The configuration variable format.noprefix did not behave as a
proper boolean variable, which has now been fixed and documented.
* kh/format-patch-noprefix-is-boolean:
doc: diff-options.adoc: show format.noprefix for format-patch
format-patch: make format.noprefix a boolean
"git status" learned to show comparison between the current branch
and various other branches listed on status.compareBranches
configuration.
* hn/status-compare-with-push:
status: add status.compareBranches config for multiple branch comparisons
refactor format_branch_comparison in preparation
Allow the directory in which reference backends store their data to
be specified.
* kn/ref-location:
refs: add GIT_REFERENCE_BACKEND to specify reference backend
refs: allow reference location in refstorage config
refs: receive and use the reference storage payload
refs: move out stub modification to generic layer
refs: extract out `refs_create_refdir_stubs()`
setup: don't modify repo in `create_reference_database()`
Add a new configuration variable status.compareBranches that allows
users to specify a space-separated list of branch comparisons in
git status output.
Supported values:
- @{upstream} for the current branch's upstream tracking branch
- @{push} for the current branch's push destination
Any other value is ignored and a warning is shown.
When not configured, the default behavior is equivalent to setting
`status.compareBranches = @{upstream}`, preserving backward
compatibility.
The advice messages shown are context-aware:
- "git pull" advice is shown only when comparing against @{upstream}
- "git push" advice is shown only when comparing against @{push}
- Divergence advice is shown for upstream branch comparisons
This is useful for triangular workflows where the upstream tracking
branch differs from the push destination, allowing users to see their
status relative to both branches at once.
Example configuration:
[status]
compareBranches = @{upstream} @{push}
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list" and friends learn "--maximal-only" to show only the
commits that are not reachable by other commits.
* ds/revision-maximal-only:
revision: add --maximal-only option
"auto filter" logic for large-object promisor remote.
* cc/lop-filter-auto:
fetch-pack: wire up and enable auto filter logic
promisor-remote: change promisor_remote_reply()'s signature
promisor-remote: keep advertised filters in memory
list-objects-filter-options: support 'auto' mode for --filter
doc: fetch: document `--filter=<filter-spec>` option
fetch: make filter_options local to cmd_fetch()
clone: make filter_options local to cmd_clone()
promisor-remote: allow a client to store fields
promisor-remote: refactor initialising field lists
Git allows setting a different object directory via
'GIT_OBJECT_DIRECTORY', but provides no equivalent for references. In
the previous commit we extended the 'extensions.refStorage' config to
also support an URI input for reference backend with location.
Let's also add a new environment variable 'GIT_REFERENCE_BACKEND' that
takes in the same input as the config variable. Having an environment
variable allows us to modify the reference backend and location on the
fly for individual Git commands.
The environment variable also allows usage of alternate reference
directories during 'git-clone(1)' and 'git-init(1)'. Add the config to
the repository when created with the environment variable set.
When initializing the repository with an alternate reference folder,
create the required stubs in the repositories $GIT_DIR. The inverse,
i.e. removal of the ref store doesn't clean up the stubs in the $GIT_DIR
since that would render it unusable. Removal of ref store is only used
when migrating between ref formats and cleanup of the $GIT_DIR doesn't
make sense in such a situation.
Helped-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'extensions.refStorage' config is used to specify the reference
backend for a given repository. Both the 'files' and 'reftable' backends
utilize the $GIT_DIR as the reference folder by default in
`get_main_ref_store()`.
Since the reference backends are pluggable, this means that they could
work with out-of-tree reference directories too. Extend the 'refStorage'
config to also support taking an URI input, where users can specify the
reference backend and the location.
Add the required changes to obtain and propagate this value to the
individual backends. Add the necessary documentation and tests.
Traditionally, for linked worktrees, references were stored in the
'$GIT_DIR/worktrees/<wt_id>' path. But when using an alternate reference
storage path, it doesn't make sense to store the main worktree
references in the new path, and the linked worktree references in the
$GIT_DIR. So, let's store linked worktree references in
'$ALTERNATE_REFERENCE_DIR/worktrees/<wt_id>'. To do this, create the
necessary files and folders while also adding stubs in the $GIT_DIR path
to ensure that it is still considered a Git directory.
Ideally, we would want to pass in a `struct worktree *` to individual
backends, instead of passing the `gitdir`. This allows them to handle
worktree specific logic. Currently, that is not possible since the
worktree code is:
- Tied to using the global `the_repository` variable.
- Is not setup before the reference database during initialization of
the repository.
Add a TODO in 'refs.c' to ensure we can eventually make that change.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-format-patch(1) uses `format.noprefix` and ignores `diff.noprefix`.
The configuration variable `format.prefix` was added as an “escape
hatch”, and “it’s unlikely that anybody really wants format.
noprefix=true in the first place.”[1] Based on that there doesn’t
seem to be a need to widely advertise this configuration variable.
But in any case: the documentation for this option should not claim
that it overrides a config that is always ignored.
† 1: 8d5213de (format-patch: add format.noprefix option, 2023-03-09)
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --from=<me>" did not honor the command line
option when writing out the cover letter, which has been corrected.
* mf/format-patch-honor-from-for-cover-letter:
format-patch: fix From header in cover letter
Extend the alias configuration syntax to allow aliases using
characters outside ASCII alphanumeric (plus '-').
* jh/alias-i18n:
completion: fix zsh alias listing for subsection aliases
alias: support non-alphanumeric names via subsection syntax
alias: prepare for subsection aliases
help: use list_aliases() for alias listing
UI improvements for "git history reword".
* ps/history-ergonomics-updates:
Documentation/git-history: document default for "--update-refs="
builtin/history: rename "--ref-action=" to "--update-refs="
builtin/history: replace "--ref-action=print" with "--dry-run"
builtin/history: check for merges before asking for user input
builtin/history: perform revwalk checks before asking for user input
A handful of places used refs_for_each_ref_in() API incorrectly,
which has been corrected.
* ps/for-each-ref-in-fixes:
bisect: simplify string_list memory handling
bisect: fix misuse of `refs_for_each_ref_in()`
pack-bitmap: fix bug with exact ref match in "pack.preferBitmapTips"
pack-bitmap: deduplicate logic to iterate over preferred bitmap tips
"git repo info" learns "--keys" action to list known keys.
* lo/repo-info-keys:
repo: add new flag --keys to git-repo-info
repo: rename the output format "keyvalue" to "lines"
The "pack.preferBitmapTips" configuration allows the user to specify
which references should be preferred when generating bitmaps. This
option is typically expected to be set to a reference prefix, like for
example "refs/heads/".
It's not unreasonable though for a user to configure one specific
reference as preferred. But if they do, they'll hit a `BUG()`:
$ git -c pack.preferBitmapTips=refs/heads/main repack -adb
BUG: ../refs/iterator.c:366: attempt to trim too many characters
error: pack-objects died of signal 6
The root cause for this bug is how we enumerate these references. We
call `refs_for_each_ref_in()`, which will:
- Yield all references that have a user-specified prefix.
- Trim each of these references so that the prefix is removed.
Typically, this function is called with a trailing slash, like
"refs/heads/", and in that case things work alright. But if the function
is called with the name of an existing reference then we'll try to trim
the full reference name, which would leave us with an empty name. And as
this would not really leave us with anything sensible, we call `BUG()`
instead of yielding this reference.
One could argue that this is a bug in `refs_for_each_ref_in()`. But the
question then becomes what the correct behaviour would be:
- Do we want to skip exact matches? In our case we certainly don't
want that, as the user has asked us to generate a bitmap for it.
- Do we want to yield the reference with the empty refname? That would
lead to a somewhat weird result.
Neither of these feel like viable options, so calling `BUG()` feels like
a sensible way out. The root cause ultimately is that we even try to
trim the whole refname in the first place. There are two possible ways
to fix this issue:
- We can fix the bug by using `refs_for_each_fullref_in()` instead,
which does not strip the prefix at all. Consequently, we would now
start to accept all references that start with the configured
prefix, including exact matches. So if we had "refs/heads/main", we
would both match "refs/heads/main" and "refs/heads/main-branch".
- Or we can fix the bug by appending a slash to the prefix if it
doesn't already have one. This would mean that we only match
ref hierarchies that start with this prefix.
While the first fix leaves the user with strictly _more_ configuration
options, we have already fixed a similar case in 10e8a9352b (refs.c:
stop matching non-directory prefixes in exclude patterns, 2025-03-06) by
using the second option. So for the sake of consistency, let's apply the
same fix here.
Clarify the documentation accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git alias names are limited to ASCII alphanumeric characters and
dashes because aliases are implemented as config variable names.
This prevents aliases being created in languages using characters outside that range.
Add support for arbitrary alias names by using config subsections:
[alias "förgrena"]
command = branch
The subsection name is matched as-is (case-sensitive byte comparison),
while the existing definition without a subsection (e.g.,
"[alias] co = checkout") remains case-insensitive for backward
compatibility. This uses existing config infrastructure since
subsections already support arbitrary bytes, and avoids introducing
Unicode normalization.
Also teach the help subsystem about the new syntax so that "git help
-a" properly lists subsection aliases and the autocorrect feature can
suggest them. Use utf8_strwidth() instead of strlen() for column
alignment so that non-ASCII alias names display correctly.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Jonatan Holmgren <jonatan@jontes.page>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c39952b92 (fetch: choose a sensible default with --jobs=0 again,
2023-02-20), the `--jobs=0` behavior was (re)introduced, but it went
undocumented. Since this is the same behavior as `git -c fetch.parallel=0
fetch`, which is documented, this change creates symmetry between the two
documentation sections.
Signed-off-by: Daniel D. Beck <daniel@ddbeck.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" takes "--from=<user ident>" command line option
and uses the given ident for patch e-mails, but this is not applied
to the cover letter, the option is ignored and the committer ident
of the current user is used. This has been the case ever since
"--from" was introduced in a9080475 (teach format-patch to place
other authors into in-body "From", 2013-07-03).
Teach the make_cover_letter() function to honor the option, instead of
always using the current committer identity. Change variable name from
"committer" to "from" to better reflect the purpose of the variable.
Signed-off-by: Mirko Faina <mroik@delayed.space>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list" and friends learn "--maximal-only" to show only the
commits that are not reachable by other commits.
* ds/revision-maximal-only:
revision: add --maximal-only option
"auto filter" logic for large-object promisor remote.
* cc/lop-filter-auto:
fetch-pack: wire up and enable auto filter logic
promisor-remote: change promisor_remote_reply()'s signature
promisor-remote: keep advertised filters in memory
list-objects-filter-options: support 'auto' mode for --filter
doc: fetch: document `--filter=<filter-spec>` option
fetch: make filter_options local to cmd_fetch()
clone: make filter_options local to cmd_clone()
promisor-remote: allow a client to store fields
promisor-remote: refactor initialising field lists
"git merge-file" can be run outside a repository, but it ignored
all configuration, even the per-user ones. The command now uses
available configuration files to find its customization.
* yt/merge-file-outside-a-repository:
merge-file: honor merge.conflictStyle outside of a repository
A handful of documentation pages have been modernized to use the
"synopsis" style.
* ja/doc-synopsis-style-even-more:
doc: convert git-show to synopsis style
doc: fix some style issues in git-clone and for-each-ref-options
doc: finalize git-clone documentation conversion to synopsis style
doc: convert git-submodule to synopsis style
Allow recording process ID of the process that holds the lock next
to a lockfile for diagnosis.
* pc/lockfile-pid:
lockfile: add PID file for debugging stale locks
Previous commits have set up an infrastructure for `--filter=auto` to
automatically prepare a partial clone filter based on what the server
advertised and the client accepted.
Using that infrastructure, let's now enable the `--filter=auto` option
in `git clone` and `git fetch` by setting `allow_auto_filter` to 1.
Note that these small changes mean that when `git clone --filter=auto`
or `git fetch --filter=auto` are used, "auto" is automatically saved
as the partial clone filter for the server on the client. Therefore
subsequent calls to `git fetch` on the client will automatically use
this "auto" mode even without `--filter=auto`.
Let's also set `allow_auto_filter` to 1 in `transport.c`, as the
transport layer must be able to accept the "auto" filter spec even if
the invoking command hasn't fully parsed it yet.
When an "auto" filter is requested, let's have the "fetch-pack.c" code
in `do_fetch_pack_v2()` compute a filter and send it to the server.
In `do_fetch_pack_v2()` the logic also needs to check for the
"promisor-remote" capability and call `promisor_remote_reply()` to
parse advertised remotes and populate the list of those accepted (and
their filters).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--filter=<filter-spec>` option is documented in most commands that
support it except `git fetch`.
Let's fix that and document this option. To ensure consistency across
commands, let's reuse the exact description currently found in
`git clone`.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit allowed a server to pass additional fields through
the "promisor-remote" protocol capability after the "name" and "url"
fields, specifically the "partialCloneFilter" and "token" fields.
Another previous commit, c213820c51 (promisor-remote: allow a client
to check fields, 2025-09-08), has made it possible for a client to
decide if it accepts a promisor remote advertised by a server based
on these additional fields.
Often though, it would be interesting for the client to just store in
its configuration files these additional fields passed by the server,
so that it can use them when needed.
For example if a token is necessary to access a promisor remote, that
token could be updated frequently only on the server side and then
passed to all the clients through the "promisor-remote" capability,
avoiding the need to update it on all the clients manually.
Storing the token on the client side makes sure that the token is
available when the client needs to access the promisor remotes for a
lazy fetch.
To allow this, let's introduce a new "promisor.storeFields"
configuration variable.
Note that for a partial clone filter, it's less interesting to have
it stored on the client. This is because a filter should be used
right away and we already pass a `--filter=<filter-spec>` option to
`git clone` when starting a partial clone. Storing the filter could
perhaps still be interesting for information purposes.
Like "promisor.checkFields" and "promisor.sendFields", the new
configuration variable should contain a comma or space separated list
of field names. Only the "partialCloneFilter" and "token" field names
are supported for now.
When a server advertises a promisor remote, for example "foo", along
with for example "token=XXXXX" to a client, and on the client side
"promisor.storeFields" contains "token", then the client will store
XXXXX for the "remote.foo.token" variable in its configuration file
and reload its configuration so it can immediately use this new
configuration variable.
A message is emitted on stderr to warn users when the config is
changed.
Note that even if "promisor.acceptFromServer" is set to "all", a
promisor remote has to be already configured on the client side for
some of its config to be changed. In any case no new remote is
configured and no new URL is stored.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cherry(1) links to this command. These two commands are similar and
we also mention it in the “Examples” section now. Let’s link to it.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The utility and usability of git-patch-id(1) was discussed
relatively recently:[1]
Using "git patch-id" is definitely in the "write a script for it"
category. I don't think I've ever used it as-is from the command
line as part of a one-liner. It's very much a command that is
designed purely for scripting, the interface is just odd and baroque
and doesn't really make sense for one-liners.
The typical use of patch-id is to generate two *lists* of patch-ids,
then sort them and use the patch-id as a key to find commits that
look the same.
The command doc *could* use an example, and since it is a mapper command
it makes sense for that example to be a little script.
Mapping the commits of some branch to an upstream ref allows us to
demonstrate generating two lists, sorting them, joining them, and
finally discarding the patch ID lookup column with cut(1).
† 1: https://lore.kernel.org/workflows/CAHk-=wiN+8EUoik4UeAJ-HPSU7hczQP+8+_uP3vtAy_=YfJ9PQ@mail.gmail.com/
Inspired-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emphasize that you can pass multiple patches or diffs to this command.
git-patch-id(1) is an efficient pID–commit mapper, able to map
thousands of commits in seconds. But discussions on the command
seem to typically[1] use the standard loop-over-rev-list-and-
shell-out pattern:
for commit in rev-list:
prepare a diff from commit | git patch-id
This is unnecessary; we can bulk-process the patches:
git rev-list --no-merges <ref> |
git diff-tree --patch --stdin |
git patch-id --stable
The first version (translated to shell) takes a little over nine
minutes for a commit history of about 78K commits.[2] The other one,
by contrast, takes slightly less than a minute.
Also drop “the” from “standard input”.
† 1: https://stackoverflow.com/a/19758159
† 2: This is `master` of this repository on 2025-10-02
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we document the values that can be passed to the "--update-refs="
option, we don't give the user any hint what the default behaviour is.
Document it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the preceding commit we have changed "--ref-action=" to only
control which refs are supposed to be updated, not what happens with
them. As a consequence, the option is now somewhat misnamed, as we don't
control the action itself anymore.
Rename it to "--update-refs=" to better align it with its new use.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-history(1) command has the ability to perform a dry-run
that will not end up modifying any references. Instead, we'll only print
any ref updates that would happen as a consequence of performing the
operation.
This mode is somewhat hidden though behind the "--ref-action=print"
option. This command line option has its origin in git-replay(1), where
it's probably an okayish interface as this command is sitting more on
the plumbing side of tools. But git-history(1) is a user-facing tool,
and this way of achieving a dry-run is way too technical and thus not
very discoverable.
Besides usability issues, it also has another issue: the dry-run mode
will always operate as if the user wanted to rewrite all branches. But
in fact, the user also has the option to only update the HEAD reference,
and they might want to perform a dry-run of such an operation, too. We
could of course introduce "--ref-action=print-head", but that would
become even less ergonomic.
Replace "--ref-action=print" with a new "--dry-run" toggle. This new
toggle works with both "--ref-action={head,branches}" and is way more
discoverable.
Add a test to verify that both "--ref-action=" values behave as
expected.
This patch is best viewed with "--ignore-space-change".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user wants to find what are the available keys, they need to
either check the documentation or to ask for all the key-value pairs
by using --all.
Add a new flag --keys for listing only the available keys without
listing the values.
Signed-off-by: Lucas Seiki Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both subcommands in git-repo(1) accept the "keyvalue" format. This
format is newline-delimited, where the key is separated from the
value with an equals sign.
The name of this option is suboptimal though, as it is both too
limiting while at the same time not really indicating what it
actually does:
- There is no mention of the format being newline-delimited, which
is the key differentiator to the "nul" format.
- Both "nul" and "keyvalue" have a key and a value, so the latter
is not exactly giving any hint what makes it so special.
- "keyvalue" requires there to be, well, a key and a value, but we
want to add additional output that is only going to be newline
delimited.
Taken together, "keyvalue" is kind of a bad name for this output
format.
Luckily, the git-repo(1) command is still rather new and marked as
experimental, so things aren't cast into stone yet. Rename the
format to "lines" instead to better indicate that the major
difference is that we'll get newline-delimited output. This new name
will also be a better fit for a subsequent extension in git-repo(1).
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Lucas Seiki Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
