git-rebase calls out to merge strategies, but did not support merge
strategy options so far. Add this, in the same style used in
git-merge.
Sadly we have to do the full quoting/eval dance here, since
merge-recursive supports the --subtree=<path> option which potentially
contains whitespace.
This patch does not cover git rebase -i, which does not call any merge
strategy directly except in --preserve-merges, and even then only for
merges.
[jc: with a trivial fix-up for 'expr']
Signed-off-by: Mike Lundy <mike@fluffypenguin.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When printing an error message saying a ref was requested that we do not
have, only print that ref, rather than the ref and everything sent to us
on the same packet line (e.g. protocol support specifications).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
test-lib: Remove 3 year old no-op --no-python option
test-lib: Ignore --quiet under a TAP harness
Documentation/rev-parse: quoting is required with --parseopt
Documentation: reporting bugs
Fix git rebase --continue to work with touched files
Document ls-files -t as semi-obsolete.
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the rest of the script to more closely follow the test
style guide. Guarding setup commands with test_expect_success
makes it easy to see the scope in which some particular data is
used; removal of whitespace after >redirection operators is just
for consistency.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a non-interactive rebase, sometimes
"git rebase --continue" will fail if an unmodified file is
touched in the working directory:
You must edit all merge conflicts and then
mark them as resolved using git add
This is caused by "git diff-files" reporting a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-files" as is done in git-rebase--interactive.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given a file with:
(define archive-id "$Format:%ct|%h|a$")
and an export-subst attribute, the "%h" results in an full 40-digit
object name instead of the expected 7-digit one.
The export-subst feature requests unabbreviated object names because
that is the low-level default. The effect was not observable until
v1.7.1.1~17^2~3 (2010-05-03), which taught log --format=%h to respect
the --abbrev option.
Reported-by: Eli Barzilay <eli@barzilay.org>
Tested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various merge-recursive cases were fixed in "merge-recursive: Fix D/F
conflicts" by Elijah Newren. Some tests were changed from
test_expect_failure to test_expect_success, but one fell through the
cracks.
Change that test to use test_expect_success.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $HOME is unset (as in some automated build situations),
currently
git config --path path.home "~"
git config --path --get path.home
segfaults. Error out with
Failed to expand user dir in: '~/'
instead.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We document how to run prove with the --state option in t/README. This
produces a .prove YAML file in the current directory. Change the t/
gitignore to ignore it, and clean it up on `make clean'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test case checked the stdout and stderr of 'git add' by constructing a
single 'expect' file that contained both streams. But when the command
runs, the order of stdout and stderr output is unpredictable because it
depends on how the streams are buffered. At least on Windows, the buffering
is different from what the test case expected. Hence, check the two output
texts separately.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure git apply can apply patches with paths relative to the
toplevel of a work tree, a subdirectory, or within the repository
metadata directory.
Relative paths are broken for most commands when run from a
subdirectory of $GIT_DIR, "git apply" being no exception. The other
tests are meant to keep the demonstration of that company.
Based on a test by Duy.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the style of these tests to make them easier to read.
- Replace test_rev_parse() which produced multiple mini-tests with a
simple function that can be used with the test body.
- Combine multiple mini-tests into larger chunks that are easier
to read.
- Do not hard-code object IDs. We may use a different hash some day.
- Use test_cmp in preference to the test builtin. The former
produces useful output when tests are run with the "-v" option.
- Guard all test code with test_expect_success. This makes it much
easier to visually scan through the test and find code of interest.
- Use subshells to make the current directory easier to track.
Outside of any subshell, the current directory is always
$TEST_DIRECTORY now.
Also add a new test demonstrating a possible bug noticed in the
process of cleaning up: “git rev-parse --show-prefix” leaves out
the trailing newline after an empty prefix when cwd is at the
toplevel of the work tree.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 9d2e942 (decode file:// and ssh:// URLs, 2010-05-23) the URL
logic unquotes escaped URLs. For the %2B type of escape, this is
conformant with RFC 2396. However, it also unquotes + into a space
character, which is only appropriate for the query strings in HTTP.
This notably broke fetching from the gtk+ repository.
We cannot just remove the corresponding code since the same
url_decode_internal() is also used by the HTTP backend to decode query
parameters. Introduce a new argument that controls whether the +
decoding happens, and use it only in the (client-side) url_decode().
Reported-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
* maint-1.6.5:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
A test case is added but the problem can only be seen when running
the test case with --valgrind.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a test like:
test "$(git rev-parse --verify HEAD)" != "$(git rev-parse --verify fourth)"
the --verify does not accomplish much, since the exit status of
git rev-parse is not propagated to test. So it is more robust to
define and use the helper functions check_head_differs_from() and
check_head_equals() as done by this patch.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently do not disable diff.renames configuration while rebase
internally runs "format-patch" to feed "am -3".
The end user configuration for "diff" should not affect the result
produced by the higher level command that is related to "diff" only
because internally it is implemented in terms of it.
For that matter, I have a feeling that format-patch should not even look
at diff.renames, but we seem to have been doing this for a long time so
there is no easy way to fix this thinko.
In any case, here is a much straightforward fix for "rebase".
[jn: with test case from David]
Reported-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test used 5-space indents since it was added in 2005, but
recently the temptation to use tabs to indent has been too
strong, resulting in uneven whitespace. Switch over completely
to tabs.
While at it, use a more modern style for consistency with other
tests:
- names of tests go on the same line as test_expect_success;
- extra whitespace after > redirection operators is removed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With v1.5.3.2~14 (apply --index-info: fall back to current index for
mode changes, 2007-09-17), git apply learned to stop worrying
about the lack of diff index line when a file already present in the
current index had no content change.
But it still worries too much: for rename patches, it is checking
that both the old and new filename are present in the current
index. This makes no sense, since a file rename generally
involves creating a file there was none before.
So just check the old filename.
Noticed while trying to use “git rebase” with diff.renames = copies.
[jn: add tests]
Reported-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most tests in t4150 begin by navigating to a sane state and
applying some patch:
git checkout first &&
git am patch1
If a previous test left behind unmerged files or a .git/rebase-apply
directory, they are untouched and the test fails, causing later tests
to fail, too. This is not a problem in practice because none of the
tests leave a mess behind.
But as a futureproofing measure, it is still best to avoid the problem
and clean up at the start of each test. In particular, this
simplifies the process of adding new tests that are known to fail.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Place setup commands in test_expect_success blocks. This makes the
rare event of the setup commands breaking on some platform easier to
diagnose, and more importantly, it visually distinguishes where
each test begins and ends.
Instead of running test -z against the result of "git diff" command
substitution, use "git diff --exit-code", to improve output when
running with the "-v" option.
Use test_cmp in place of "test $(foo) = $(bar)" for similar reasons.
Remove whitespace after the > and < redirection operators for
consistency with other tests.
The order of arguments to test_cmp is "test_cmp expected actual".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two tests weren't about how "git reflog show <branch>" exits when
there is no reflog, but were about "checkout" and "branch" create or not
create reflog when creating a new <branch>. Update the tests to check
what we are interested in, using "git rev-parse --verify".
Also lose tests based on "test -f .git/logs/refs/heads/<branch>" from
nearby, to avoid exposing this particular implementation detail
unnecessarily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct advice should have been taken from c289c31 (t/t7006: ignore
return status of shell's unset builtin, 2010-06-02). A real-life issue
we experienced was with "unset", not with "export" (exporting an
unset variable may have similar portability issues, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_must_fail will account for segfaults in git, so it should be used
instead of "! git"
This patch does not change any of the commands that use pipes.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two lines use the negation '!' operator to negate the result of a
simple command. Since these commands do not contain any pipes or other
complexities, the test_must_fail function can be used and is preferred
since it will additionally detect termination due to a signal.
This was noticed because the second use of '!' does not include a space
between the '!' and the opening parens. Ksh interprets this as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some have found the wording of the description to be somewhat ambiguous
with respect to when it is desirable to use test_must_fail instead of
"! <git-command>". Tweak the wording somewhat to hopefully clarify that
it is _because_ test_must_fail can detect segmentation fault that it is
desirable to use it instead of "! <git-command>".
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option adds symmetry with fast-import, enabling it to also work with
complete trees instead of just incremental changes. It works by issuing a
'deleteall' directive with each commit and then listing the full set of
files that make up that commit, rather than just showing the list of files
that have changed since the (first) parent commit. Note that this
functionality is automatically turned on when using --import-marks together
with path limiting in order to avoid dropping important but unchanged
files.
This functionality is desired when using hand-written filters along with
'fast-export | some-filter | fast-import' as it can be easier to write
<some-filter> in terms of complete trees than incremental changes.
We could avoid the need to add this option by simply always turning it on.
While the end result would be identical, it would slow things down slightly
by printing many more filenames per commit which goes somewhat against the
'fast' in 'fast-export'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since fast-export operates by listing file changes since the (first) parent
commit, when using --import-marks and path limiting and using a wider list
of paths than in previous runs, files from the new path(s) will silently be
omitted from the result unless or until a commit which explicitly changes
those files. The resulting repository in such cases is broken and makes no
sense.
This commit fixes this by having fast-export work with complete trees
instead of incremental changes (when both --import-marks and path limiting
are used). It works by issuing a 'deleteall' directive with each commit and
then listing the full set of files that make up that commit, rather than
just showing the list of files that have changed since the (first) parent
commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of saying "Finished one cherry-pick." or "Finished one revert.",
we now say "Finished cherry-pick of commit <abbreviated sha1>." or
"Finished revert of commit <abbreviated sha1>." which is more informative,
especially when cherry-picking or reverting many commits.
In case of failure the message is now "Automatic cherry-pick of commit
<abbreviated sha1> failed." instead of "Automatic cherry-pick failed."
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick foo" has always reported success with
"Finished one cherry-pick" but "cherry-pick --strategy"
does not print anything. So move the code to write that
message from do_recursive_merge() to do_cherry_pick()
so other strategies can share it.
This patch also refactors the code that prints a message
like "Automatic cherry-pick failed. <help message>". This
code was duplicated in both do_recursive_merge() and
do_pick_commit().
To do that, now do_recursive_merge() returns an int to signal
success or failure. And in case of failure we just return 1
from do_pick_commit() instead of doing "exit(1)" from either
do_recursive_merge() or do_pick_commit().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
