Just like "make -C <directory>", make "git -C <directory> ..." to
go there before doing anything else.
* nr/git-cd-to-a-directory:
t0056: "git -C" test updates
git: run in a directory given with -C option
Fix a minor regression in v1.8.3.2 and later that made it
impossible to base your local work on anything but a local branch
of the upstream repository you are tracking from.
* jh/checkout-auto-tracking:
t3200: fix failure on case-insensitive filesystems
branch.c: Relax unnecessary requirement on upstream's remote ref name
t3200: Add test demonstrating minor regression in 41c21f2
Refer to branch.<name>.remote/merge when documenting --track
t3200: Minor fix when preparing for tracking failure
t2024: Fix &&-chaining and a couple of typos
Just like "git checkout -" knows to check out and "git merge -"
knows to merge the branch you were previously on, "git cherry-pick"
now understands "git cherry-pick -" to pick from the previous
branch.
* hu/cherry-pick-previous-branch:
cherry-pick: allow "-" as abbreviation of '@{-1}'
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
Make "foo^{tag}" to peel a tag to itself, i.e. no-op., and fail if
"foo" is not a tag. "git rev-parse --verify v1.0^{tag}" would be a
more convenient way to say "test $(git cat-file -t v1.0) = tag".
* rh/peeling-tag-to-tag:
peel_onion: do not assume length of x_type globals
peel_onion(): add support for <rev>^{tag}
"git branch -v -v" (and "git status") did not distinguish among a
branch that does not build on any other branch, a branch that is in
sync with the branch it builds on, and a branch that is configured
to build on some other branch that no longer exists.
* jx/branch-vv-always-compare-with-upstream:
status: always show tracking branch even no change
branch: report invalid tracking branch as gone
When there is no sufficient overlap between old and new history
during a fetch into a shallow repository, we unnecessarily sent
objects the sending side knows the receiving end has.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
Commit 05c1eb1 (push: teach --force-with-lease to smart-http
transport) fixed the compare-and-swap test in t5541. It
tried to mark the test as passing by teaching the test
helper function to expect an extra "success or failure"
parameter, but forgot to actually use the parameter in the
helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a908047 taught format-patch the "--from" option,
which places the author ident into an in-body from header,
and uses the committer ident in the rfc822 from header. The
documentation claims that it will omit the in-body header
when it is the same as the rfc822 header, but the code never
implemented that behavior.
This patch completes the feature by comparing the two idents
and doing nothing when they are the same (this is the same
as simply omitting the in-body header, as the two are by
definition indistinguishable in this case). This makes it
reasonable to turn on "--from" all the time (if it matches
your particular workflow), rather than only using it when
exporting other people's patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of repeating the text to record as the commit log message
and string we expect to see in "log" output, use the same variable
to avoid them going out of sync.
Use different names for test files in different directories to
improve our chance to catch future breakages that makes "-C <dir>"
go to a place that is different from what was specified.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of git's traversals are robust against minor breakages
in commit data. For example, "git log" will still output an
entry for a commit that has a broken encoding or missing
author, and will not abort the whole operation.
Shortlog, on the other hand, will die as soon as it sees a
commit without an author, meaning that a repository with
a broken commit cannot get any shortlog output at all.
Let's downgrade this fatal error to a warning, and continue
the operation.
We simply ignore the commit and do not count it in the total
(since we do not have any author under which to file it).
Alternatively, we could output some kind of "<empty>" record
to collect these bogus commits. It is probably not worth it,
though; we have already warned to stderr, so the user is
aware that such bogosities exist, and any placeholder we
came up with would either be syntactically invalid, or would
potentially conflict with real data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A clone will always create a transport struct, whether we
are cloning locally or using an actual protocol. In the
local case, we only use the transport to get the list of
refs, and then transfer the objects out-of-band.
However, there are many options that we do not bother
setting up in the local case. For the most part, these are
noops, because they only affect the object-fetching stage
(e.g., the --depth option). However, some options do have a
visible impact. For example, giving the path to upload-pack
via "-u" does not currently work for a local clone, even
though we need upload-pack to get the ref list.
We can just drop the conditional entirely and set these
options for both local and non-local clones. Rather than
keep track of which options impact the object versus the ref
fetching stage, we can simply let the noops be noops (and
the cost of setting the options in the first place is not
high).
The one exception is that we also check that the transport
provides both a "get_refs_list" and a "fetch" method. We
will now be checking the former for both cases (which is
good, since a transport that cannot fetch refs would not
work for a local clone), and we tweak the conditional to
check for a "fetch" only when we are non-local.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stderr does not point to a tty, we typically suppress
"we are now in this phase" progress reporting (e.g., we ask
the server not to send us "counting objects" and the like).
The new "checking connectivity" message is in the same vein,
and should be suppressed. Since clone relies on the
transport code to make the decision, we can simply sneak a
peek at the "progress" field of the transport struct. That
properly takes into account both the verbosity and progress
options we were given, as well as the result of isatty().
Note that we do not set up that progress flag for a local
clone, as we do not fetch using the transport at all. That's
acceptable here, though, because we also do not perform a
connectivity check in that case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Putting messages like "Cloning into.." and "done" on stdout
is un-Unix and uselessly clutters the stdout channel. Send
them to stderr.
We have to tweak two tests to accommodate this:
1. t5601 checks for doubled output due to forking, and
doesn't actually care where the output goes; adjust it
to check stderr.
2. t5702 is trying to test whether progress output was
sent to stderr, but naively does so by checking
whether stderr produced any output. Instead, have it
look for "%", a token found in progress output but not
elsewhere (and which lets us avoid hard-coding the
progress text in the test).
This should not regress any scripts that try to parse the
current output, as the output is already internationalized
and therefore unstable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people still use rather old versions of bash, which cannot grok
some constructs like 'printf -v varname' the prompt and completion
code started to use recently.
* bc/completion-for-bash-3.0:
contrib/git-prompt.sh: handle missing 'printf -v' more gracefully
t9902-completion.sh: old Bash still does not support array+=('') notation
git-completion.bash: use correct Bash/Zsh array length syntax
Fixes a minor bug in "git rebase -i" (there could be others, as the
root cause is pretty generic) where the code feeds a random, data
dependeant string to 'echo' and expects it to come out literally.
* mm/no-shell-escape-in-die-message:
die_with_status: use "printf '%s\n'", not "echo"
Output from "git log --full-diff -- <pathspec>" looked strange,
because comparison was done with the previous ancestor that touched
the specified <pathspec>, causing the patches for paths outside the
pathspec to show more than the single commit has changed.
* tr/log-full-diff-keep-true-parents:
log: use true parents for diff when walking reflogs
log: use true parents for diff even when rewriting
The auto-tag-following code in "git fetch" tries to reuse the same
transport twice when the serving end does not cooperate and does
not give tags that point to commits that are asked for as part of
the primary transfer. Unfortunately, Git-aware transport helper
interface is not designed to be used more than once, hence this
does not work over smart-http transfer.
* jc/transport-do-not-use-connect-twice-in-fetch:
builtin/fetch.c: Fix a sparse warning
fetch: work around "transport-take-over" hack
fetch: refactor code that fetches leftover tags
fetch: refactor code that prepares a transport
fetch: rename file-scope global "transport" to "gtransport"
t5802: add test for connect helper
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
A packfile that stores the same object more than once is broken and
will be rejected by "git index-pack" that is run when receiving data
over the wire.
* jk/duplicate-objects-in-packs:
t5308: check that index-pack --strict detects duplicate objects
test index-pack on packs with recoverable delta cycles
add tests for indexing packs with delta cycles
sha1-lookup: handle duplicate keys with GIT_USE_LOOKUP
test-sha1: add a binary output mode
We made sure that we notice the user-supplied GIT_DIR is actually a
gitfile, but did not do the same when the default ".git" is a gitfile.
* nd/git-dir-pointing-at-gitfile:
Make setup_git_env() resolve .git file when $GIT_DIR is not specified
Modernize tests.
* fc/rev-parse-test-updates:
rev-parse test: use standard test functions for setup
rev-parse test: use test_cmp instead of "test" builtin
rev-parse test: use test_must_fail, not "if <command>; then false; fi"
rev-parse test: modernize quoting and whitespace
By doing this, clients of upload-pack can now reliably tell what ref
a symbolic ref points at; the updated test in t5505 used to expect
failure due to the ambiguity and made sure we give diagnostics, but
we no longer need to be so pessimistic. Make sure we correctly learn
which branch HEAD points at from the other side instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When two or more branches point at the same commit and HEAD is
pointing at one of them, without the symref extension, there is no
way to remotely tell which one of these branches HEAD points at.
The test in question attempts to make sure that this situation is
diagnosed and results in a failure.
However, even if there _were_ a way to reliably tell which branch
the HEAD points at, "set-head --auto" would fail if there is no
remote tracking branch. Make sure that this test does not fail
for that "wrong" reason.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove now disused remote-helpers framework for helpers written in
Python.
* jk/remove-remote-helpers-in-python:
git_remote_helpers: remove little used Python library
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
Earlier we started rejecting an attempt to add 0{40} object name to
the index and to tree objects, but it sometimes is necessary to
allow so to be able to use tools like filter-branch to correct such
broken tree objects.
* jk/write-broken-index-with-nul-sha1:
write_index: optionally allow broken null sha1s
On MacOS X, we detected if the filesystem needs the "pre-composed
unicode strings" workaround, but did not automatically enable it.
Now we do.
* tb/precompose-autodetect-fix:
Set core.precomposeunicode to true on e.g. HFS+
Some tests were not skipped under NO_PERL build.
* kk/tests-with-no-perl:
reset test: modernize style
t/t7106-reset-unborn-branch.sh: Add PERL prerequisite
add -i test: use skip_all instead of repeated PERL prerequisite
Make test "using invalid commit with -C" more strict
"git commit --author=$name", when $name is not in the canonical
"A. U. Thor <au.thor@example.xz>" format, looks for a matching name
from existing history, but did not consult mailmap to grab the
preferred author name.
* ap/commit-author-mailmap:
commit: search author pattern against mailmap
62d94a3a (t3200: Add test demonstrating minor regression in 41c21f2;
2013-09-08) introduced a test which creates a directory named 'a',
however, on case-insensitive filesystems, this action fails with a
"fatal: cannot mkdir a: File exists" error due to a file named 'A' left
over from earlier tests. Resolve this problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
322bb6e (2011 Aug 11) introduced a new subshell at the end of a test
case but omitted a '&&' to join the two; fix this.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using tab-completion, a directory path will often end with a
trailing slash which currently confuses "git reset" when dealing with
submodules. Now that we have parse_pathspec we can easily handle this
by simply adding the PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP flag.
To do this, we need to move the read_cache() call before the
parse_pathspec() call. All of the existing paths through cmd_reset()
that do not die early already call read_cache() at some point, so there
is no performance impact to doing this in the common case.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ignore currently shows how .gitignore rules would treat untracked
paths. Tracked paths do not generate useful output. This prevents
debugging of why a path became tracked unexpectedly unless that path is
first removed from the index with `git rm --cached <path>`.
The option --no-index tells the command to bypass the check for the
path being in the index and hence allows tracked paths to be checked
too.
Whilst this behaviour deviates from the characteristics of `git add` and
`git status` its use case is unlikely to cause any user confusion.
Test scripts are augmented to check this option against the standard
ignores to ensure correct behaviour.
Signed-off-by: Dave Williams <dave@opensourcesolutions.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/mediawiki-dumb-push-fix:
git-remote-mediawiki: no need to update private ref in non-dumb push
git-remote-mediawiki: use no-private-update capability on dumb push
transport-helper: add no-private-update capability
git-remote-mediawiki: add test and check Makefile targets
"git config" did not provide a way to set or access numbers larger
than a native "int" on the platform; it now provides 64-bit signed
integers on all platforms.
* jk/config-int-range-check:
git-config: always treat --int as 64-bit internally
config: make numeric parsing errors more clear
config: set errno in numeric git_parse_* functions
config: properly range-check integer values
config: factor out integer parsing from range checks
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
The commit object names in the insn sheet that was prepared at the
beginning of "rebase -i" session can become ambiguous as the
rebasing progresses and the repository gains more commits. Make
sure the internal record is kept with full 40-hex object names.
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
"git rebase -p" internally used the merge machinery, but when
rebasing, there should not be a need for merge summary.
* rt/rebase-p-no-merge-summary:
rebase --preserve-merges: ignore "merge.log" config
"git pull --rebase" always flattened the history; pull.rebase can
now be set to "preserve" to invoke "rebase --preserve-merges".
* sh/pull-rebase-preserve:
pull: allow pull to preserve merges when rebasing
