We newly handle isatty() by special-casing the stdin/stdout/stderr file
descriptors, caching the return value. However, we missed the case where
dup2() overrides the respective file descriptor.
That poses a problem e.g. where the `show` builtin asks for a pager very
early, the `setup_pager()` function sets the pager depending on the
return value of `isatty()` and then redirects stdout. Subsequently,
`cmd_log_init_finish()` calls `setup_pager()` *again*. What should
happen now is that `isatty()` reports that stdout is *not* a TTY and
consequently stdout should be left alone.
Let's override dup2() to handle this appropriately.
This fixes https://github.com/git-for-windows/git/issues/1077
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This fixes the compilation, actually, as we still did not make the jump to
post-Windows XP completely: we still compile with _WIN32_WINNT set to
0x0502 (which corresponds to Windows Server 2003 and is technically
greater than Windows XP's 0x0501).
However, GetTickCount64() is only available starting with Windows
Vista/Windows Server 2008.
Let's just lazy-load the function, which should also help Git for Windows
contributors who want to reinstate Windows XP support.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
From Visual Studio 2015 Code Analysis: Warning C28159 Consider using
'GetTickCount64' instead of 'GetTickCount'.
Reason: GetTickCount overflows roughly every 49 days. Code that does not
take that into account can loop indefinitely. GetTickCount64 operates on
64 bit values and does not have that problem.
Signed-off-by: Steve Hoelzer <shoelzer@gmail.com>
This topic branch teaches the project generator to generate a Visual
Studio solution, ready to be opened in Visual Studio 2010 or later.
The idea, of course, is to let some automatic build job generate and
commit the project files with
make MSVC=1 vcxproj
and then (force-)push to a special-purpose branch.
The major part of this branch thicket concerns itself not only with
generating the Visual Studio project files, but making sure that the
user can then run the test suite from a regular Git Bash (i.e. *not*
requiring a Git for Windows SDK), e.g. by running
cd t
prove --timer --jobs 15 ./t[0-9]*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch works around an out-of-memory bug when the user
specified a format via --date=format:<format> that strftime() does
not like.
Reported by Stefan Naewe.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For regular debugging, it is pretty helpful when a debug assertion in a
running application triggers a window that offers to start the debugger.
However, when running the test suite, it is not so helpful, in
particular when the debug assertions are then suppressed anyway because
we disable the invalid parameter checking (via invalidcontinue.obj, see
the comment in config.mak.uname about that object for more information).
So let's simply disable that window in Debug Mode (it is already
disabled in Release Mode).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We do have a lovely Makefile option to state that that header file is
not available. Let's use it everywhere...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MS Visual C suggests that the construct
condition ? (int) i : (ptrdiff_t) d
is incorrect. Let's fix this by casting to ptrdiff_t also for the
positive arm of the conditional.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, strftime() does not silently ignore invalid formats, but
warns about them and then returns 0 and sets errno to EINVAL.
Unfortunately, Git does not expect such a behavior, as it disagrees
with strftime()'s semantics on Linux. As a consequence, Git
misinterprets the return value 0 as "I need more space" and grows the
buffer. As the larger buffer does not fix the format, the buffer grows
and grows and grows until we are out of memory and abort.
Ideally, we would switch off the parameter validation just for
strftime(), but we cannot even override the invalid parameter handler
via _set_thread_local_invalid_parameter_handler() using MINGW because
that function is not declared. Even _set_invalid_parameter_handler(),
which *is* declared, does not help, as it simply does... nothing.
So let's just bite the bullet and override strftime() for MINGW and
abort on an invalid format string. While this does not provide the
best user experience, it is the best we can do.
See https://msdn.microsoft.com/en-us/library/fe06s4ak.aspx for more
details.
This fixes https://github.com/git-for-windows/git/issues/863
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The CreateProcessW() function does not really support spaces in its
first argument, lpApplicationName. But it supports passing NULL as
lpApplicationName, which makes it figure out the application from the
(possibly quoted) first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
This fixes https://github.com/git-for-windows/git/issue/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In Git for Windows' SDK, there is already a script to package Git for
Windows as a NuGet package, downloading nuget.exe if needed.
Let's just fall back to using that executable (if it is there) if
nuget.exe was not found in the PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Install required third-party DLLs next to EXEs.
Build and install release mode PDBs for git
executables allowing detailed stack traces
in the event of crash.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
The MINGW version of the main() wrapper gets away with declaring symbols
that were intentionally not exported. However, some of these symbols do
not actually exist in MSVC's UCRT.
So let's add an MSVC version of the main() wrapper that uses wmain() and
imports the UNICODE argv and environment. While at it, we pass our UTF-8
version of ARGV to the real main -- rather than overwriting __argv as is
done in the MINGW Version.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
This special-cases various signals that are not supported on Windows,
such as SIGPIPE. These cause the UCRT to throw asserts (at least in
debug mode).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
This adds MSVC versions of getenv() and friends. These take UTF-8
arguments and return UTF-8 values, but use the UNICODE versions
of the CRT routines. This avoids the need to write to __environ
(which is only visible if you statically link to the CRT). This
also avoids the CP_ACP conversions performed inside the CRT.
It also avoids various memory leaks and problems.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
GCC and MSVC disagree about using the GCC extension _ANONYMOUS_UNION.
Simply skip that offending keyword when compiling with MSVC.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This constant is not defined in MSVC's headers.
In UCRT's fcntl.h, _O_RDONLY, _O_WRONLY and _O_RDWR are defined as 0, 1
and 2, respectively. Yes, that means that UCRT breaks with the tradition
that O_RDWR == O_RDONLY | O_WRONLY.
It is a perfectly legal way to define those constants, though, therefore
we need to take care of defining O_ACCMODE accordingly.
This is particularly important in order to keep our "open() can set
errno to EISDIR" emulation working: it tests that (flags & O_ACCMODE) is
not identical to O_RDONLY before going on to test specifically whether
the file for which open() reported EACCES is, in fact, a directory.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Support -Z flags ("specify PDB options"), only include -l args on link
commands, and force PDBs to be created.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
This commit contains a GNU Makefile and NuGet configuration scripts to
download and install the various third-party libraries that we will need
to build/link with when using VS2015 to build Git.
The file "compat/vcbuild/README_VS2015.txt" contains instructions for
using this.
In this commit, "compat/vcbuild/Makefile" contains hard-coded version
numbers of the packages we require. These are set to the current
versions as of the time of this commit. We use "nuget restore" to
install them explicitly using a "package.config". A future improvement
would try to use some of the automatic package management functions and
eliminate the need to specify exact versions. I tried, but could not
get this to work. NuGet was happy dowload "minimum requirements" rather
than "lastest" for dependencies -- and only look at one package at a
time. For example, both curl and openssl depend upon zlib and have
different minimums. It was unclear which version of zlib would be
installed and seemed to be dependent on the order of the top-level
packages. So, I'm skipping that for now.
We need to be very precise when specifying NuGet package versions: while
nuget.exe auto-completes a version, say, 1.0.2 to 1.0.2.0, we will want
to parse packages.config ourselves, to generate the Visual Studio
solution, and there we need the exact version number to be able to
generate the exact path to the correct .targets file.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
This topic branch introduces a highly-experimental feature allowing to
override stdin/stdout/stderr by setting environment variables e.g. to
named pipes, solving a problem in highly multi-threaded applications
where inheritable handles could cause blocked Git operations.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
`GetLongPathName()` function may fail when it is unable to query
the parent directory of a path component to determine the long name
for that component. It happens, because of it uses `FindFirstFile()`
function for each next short part of path. The `FindFirstFile()`
requires `List Directory` and `Synchronize` desired access for a calling
process.
In case of lacking such permission for some part of path,
the `GetLongPathName()` returns 0 as result and `GetLastError()`
returns ERROR_ACCESS_DENIED.
`GetFinalPathNameByHandle()` function can help in such cases, because
it requires `Read Attributes` and `Synchronize` desired access to the
target path only.
The `GetFinalPathNameByHandle()` function was introduced on
`Windows Server 2008/Windows Vista`. So we need to load it dynamically.
`CreateFile()` parameters:
`lpFileName` = path to the current directory
`dwDesiredAccess` = 0 (it means `Read Attributes` and `Synchronize`)
`dwShareMode` = FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE
(it prevents `Sharing Violation`)
`lpSecurityAttributes` = NULL (default security attributes)
`dwCreationDisposition` = OPEN_EXISTING
(required to obtain a directory handle)
`dwFlagsAndAttributes` = FILE_FLAG_BACKUP_SEMANTICS
(required to obtain a directory handle)
`hTemplateFile` = NULL (when opening an existing file or directory,
`CreateFile` ignores this parameter)
The string that is returned by `GetFinalPathNameByHandle()` function
uses the \\?\ syntax. To skip the prefix and convert backslashes
to slashes, the `normalize_ntpath()` mingw function will be used.
Note: `GetFinalPathNameByHandle()` function returns a final path.
It is the path that is returned when a path is fully resolved.
For example, for a symbolic link named "C:\tmp\mydir" that points to
"D:\yourdir", the final path would be "D:\yourdir".
Signed-off-by: Anton Serbulov <aserbulov@plesk.com>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
On XP, there is no %PROGRAMDATA%, therefore we need to use
"%ALLUSERSPROFILE%\Application Data\Git\config" in those setups.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When switching the current working directory, say, in PowerShell, it is
quite possible to use a different capitalization than the one that is
recorded on disk. While doing the same in `cmd.exe` adjusts the
capitalization magically, that does not happen in PowerShell so that
`getcwd()` returns the current directory in a different way than is
recorded on disk.
Typically this creates no problems except when you call
git log .
in a subdirectory called, say, "GIT/" but you switched to "Git/" and
your `getcwd()` reports the latter, then Git won't understand that you
wanted to see the history as per the `GIT/` subdirectory but it thinks you
wanted to see the history of some directory that may have existed in the
past (but actually never did).
So let's be extra careful to adjust the capitalization of the current
directory before working with it.
Reported by a few PowerShell power users ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We no longer use any of MSVCRT's stat-functions, so there's no need to
stick to a CRT-compatible 'struct stat' either.
Define and use our own POSIX-2013-compatible 'struct stat' with nanosecond-
precision file times.
Note: Due to performance issues when using git variants with different file
time resolutions, this patch does *not* yet enable nanosecond precision in
the Makefile (use 'make USE_NSEC=1').
Signed-off-by: Karsten Blees <blees@dcon.de>
The contract for the stat() and lstat() function is:
> stat(): stats the file pointed to by path and fills in buf.
> lstat(): is identical to stat(), except that if path is a symbolic link,
> then the link itself is stat-ed, not the file that it refers to.
stat() should always return the statistics of the file or directory a
symbolic link is pointing to. The lstat() function is used to get the
stats for the symlink. Hence the check should not be there.
Signed-off-by: Loris Chiocca <loris@chiocca.ch>
fstat() is the only stat-related CRT function for which we don't have a
full replacement yet (and thus the only reason to stick with MSVCRT's
'struct stat' definition).
Fully implement fstat(), in preparation of implementing a POSIX 2013
compatible 'struct stat' with nanosecond-precision file times.
Signed-off-by: Karsten Blees <blees@dcon.de>
