We newly handle isatty() by special-casing the stdin/stdout/stderr file
descriptors, caching the return value. However, we missed the case where
dup2() overrides the respective file descriptor.
That poses a problem e.g. where the `show` builtin asks for a pager very
early, the `setup_pager()` function sets the pager depending on the
return value of `isatty()` and then redirects stdout. Subsequently,
`cmd_log_init_finish()` calls `setup_pager()` *again*. What should
happen now is that `isatty()` reports that stdout is *not* a TTY and
consequently stdout should be left alone.
Let's override dup2() to handle this appropriately.
This fixes https://github.com/git-for-windows/git/issues/1077
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches the project generator to generate a Visual
Studio solution, ready to be opened in Visual Studio 2010 or later.
The idea, of course, is to let some automatic build job generate and
commit the project files with
make MSVC=1 vcxproj
and then (force-)push to a special-purpose branch.
The major part of this branch thicket concerns itself not only with
generating the Visual Studio project files, but making sure that the
user can then run the test suite from a regular Git Bash (i.e. *not*
requiring a Git for Windows SDK), e.g. by running
cd t
prove --timer --jobs 15 ./t[0-9]*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This fixes the compilation, actually, as we still did not make the jump to
post-Windows XP completely: we still compile with _WIN32_WINNT set to
0x0502 (which corresponds to Windows Server 2003 and is technically
greater than Windows XP's 0x0501).
However, GetTickCount64() is only available starting with Windows
Vista/Windows Server 2008.
Let's just lazy-load the function, which should also help Git for Windows
contributors who want to reinstate Windows XP support.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For regular debugging, it is pretty helpful when a debug assertion in a
running application triggers a window that offers to start the debugger.
However, when running the test suite, it is not so helpful, in
particular when the debug assertions are then suppressed anyway because
we disable the invalid parameter checking (via invalidcontinue.obj, see
the comment in config.mak.uname about that object for more information).
So let's simply disable that window in Debug Mode (it is already
disabled in Release Mode).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
From Visual Studio 2015 Code Analysis: Warning C28159 Consider using
'GetTickCount64' instead of 'GetTickCount'.
Reason: GetTickCount overflows roughly every 49 days. Code that does not
take that into account can loop indefinitely. GetTickCount64 operates on
64 bit values and does not have that problem.
Signed-off-by: Steve Hoelzer <shoelzer@gmail.com>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
Note that the test cannot rely on the presence of short names, as they
are not enabled by default except on the system drive.
[jes: adjusted test number to avoid conflicts, reinstated && chain,
adjusted test to work without short names]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The CreateProcessW() function does not really support spaces in its
first argument, lpApplicationName. But it supports passing NULL as
lpApplicationName, which makes it figure out the application from the
(possibly quoted) first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
This fixes https://github.com/git-for-windows/git/issue/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In Git for Windows' SDK, there is already a script to package Git for
Windows as a NuGet package, downloading nuget.exe if needed.
Let's just fall back to using that executable (if it is there) if
nuget.exe was not found in the PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
`GetLongPathName()` function may fail when it is unable to query
the parent directory of a path component to determine the long name
for that component. It happens, because of it uses `FindFirstFile()`
function for each next short part of path. The `FindFirstFile()`
requires `List Directory` and `Synchronize` desired access for a calling
process.
In case of lacking such permission for some part of path,
the `GetLongPathName()` returns 0 as result and `GetLastError()`
returns ERROR_ACCESS_DENIED.
`GetFinalPathNameByHandle()` function can help in such cases, because
it requires `Read Attributes` and `Synchronize` desired access to the
target path only.
The `GetFinalPathNameByHandle()` function was introduced on
`Windows Server 2008/Windows Vista`. So we need to load it dynamically.
`CreateFile()` parameters:
`lpFileName` = path to the current directory
`dwDesiredAccess` = 0 (it means `Read Attributes` and `Synchronize`)
`dwShareMode` = FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE
(it prevents `Sharing Violation`)
`lpSecurityAttributes` = NULL (default security attributes)
`dwCreationDisposition` = OPEN_EXISTING
(required to obtain a directory handle)
`dwFlagsAndAttributes` = FILE_FLAG_BACKUP_SEMANTICS
(required to obtain a directory handle)
`hTemplateFile` = NULL (when opening an existing file or directory,
`CreateFile` ignores this parameter)
The string that is returned by `GetFinalPathNameByHandle()` function
uses the \\?\ syntax. To skip the prefix and convert backslashes
to slashes, the `normalize_ntpath()` mingw function will be used.
Note: `GetFinalPathNameByHandle()` function returns a final path.
It is the path that is returned when a path is fully resolved.
For example, for a symbolic link named "C:\tmp\mydir" that points to
"D:\yourdir", the final path would be "D:\yourdir".
Signed-off-by: Anton Serbulov <aserbulov@plesk.com>
We no longer use any of MSVCRT's stat-functions, so there's no need to
stick to a CRT-compatible 'struct stat' either.
Define and use our own POSIX-2013-compatible 'struct stat' with nanosecond-
precision file times.
Note: Due to performance issues when using git variants with different file
time resolutions, this patch does *not* yet enable nanosecond precision in
the Makefile (use 'make USE_NSEC=1').
Signed-off-by: Karsten Blees <blees@dcon.de>
The contract for the stat() and lstat() function is:
> stat(): stats the file pointed to by path and fills in buf.
> lstat(): is identical to stat(), except that if path is a symbolic link,
> then the link itself is stat-ed, not the file that it refers to.
stat() should always return the statistics of the file or directory a
symbolic link is pointing to. The lstat() function is used to get the
stats for the symlink. Hence the check should not be there.
Signed-off-by: Loris Chiocca <loris@chiocca.ch>
7ebac8cb94 made launching of .exe
externals work when installed in Unicode paths. But it broke launching
of non-.exe externals, no matter where they were installed. We now
correctly maintain the UTF-8 and UTF-16 paths in tandem in lookup_prog.
This fixes t5526, among others.
Signed-off-by: Adam Roben <adam@roben.org>
When we access IPv6-related functions, we load the corresponding system
library using the `LoadLibrary()` function, which is not the recommended
way to load system libraries.
In practice, it does not make a difference: the `ws2_32.dll` library
containing the IPv6 functions is already loaded into memory, so
LoadLibrary() simply reuses the already-loaded library.
Still, recommended way is recommended way, so let's use that instead.
While at it, also adjust the code in contrib/ that loads system libraries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When switching the current working directory, say, in PowerShell, it is
quite possible to use a different capitalization than the one that is
recorded on disk. While doing the same in `cmd.exe` adjusts the
capitalization magically, that does not happen in PowerShell so that
`getcwd()` returns the current directory in a different way than is
recorded on disk.
Typically this creates no problems except when you call
git log .
in a subdirectory called, say, "GIT/" but you switched to "Git/" and
your `getcwd()` reports the latter, then Git won't understand that you
wanted to see the history as per the `GIT/` subdirectory but it thinks you
wanted to see the history of some directory that may have existed in the
past (but actually never did).
So let's be extra careful to adjust the capitalization of the current
directory before working with it.
Reported by a few PowerShell power users ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
fstat() is the only stat-related CRT function for which we don't have a
full replacement yet (and thus the only reason to stick with MSVCRT's
'struct stat' definition).
Fully implement fstat(), in preparation of implementing a POSIX 2013
compatible 'struct stat' with nanosecond-precision file times.
Signed-off-by: Karsten Blees <blees@dcon.de>
This is needed so that `_wchdir()` can be used with drive root
directories, e.g. C:\ (`_wchdir("C:")` fails to switch the directory
to the root directory).
This fixes https://github.com/msysgit/git/issues/359 (in Git for Windows
2.x only, though).
Likewise, `readlink()`'s semantics require a trailing slash for symbolic
links pointing to directories. Otherwise all checked out symbolic links
pointing to directories would be marked as modified even directly after a
fresh clone.
This fixes https://github.com/git-for-windows/git/issues/210
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If Git were installed in a path containing non-ASCII characters,
commands such as git-am and git-submodule, which are implemented as
externals, would fail to launch with the following error:
> fatal: 'am' appears to be a git command, but we were not
> able to execute it. Maybe git-am is broken?
This was due to lookup_prog not being Unicode-aware. It was somehow
missed in 2ee5a1a14a.
Note that the only problem in this function was calling
GetFileAttributes instead of GetFileAttributesW. The calls to access()
were fine because access() is a macro which resolves to mingw_access,
which already handles Unicode correctly. But I changed lookup_prog to
use _waccess directly so that we only convert the path to UTF-16 once.
Signed-off-by: Adam Roben <adam@roben.org>
We do have a lovely Makefile option to state that that header file is
not available. Let's use it everywhere...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Symlinks on Windows have a flag that indicates whether the target is a file
or a directory. Symlinks of wrong type simply don't work. This even affects
core Win32 APIs (e.g. DeleteFile() refuses to delete directory symlinks).
However, CreateFile() with FILE_FLAG_BACKUP_SEMANTICS doesn't seem to care.
Check the target type by first creating a tentative file symlink, opening
it, and checking the type of the resulting handle. If it is a directory,
recreate the symlink with the directory flag set.
It is possible to create symlinks before the target exists (or in case of
symlinks to symlinks: before the target type is known). If this happens,
create a tentative file symlink and postpone the directory decision: keep
a list of phantom symlinks to be processed whenever a new directory is
created in mingw_mkdir().
Limitations: This algorithm may fail if a link target changes from file to
directory or vice versa, or if the target directory is created in another
process.
Signed-off-by: Karsten Blees <blees@dcon.de>
Accessing the Windows console through the special CONIN$ / CONOUT$ devices
doesn't work properly for non-ASCII usernames an passwords.
It also doesn't work for terminal emulators that hide the native console
window (such as mintty), and 'TERM=xterm*' is not necessarily a reliable
indicator for such terminals.
The new shell_prompt() function, on the other hand, works fine for both
MSys1 and MSys2, in native console windows as well as mintty, and properly
supports Unicode. It just needs bash on the path (for 'read -s', which is
bash-specific).
On Windows, try to use the shell to read from the terminal. If that fails
with ENOENT (i.e. bash was not found), use CONIN/OUT as fallback.
Note: To test this, create a UTF-8 credential file with non-ASCII chars,
e.g. in git-bash: 'echo url=http://täst.com > cred.txt'. Then in git-cmd,
'git credential fill <cred.txt' works (shell version), while calling git
without the git-wrapper (i.e. 'mingw64\bin\git credential fill <cred.txt')
mangles non-ASCII chars in both console output and input.
Signed-off-by: Karsten Blees <blees@dcon.de>
MS Visual C suggests that the construct
condition ? (int) i : (ptrdiff_t) d
is incorrect. Let's fix this by casting to ptrdiff_t also for the
positive arm of the conditional.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
On XP, there is no %PROGRAMDATA%, therefore we need to use
"%ALLUSERSPROFILE%\Application Data\Git\config" in those setups.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement symlink() that always creates file symlinks. Fails with ENOSYS
if symlinks are disabled or unsupported.
Note: CreateSymbolicLinkW() was introduced with symlink support in Windows
Vista. For compatibility with Windows XP, we need to load it dynamically
and fail gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
The `git_terminal_prompt()` function expects the terminal window to be
attached to a Win32 Console. However, this is not the case with terminal
windows other than `cmd.exe`'s, e.g. with MSys2's own `mintty`.
Non-cmd terminals such as `mintty` still have to have a Win32 Console
to be proper console programs, but have to hide the Win32 Console to
be able to provide more flexibility (such as being resizeable not only
vertically but also horizontally). By writing to that Win32 Console,
`git_terminal_prompt()` manages only to send the prompt to nowhere and
to wait for input from a Console to which the user has no access.
This commit introduces a function specifically to support `mintty` -- or
other terminals that are compatible with MSys2's `/dev/tty` emulation. We
use the `TERM` environment variable as an indicator for that: if the value
starts with "xterm" (such as `mintty`'s "xterm_256color"), we prefer to
let `xterm_prompt()` handle the user interaction.
The most prominent user of `git_terminal_prompt()` is certainly
`git-remote-https.exe`. It is an interesting use case because both
`stdin` and `stdout` are redirected when Git calls said executable, yet
it still wants to access the terminal.
When running inside a `mintty`, the terminal is not accessible to the
`git-remote-https.exe` program, though, because it is a MinGW program
and the `mintty` terminal is not backed by a Win32 console.
To solve that problem, we simply call out to the shell -- which is an
*MSys2* program and can therefore access `/dev/tty`.
Helped-by: nalla <nalla@hamal.uberspace.de>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Checking the work tree status is quite slow on Windows, due to slow lstat
emulation (git calls lstat once for each file in the index). Windows
operating system APIs seem to be much better at scanning the status
of entire directories than checking single files.
Add an lstat implementation that uses a cache for lstat data. Cache misses
read the entire parent directory and add it to the cache. Subsequent lstat
calls for the same directory are served directly from the cache.
Also implement opendir / readdir / closedir so that they create and use
directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
When a user is registered in a Windows domain, it is really easy to
obtain the email address. So let's do that.
Suggested by Lutz Roeder.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement readlink() by reading NTFS reparse points. Works for symlinks
and directory junctions. If symlinks are disabled, fail with ENOSYS.
Signed-off-by: Karsten Blees <blees@dcon.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
