This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When a third-party tool periodically runs `git status` in order to keep
track of the state of the working tree, it is a bad idea to lock the
index: it might interfere with interactive commands executed by the
user, e.g. when the user wants to commit files.
Git for Windows introduced the `--no-lock-index` option a long time ago
to fix that (it made it into Git for Windows v2.9.2(3)) by simply
avoiding to write that file.
The downside is that the periodic `git status` calls will be a little
bit more wasteful because they may have to refresh the index repeatedly,
only to throw away the updates when it exits. This cannot really be
helped, though, as tools wanting to get a periodic update of the status
have no way to predict when the user may want to lock the index herself.
Sadly, a competing approach was submitted (by somebody who apparently
has less work on their plate than this maintainer) that made it into
v2.15.0 but is *different*: instead of a `git status`-only option, it is
an option that comes *before* the Git command and is called differently,
too.
Let's give previous users a chance to upgrade to newer Git for Windows
versions by handling the `--no-lock-index` option, still, though with a
big fat warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there is no (single) `/etc/` directory. To address that, in
conjunction with the libgit2 project, Git for Windows introduced yet
another level of system-wide config files, located in C:\ProgramData
(and the equivalent on Windows XP).
Let's spell this out in the documentation.
This closes https://github.com/git-for-windows/git/pull/470 (because
there was no reaction in three months in that Pull Request).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
On XP, there is no %PROGRAMDATA%, therefore we need to use
"%ALLUSERSPROFILE%\Application Data\Git\config" in those setups.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since commit 0c499ea60f the send-pack builtin uses the side-band-64k
capability if advertised by the server.
Unfortunately this breaks pushing over the dump git protocol if used
over a network connection.
The detailed reasons for this breakage are (by courtesy of Jeff Preshing,
quoted from ttps://groups.google.com/d/msg/msysgit/at8D7J-h7mw/eaLujILGUWoJ):
----------------------------------------------------------------------------
MinGW wraps Windows sockets in CRT file descriptors in order to mimic the
functionality of POSIX sockets. This causes msvcrt.dll to treat sockets as
Installable File System (IFS) handles, calling ReadFile, WriteFile,
DuplicateHandle and CloseHandle on them. This approach works well in simple
cases on recent versions of Windows, but does not support all usage patterns.
In particular, using this approach, any attempt to read & write concurrently
on the same socket (from one or more processes) will deadlock in a scenario
where the read waits for a response from the server which is only invoked after
the write. This is what send_pack currently attempts to do in the use_sideband
codepath.
----------------------------------------------------------------------------
The new config option "sendpack.sideband" allows to override the side-band-64k
capability of the server, and thus makes the dump git protocol work.
Other transportation methods like ssh and http/https still benefit from
the sideband channel, therefore the default value of "sendpack.sideband"
is still true.
Signed-off-by: Thomas Braun <thomas.braun@byte-physics.de>
A '+' is not a valid part of a filename with Windows file systems (it is
reserved because the '+' operator meant file concatenation back in the
DOS days).
Let's just not use it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Git for Windows ships with its own Perl interpreter, and insists on
using it, so it will most likely wreak havoc if PERL5LIB is set before
launching Git.
Let's just unset that environment variables when spawning processes.
To make this feature extensible (and overrideable), there is a new
config setting `core.unsetenvvars` that allows specifying a
comma-separated list of names to unset before spawning processes.
Reported by Gabriel Fuhrmann.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Doc update around use of "format-patch --subject-prefix" etc.
* ad/submitting-patches-title-decoration:
doc/SubmittingPatches: correct subject guidance
MinGW updates.
* js/mingw-redirect-std-handles:
mingw: document the standard handle redirection
mingw: optionally redirect stderr/stdout via the same handle
mingw: add experimental feature to redirect standard handles
Description of blame.{showroot,blankboundary,showemail,date}
configuration variables have been added to "git config --help".
* sb/blame-config-doc:
config: document blame configuration
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
The examples and common practice for adding markers such as "RFC" or
"v2" to the subject of patch emails is to have them within the same
brackets as the "PATCH" text, not after the closing bracket. Further,
the practice of `git format-patch` and the like, as well as what appears
to be the more common pratice on the mailing list, is to use "[RFC
PATCH]", not "[PATCH/RFC]".
Update the SubmittingPatches article to match and to reference the
`format-patch` helper arguments, and also make some minor text
clarifications in the area.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options are currently only referenced by the git-blame man page,
also explain them in git-config, which is the canonical page to
contain all config options.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This heuristic has been the default since 2.14 so we should not confuse our
users by saying that it's experimental and off by default.
Signed-off-by: Carlos Martín Nieto <cmn@dwim.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feature has been in Git for Windows since v2.11.0(2), as an
experimental option. Now it is considered mature, and it is high time to
document it properly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The descriptions of the options '--parents', '--children' and
'--graph' say "see 'History Simplification' below", although the
referred section is in fact above the description of these options.
Send readers in the right direction by saying "above" instead of
"below".
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch <there> <src>:<dst>" allows an object name on the <src>
side when the other side accepts such a request since Git v2.5, but
the documentation was left stale.
* jc/fetch-refspec-doc-update:
fetch doc: src side of refspec could be full SHA-1
Update the documentation for "git filter-branch" so that the filter
options are listed in the same order as they are applied, as
described in an earlier part of the doc.
* dg/filter-branch-filter-order-doc:
doc: list filter-branch subdirectory-filter first
"git fetch <there> <src>:<dst>" allows an object name on the <src>
side when the other side accepts such a request since Git v2.5, but
the documentation was left stale.
* jc/fetch-refspec-doc-update:
fetch doc: src side of refspec could be full SHA-1
Change the word "bla" to "section.variable"; "bla" is a placeholder
for a variable name but it wasn't clear for everyone.
While we're here, also reformat this sample command line to use
monospace instead of italics, to better match the rest of the file.
Use a space instead of a dash in "git config", as is common in the
rest of Git's documentation.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: MOY Matthieu <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Daniel Bensoussan <daniel.bensoussan--bohm@etu.univ-lyon1.fr>
Signed-off-by: Timothee Albertin <timothee.albertin@etu.univ-lyon1.fr>
Signed-off-by: Nathan Payre <nathan.payre@etu.univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
