The object reachability bitmap machinery and the partial cloning
machinery were not prepared to work well together, because some
object-filtering criteria that partial clones use inherently rely
on object traversal, but the bitmap machinery is an optimization
to bypass that object traversal. There however are some cases
where they can work together, and they were taught about them.
* jk/object-filter-with-bitmap:
rev-list --count: comment on the use of count_right++
pack-objects: support filters with bitmaps
pack-bitmap: implement BLOB_LIMIT filtering
pack-bitmap: implement BLOB_NONE filtering
bitmap: add bitmap_unset() function
rev-list: use bitmap filters for traversal
pack-bitmap: basic noop bitmap filter infrastructure
rev-list: allow commit-only bitmap traversals
t5310: factor out bitmap traversal comparison
rev-list: allow bitmaps when counting objects
rev-list: make --count work with --objects
rev-list: factor out bitmap-optimized routines
pack-bitmap: refuse to do a bitmap traversal with pathspecs
rev-list: fallback to non-bitmap traversal when filtering
pack-bitmap: fix leak of haves/wants object lists
pack-bitmap: factor out type iterator initialization
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
"git config" learned to show in which "scope", in addition to in
which file, each config setting comes from.
* mr/show-config-scope:
config: add '--show-scope' to print the scope of a config value
submodule-config: add subomdule config scope
config: teach git_config_source to remember its scope
config: preserve scope in do_git_config_sequence
config: clarify meaning of command line scoping
config: split repo scope to local and worktree
config: make scope_name non-static and rename it
t1300: create custom config file without special characters
t1300: fix over-indented HERE-DOCs
config: fix typo in variable name
Memory footprint and performance of "git name-rev" has been
improved.
* rs/name-rev-memsave:
name-rev: sort tip names before applying
name-rev: release unused name strings
name-rev: generate name strings only if they are better
name-rev: pre-size buffer in get_parent_name()
name-rev: factor out get_parent_name()
name-rev: put struct rev_name into commit slab
name-rev: don't _peek() in create_or_update_name()
name-rev: don't leak path copy in name_ref()
name-rev: respect const qualifier
name-rev: remove unused typedef
name-rev: rewrite create_or_update_name()
The code to compute the commit-graph has been taught to use a more
robust way to tell if two object directories refer to the same
thing.
* tb/commit-graph-object-dir:
commit-graph.h: use odb in 'load_commit_graph_one_fd_st'
commit-graph.c: remove path normalization, comparison
commit-graph.h: store object directory in 'struct commit_graph'
commit-graph.h: store an odb in 'struct write_commit_graph_context'
t5318: don't pass non-object directory to '--object-dir'
The index-pack code now diagnoses a bad input packstream that
records the same object twice when it is used as delta base; the
code used to declare a software bug when encountering such an
input, but it is an input error.
* jk/index-pack-dupfix:
index-pack: downgrade twice-resolved REF_DELTA to die()
The way "git submodule status" reports an initialized but not yet
populated submodule has not been reimplemented correctly when a
part of the "git submodule" command was rewritten in C, which has
been corrected.
* pk/status-of-uncloned-submodule:
t7400: testcase for submodule status on unregistered inner git repos
submodule: fix status of initialized but not cloned submodules
t7400: add a testcase for submodule status on empty dirs
Some codepaths were given a repository instance as a parameter to
work in the repository, but passed the_repository instance to its
callees, which has been cleaned up (somewhat).
* mt/use-passed-repo-more-in-funcs:
sha1-file: allow check_object_signature() to handle any repo
sha1-file: pass git_hash_algo to hash_object_file()
sha1-file: pass git_hash_algo to write_object_file_prepare()
streaming: allow open_istream() to handle any repo
pack-check: use given repo's hash_algo at verify_packfile()
cache-tree: use given repo's hash_algo at verify_one()
diff: make diff_populate_filespec() honor its repo argument
Some rough edges in the sparse-checkout feature, especially around
the cone mode, have been cleaned up.
* ds/sparse-checkout-harden:
sparse-checkout: fix cone mode behavior mismatch
sparse-checkout: improve docs around 'set' in cone mode
sparse-checkout: escape all glob characters on write
sparse-checkout: use C-style quotes in 'list' subcommand
sparse-checkout: unquote C-style strings over --stdin
sparse-checkout: write escaped patterns in cone mode
sparse-checkout: properly match escaped characters
sparse-checkout: warn on globs in cone patterns
sparse-checkout: detect short patterns
sparse-checkout: cone mode does not recognize "**"
sparse-checkout: fix documentation typo for core.sparseCheckoutCone
clone: fix --sparse option with URLs
sparse-checkout: create leading directories
t1091: improve here-docs
t1091: use check_files to reduce boilerplate
Unneeded connectivity check is now disabled in a partial clone when
fetching into it.
* jt/connectivity-check-optim-in-partial-clone:
fetch: forgo full connectivity check if --filter
connected: verify promisor-ness of partial clone
"git rebase -i" (and friends) used to unnecessarily check out the
tip of the branch to be rebased, which has been corrected.
* ag/rebase-avoid-unneeded-checkout:
rebase -i: stop checking out the tip of the branch to rebase
Traditionally, we avoided threaded grep while searching in objects
(as opposed to files in the working tree) as accesses to the object
layer is not thread-safe. This limitation is getting lifted.
* mt/threaded-grep-in-object-store:
grep: use no. of cores as the default no. of threads
grep: move driver pre-load out of critical section
grep: re-enable threads in non-worktree case
grep: protect packed_git [re-]initialization
grep: allow submodule functions to run in parallel
submodule-config: add skip_if_read option to repo_read_gitmodules()
grep: replace grep_read_mutex by internal obj read lock
object-store: allow threaded access to object reading
replace-object: make replace operations thread-safe
grep: fix racy calls in grep_objects()
grep: fix race conditions at grep_submodule()
grep: fix race conditions on userdiff calls
Two help messages given when "git add" notices the user gave it
nothing to add have been updated to use advise() API.
* hw/advice-add-nothing:
add: change advice config variables used by the add API
add: use advise function to display hints
Just as rev-list recently learned to combine filters and bitmaps, let's
do the same for pack-objects. The infrastructure is all there; we just
need to pass along our filter options, and the pack-bitmap code will
decide to use bitmaps or not.
This unsurprisingly makes things faster for partial clones of large
repositories (here we're cloning linux.git):
Test HEAD^ HEAD
------------------------------------------------------------------------------
5310.11: simulated partial clone 38.94(37.28+5.87) 11.06(11.27+4.07) -71.6%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just passes the filter-options struct to prepare_bitmap_walk().
Since the bitmap code doesn't actually support any filters yet, it will
fallback to the non-bitmap code if any --filter is specified. But this
lets us exercise that rejection code path, as well as getting us ready
to test filters via rev-list when we _do_ support them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently you can't use object filters with bitmaps, but we plan to
support at least some filters with bitmaps. Let's introduce some
infrastructure that will help us do that:
- prepare_bitmap_walk() now accepts a list_objects_filter_options
parameter (which can be NULL for no filtering; all the current
callers pass this)
- we'll bail early if the filter is incompatible with bitmaps (just as
we would if there were no bitmaps at all). Currently all filters are
incompatible.
- we'll filter the resulting bitmap; since there are no supported
filters yet, this is always a noop.
There should be no behavior change yet, but we'll support some actual
filters in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since we added reachability bitmap support, we've been able to use
it with rev-list to get the full list of objects, like:
git rev-list --objects --use-bitmap-index --all
But you can't do so without --objects, since we weren't ready to just
show the commits. However, the internals of the bitmap code are mostly
ready for this: they avoid opening up trees when walking to fill in the
bitmaps. We just need to actually pass in the rev_info to
traverse_bitmap_commit_list() so it knows which types to bother
triggering our callback for.
For completeness, the perf test now covers both the existing --objects
case, as well as the new commits-only behavior (the objects one got way
faster when we introduced bitmaps, but obviously isn't improved now).
Here are numbers for linux.git:
Test HEAD^ HEAD
------------------------------------------------------------------------
5310.7: rev-list (commits) 8.29(8.10+0.19) 1.76(1.72+0.04) -78.8%
5310.8: rev-list (objects) 8.06(7.94+0.12) 8.14(7.94+0.13) +1.0%
That run was cheating a little, as I didn't have any commit-graph in the
repository, and we'd built it by default these days when running git-gc.
Here are numbers with a commit-graph:
Test HEAD^ HEAD
------------------------------------------------------------------------
5310.7: rev-list (commits) 0.70(0.58+0.12) 0.51(0.46+0.04) -27.1%
5310.8: rev-list (objects) 6.20(6.09+0.10) 6.27(6.16+0.11) +1.1%
Still an improvement, but a lot less impressive.
We could have the perf script remove any commit-graph to show the
out-sized effect, but it probably makes sense to leave it in what would
be a more typical setup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prior commit taught "--count --objects" to work without bitmaps. We
should be able to get the same answer much more quickly with bitmaps.
Note that we punt on the max_count case here. This perhaps _could_ be
made to work if we find all of the boundary commits and treat them as
UNINTERESTING, subtracting them (and their reachable objects) from the
set we return. That implies an actual commit traversal, but we'd still
be faster due to avoiding opening up any trees. Given the complexity and
the fact that anyone is unlikely to want this, it makes sense to just
fall back to the non-bitmap case for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behavior from "rev-list --count --objects" is nonsensical:
we enumerate all of the objects except commits, but then give a count of
commits. This wasn't planned, and is just what the code happens to do.
Instead, let's give the answer the user almost certainly wanted: the
full count of objects.
Note that there are more complicated cases around cherry-marking, etc.
We'll punt on those for now, but let the user know that we can't produce
an answer (rather than giving them something useless).
We'll test both the new feature as well as a vanilla --count of commits,
since that surprisingly doesn't seem to be covered in the existing
tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few operations in rev-list that are optimized for bitmaps.
Rather than having the code inline in cmd_rev_list(), let's move them
into helpers. This not only makes the flow of the main function simpler,
but it lets us replace the complex "can we do the optimization?"
conditionals with a series of early returns from the functions. That
also makes it easy to add comments explaining those conditions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list has refused to use bitmaps with pathspec limiting since
c8a70d3509 (rev-list: disable --use-bitmap-index when pruning commits,
2015-07-01). But this is true not just for rev-list, but for anyone who
calls prepare_bitmap_walk(); the code isn't equipped to handle this
case. We never noticed because the only other callers would never pass
a pathspec limiter.
But let's push the check down into prepare_bitmap_walk() anyway. That's
a more logical place for it to live, as callers shouldn't need to know
the details (and must be prepared to fall back to a regular traversal
anyway, since there might not be bitmaps in the repository).
It would also prepare us for a day where this case _is_ handled, but
that's pretty unlikely. E.g., we could use bitmaps to generate the set
of commits, and then diff each commit to see if it matches the pathspec.
That would be slightly faster than a naive traversal that actually walks
the commits. But you'd probably do better still to make use of the newer
commit-graph feature to make walking the commits very cheap.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--use-bitmap-index" option is usually aspirational: if we have
bitmaps and the request can be fulfilled more quickly using them we'll
do so, but otherwise fall back to a non-bitmap traversal.
The exception is object filtering, which explicitly dies if the two
options are combined. Let's convert this to the usual fallback behavior.
This is a minor convenience for now (since the caller can easily know
that --filter and --use-bitmap-index don't combine), but will become
much more useful as we start to support _some_ filters with bitmaps, but
not others.
The test infrastructure here is bigger than necessary for checking this
one small feature. But it will serve as the basis for more filtering
bitmap tests in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --no-index" should not get affected by the contents of
the .gitmodules file but when "--recurse-submodules" is given or
the "submodule.recurse" variable is set, it did. Now these
settings are ignored in the "--no-index" mode.
* pb/do-not-recurse-grep-no-index:
grep: ignore --recurse-submodules if --no-index is given
When renaming a remote with
git remote rename X Y
git remote remove X
Git already renames or removes any branch.<name>.remote and
branch.<name>.pushRemote configurations if their value is X.
However remote.pushDefault needs a more gentle approach, as this may be
set in a non-repo configuration file. In such a case only a warning is
printed, such as:
warning: The global configuration remote.pushDefault in:
$HOME/.gitconfig:35
now names the non-existent remote origin
It is changed to remote.pushDefault = Y or removed when set in a repo
configuration though.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming or removing a remote with
git remote rename X Y
git remote remove X
Git already renames/removes any config values from
branch.<name>.remote = X
to
branch.<name>.remote = Y
As branch.<name>.pushRemote also names a remote, it now also renames
or removes these config values from
branch.<name>.pushRemote = X
to
branch.<name>.pushRemote = Y
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some minor clean-ups in function `config_read_branches`:
* remove hardcoded length in `key += 7`
* call `xmemdupz` only once
* use a switch to handle the configuration type and add a `BUG()`
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user queries config values with --show-origin, often it's
difficult to determine what the actual "scope" (local, global, etc.) of
a given value is based on just the origin file.
Teach 'git config' the '--show-scope' option to print the scope of all
displayed config values. Note that we should never see anything of
"submodule" scope as that is only ever used by submodule-config.c when
parsing the '.gitmodules' file.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many situations where the scope of a config command is known
beforehand, such as passing of '--local', '--file', etc. to an
invocation of git config. However, this information is lost when moving
from builtin/config.c to /config.c. This historically hasn't been a big
deal, but to prepare for the upcoming --show-scope option we teach
git_config_source to keep track of the source and the config machinery
to use that information to set current_parsing_scope appropriately.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for inserting a C string into a strbuf. Use it
throughout the source to get rid of magic string length constants and
explicit strlen() calls.
Like strbuf_addstr(), implement it as an inline function to avoid the
implicit strlen() calls to cause runtime overhead.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
advice.addNothing config variable is used to control the visibility of
two advice messages in the add library. This config variable is
replaced by two new variables, whose names are more clear and relevant
to the two cases.
Also add the two new variables to the documentation.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout X" did not correctly fail when X is not a local
branch but could name more than one remote-tracking branches
(i.e. to be dwimmed as the starting point to create a corresponding
local branch), which has been corrected.
* am/checkout-file-and-ref-ref-ambiguity:
checkout: don't revert file on ambiguous tracking branches
parse_branchname_arg(): extract part as new function
The effort to move "git-add--interactive" to C continues.
* js/patch-mode-in-others-in-c:
commit --interactive: make it work with the built-in `add -i`
built-in add -p: implement the "worktree" patch modes
built-in add -p: implement the "checkout" patch modes
built-in stash: use the built-in `git add -p` if so configured
legacy stash -p: respect the add.interactive.usebuiltin setting
built-in add -p: implement the "stash" and "reset" patch modes
built-in add -p: prepare for patch modes other than "stage"
name_ref() is called for each ref and checks if its a better name for
the referenced commit. If that's the case it remembers it and checks if
a name based on it is better for its ancestors as well. This in done in
the the order for_each_ref() imposes on us.
That might not be optimal. If bad names happen to be encountered first
(as defined by is_better_name()), names derived from them may spread to
a lot of commits, only to be replaced by better names later. Setting
better names first can avoid that.
is_better_name() prefers tags, short distances and old references. The
distance is a measure that we need to calculate for each candidate
commit, but the other two properties are not dependent on the
relationships of commits. Sorting the refs by them should yield better
performance than the essentially random order we currently use.
And applying older references first should also help to reduce rework
due to the fact that older commits have less ancestors than newer ones.
So add all details of names to the tip table first, then sort them
to prefer tags and older references and then apply them in this order.
Here's the performance as measures by hyperfine for the Linux repo
before:
Benchmark #1: ./git -C ../linux/ name-rev --all
Time (mean ± σ): 851.1 ms ± 4.5 ms [User: 806.7 ms, System: 44.4 ms]
Range (min … max): 845.9 ms … 859.5 ms 10 runs
... and with this patch:
Benchmark #1: ./git -C ../linux/ name-rev --all
Time (mean ± σ): 736.2 ms ± 8.7 ms [User: 688.4 ms, System: 47.5 ms]
Range (min … max): 726.0 ms … 755.2 ms 10 runs
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
name_rev() assigns a name to a commit and its parents and grandparents
and so on. Commits share their name string with their first parent,
which in turn does the same, recursively to the root. That saves a lot
of allocations. When a better name is found, the old name is replaced,
but its memory is not released. That leakage can become significant.
Can we release these old strings exactly once even though they are
referenced multiple times? Yes, indeed -- we can make use of the fact
that name_rev() visits the ancestors of a commit after it set a new name
for it and tries to update their names as well.
Members of the first ancestral line have the same taggerdate and
from_tag values, but a higher distance value than their child commit at
generation 0. These are the only criteria used by is_better_name().
Lower distance values are considered better, so a name that is better
for a child will also be better for its parent and grandparent etc.
That means we can free(3) an inferior name at generation 0 and rely on
name_rev() to replace all references in ancestors as well.
If we do that then we need to stop using the string pointer alone to
distinguish new empty rev_name slots from initialized ones, though, as
it technically becomes invalid after the free(3) call -- even though its
value is still different from NULL.
We can check the generation value first, as empty slots will have it
initialized to 0, and for the actual generation 0 we'll set a new valid
name right after the create_or_update_name() call that releases the
string.
For the Chromium repo, releasing superceded names reduces the memory
footprint of name-rev --all significantly. Here's the output of GNU
time before:
0.98user 0.48system 0:01.46elapsed 99%CPU (0avgtext+0avgdata 2601812maxresident)k
0inputs+0outputs (0major+571470minor)pagefaults 0swaps
... and with this patch:
1.01user 0.26system 0:01.28elapsed 100%CPU (0avgtext+0avgdata 1559196maxresident)k
0inputs+0outputs (0major+314370minor)pagefaults 0swaps
It also gets faster; hyperfine before:
Benchmark #1: ./git -C ../chromium/src name-rev --all
Time (mean ± σ): 1.534 s ± 0.006 s [User: 1.039 s, System: 0.494 s]
Range (min … max): 1.522 s … 1.542 s 10 runs
... and with this patch:
Benchmark #1: ./git -C ../chromium/src name-rev --all
Time (mean ± σ): 1.338 s ± 0.006 s [User: 1.047 s, System: 0.291 s]
Range (min … max): 1.327 s … 1.346 s 10 runs
For the Linux repo it doesn't pay off; memory usage only gets down from:
0.76user 0.03system 0:00.80elapsed 99%CPU (0avgtext+0avgdata 292848maxresident)k
0inputs+0outputs (0major+44579minor)pagefaults 0swaps
... to:
0.78user 0.03system 0:00.81elapsed 100%CPU (0avgtext+0avgdata 284696maxresident)k
0inputs+0outputs (0major+44892minor)pagefaults 0swaps
The runtime actually increases slightly from:
Benchmark #1: ./git -C ../linux/ name-rev --all
Time (mean ± σ): 828.8 ms ± 5.0 ms [User: 797.2 ms, System: 31.6 ms]
Range (min … max): 824.1 ms … 838.9 ms 10 runs
... to:
Benchmark #1: ./git -C ../linux/ name-rev --all
Time (mean ± σ): 847.6 ms ± 3.4 ms [User: 807.9 ms, System: 39.6 ms]
Range (min … max): 843.4 ms … 854.3 ms 10 runs
Why is that? In the Chromium repo, ca. 44000 free(3) calls in
create_or_update_name() release almost 1GB, while in the Linux repo
240000+ calls release a bit more than 5MB, so the average discarded
name is ca. 1000x longer in the latter.
Overall I think it's the right tradeoff to make, as it helps curb the
memory usage in repositories with big discarded names, and the added
overhead is small.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leave setting the tip_name member of struct rev_name to callers of
create_or_update_name(). This avoids allocations for names that are
rejected by that function. Here's how this affects the runtime when
working with a fresh clone of Git's own repository; performance numbers
by hyperfine before:
Benchmark #1: ./git -C ../git-pristine/ name-rev --all
Time (mean ± σ): 437.8 ms ± 4.0 ms [User: 422.5 ms, System: 15.2 ms]
Range (min … max): 432.8 ms … 446.3 ms 10 runs
... and with this patch:
Benchmark #1: ./git -C ../git-pristine/ name-rev --all
Time (mean ± σ): 408.5 ms ± 1.4 ms [User: 387.2 ms, System: 21.2 ms]
Range (min … max): 407.1 ms … 411.7 ms 10 runs
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can calculate the size of new name easily and precisely. Open-code
the xstrfmt() calls and grow the buffers as needed before filling them.
This provides a surprisingly large benefit when working with the
Chromium repository; here are the numbers measured using hyperfine
before:
Benchmark #1: ./git -C ../chromium/src name-rev --all
Time (mean ± σ): 5.822 s ± 0.013 s [User: 5.304 s, System: 0.516 s]
Range (min … max): 5.803 s … 5.837 s 10 runs
... and with this patch:
Benchmark #1: ./git -C ../chromium/src name-rev --all
Time (mean ± σ): 1.527 s ± 0.003 s [User: 1.015 s, System: 0.511 s]
Range (min … max): 1.524 s … 1.535 s 10 runs
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce nesting by moving code to come up with a name for the parent into
its own function.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit slab commit_rev_name contains a pointer to a struct rev_name,
and the actual struct is allocated separatly. Avoid that allocation and
pointer indirection by storing the full struct in the commit slab. Use
the tip_name member pointer to determine if the returned struct is
initialized.
Performance in the Linux repository measured with hyperfine before:
Benchmark #1: ./git -C ../linux/ name-rev --all
Time (mean ± σ): 953.5 ms ± 6.3 ms [User: 901.2 ms, System: 52.1 ms]
Range (min … max): 945.2 ms … 968.5 ms 10 runs
... and with this patch:
Benchmark #1: ./git -C ../linux/ name-rev --all
Time (mean ± σ): 851.0 ms ± 3.1 ms [User: 807.4 ms, System: 43.6 ms]
Range (min … max): 846.7 ms … 857.0 ms 10 runs
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Look up the commit slab slot for the commit once using
commit_rev_name_at() and populate it in case it is empty, instead of
checking for emptiness in a separate step using commit_rev_name_peek()
via get_commit_rev_name().
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
name_ref() duplicates the path string and passes it to name_rev(), which
either puts it into a commit slab or ignores it if there is already a
better name, leaking it. Move the duplication to name_rev() and release
the copy in the latter case.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep the const qualifier of the first parameter of get_rev_name() even
when casting the object pointer to a commit pointer, and further for the
parameter of get_commit_rev_name(), as all these uses are read-only.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The type alias became unused with bf43abc6e6 (name-rev: use sizeof(*ptr)
instead of sizeof(type) in allocation, 2019-11-12); remove it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code was moved straight out of name_rev(). As such, we inherited
the "goto" to jump from an if into an else-if. We also inherited the
fact that "nothing to do -- return NULL" is handled last.
Rewrite the function to first handle the "nothing to do" case. Then we
can handle the conditional allocation early before going on to populate
the struct. No need for goto-ing.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're resolving a REF_DELTA, we compare-and-swap its type from
REF_DELTA to whatever real type the base object has, as discussed in
ab791dd138 (index-pack: fix race condition with duplicate bases,
2014-08-29). If the old type wasn't a REF_DELTA, we consider that a
BUG(). But as discussed in that commit, we might see this case whenever
we try to resolve an object twice, which may happen because we have
multiple copies of the base object.
So this isn't a bug at all, but rather a sign that the input pack is
broken. And indeed, this case is triggered already in t5309.5 and
t5309.6, which create packs with delta cycles and duplicate bases. But
we never noticed because those tests are marked expect_failure.
Those tests were added by b2ef3d9ebb (test index-pack on packs with
recoverable delta cycles, 2013-08-23), which was leaving the door open
for cases that we theoretically _could_ handle. And when we see an
already-resolved object like this, in theory we could keep going after
confirming that the previously resolved child->real_type matches
base->obj->real_type. But:
- enforcing the "only resolve once" rule here saves us from an
infinite loop in other parts of the code. If we keep going, then the
delta cycle in t5309.5 causes us to loop infinitely, as
find_ref_delta_children() doesn't realize which objects have already
been resolved. So there would be more changes needed to make this
case work, and in the meantime we'd be worse off.
- any pack that triggers this is broken anyway. It either has a
duplicate base object, or it has a cycle which causes us to bring in
a duplicate via --fix-thin. In either case, we'd end up rejecting
the pack in write_idx_file(), which also detects duplicates.
So the tests have little value in documenting what we _could_ be doing
(and have been neglected for 6+ years). Let's switch them to confirming
that we handle this case cleanly (and switch out the BUG() for a more
informative die() so that we do so).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
