Since stash list accepts git-log options, add the following useful
options that make sense in the context of the `git stash list` command:
--name-status --oneline --patch-with-stat
Signed-off-by: Steven Fernandez <steve@lonetwin.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If only hash literals are given on a "git fetch" command-line, tag
following is not requested, and the fetch is done using protocol v2, a
list of refs is not required from the remote. Therefore, optimize by
invoking transport_get_remote_refs() only if we need the refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The built-in bundle transport and the transport helper interface do not
work when transport_fetch_refs() is called immediately after transport
creation. This will be needed in a subsequent patch, so fix this.
Evidence: fetch_refs_from_bundle() relies on data->header being
initialized in get_refs_from_bundle(), and fetch() in transport-helper.c
relies on either data->fetch or data->import being set by get_helper(),
but neither transport_helper_init() nor fetch() calls get_helper().
Up until the introduction of the partial clone feature, this has not
been a problem, because transport_fetch_refs() is always called after
transport_get_remote_refs(). With the introduction of the partial clone
feature, which involves calling transport_fetch_refs() (to fetch objects
by their OIDs) without transport_get_remote_refs(), this is still not a
problem, but only coincidentally - we do not support partially cloning a
bundle, and as for cloning using a transport-helper-using protocol, it
so happens that before transport_fetch_refs() is called, fetch_refs() in
fetch-object.c calls transport_set_option(), which means that the
aforementioned get_helper() is invoked through set_helper_option() in
transport-helper.c.
This could be fixed by fixing the transports themselves, but it doesn't
seem like a good idea to me to open up previously untested code paths;
also, there may be transport helpers in the wild that assume that "list"
is always called before "fetch". Instead, fix this by having
transport_fetch_refs() call transport_get_remote_refs() to ensure that
the latter is always called at least once, unless the transport
explicitly states that it supports fetching without listing refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When all refs to be fetched are exact OIDs, it is possible to perform a
fetch without requiring the remote to list refs if protocol v2 is used.
Teach Git to do this.
This currently has an effect only for lazy fetches done from partial
clones. The change necessary to likewise optimize "git fetch <remote>
<sha-1>" will be done in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_refs_via_connect() function both performs the handshake
(including determining the protocol version) and obtaining the list of
remote refs. However, the fetch protocol v2 supports fetching objects
without the listing of refs, so make it possible for the user to skip
the listing by creating a new handshake() function. This will be used in
a subsequent commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach list-objects the "tree:0" filter which allows for filtering
out all tree and blob objects (unless other objects are explicitly
specified by the user). The purpose of this patch is to allow smaller
partial clones.
The name of this filter - tree:0 - does not explicitly specify that
it also filters out all blobs, but this should not cause much confusion
because blobs are not at all useful without the trees that refer to
them.
I also considered only:commits as a name, but this is inaccurate because
it suggests that annotated tags are omitted, but actually they are
included.
The name "tree:0" allows later filtering based on depth, i.e. "tree:1"
would filter out all but the root tree and blobs. In order to avoid
confusion between 0 and capital O, the documentation was worded in a
somewhat round-about way that also hints at this future improvement to
the feature.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function gently_parse_list_objects_filter is either called with
errbuf=STRBUF_INIT or errbuf=NULL, but that function calls strbuf_init
when errbuf is not NULL. strbuf_init is only necessary if errbuf
contains garbage, and risks a memory leak if errbuf already has a
non-STRBUF_INIT state. It should be the caller's responsibility to make
sure errbuf is not garbage, since garbage content is easily avoidable
with STRBUF_INIT.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases in this file, BUG makes more sense than die. In such
cases, a we get there from a coding error rather than a user error.
'return' has been removed following some instances of BUG since BUG does
not return.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, list-objects.c incorrectly treats all root trees of commits
as USER_GIVEN. Also, it would be easier to mark objects that are
non-user-given instead of user-given, since the places in the code
where we access an object through a reference are more obvious than
the places where we access an object that was given by the user.
Resolve these two problems by introducing a flag NOT_USER_GIVEN that
marks blobs and trees that are non-user-given, replacing USER_GIVEN.
(Only blobs and trees are marked because this mark is only used when
filtering objects, and filtering of other types of objects is not
supported yet.)
This fixes a bug in that git rev-list behaved differently from git
pack-objects. pack-objects would *not* filter objects given explicitly
on the command line and rev-list would filter. This was because the two
commands used a different function to add objects to the rev_info
struct. This seems to have been an oversight, and pack-objects has the
correct behavior, so I added a test to make sure that rev-list now
behaves properly.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we assumed only blob objects could be missing. This patch
makes rev-list handle missing trees like missing blobs. The --missing=*
and --exclude-promisor-objects flags now work for trees as they already
do for blobs. This is demonstrated in t6112.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a common mistake to put positional arguments before flags when
invoking git-rev-list. Order the positional arguments last.
This patch skips git-rev-list invocations which include the --not flag,
since the ordering of flags and positional arguments affects the
behavior. This patch also skips invocations of git-rev-list that occur
in command substitution in which the exit code is discarded, since
fixing those properly will require a more involved cleanup.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git ... | foo' will mask any errors or crashes in git, so split up such
pipes in this file.
One testcase uses several separate pipe sequences in a row which are
awkward to split up. Wrap the split-up pipe in a function so the
awkwardness is not repeated. Also change that testcase's surrounding
quotes from double to single to avoid premature string interpolation.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some pipes in tests lose the exit code of git processes, which can mask
unexpected behavior like crashes. Split these pipes up so that git
commands are only at the end of pipes rather than the beginning or
middle.
The violations fixed in this patch were found in the process of fixing
pipe placement in a prior patch.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a line-continuation and pipe on the second line, take
advantage of the shell's implicit line continuation after a pipe
character. So for example, instead of
some long line \
| next line
use
some long line |
next line
And add a blank line before and after the pipe where it aids readability
(it usually does).
This better matches the coding style documented in
Documentation/CodingGuidelines and used in shell scripts elsewhere in
the tree.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the following guideline to Documentation/CodingGuidelines:
Break overlong lines after "&&", "||", and "|", not before
them; that way the command can continue to subsequent lines
without backslash at the end.
And the following to t/README (since it is specific to writing tests):
Pipes and $(git ...) should be avoided when they swallow exit
codes of Git processes
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of Don'ts for test writing has grown large such that it is hard
to see at a glance which section an item is in. In other words, if I
ignore a little bit of surrounding context, the "don'ts" look like
"do's."
To make the list more readable, prefix "Don't" in front of every first
sentence in the items.
Also, the "Keep in mind" list is out of place and awkward, because it
was a very short "list" beneath two very long ones, and it seemed easy
to miss under the list of "don'ts," and it only had one item. So move
this item to the list of "do's" and phrase as "Remember..."
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While writing a commit-graph file, we store the full list of
commits in a flat list. We use this list for sorting and ensuring
we are closed under reachability.
The initial allocation assumed that (at most) one in four objects
is a commit. This is a dramatic over-count for many repos,
especially large ones. Since we grow the repo dynamically, reduce
this count by a factor of eight. We still set it to a minimum of
1024 before allocating.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`graph_verify()`, `graph_read()` and `graph_write()` do the hard work of
`cmd_commit_graph()`. As soon as these return, so does
`cmd_commit_graph()`.
`strbuf_getline()` may allocate memory in the strbuf, yet return EOF.
We need to release the strbuf or UNLEAK it. Go for the latter since we
are close to returning from `graph_write()`.
`graph_write()` also fails to free the strings in the string list. They
have been added to the list with `strdup_strings` set to 0. We could
flip `strdup_strings` before clearing the list, which is our usual hack
in situations like this. But since we are about to exit, let's just
UNLEAK the whole string list instead.
UNLEAK `graph` in `graph_verify`. While at it, and for consistency,
UNLEAK in `graph_read()` as well, and remove an unnecessary UNLEAK just
before dying.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method in commit-graph.c leaks some lits
and strings during execution. In addition, a list of strings is
leaked in write_commit_graph_reachable(). Clean these up so our
memory checking is cleaner.
Further, if we use a list of pack-files to find the commits, we
can leak the packed_git structs after scanning them for commits.
Running the following commands demonstrates the leak before and
the fix after:
* valgrind --leak-check=full ./git commit-graph write --reachable
* valgrind --leak-check=full ./git commit-graph write --stdin-packs
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple worktrees are used, we need rules to determine if
something belongs to one worktree or all of them. Instead of keeping
adding rules when new stuff comes (*), have a generic rule:
- Inside $GIT_DIR, which is per-worktree by default, add
$GIT_DIR/common which is always shared. New features that want to
share stuff should put stuff under this directory.
- Inside refs/, which is shared by default except refs/bisect, add
refs/worktree/ which is per-worktree. We may eventually move
refs/bisect to this new location and remove the exception in refs
code.
(*) And it may also include stuff from external commands which will
have no way to modify common/per-worktree rules.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple identical parents are detected for a commit being considered
for copying, explicitly check whether one is the common merge base between
the commits. If so, the other commit can be used as the identical parent;
if not, a merge must be performed to maintain history.
In some situations two parents of a merge commit may appear to both have
identical subtree content with each other and the current commit. However,
those parents can potentially come from different commit graphs.
Previous behavior would simply select one of the identical parents to
serve as the replacement for this commit, based on the order in which they
were processed.
New behavior compares the merge base between the commits to determine if
a new merge commit is necessary to maintain history despite the identical
content.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds recursive evaluation of parent commits which were not part of the
initial commit list when performing a split.
Split expects all relevant commits to be reachable from the target commit
but not reachable from any previous rejoins. However, a branch could be
based on a commit prior to a rejoin, then later merged back into the
current code. In this case, a parent to the commit will not be present in
the initial list of commits, trigging an "incorrect order" warning.
Previous behavior was to consider that commit to have no parent, creating
an original commit containing all subtree content. This commit is not
present in an existing subtree commit graph, changing commit hashes and
making pushing to a subtree repo impossible.
New behavior will recursively check these unexpected parent commits to
track them back to either an earlier rejoin, or a true original commit.
The generated synthetic commits will properly match previously-generated
commits, allowing successful pushing to a prior subtree repo.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes the behavior of --ignore-joins to always consider a subtree add
commit, and ignore only splits and squashes.
The --ignore-joins option is documented to ignore prior --rejoin commits.
However, it additionally ignored subtree add commits generated when a
subtree was initially added to a repo.
Due to the logic which determines whether a commit is a mainline commit
or a subtree commit (namely, the presence or absence of content in the
subtree prefix) this causes commits before the initial add to appear to
be part of the subtree. An --ignore-joins split would therefore consider
those commits part of the subtree history and include them at the
beginning of the synthetic history, causing the resulting hashes to be
incorrect for all later commits.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a particularly complex repo, subtree split was not creating
compatible splits for pushing back to a separate repo. Addressing
one of the issues requires recursive handling of parent commits
that were not initially considered by the algorithm. This commit
makes no functional changes, but relocates the code to be called
recursively into a new method to simply comparisons of later
commits.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't duplicate the indentation string if we're not going to use it.
This was found with asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adjusting the start of the string to take account of the change
in indentation the code was not checking that the string being
adjusted was in fact longer than the indentation change. This was
detected by asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running
git diff --color-moved-ws=allow-indentation-change v2.18.0 v2.19.0
results in a crash due to a double free. This happens when two
potential moved blocks start with consecutive lines. As
pmb_advance_or_null_multi_match() advances it copies the ws_delta from
the last matching line to the next. When the first of our consecutive
lines is advanced its ws_delta well be copied to the second,
overwriting the ws_delta of the block containing the second line. Then
when the second line is advanced it will copy the new ws_delta to the
line below it and so on. Eventually one of these blocks will stop
matching and the ws_delta will be freed. From then on the other block
is in a use-after-free state and when it stops matching it will try to
free the ws_delta that has already been freed by the other block.
The solution is to store the ws_delta in the array of potential moved
blocks rather than with the lines. This means that it no longer needs
to be copied around and one block cannot overwrite the ws_delta of
another. Additionally it saves some malloc/free calls as we don't keep
allocating and freeing ws_deltas.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9ac3f0e5b3 (pack-objects: fix performance issues on packing large
deltas, 2018-07-22), a mutex was introduced that is used to guard the
call to set the delta size. This commit even added code to initialize
it, but at an incorrect spot: in `init_threaded_search()`, while the
call to `oe_set_delta_size()` (and hence to `packing_data_lock()`) can
happen in the call chain `check_object()` <- `get_object_details()` <-
`prepare_pack()` <- `cmd_pack_objects()`, which is long before the
`prepare_pack()` function calls `ll_find_deltas()` (which initializes
the threaded search).
Another tell-tale that the mutex was initialized in an incorrect spot is
that the function to initialize it lives in builtin/, while the code
that uses the mutex is defined in a libgit.a header file.
Let's use a more appropriate function: `prepare_packing_data()`, which
not only lives in libgit.a, but *has* to be called before the
`packing_data` struct is used that contains that mutex.
This fixes https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a problem in the way 9ac3f0e5b3 (pack-objects: fix
performance issues on packing large deltas, 2018-07-22) initializes that
mutex in the `packing_data` struct. The problem manifests in a
segmentation fault on Windows, when a mutex (AKA critical section) is
accessed without being initialized. (With pthreads, you apparently do
not really have to initialize them?)
This was reported in https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This trick was performed by rebasing the builtin-stash-rebase-v2 branch
thicket via `git rebase -ki --rebase-merges=rebase-cousins v2.19.1`,
replacing all branches that made it into `pu` by their current versions
(and also the builtin-stash by the newest iteration as of ungps/git),
labeling the branch as `builtin-stash-rebase-v3` and then replacing it
in the `merge` command in the todo list.
We did have to rebase the "cousins" because the initial merge of a
merging-rebase will confuse the merge-base logic (and hence the changes
would be dropped when we try to merge them "again").
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows accepts pull requests; Core Git does not. Therefore we
need to adjust the template (because it only matches core Git's
project management style, not ours).
Also: direct Git for Windows enhancements to their contributions page,
space out the text for easy reading, and clarify that the mailing list
is plain text, not HTML.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Getting started contributing to Git can be difficult on a Windows
machine. CONTRIBUTING.md contains a guide to getting started, including
detailed steps for setting up build tools, running tests, and
submitting patches to upstream.
[includes an example by Pratik Karki how to submit v2, v3, v4, etc.]
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
It is better to state clearly expectations and intentions than to assume
quietly that everybody agrees.
This Code of Conduct is the Open Code of Conduct as per
http://todogroup.org/opencodeofconduct/ (the only modifications are the
adjustments to reflect that there is no "response team" in addition to the
Git for Windows maintainer, and the addition of the link to the Open Code
of Conduct itself).
[Completely revamped, based on the Covenant 1.4 by Brendan Forster]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Completely convert the pathname expoted in the %msvc_bin_dir_msys%
variable to MSYS format with forward slashes rather than a mixture
of forward and back slashes.
This solves an obscure problem observed by some developers:
[...]
http-push.c
CC remote-curl.o
remote-curl.c
* new script parameters
GEN git-instaweb
sed: -e expression #7, char 155: invalid reference \2 on `s' command's RHS
make: *** [Makefile:2023: git-instaweb] Error 1
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Add new condition to invoke vcpkg_install.bat: it's not enough to check
the presence of folder vcpkg. We need to check the presence of some
header files because this is one of the main goals of this script.
Previous build attempt could be aborted, so the folder will exist but
the project will not be built properly.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
