Allow the directory in which reference backends store their data to
be specified.
* kn/ref-location:
refs: add GIT_REFERENCE_BACKEND to specify reference backend
refs: allow reference location in refstorage config
refs: receive and use the reference storage payload
refs: move out stub modification to generic layer
refs: extract out `refs_create_refdir_stubs()`
setup: don't modify repo in `create_reference_database()`
An upcoming commit will add support for providing an URI via the
'extensions.refStorage' config. The URI will contain the reference
backend and a corresponding payload. The payload can be then used for
providing an alternate locations for the reference backend.
To prepare for this, modify the existing backends to accept such an
argument when initializing via the 'init()' function. Both the files
and reftable backends will parse the information to be filesystem paths
to store references. Given that no callers pass any payload yet this is
essentially a no-op change for now.
To enable this, provide a 'refs_compute_filesystem_location()' function
which will parse the current 'gitdir' and the 'payload' to provide the
final reference directory and common reference directory (if working in
a linked worktree).
The documentation and tests will be added alongside the extension of the
config variable.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating the reftable reference backend on disk, we create stubs to
ensure that the directory can be recognized as a Git repository. This is
done by calling `refs_create_refdir_stubs()`. Move this to the generic
layer as this is needed for all backends excluding from the files
backends. In an upcoming commit where we introduce alternate reference
backend locations, we'll have to also create stubs in the $GIT_DIR
irrespective of the backend being used. This commit builds the base to
add that logic.
Similarly, move the logic for deletion of stubs to the generic layer.
The files backend recursively calls the remove function of the
'packed-backend', here skip calling the generic function since that
would try to delete stubs.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace calls to `refs_for_each_rawref()` with the newly introduced
`refs_for_each_ref_ext()` function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The enum `do_for_each_ref_flags` and its individual values don't match
to our current best practices when it comes to naming things. Rename it
to `refs_for_each_flag`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of code paths that started using batched ref update API
(after Git 2.51 or so) lost detailed error output, which have been
corrected.
* kn/ref-batch-output-error-reporting-fix:
fetch: delay user information post committing of transaction
receive-pack: utilize rejected ref error details
fetch: utilize rejected ref error details
update-ref: utilize rejected error details if available
refs: add rejection detail to the callback function
refs: skip to next ref when current ref is rejected
A handful of code paths that started using batched ref update API
(after Git 2.51 or so) lost detailed error output, which have been
corrected.
* kn/ref-batch-output-error-reporting-fix:
fetch: delay user information post committing of transaction
receive-pack: utilize rejected ref error details
fetch: utilize rejected ref error details
update-ref: utilize rejected error details if available
refs: add rejection detail to the callback function
refs: skip to next ref when current ref is rejected
In `refs_verify_refnames_available()` we have two nested loops: the
outer loop iterates over all references to check, while the inner loop
checks for filesystem conflicts for a given ref by breaking down its
path.
With batched updates, when we detect a filesystem conflict, we mark the
update as rejected and execute 'continue'. However, this only skips to
the next iteration of the inner loop, not the outer loop as intended.
This causes the same reference to be repeatedly rejected. Fix this by
using a goto statement to skip to the next reference in the outer loop.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit we'll introduce new generic checks for direct
refs. These checks will be independent of the actual backend.
Introduce a new function `refs_fsck_ref()` that will be used for this
purpose. At the current point in time it's still empty, but it will get
populated in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The consistency checks for the "files" backend contain a couple of
verifications for symrefs that verify generic properties of the target
reference. These properties need to hold for every backend, no matter
whether it's using the "files" or "reftable" backend.
Reimplementing these checks for every single backend doesn't really make
sense. Extract it into a generic `refs_fsck_symref()` function that can
be used by other backends, as well. The "reftable" backend will be wired
up in a subsequent commit.
While at it, improve the consistency checks so that we don't complain
about refs pointing to a non-ref target in case the target refname
format does not verify. Otherwise it's very likely that we'll generate
both error messages, which feels somewhat redundant in this case.
Note that the function has a couple of `UNUSED` parameters. These will
become referenced in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the "files" backend already knows to perform consistency checks
for the "refs/" hierarchy, it doesn't verify any of its root refs. Plug
this omission.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error handling when verifying symbolic refs is a bit on the wild
side:
- `fsck_report_ref()` can be told to ignore specific errors. If an
error has been ignored and a previous check raised an unignored
error, then assigning `ret = fsck_report_ref()` will cause us to
swallow the previous error.
- When the target reference is not valid we bail out early without
checking for other errors.
Fix both of these issues by consistently or'ing the return value and not
bailing out early.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking the consistency of references we create a directory
iterator and then verify each single reference in a loop. The logic to
perform the actual checks is embedded into that loop, which makes it
hard to reuse. But In a subsequent commit we're about to introduce a
second path that wants to verify references.
Prepare for this by extracting the logic to check a single reference
into a standalone function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `files_fsck_refs()` only has a single callsite and forwards
all of its arguments as-is, so it's basically a useless indirection.
Inline the function call.
While at it, also remove the bitwise or that we have for return values.
We don't really want to or them at all, but rather just want to return
an error in case either of the functions has failed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameter `refs_check_dir` determines which directory we want to
check references for. But as we always want to check the complete
refs hierarchy, this parameter is always set to "refs".
Drop the parameter and hardcode it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing consistency checks we pass the functions that perform
the verification down the calling stack. This is somewhat unnecessary
though, as the set of functions doesn't ever change.
Simplify the code by moving the array into global scope and remove the
parameter.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When iterating through root refs we first need to determine the
directory in which the refs live. This is done by retrieving the root of
the loose refs via `refs->loose->root->name`, and putting it through
`files_ref_path()` to derive the final path.
This is somewhat redundant though: the root name of the loose files
cache is always going to be the empty string. As such, we always end up
passing that empty string to `files_ref_path()` as the ref hierarchy we
want to start. And this actually makes sense: `files_ref_path()` already
computes the location of the root directory, so of course we need to
pass the empty string for the ref hierarchy itself. So going via the
loose ref cache to figure out that the root of a ref hierarchy is empty
is only causing confusion.
But next to the added confusion, it can also lead to a segfault. The
loose ref cache is populated lazily, so it may not always be set. It
seems to be sheer luck that this is a condition we do not currently hit.
The right thing to do would be to call `get_loose_ref_cache()`, which
knows to populate the cache if required.
Simplify the code and fix the potential segfault by simply removing the
indirection via the loose ref cache completely.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git maintenance" command learned "is-needed" subcommand to tell if
it is necessary to perform various maintenance tasks.
* kn/maintenance-is-needed:
maintenance: add 'is-needed' subcommand
maintenance: add checking logic in `pack_refs_condition()`
refs: add a `optimize_required` field to `struct ref_storage_be`
reftable/stack: add function to check if optimization is required
reftable/stack: return stack segments directly
Code clean-up.
* kn/refs-optim-cleanup:
t/pack-refs-tests: move the 'test_done' to callees
refs: rename 'pack_refs_opts' to 'refs_optimize_opts'
refs: move to using the '.optimize' functions
Some ref backend storage can hold not just the object name of an
annotated tag, but the object name of the object the tag points at.
The code to handle this information has been streamlined.
* ps/ref-peeled-tags:
t7004: do not chdir around in the main process
ref-filter: fix stale parsed objects
ref-filter: parse objects on demand
ref-filter: detect broken tags when dereferencing them
refs: don't store peeled object IDs for invalid tags
object: add flag to `peel_object()` to verify object type
refs: drop infrastructure to peel via iterators
refs: drop `current_ref_iter` hack
builtin/show-ref: convert to use `reference_get_peeled_oid()`
ref-filter: propagate peeled object ID
upload-pack: convert to use `reference_get_peeled_oid()`
refs: expose peeled object ID via the iterator
refs: refactor reference status flags
refs: fully reset `struct ref_iterator::ref` on iteration
refs: introduce `.ref` field for the base iterator
refs: introduce wrapper struct for `each_ref_fn`
To allow users of the refs namespace to check if the reference backend
requires optimization, add a new field `optimize_required` field to
`struct ref_storage_be`. This field is of type `optimize_required_fn`
which is also introduced in this commit.
Modify the debug, files, packed and reftable backend to implement this
field. A following commit will expose this via 'git pack-refs' and 'git
refs optimize'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kn/refs-optim-cleanup:
t/pack-refs-tests: move the 'test_done' to callees
refs: rename 'pack_refs_opts' to 'refs_optimize_opts'
refs: move to using the '.optimize' functions
* ps/ref-peeled-tags: (23 commits)
t7004: do not chdir around in the main process
ref-filter: fix stale parsed objects
ref-filter: parse objects on demand
ref-filter: detect broken tags when dereferencing them
refs: don't store peeled object IDs for invalid tags
object: add flag to `peel_object()` to verify object type
refs: drop infrastructure to peel via iterators
refs: drop `current_ref_iter` hack
builtin/show-ref: convert to use `reference_get_peeled_oid()`
ref-filter: propagate peeled object ID
upload-pack: convert to use `reference_get_peeled_oid()`
refs: expose peeled object ID via the iterator
refs: refactor reference status flags
refs: fully reset `struct ref_iterator::ref` on iteration
refs: introduce `.ref` field for the base iterator
refs: introduce wrapper struct for `each_ref_fn`
builtin/repo: add progress meter for structure stats
builtin/repo: add keyvalue and nul format for structure stats
builtin/repo: add object counts in structure output
builtin/repo: introduce structure subcommand
...
The previous commit removed all references to 'pack_refs()' within
the refs subsystem. Continue this cleanup by also renaming
'pack_refs_opts' to 'refs_optimize_opts' and the respective flags
accordingly. Keeping the naming consistent will make the code easier to
maintain.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `struct ref_store` variable exposes two ways to optimize a reftable
backend:
1. pack_refs
2. optimize
The former was specific to the 'files' + 'packed' refs backend. The
latter is more generic and covers all backends. While the naming is
different, both of these functions perform the same functionality.
Consolidate this code to only maintain the 'optimize' functions. Do this
by modifying the backends so that they exclusively implement the
`optimize` callback, only. All users of the refs subsystem already use
the 'optimize' function so there is no changes needed on the callee
side. Finally, cleanup all references to the 'pack_refs' field of the
structure and code around it.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the peeled object ID gets propagated via the `struct reference`
there is no need anymore to call into the reference iterator itself to
dereference an object. Remove this infrastructure.
Most of the changes are straight-forward deletions of code. There is one
exception though in `refs/packed-backend.c::write_with_updates()`. Here
we stop peeling the iterator and instead just pass the peeled object ID
of that iterator directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The base iterator has a couple of fields that tracks the name, target,
object ID and flags for the current reference. Due to this design we
have to create a new `struct reference` whenever we want to hand over
that reference to the callback function, which is tedious and not very
efficient.
Convert the structure to instead contain a `struct reference` as member.
This member is expected to be populated by the implementations of the
iterator and is handed over to the callback directly.
While at it, simplify `should_pack_ref()` to take a `struct reference`
directly instead of passing its respective fields.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `each_ref_fn` callback function type is used across our code base
for several different functions that iterate through reference. There's
a bunch of callbacks implementing this type, which makes any changes to
the callback signature extremely noisy. An example of the required churn
is e8207717f1 (refs: add referent to each_ref_fn, 2024-08-09): adding a
single argument required us to change 48 files.
It was already proposed back then [1] that we might want to introduce a
wrapper structure to alleviate the pain going forward. While this of
course requires the same kind of global refactoring as just introducing
a new parameter, it at least allows us to more change the callback type
afterwards by just extending the wrapper structure.
One counterargument to this refactoring is that it makes the structure
more opaque. While it is obvious which callsites need to be fixed up
when we change the function type, it's not obvious anymore once we use
a structure. That being said, we only have a handful of sites that
actually need to populate this wrapper structure: our ref backends,
"refs/iterator.c" as well as very few sites that invoke the iterator
callback functions directly.
Introduce this wrapper structure so that we can adapt the iterator
interfaces more readily.
[1]: <ZmarVcF5JjsZx0dl@tanuki>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Symlink symref" has been added to the list of things that will
disappear at Git 3.0 boundary.
* ps/symlink-symref-deprecation:
refs/files: deprecate writing symrefs as symbolic links
Deal more gracefully with directory / file conflicts when the files
backend is used for ref storage, by failing only the ones that are
involved in the conflict while allowing others.
* kn/refs-files-case-insensitive:
refs/files: handle D/F conflicts during locking
refs/files: handle F/D conflicts in case-insensitive FS
refs/files: use correct error type when lock exists
refs/files: catch conflicts on case-insensitive file-systems
"git refs migrate" to migrate the reflog entries from a refs
backend to another had a handful of bugs squashed.
* ps/reflog-migrate-fixes:
refs: fix invalid old object IDs when migrating reflogs
refs: stop unsetting REF_HAVE_OLD for log-only updates
refs/files: detect race when generating reflog entry for HEAD
refs: fix identity for migrated reflogs
ident: fix type of string length parameter
builtin/reflog: implement subcommand to write new entries
refs: export `ref_transaction_update_reflog()`
builtin/reflog: improve grouping of subcommands
Documentation/git-reflog: convert to use synopsis type
The "files" backend has the ability to store symbolic refs as symbolic
links, which can be configured via "core.preferSymlinkRefs". This
feature stems back from the early days: the initial implementation of
symbolic refs used symlinks exclusively. The symref format was only
introduced in 9b143c6e15 (Teach update-ref about a symbolic ref stored
in a textfile., 2005-09-25) and made the default in 9f0bb90d16
(core.prefersymlinkrefs: use symlinks for .git/HEAD, 2006-05-02).
This is all about 20 years ago, and there are no known reasons nowadays
why one would want to use symlinks instead of symrefs. Mark the feature
for deprecation in Git 3.0.
Note that this only deprecates _writing_ symrefs as symbolic links.
Reading such symrefs is still supported for now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reftable backend learned to sanity check its on-disk data more
carefully.
* kn/reftable-consistency-checks:
refs/reftable: add fsck check for checking the table name
reftable: add code to facilitate consistency checks
fsck: order 'fsck_msg_type' alphabetically
Documentation/fsck-msgids: remove duplicate msg id
reftable: check for trailing newline in 'tables.list'
refs: move consistency check msg to generic layer
refs: remove unused headers
When `NO_SYMLINK_HEAD` is defined, `create_ref_symlink()` is hard-coded
as `(-1)`, and as a consequence the condition `!create_ref_symlink()`
always evaluates to false, rendering any code guarded by that condition
unreachable.
Therefore, clang is _technically_ correct when it complains about
unreachable code. It does completely miss the fact that this is okay
because on _other_ platforms, where `NO_SYMLINK_HEAD` is not defined,
the code isn't unreachable at all.
Let's use the same trick as in 82e79c6364 (git-compat-util: add
NOT_CONSTANT macro and use it in atfork_prepare(), 2025-03-17) to
appease clang while at the same time keeping the `-Wunreachable` flag
to potentially find _actually_ unreachable code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The files-backend prints a message before the consistency checks run.
Move this to the generic layer so both the files and reftable backend
can benefit from this message.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 'refs/' namespace, some of the included header files are not
needed, let's remove them.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git refs optimize" is added for not very well explained reason
despite it does the same thing as "git pack-refs"...
* ms/refs-optimize:
t: add test for git refs optimize subcommand
t0601: refactor tests to be shareable
builtin/refs: add optimize subcommand
doc: pack-refs: factor out common options
builtin/pack-refs: factor out core logic into a shared library
builtin/pack-refs: convert to use the generic refs_optimize() API
reftable-backend: implement 'optimize' action
files-backend: implement 'optimize' action
refs: add a generic 'optimize' API
Deal more gracefully with directory / file conflicts when the files
backend is used for ref storage, by failing only the ones that are
involved in the conflict while allowing others.
* kn/refs-files-case-insensitive:
refs/files: handle D/F conflicts during locking
refs/files: handle F/D conflicts in case-insensitive FS
refs/files: use correct error type when lock exists
refs/files: catch conflicts on case-insensitive file-systems
With the generic `refs_optimize()` API now in place, provide the first
implementation for the 'files' reference backend. This makes the new API
functional for existing repositories and serves as the foundation for
migrating user-facing commands to the new architecture.
The implementation simply calls the existing `files_pack_refs()`
function, as 'packing' is the method used to optimize the files-based
reference store.
Wire up the new `files_optimize()` function to the `optimize` slot in
the files backend's virtual table.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Meet Soni <meetsoni3017@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added the necessary validation and checks for F/D
conflicts in the files backend when working on case insensitive systems.
There is still a possibility for D/F conflicts. This is a different from
the F/D since for F/D conflicts, there would not be a conflict during
the lock creation phase:
refs/heads/foo.lock
refs/heads/foo/bar.lock
However there would be a conflict when the locks are committed, since we
cannot have 'refs/heads/foo/bar' and 'refs/heads/foo'. These kinds of
conflicts are checked and resolved in
`refs_verify_refnames_available()`, so the previous commit ensured that
for case-insensitive filesystems, we would lowercase the inputs to that
function.
For D/F conflicts, there is a conflict during the lock creation phase
itself:
refs/heads/foo/bar.lock
refs/heads/foo.lock
As in `lock_raw_ref()` after creating the lock, we also check for D/F
conflicts. This can occur in case-insensitive filesystems when trying to
fetch case-conflicted references like:
refs/heads/Foo/new
refs/heads/foo
D/F conflicts can also occur in case-sensitive filesystems, when the
repository already contains a directory with a lock file
'refs/heads/foo/bar.lock' and trying to fetch 'refs/heads/foo'. This
doesn't concern directories containing garbage files as those are
handled on a higher level.
To fix this, simply categorize the error as a name conflict. Also remove
this reference from the list of valid refnames for availability checks.
By categorizing the error and removing it from the list of valid
references, batched updates now knows to reject such reference updates
and apply the other reference updates.
Fix a small typo in `ref_transaction_maybe_set_rejected()` while here.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the files-backend on case-insensitive filesystems, there is
possibility of hitting F/D conflicts when creating references within a
single transaction, such as:
- 'refs/heads/foo'
- 'refs/heads/Foo/bar'
Ideally such conflicts are caught in `refs_verify_refnames_available()`
which is responsible for checking F/D conflicts within a given
transaction. This utility function is shared across the reference
backends. As such, it doesn't consider the issues of using a
case-insensitive file system, which only affects the files-backend.
While one solution would be to make the function aware of such issues,
this feels like leaking implementation details of file-backend specific
issues into the utility function. So opt for the more simpler option, of
lowercasing all references sent to this function when on a
case-insensitive filesystem and operating on the files-backend.
To do this, simply use a `struct strbuf` to convert the refname to
lowercase and append it to the list of refnames to be checked. Since we
use a `struct strbuf` and the memory is cleared right after, make sure
that the string list duplicates all provided string.
Without this change, the user would simply be left with a repository
with '.lock' files which were created in the 'prepare' phase of the
transaction, as the 'commit' phase would simply abort and not do the
necessary cleanup.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching references into a repository, if a lock for a particular
reference exists, then `lock_raw_ref()` throws:
- REF_TRANSACTION_ERROR_CASE_CONFLICT: when there is a conflict
because the transaction contains conflicting references while being
on a case-insensitive filesystem.
- REF_TRANSACTION_ERROR_GENERIC: for all other errors.
The latter causes the entire set of batched updates to fail, even in
case sensitive filessystems.
Instead, return a 'REF_TRANSACTION_ERROR_CREATE_EXISTS' error. This
allows batched updates to reject the individual update which conflicts
with the existing file, while updating the rest of the references.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the 'prepare' phase of a reference transaction in the files
backend, we create the lock files for references to be created. When
using batched updates on case-insensitive filesystems, the entire
batched updates would be aborted if there are conflicting names such as:
refs/heads/Foo
refs/heads/foo
This affects all commands which were migrated to use batched updates in
Git 2.51, including 'git-fetch(1)' and 'git-receive-pack(1)'. Before
that, reference updates would be applied serially with one transaction
used per update. When users fetched multiple references on
case-insensitive systems, subsequent references would simply overwrite
any earlier references. So when fetching:
refs/heads/foo: 5f34ec0bfeac225b1c854340257a65b106f70ea6
refs/heads/Foo: ec3053b0977e83d9b67fc32c4527a117953994f3
refs/heads/sample: 2eefd1150e06d8fca1ddfa684dec016f36bf4e56
The user would simply end up with:
refs/heads/foo: ec3053b0977e83d9b67fc32c4527a117953994f3
refs/heads/sample: 2eefd1150e06d8fca1ddfa684dec016f36bf4e56
This is buggy behavior since the user is never informed about the
overrides performed and missing references. Nevertheless, the user is
left with a working repository with a subset of the references. Since
Git 2.51, in such situations fetches would simply fail without updating
any references. Which is also buggy behavior and worse off since the
user is left without any references.
The error is triggered in `lock_raw_ref()` where the files backend
attempts to create a lock file. When a lock file already exists the
function returns a 'REF_TRANSACTION_ERROR_GENERIC'. When this happens,
the entire batched updates, not individual operation, is aborted as if
it were in a transaction.
Change this to return 'REF_TRANSACTION_ERROR_CASE_CONFLICT' instead to
aid the batched update mechanism to simply reject such errors. The
change only affects batched updates since batched updates will reject
individual updates with non-generic errors. So specifically this would
only affect:
1. git fetch
2. git receive-pack
3. git update-ref --batch-updates
This bubbles the error type up to `files_transaction_prepare()` which
tries to lock each reference update. So if the locking fails, we check
if the rejection type can be ignored, which is done by calling
`ref_transaction_maybe_set_rejected()`.
As the error type is now 'REF_TRANSACTION_ERROR_CASE_CONFLICT',
the specific reference update would simply be rejected, while other
updates in the transaction would continue to be applied. This allows
partial application of references in case-insensitive filesystems when
fetching colliding references.
While the earlier implementation allowed the last reference to be
applied overriding the initial references, this change would allow the
first reference to be applied while rejecting consequent collisions.
This should be an okay compromise since with the files backend, there is
no scenario possible where we would retain all colliding references.
Let's also be more proactive and notify users on case-insensitive
filesystems about such problems by providing a brief about the issue
while also recommending using the reftable backend, which doesn't have
the same issue.
Reported-by: Joe Drew <joe.drew@indexexchange.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" can clobber a symref that is dangling when the
remote-tracking HEAD is set to auto update, which has been
corrected.
* jk/no-clobber-dangling-symref-with-fetch:
refs: do not clobber dangling symrefs
t5510: prefer "git -C" to subshell for followRemoteHEAD tests
t5510: stop changing top-level working directory
t5510: make confusing config cleanup more explicit
"git remote rename origin upstream" failed to move origin/HEAD to
upstream/HEAD when origin/HEAD is unborn and performed other
renames extremely inefficiently, which has been corrected.
* ps/remote-rename-fix:
builtin/remote: only iterate through refs that are to be renamed
builtin/remote: rework how remote refs get renamed
builtin/remote: determine whether refs need renaming early on
builtin/remote: fix sign comparison warnings
refs: simplify logic when migrating reflog entries
refs: pass refname when invoking reflog entry callback
