Git's test suite shows tons of breakages unless Git is compiled
*without* NO_ICONV. That means, in turn, that we need to generate
build definitions *with* libiconv, which in turn implies that we
have to handle the -liconv option properly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Generators/ directory can contain spurious files such as editors'
backup files. Even worse, there could be .swp files which are not even
valid Perl scripts.
Let's just ignore anything but .pm files in said directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Upon seeing the '-lcurl' option, point to the libcurl.lib.
While there, fix the elsif indentation.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Rather than swallowing the errors, it is better to have them in a file.
To make it obvious what this is about, use the file name
'msvc-build-makedryerrors.txt'.
Further, if the output is empty, simply delete that file. As we target
Git for Windows' SDK (which, unlike its predecessor msysGit, offers
Perl versions newer than 5.8), we can use the quite readable syntax
`if -f -z $ErrsFile` (available in Perl >=5.10).
Note that the file will contain the new values of the GIT_VERSION
and GITGUI_VERSION if they were generated by the make file. They
are omitted if the release is tagged and indentically defined in
their respective GIT_VERSION_GEN file DEF_VER variables.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git's build contains steps to handle internationalization. This caused
hiccups in the parser used to generate QMake/Visual Studio project files.
As those steps are irrelevant in this context, let's just ignore them.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The engine.pl script expects file names not to contain spaces. However,
paths with spaces are quite prevalent on Windows. Use shellwords() rather
than split() to parse them correctly.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The error message talked about a "lib option", but it clearly referred
to a link option.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add the Microsoft .manifest pattern, and correct the generic 'Debug'
and 'Release' directory patterns which were mechanically adjusted way
back in c591d5f (gitignore: root most patterns at the top-level directory,
2009-10-26) to allow multi-level projects within the Git suite.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
In the years-old effort to clean up the PATH a bit, we deprecated dashed
invocations.
But we did not hold ourselves to that. Until now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The original idea of deprecating invocations of Git subcommands via
their dashed form was to be able to ship without having to hard-link
each and every builtin to its dashed form.
We need to follow this plan ourselves, by patching our very own scripts
accordingly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A long time ago, in turn a long time after introducing builtins and
moving Git's scripts to libexec/git-core/, we deprecated the invocation
of dashed commands.
The merge-octopus script is a holdover from the time before that, as it
still tries to invoke a builtin by its dashed form. Let's just not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The invocation of dashed Git commands was rightfully deprecated a long
time ago. We failed to heed that deprecation ourselves, but it is never
too late...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We deprecated the dashed invocations ages ago. Might just as well hold
ourselves to that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We started deprecating the dashed form a long time ago, advertising the
fact that dashed invocations of Git commands are deprecated for several
major versions.
Yet we still used them ourselves.
With ashes on our heads, we now start to finally get rid of those calls.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a real old anachronism from the Cogito days to have a
.git/branches/ directory. And to have tests that ensure that Cogito
users can migrate away from using that directory.
But so be it, let's continue testing it.
Let's make sure, however, that git init does not need to create that
directory.
This bug was noticed when testing with templates that had been
pre-committed, skipping the empty branches/ directory of course because
Git does not track empty directories.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is one of the few places where Git violates its own deprecation of
the dashed form. It is not necessary, either.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git's source code wants to be able to close() the same file descriptor
multiple times, ignoring the error returned by the second call (and the
ones after that), or to access the osfhandle of an already-closed stdout,
among other things that the UCRT does not like.
Simply linking invalidcontinue.obj allows such usage without resorting to
Debug Assertions (or exiting with exit code 9 in Release Mode).
Let's add a note so we don't forget, as suggested by Jeff Hostetler.
See https://msdn.microsoft.com/en-us/library/ms235330.aspx for more
details.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The test suite does actually not pass when files are checked out with
CR/LF line endings, so we have to force them to LF-only.
For good measure, we simply force all source files to LF, also to make
it easier for Git for Windows contributors to contribute to upstream
Git's source code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When compiling with Visual Studio, the projects' names are identical to
the executables modulo the extensions. Which means that the bin-wrappers
*need* to target the .exe files lest they try to execute directories.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We do have a lovely Makefile option to state that that header file is
not available. Let's use it everywhere...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MS Visual C suggests that the construct
condition ? (int) i : (ptrdiff_t) d
is incorrect. Let's fix this by casting to ptrdiff_t also for the
positive arm of the conditional.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The short and sweet PREFIX can be confused when used in many places.
Rename both usages to better describe their purpose. EXEC_CMD_PREFIX is
used in full to disambiguate it from the nearby GIT_EXEC_PATH.
The PREFIX in sideband.c, while nominally independant of the exec_cmd
PREFIX, does reside within libgit[1], so the definitions would clash
when taken together with a PREFIX given on the command line for use by
exec_cmd.c.
Noticed when compiling Git for Windows using MSVC/Visual Studio [1] which
reports the conflict beteeen the command line definition and the
definition in sideband.c within the libgit project.
[1] the libgit functions are brought into a single sub-project
within the Visual Studio construction script provided in contrib,
and hence uses a single command for both exec_cmd.c and sideband.c.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
'make clean', or a 'git clean -dfx' will delete the PM stamp file,
so it cannot be a direct target in such clean conditions, resulting
in an error.
Normally the PM.stamp is recreated by the git/Makefile, except when
a dry-run is requested, for example, as used in the msysgit msvc-build
script which implements the compat/vcbuild/README using
contrib/buildsystems. The script msvc-build is introduced later in this
series.
Protect the PM.stamp target when the PM.stamp file does not exist,
allowing a Git 'Makefile -n' to succeed on a clean repo.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
---
This is development of the original "[PATCH 4/17] Makefile: a dry-run
can error out if no perl. Document the issue" 2015-06-25,
(http://marc.info/?l=git&m=143519054716960&w=2), which simply documented
the issue and then used NO_PERL to avoid the problem. See follow on
email thread for some discussion.
Ever since 457f08a (git-rev-list: add --bisect-vars option.,
2007-03-21), Git's source code uses the following trick to fool GCC into
*not* warning about uninitialized values:
int value = value;
We use this trick to silence the "warning: ‘x’ is used uninitialized in
this function [-Wuninitialized]" when the variables are not really used
uninitialized (but it is hard for the compiler to determine that).
This trick works well for GCC, and even Clang seems to appease that
workaround.
Not so Visual C. It does realize that this is just a trick to fool it,
and it simply refuses to be fooled.
The only way to silence the warning for Visual C would be to write
something like this:
#pragma warning(suppress: 4700)
int value;
Obviously this is not portable, and neither is that trick that fools
GCC. So let's just introduce a new macro that continues to fool GCC, but
simply initializes the values everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach "add" to use preload-index and fscache features
to improve performance on very large repositories.
During an "add", a call is made to run_diff_files()
which calls check_remove() for each index-entry. This
calls lstat(). On Windows, the fscache code intercepts
the lstat() calls and builds a private cache using the
FindFirst/FindNext routines, which are much faster.
Somewhat independent of this, is the preload-index code
which distributes some of the start-up costs across
multiple threads.
We need to keep the call to read_cache() before parsing the
pathspecs (and hence cannot use the pathspecs to limit any preload)
because parse_pathspec() is using the index to determine whether a
pathspec is, in fact, in a submodule. If we would not read the index
first, parse_pathspec() would not error out on a path that is inside
a submodule, and t7400-submodule-basic.sh would fail with
not ok 47 - do not add files from a submodule
We still want the nice preload performance boost, though, so we simply
call read_cache_preload(&pathspecs) after parsing the pathspecs.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The purpose of this function is to stat() the files listed in the index
in a multi-threaded fashion. It is called directly after reading the
index in the read_index_preloaded() function.
However, in some cases we may want to separate the index reading from
the preloading step, e.g. in builtin/add.c, where we need to load the
index before we parse the pathspecs (which needs to error out if one of
the pathspecs refers to a path within a submodule, for which the index
must have been read already), and only then will we want to preload,
possibly limited by the just-parsed pathspecs.
So let's just export that function to allow calling it separately.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach preload-index to avoid lstat() calls for index-entries
with skip-worktree bit set. This is a performance optimization.
During a sparse-checkout, the skip-worktree bit is set on items
that were not populated and therefore are not present in the
worktree. The per-thread preload-index loop performs a series
of tests on each index-entry as it attempts to compare the
worktree version with the index and mark them up-to-date.
This patch short-cuts that work.
On a Windows 10 system with a very large repo (450MB index)
and various levels of sparseness, performance was improved
in the {preloadindex=true, fscache=false} case by 80% and
in the {preloadindex=true, fscache=true} case by 20% for various
commands.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
When using cvsnt + msys + git, it seems like the output of cvs status
had \r\n in it, and caused the command to fail.
This fixes that.
Signed-off-by: Dustin Spicuzza <dustin@virtualroadside.com>
Just like with other Git commands, this option makes it read the paths
from the standard input. It comes in handy when resetting many, many
paths at once and wildcards are not an option (e.g. when the paths are
generated by a tool).
Note: we first parse the entire list and perform the actual reset action
only in a second phase. Not only does this make things simpler, it also
helps performance, as do_diff_cache() traverses the index and the
(sorted) pathspecs in simultaneously to avoid unnecessary lookups.
This feature is marked experimental because it is still under review in
the upstream Git project.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, strftime() does not silently ignore invalid formats, but
warns about them and then returns 0 and sets errno to EINVAL.
Unfortunately, Git does not expect such a behavior, as it disagrees
with strftime()'s semantics on Linux. As a consequence, Git
misinterprets the return value 0 as "I need more space" and grows the
buffer. As the larger buffer does not fix the format, the buffer grows
and grows and grows until we are out of memory and abort.
Ideally, we would switch off the parameter validation just for
strftime(), but we cannot even override the invalid parameter handler
via _set_thread_local_invalid_parameter_handler() using MINGW because
that function is not declared. Even _set_invalid_parameter_handler(),
which *is* declared, does not help, as it simply does... nothing.
So let's just bite the bullet and override strftime() for MINGW and
abort on an invalid format string. While this does not provide the
best user experience, it is the best we can do.
See https://msdn.microsoft.com/en-us/library/fe06s4ak.aspx for more
details.
This fixes https://github.com/git-for-windows/git/issues/863
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In particular when local tags are used (or tags that are pushed to some
fork) to build Git, it is very hard to figure out from which particular
revision a particular Git executable was built.
Let's just report that in our build options.
We need to be careful, though, to report when the current commit cannot be
determined, e.g. when building from a tarball without any associated Git
repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add preliminary support for detection of the build plaform, and reporting
of same with the `git version --build-options' command. This can be useful
for bug reporting, to distinguish between 32 and 64-bit builds for
example.
The current implementation can only distinguish between x86 and x86_64.
This will be extended in future patches. In addition, all 32-bit variants
(i686, i586, etc.) are collapsed into `x86'. An example of the output is:
$ git version --build-options
git version 2.9.3.windows.2.826.g06c0f2f
sizeof-long: 4
machine: x86_64
The label of `machine' was chosen so the new information will approximate
the output of `uname -m'.
Signed-off-by: Adric Norris <landstander668@gmail.com>
This is a brown paper bag. When adding the tests, we actually failed
to verify that the config variable is heeded in git-init at all. And
when changing the original patch that marked the .git/ directory as
hidden after reading the config, it was lost on this developer that
the new code would use the hide_dotfiles variable before the config
was read.
The fix is obvious: read the (limited, pre-init) config *before*
creating the .git/ directory.
This fixes https://github.com/git-for-windows/git/issues/789
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch introduces a highly-experimental feature allowing to
override stdin/stdout/stderr by setting environment variables e.g. to
named pipes, solving a problem in highly multi-threaded applications
where inheritable handles could cause blocked Git operations.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When a third-party tool periodically runs `git status` in order to keep
track of the state of the working tree, it is a bad idea to lock the
index: it might interfere with interactive commands executed by the
user, e.g. when the user wants to commit files.
Let's introduce the option `--no-lock-index` to prevent such problems.
The idea is that the third-party tool calls `git status` with this
option, preventing it from ever updating the index.
The downside is that the periodic `git status` calls will be a little
bit more wasteful because they may have to refresh the index repeatedly,
only to throw away the updates when it exits. This cannot really be
helped, though, as tools wanting to get a periodic update of the status
have no way to predict when the user may want to lock the index herself.
Note that the regression test added in this commit does not *really*
verify that no index.lock file was written; that test is not possible in
a portable way. Instead, we verify that .git/index is rewritten *only*
when `git status` is run without `--no-lock-index`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
issue #790: git bundle create does not close handle to *.lock file
This problem happens when an user tries to create an empty bundle, using the
following command: `git bundle create <bundle> <revlist>` and when <revlist>
resolve to an empty list (for example, like `master..master`), `git bundle` fails
and warn the user about how it don't want to create empty bundle.
In that case, git tries to delete the `<bundle>.lock` file, and since there's still
an open file handle, fails to do so and ask the user if it should retry (which will
fail again).
The lock can still be deleted manually by the user (and it is required if the user
want to create a bundle after revising his rev-list).
Signed-off-by: Gaël Lhez <gael.lhez@gmail.com>
On Windows, files cannot be removed nor renamed if there are still
handles held by a process. To remedy that, we introduced the
close_all_packs() function.
Earlier, we made sure that the packs are released just before `git gc`
is spawned, in case that gc wants to remove no-longer needed packs.
But this developer forgot that gc itself also needs to let go of packs,
e.g. when consolidating all packs via the --aggressive option.
Likewise, `git repack -d` wants to delete obsolete packs and therefore
needs to close all pack handles, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The CreateProcessW() function does not really support spaces in its
first argument, lpApplicationName. But it supports passing NULL as
lpApplicationName, which makes it figure out the application from the
(possibly quoted) first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
This fixes https://github.com/git-for-windows/git/issue/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
