; /^@@ /d;' \
 	    -e 's/^\(.[0-7][0-7][0-7][0-7][0-7][0-7]\) '"$_x40"' /\1 X /' "$1"
 	test_cmp expected current
@@ -81,7 +83,7 @@ test_expect_success \
      git update-index --add yomin &&
      git read-tree -m -u $treeH $treeM &&
      git ls-files --stage >4.out || return 1
-     diff -U0 M.out 4.out >4diff.out
+     git diff -U0 --no-index M.out 4.out >4diff.out
      compare_change 4diff.out expected &&
      check_cache_at yomin clean &&
      sum bozbar frotz nitfol >actual4.sum &&
@@ -100,7 +102,7 @@ test_expect_success \
      echo yomin yomin >yomin &&
      git read-tree -m -u $treeH $treeM &&
      git ls-files --stage >5.out || return 1
-     diff -U0 M.out 5.out >5diff.out
+     git diff -U0 --no-index M.out 5.out >5diff.out
      compare_change 5diff.out expected &&
      check_cache_at yomin dirty &&
      sum bozbar frotz nitfol >actual5.sum &&
@@ -212,7 +214,7 @@ test_expect_success \
      git update-index --add nitfol &&
      git read-tree -m -u $treeH $treeM &&
      git ls-files --stage >14.out || return 1
-     diff -U0 M.out 14.out >14diff.out
+     git diff -U0 --no-index M.out 14.out >14diff.out
      compare_change 14diff.out expected &&
      sum bozbar frotz >actual14.sum &&
      grep -v nitfol M.sum > expected14.sum &&
@@ -233,7 +235,7 @@ test_expect_success \
      echo nitfol nitfol nitfol >nitfol &&
      git read-tree -m -u $treeH $treeM &&
      git ls-files --stage >15.out || return 1
-     diff -U0 M.out 15.out >15diff.out
+     git diff -U0 --no-index M.out 15.out >15diff.out
      compare_change 15diff.out expected &&
      check_cache_at nitfol dirty &&
      sum bozbar frotz >actual15.sum &&
diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh
index aff360303a..f2880152b0 100755
--- a/t/t3030-merge-recursive.sh
+++ b/t/t3030-merge-recursive.sh
@@ -269,6 +269,17 @@ test_expect_success 'merge-recursive result' '
 
 '
 
+test_expect_success 'fail if the index has unresolved entries' '
+
+	rm -fr [abcd] &&
+	git checkout -f "$c1" &&
+
+	test_must_fail git merge "$c5" &&
+	test_must_fail git merge "$c5" 2> out &&
+	grep "You are in the middle of a conflicted merge" out
+
+'
+
 test_expect_success 'merge-recursive remove conflict' '
 
 	rm -fr [abcd] &&
diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh
index a27fccc8dc..b1cbd36d17 100755
--- a/t/t4015-diff-whitespace.sh
+++ b/t/t4015-diff-whitespace.sh
@@ -341,4 +341,31 @@ test_expect_success 'checkdiff detects trailing blank lines' '
 	git diff --check | grep "ends with blank"
 '
 
+test_expect_success 'checkdiff allows new blank lines' '
+	git checkout x &&
+	mv x y &&
+	(
+		echo "/* This is new */" &&
+		echo "" &&
+		cat y
+	) >x &&
+	git diff --check
+'
+
+test_expect_success 'combined diff with autocrlf conversion' '
+
+	git reset --hard &&
+	echo >x hello &&
+	git commit -m "one side" x &&
+	git checkout HEAD^ &&
+	echo >x goodbye &&
+	git commit -m "the other side" x &&
+	git config core.autocrlf true &&
+	test_must_fail git merge master &&
+
+	git diff | sed -e "1,/^@@@/d" >actual &&
+	! grep "^-" actual
+
+'
+
 test_done
diff --git a/t/t5100-mailinfo.sh b/t/t5100-mailinfo.sh
index 8dfaddda91..198e3503d5 100755
--- a/t/t5100-mailinfo.sh
+++ b/t/t5100-mailinfo.sh
@@ -43,4 +43,15 @@ test_expect_success 'Preserve NULs out of MIME encoded message' '
 
 '
 
+test_expect_success 'mailinfo on from header without name works' '
+
+	mkdir info-from &&
+	git mailsplit -oinfo-from "$TEST_DIRECTORY"/t5100/info-from.in &&
+	test_cmp "$TEST_DIRECTORY"/t5100/info-from.in info-from/0001 &&
+	git mailinfo info-from/msg info-from/patch \
+	  <info-from/0001 >info-from/out &&
+	test_cmp "$TEST_DIRECTORY"/t5100/info-from.expect info-from/out
+
+'
+
 test_done
diff --git a/t/t5100/info-from.expect b/t/t5100/info-from.expect
new file mode 100644
index 0000000000..c31d2eb550
--- /dev/null
+++ b/t/t5100/info-from.expect
@@ -0,0 +1,5 @@
+Author: bare@example.com
+Email: bare@example.com
+Subject: testing bare address in from header
+Date: Sun, 25 May 2008 00:38:18 -0700
+
diff --git a/t/t5100/info-from.in b/t/t5100/info-from.in
new file mode 100644
index 0000000000..4f082093fc
--- /dev/null
+++ b/t/t5100/info-from.in
@@ -0,0 +1,8 @@
+From 667d8940e719cddee1cfe237cbbe215e20270b09 Mon Sep 17 00:00:00 2001
+From: bare@example.com
+Date: Sun, 25 May 2008 00:38:18 -0700
+Subject: [PATCH] testing bare address in from header
+
+commit message
+---
+patch
diff --git a/t/t5100/sample.mbox b/t/t5100/sample.mbox
index d7ca79b1fc..4bf7947b41 100644
--- a/t/t5100/sample.mbox
+++ b/t/t5100/sample.mbox
@@ -500,3 +500,4 @@ index 3e5fe51..aabfe5c 100644
 1.6.0.rc2
 
 --=-=-=--
+
diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh
index a3c8941c72..8ced59321e 100755
--- a/t/t6300-for-each-ref.sh
+++ b/t/t6300-for-each-ref.sh
@@ -262,4 +262,14 @@ for i in "--perl --shell" "-s --python" "--python --tcl" "--tcl --perl"; do
 	"
 done
 
+test_expect_success 'an unusual tag with an incomplete line' '
+
+	git tag -m "bogo" bogo &&
+	bogo=$(git cat-file tag bogo) &&
+	bogo=$(printf "%s" "$bogo" | git mktag) &&
+	git tag -f bogo "$bogo" &&
+	git for-each-ref --format "%(body)" refs/tags/bogo
+
+'
+
 test_done
diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh
index 5eeb6c2b27..dbc90bc416 100755
--- a/t/t7600-merge.sh
+++ b/t/t7600-merge.sh
@@ -488,4 +488,23 @@ test_expect_success 'merge c1 with c1 and c2' '
 
 test_debug 'gitk --all'
 
+test_expect_success 'merge fast-forward in a dirty tree' '
+       git reset --hard c0 &&
+       mv file file1 &&
+       cat file1 >file &&
+       rm -f file1 &&
+       git merge c2
+'
+
+test_debug 'gitk --all'
+
+test_expect_success 'in-index merge' '
+	git reset --hard c0 &&
+	git merge --no-ff -s resolve c1 > out &&
+	grep "Wonderful." out &&
+	verify_parents $c0 $c1
+'
+
+test_debug 'gitk --all'
+
 test_done
diff --git a/t/t7605-merge-resolve.sh b/t/t7605-merge-resolve.sh
index ee21a107fd..f1f86ddb23 100755
--- a/t/t7605-merge-resolve.sh
+++ b/t/t7605-merge-resolve.sh
@@ -36,7 +36,9 @@ test_expect_success 'merge c1 to c2' '
 	git diff --exit-code &&
 	test -f c0.c &&
 	test -f c1.c &&
-	test -f c2.c
+	test -f c2.c &&
+	test 3 = $(git ls-tree -r HEAD | wc -l) &&
+	test 3 = $(git ls-files | wc -l)
 '
 
 test_expect_success 'merge c2 to c3 (fails)' '
diff --git a/templates/Makefile b/templates/Makefile
index 9f3f1fc352..cc3fc3094c 100644
--- a/templates/Makefile
+++ b/templates/Makefile
@@ -48,4 +48,4 @@ clean:
 install: all
 	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(template_instdir_SQ)'
 	(cd blt && $(TAR) cf - .) | \
-	(cd '$(DESTDIR_SQ)$(template_instdir_SQ)' && umask 022 && $(TAR) xf -)
+	(cd '$(DESTDIR_SQ)$(template_instdir_SQ)' && umask 022 && $(TAR) xfo -)
diff --git a/unpack-trees.c b/unpack-trees.c
index cba0aca062..ef21c62195 100644
--- a/unpack-trees.c
+++ b/unpack-trees.c
@@ -376,6 +376,7 @@ int unpack_trees(unsigned len, struct tree_desc *t, struct unpack_trees_options
 	state.refresh_cache = 1;
 
 	memset(&o->result, 0, sizeof(o->result));
+	o->result.initialized = 1;
 	if (o->src_index)
 		o->result.timestamp = o->src_index->timestamp;
 	o->merge_size = len;