A user can specify a filename to a command from the command line,
either as the value given to a command line option, or a command
line argument. When it is given as a relative filename, in the
user's mind, it is relative to the directory "git" was started from,
but by the time the filename is used, "git" would almost always have
chdir()'ed up to the root level of the working tree.
The given filename, if it is relative, needs to be prefixed with the
path to the current directory, and it typically is done by calling
prefix_filename() helper function. For commands that can also take
"-" to use the standard input or the standard output, however, this
needs to be done with care.
"git bundle create" uses the next word on the command line as the
output filename, and can take "-" to mean "write to the standard
output". It blindly called prefix_filename(), so running it in a
subdirectory did not quite work as expected.
Introduce a new helper, prefix_filename_except_for_dash(), and use
it to help "git bundle create" codepath.
Reported-by: Michael Henry
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For writing, "bundle create -" indicates that the bundle should be
written to stdout. But there's no matching handling of "-" for reading
operations. This is inconsistent, and a little inflexible (though one
can always use "/dev/stdin" on systems that support it).
However, it's easy to change. Once upon a time, the bundle-reading code
required a seekable descriptor, but that was fixed long ago in
e9ee84cf28 (bundle: allowing to read from an unseekable fd,
2011-10-13). So we just need to handle "-" explicitly when opening the
file.
We _could_ do this by handling "-" in read_bundle_header(), which the
reading functions all call already. But that is probably a bad idea.
It's also used by low-level code like the transport functions, and we
may want to be more careful there. We do not know that stdin is even
available to us, and certainly we would not want to get confused by a
configured URL that happens to point to "-".
So instead, let's add a helper to builtin/bundle.c. Since both the
bundle code and some of the callers refer to the bundle by name for
error messages, let's use the string "<stdin>" to make the output a bit
nicer to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 79862b6b77 (bundle-create: progress output control, 2019-11-10),
"bundle create" learned about the --all-progress and
--all-progress-implied options, which were copied from pack-objects.
I think these were a mistake.
In pack-objects, "all-progress-implied" is about switching the behavior
between a regular on-disk "git repack" and the use of pack-objects for
push/fetch (where a fetch does not want progress from the server during
the write stage; the client will print progress as it receives the
data). But there's no such distinction for bundles. Prior to
79862b6b77, we always printed the write stage. Afterwards, a vanilla:
git bundle create foo.bundle
omits the write progress, appearing to hang (especially if your
repository is large or your disk is slow). That seems like a regression.
It's possible that the flexibility to disable the write-phase progress
_could_ be useful for bundle. E.g., if you did something like:
ssh some-host git bundle create foo.bundle |
git bundle unbundle
But if you are running both in real-time, why are you using bundles in
the first place? You're better off doing a real fetch.
But even if we did want to support that, it should be the exception, and
vanilla "bundle create" should display the full progress. So we'd want
to name the option "--no-write-progress" or something.
The "--all-progress" option itself is even worse. It exists in
pack-objects only for historical reasons. It's a mistake because it
implies "--progress", and we added "--all-progress-implied" to fix that.
There is no reason to propagate that mistake to new commands.
Likewise, the documentation for these options was pulled from
pack-objects. But it doesn't make any sense in this context. It talks
about "--stdout", but that is not even an option that git-bundle
supports.
This patch flips the default for "--all-progress-implied" back to
"true", fixing the regression in 79862b6b77. This turns that option
into a noop, and means that "--all-progress" is really the same as
"--progress". We _could_ drop them completely, but since they've been
shipped with Git since v2.25.0, it's polite to continue accepting them.
I didn't implement any sort of "--no-write-progress" here. I'm not at
all convinced it's necessary, and the discussion from the original
thread:
https://lore.kernel.org/git/20191110204126.30553-2-robbat2@gentoo.org/
shows that that the main focus was on getting --progress and --quiet
support, and not any kind of clever "real-time bundle over the network"
feature. But technically this patch is making it impossible to do
something that you _could_ do post-79862b6b77c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting an empty commit, it is surprising that a totally empty
file is generated. Set the flag to always print the header, matching
the behaviour of git-log.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We discourage the creation/update of single-level refs
because some upper-layer applications only work in specified
reference namespaces, such as "refs/heads/*" or "refs/tags/*",
these single-level refnames may not be recognized. However,
we still hope users can delete them which have been created
by mistake.
Therefore, when updating branches on the server with
"git receive-pack", by checking whether it is a branch deletion
operation, it will determine whether to allow the update of
a single-level refs. This avoids creating/updating such
single-level refs, but allows them to be deleted.
On the client side, "git push" also does not properly fill in
the old-oid of single-level refs, which causes the server-side
"git receive-pack" to think that the ref's old-oid has changed
when deleting single-level refs, this causes the push to be
rejected. So the solution is to fix the client to be able to
delete single-level refs by properly filling old-oid.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes to code that parses the todo file used in "rebase -i".
* pw/rebase-i-parse-fix:
rebase -i: fix parsing of "fixup -C<commit>"
rebase -i: match whole word in is_command()
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
Add the value of the WWW-Authenticate response header to credential
requests. Credential helpers that understand and support HTTP
authentication and authorization can use this standard header (RFC 2616
Section 14.47 [1]) to generate valid credentials.
WWW-Authenticate headers can contain information pertaining to the
authority, authentication mechanism, or extra parameters/scopes that are
required.
The current I/O format for credential helpers only allows for unique
names for properties/attributes, so in order to transmit multiple header
values (with a specific order) we introduce a new convention whereby a
C-style array syntax is used in the property name to denote multiple
ordered values for the same property.
In this case we send multiple `wwwauth[]` properties where the order
that the repeated attributes appear in the conversation reflects the
order that the WWW-Authenticate headers appeared in the HTTP response.
Add a set of tests to exercise the HTTP authentication header parsing
and the interop with credential helpers. Credential helpers will receive
WWW-Authenticate information in credential requests.
[1] https://datatracker.ietf.org/doc/html/rfc2616#section-14.47
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test showing simple anoymous HTTP access to an unprotected
repository, that results in no credential helper invocations.
Also add a test demonstrating simple basic authentication with
simple credential helper support.
Leverage a no-parsed headers (NPH) CGI script so that we can directly
control the HTTP responses to simulate a multitude of good, bad and ugly
remote server implementations around auth.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format.attach configuration variable lacked a way to override a
value defined in a lower-priority configuration file (e.g. the
system one) by redefining it in a higher-priority configuration
file. Now, setting format.attach to an empty string means show the
patch inline in the e-mail message, without using MIME attachment.
This is a backward incompatible change.
* jc/countermand-format-attach:
format.attach: allow empty value to disable multi-part messages
sscanf(3) used in "git symbolic-ref --short" implementation found
to be not working reliably on macOS in UTF-8 locales. Rewrite the
code to avoid sscanf() altogether to work it around.
* jk/shorten-unambiguous-ref-wo-sscanf:
shorten_unambiguous_ref(): avoid sscanf()
shorten_unambiguous_ref(): use NUM_REV_PARSE_RULES constant
shorten_unambiguous_ref(): avoid integer truncation
The credential subsystem learned that a password may have an
explicit expiration.
* mh/credential-password-expiry:
credential: new attribute password_expiry_utc
"git archive HEAD^{tree}" records the paths with the current
timestamp in the archive, making it harder to obtain a stable
output. The command learned the --mtime option to specify an
arbitrary timestamp (e.g. --mtime="@0 +0000" for the epoch).
* rs/archive-mtime:
archive: add --mtime
Remove leftover and unused code.
* tb/drop-dir-iterator-follow-symlink-bit:
t0066: drop setup of "dir5"
dir-iterator: drop unused `DIR_ITERATOR_FOLLOW_SYMLINKS`
The "diff" drivers specified by the "diff" attribute attached to
paths can now specify which algorithm (e.g. histogram) to use.
* jc/diff-algo-attribute:
diff: teach diff to read algorithm from diff driver
diff: consolidate diff algorithm option parsing
An invalid label or ref in the "rebase -i" todo file used to
trigger an runtime error. SUch an error is now diagnosed while the
todo file is parsed.
* pw/rebase-i-validate-labels-early:
rebase -i: check labels and refs when parsing todo list
The 'restore' command already rejects the --merge, --conflict, --ours
and --theirs options when combined with --staged, but accepts them when
--worktree is added as well.
Unfortunately that doesn't appear to do anything useful. The --ours and
--theirs options seem to be ignored when both --staged and --worktree
are given, whereas with --merge or --conflict, the command has the same
effect as if the --staged option wasn't present.
So reject those options with '--staged --worktree' as well, using
opts->accept_ref to distinguish restore from checkout.
Add test for both '--staged' and '--staged --worktree'.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
git -c fetch.hideRefs=refs \
-c fetch.hideRefs='!refs/remotes/$REMOTE/' \
fetch $REMOTE
[1] `git rev-list --objects --stdin --not --all --quiet --alternate-refs'
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a comment describing how each test file should start was added in
commit [1], it was the second comment of t/test-lib.sh. The comment
describes how variable "test_description" is supposed to be assigned at
the top of each test file and how "test-lib.sh" should be used by
sourcing it. However, even in [1], the comment was ten lines away from
the usage of the variable by test-lib.sh. Since then, the comment has
drifted away both from the top of the file and from the usage of the
variable. The comment just sits in the middle of the initialization of
the test library, surrounded by unrelated code, almost one hundred lines
away from the usage of "test_description".
Nobody has noticed this drift during evolution of test-lib.sh, which
suggests that this comment has outlived its usefulness. The assignment
of "test_description", sourcing of "test-lib.sh" by tests, and the
process of writing tests in general are described in detail in
"t/README". So drop the obsolete comment.
An alternative solution could be to move the comment either to the top
of the file, or down to the usage of variable "test_description".
[1] e1970ce43a ("[PATCH 1/2] Test framework take two.", 2005-05-13)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a directory exists but has only ignored files within it and we are
trying to switch to a branch that has a file where that directory is,
the behavior depends upon --[no]-overwrite-ignore. If the user wants to
--overwrite-ignore (the default), then we should delete the ignored file
and directory and switch to the new branch.
The code to handle this in verify_clean_subdirectory() in unpack-trees
tried to handle this via paying attention to the exclude_per_dir setting
of the internal dir field. This came from commit c81935348b ("Fix
switching to a branch with D/F when current branch has file D.",
2007-03-15), which pre-dated 039bc64e88 ("core.excludesfile clean-up",
2007-11-14), and thus did not pay attention to ignore patterns from
other relevant files. Change it to use setup_standard_excludes() so
that it is also aware of excludes specified in other locations.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2021.6 existed to test the status of a symlink that was left around by
previous tests. It tried to also clean up the symlink after it was done
so that subsequent tests wouldn't be tripped up by it. Unfortunately,
since this test had a SYMLINK prerequisite, that made the cleanup
platform dependent...and made a testcase I was trying to add to this
testsuite fail (that testcase will be included in the next patch).
Before we go and add new testcases, fix this cleanup by moving it into a
separate test.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5883034 (checkout: reject if the branch is already checked out
elsewhere) in normal use, we do not allow multiple worktrees having the
same checked out branch.
A bug has recently been fixed that caused this to not work as expected.
Let's add a test to notice if this changes in the future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b5cabb4a9 (rebase: refuse to switch to branch already checked out
elsewhere, 2020-02-23) we add a condition to prevent a rebase operation
involving a switch to a branch that is already checked out in another
worktree.
A bug has recently been fixed that caused this to not work as expected.
Let's add a test to notice if this changes in the future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The style of t9700-perl-git.sh is old. There are 3 problems:
* A title is not on the same line with test_expect_success command.
* A test body is indented by whitespaces.
* There are whitespaces after redirect operators.
Modernize test scripts by:
* Combine the title with test_expect_success command.
* Replace whitespace indents with TAB.
* Delete whitespaces after redirect operators.
Signed-off-by: Zhang Yi <18994118902@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --jobs=0" used to hit a BUG(), which has been corrected
to use the available CPUs.
* ma/fetch-parallel-use-online-cpus:
fetch: choose a sensible default with --jobs=0 again
A test helper had a single write(2) of 256kB, which was too big for
some platforms (e.g. NonStop), which has been corrected by using
xwrite() wrapper appropriately.
* jc/genzeros-avoid-raw-write:
test-genzeros: avoid raw write(2)
Error messages given upon a signature verification failure used to
discard the errors from underlying gpg program, which has been
corrected.
* js/gpg-errors:
gpg: do show gpg's error message upon failure
t7510: add a test case that does not need gpg
If we encounter an error in an index file, we may say something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo
But if you have multiple worktrees, each with its own index, it can be
very helpful to know which file had the problem. So let's pass that path
down through the various index-fsck functions and use it where
appropriate. After this patch you should get something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo of .git/worktrees/wt/index
That's a bit verbose, but since the point is that you shouldn't see this
normally, we're better to err on the side of more details.
I've also added the index filename to the name used by "fsck
--name-objects", which will show up if we find the object to be missing,
etc. This is bending the rules a little there, as the option claims to
write names that can be fed to rev-parse. But there is no revision
syntax to access the index of another worktree, so the best we can do is
make up something that a human will probably understand.
I did take care to retain the existing ":file" syntax for the current
worktree. So the uglier output should kick in only when it's actually
necessary. See the included tests for examples of both forms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the index file for the main worktree, but completely ignore the
index files in other worktrees. These should be checked, too, as they
are part of the repository state (and in particular, errors in those
index files may cause repo-wide operations like "git gc" to complain).
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our parallel process API takes several callbacks via function pointers
in the run_process_paralell_opts struct. Not every callback needs every
parameter; let's mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prio_queue_compare_fn interface has a void pointer to allow callers
to pass arbitrary data, but most comparison functions don't need it.
Mark those cases to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Things should be able to depend on object.h without pulling in all of
cache.h. Move an enum to allow this.
Note that a couple files previously depended on things brought in
through cache.h indirectly (revision.h -> commit.h -> object.h ->
cache.h). As such, this change requires making existing dependencies
more explicit in half a dozen files. The inclusion of strbuf.h in
some headers if of particular note: these headers directly embedded a
strbuf in some new structs, meaning they should have been including
strbuf.h all along but were indirectly getting the necessary
definitions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These defines and enum are all oid-related and as such seem to make
more sense being included in hash.h. Further, moving them there
allows us to remove some includes of cache.h in other files.
The change to line-log.h might look unrelated, but line-log.h includes
diffcore.h, which previously included cache.h, which included the
kitchen sink. Since this patch makes diffcore.h no longer include
cache.h, the compiler complains about the 'struct string_list *'
function parameter. Add a forward declaration for struct string_list to
address this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had several C files include cache.h unnecessarily. Replace those
with an include of "git-compat-util.h" instead. Much like the previous
commit, these have all been verified via both ensuring that
gcc -E $SOURCE_FILE | grep '"cache.h"'
found no hits and that
make DEVELOPER=1 ${OBJECT_FILE_FOR_SOURCE_FILE}
successfully compiles without warnings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user omits the space between "-C" and the commit in a fixup
command then it is parsed as an ordinary fixup and the commit message is
not updated as it should be. Fix this by making the space between "-C"
and "<commit>" optional as it is for the "merge" command.
Note that set_replace_editor() is changed to set $GIT_SEQUENCE_EDITOR
instead of $EDITOR in order to be able to replace the todo list and
reword commits with $FAKE_COMMIT_MESSAGE. This is safe as all the
existing users are using set_replace_editor() to replace the todo list.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When matching an unabbreviated command is_command() only does a prefix
match which means it parses "pickled" as TODO_PICK. parse_insn_line()
does error out because is_command() only advances as far as the end of
"pick" so it looks like the command name is not followed by a space but
the error message is "missing arguments for pick" rather than telling
the user that the "pickled" is not a valid command.
Fix this by ensuring the match is follow by whitespace or the end of the
string as we already do for abbreviated commands. The (*bol = p) at the
end of the condition is a bit cute for my taste but I decided to leave
it be for now. Rather than add new tests the existing tests for bad
commands are adapted to use a bad command name that triggers the prefix
matching bug.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of t5559 is run the regular t5551 tests with HTTP/2. But it
does so with the "h2c" protocol, which uses cleartext upgrades from
HTTP/1.1 to HTTP/2 (rather than learning about HTTP/2 support during the
TLS negotiation).
This has a few problems:
- it's not very indicative of the real world. In practice, most servers
that support HTTP/2 will also support TLS.
- support for upgrading does not seem as robust. In particular, we've
run into bugs in some versions of Apache's mod_http2 that trigger
only with the upgrade mode. See:
https://lore.kernel.org/git/Y8ztIqYgVCPILJlO@coredump.intra.peff.net/
So the upside is that this change makes our HTTP/2 tests more robust and
more realistic. The downside is that if we can't set up SSL for any
reason, we'll skip the tests (even though you _might_ have been able to
run the HTTP/2 tests the old way). We could probably have a conditional
fallback, but it would be complicated for little gain, and it's not even
clear it would help (i.e., would any test environment even have HTTP/2
but not SSL support?).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test needs to be tweaked in order for t5559 to pass with SSL/TLS set
up. When we make our initial clone, we check that the curl trace of
requests is what we expected. But we need to fix two things:
- along with ignoring "data" lines from the trace, we need to ignore
"SSL data" lines
- when TLS is used, the server is able to tell the client (via ALPN)
that it supports HTTP/2 before the first HTTP request is made. So
rather than request an upgrade using an HTTP header, it can just
speak HTTP/2 immediately
With this patch, running:
LIB_HTTPD_SSL=1 ./t5559-http-fetch-smart-http2.sh
works, whereas it did not before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 73c49a4474 (t: run t5551 tests with both HTTP and HTTP/2,
2022-11-11) added Apache config to enable HTTP/2. However, it only
enabled the "h2c" protocol, which allows cleartext HTTP/2 (generally
based on an upgrade header during an HTTP/1.1 request). This is what
t5559 is generally testing, since by default we don't set up SSL/TLS.
However, it should be possible to run t5559 with LIB_HTTPD_SSL set. In
that case, Apache will advertise support for HTTP/2 via ALPN during the
TLS handshake. But we need to tell it support "h2" (the non-cleartext
version) to do so. Without that, then curl does not even try to do the
HTTP/1.1 upgrade (presumably because after seeing that we did TLS but
didn't get the ALPN indicator, it assumes it would be fruitless).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the HTTP tests are run with LIB_HTTPD_SSL in the environment, then
we access the test server as https://. This causes expect_askpass to
complain, because it tries to blindly match "http://" in the prompt
shown to the user. We can adjust this to use $HTTPD_PROTO, which is set
during the setup phase.
Note that this is enough for t5551 and t5559 to pass when run with
https, but there are similar problems in other scripts that will need to
be fixed before the whole suite can run with LIB_HTTPD_SSL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pick apart a curl trace, looking for "=> Send header:" and so on, and
matching against an expected set of requests and responses. We remove
"== Info" lines entirely. However, our parser is fooled when running the
test with LIB_HTTPD_SSL on Ubuntu 20.04 (as found in our linux-gcc CI
job), as curl hands us an "Info" buffer with a newline, and we get:
== Info: successfully set certificate verify locations:
== Info: CAfile: /etc/ssl/certs/ca-certificates.crt
CApath: /etc/ssl/certs
=> Send SSL data[...]
which results in the "CApath" line ending up in the cleaned-up output,
causing the test to fail.
Arguably the tracing code should detect this and put it on two separate
"== Info" lines. But this is actually a curl bug, fixed by their
80d73bcca (tls: provide the CApath verbose log on its own line,
2020-08-18). It's simpler to just work around it here.
Since we are using GIT_TRACE_CURL, every line should just start with one
of "<=", "==", or "=>", and we can throw away anything else. In fact, we
can just replace the pattern for deleting "*" lines. Those were from the
old GIT_CURL_VERBOSE output, but we switched over in 14e24114d9
(t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var,
2016-09-05).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
