The test coverage was missing a test for the failure branch of remote
set-head auto's output. Add the missing text and while we are at it,
correct a small grammatical mistake in the error's output ("setup" is
the noun, "set up" is the verb).
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider the bare repository called "mirror" in the test. Running `git
remote add --mirror -f origin ../one` will not change HEAD, consequently
if init.defaultBranch is not the same as what HEAD in the remote
("one"), HEAD in "mirror" will be pointing to a non-existent reference.
Hence if "mirror" is used as a remote by yet another repository,
ls-remote will not show HEAD. On the other hand, if init.defaultBranch
happens to match HEAD in "one", then ls-remote will show HEAD.
Since the "ci/run-build-and-tests.sh" script globally exports
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for some (but not all) jobs,
there may be a drift in some tests between how the test repositories are
set up in the CI and during local testing, if the test itself uses
"master" as default instead of "main". In particular, this happens in
t5505-remote.sh. This issue does not manifest currently, as the test
does not do any remote HEAD manipulation where this would come up, but
should such things be added, a locally passing test would break the CI
and vice-versa.
Set GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main in t5505-remote to be
consistent with the CI.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git --git-dir=nowhere cmd" failed to properly notice that it
wasn't in any repository while processing includeIf.onbranch
configuration and instead crashed.
* ps/includeif-onbranch-cornercase-fix:
config: fix evaluating "onbranch" with nonexistent git dir
t1305: exercise edge cases of "onbranch" includes
Background tasks "git maintenance" runs may need to use credential
information when going over the network, but a credential helper
may work only in an interactive environment, and end up blocking a
scheduled task waiting for UI. Credential helpers can now behave
differently when they are not running interactively.
* ds/background-maintenance-with-credential:
scalar: configure maintenance during 'reconfigure'
maintenance: add custom config to background jobs
credential: add new interactive config option
"git archive" with pathspec magic that uses the attribute
information did not work well, which has been corrected.
* rs/archive-with-attr-pathspec-fix:
archive: load index before pathspec checks
When a subprocess to work in a submodule spawned by "git submodule"
fails with SIGPIPE, the parent Git process caught the death of it,
but gave a generic "failed to work in that submodule", which was
misleading. We now behave as if the parent got SIGPIPE and die.
* pw/submodule-process-sigpipe:
submodule status: propagate SIGPIPE
Give timeout to the locking code to write to reftable.
* ps/reftable-concurrent-writes:
refs/reftable: reload locked stack when preparing transaction
reftable/stack: allow locking of outdated stacks
refs/reftable: introduce "reftable.lockTimeout"
"git diff --exit-code" ignored modified binary files, which has
been corrected.
* rs/diff-exit-code-binary:
diff: report modified binary files as changes in builtin_diff()
The reftable backend learned to more efficiently handle exclude
patterns while enumerating the refs.
* ps/reftable-exclude:
refs/reftable: wire up support for exclude patterns
reftable/reader: make table iterator reseekable
t/unit-tests: introduce reftable library
Makefile: stop listing test library objects twice
builtin/receive-pack: fix exclude patterns when announcing refs
refs: properly apply exclude patterns to namespaced refs
"git apply" had custom buffer management code that predated before
use of strbuf got widespread, which has been updated to use strbuf,
which also plugged some memory leaks.
* ps/apply-leakfix:
apply: refactor `struct image` to use a `struct strbuf`
apply: rename members that track line count and allocation length
apply: refactor code to drop `line_allocated`
apply: introduce macro and function to init images
apply: rename functions operating on `struct image`
apply: reorder functions to move image-related things together
When starting a reftable transaction we lock all stacks we are about to
modify. While it may happen that the stack is out-of-date at this point
in time we don't really care: transactional updates encode the expected
state of a certain reference, so all that we really want to verify is
that the _current_ value matches that expected state.
Pass `REFTABLE_STACK_NEW_ADDITION_RELOAD` when locking the stack such
that an out-of-date stack will be reloaded after having been locked.
This change is safe because all verifications of the expected state
happen after this step anyway.
Add a testcase that verifies that many writers are now able to write to
the stack concurrently without failures and with a deterministic end
result.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `reftable_stack_new_addition()` we first lock the stack and then
check whether it is still up-to-date. If it is not we return an error to
the caller indicating that the stack is outdated.
This is overly restrictive in our ref transaction interface though: we
lock the stack right before we start to verify the transaction, so we do
not really care whether it is outdated or not. What we really want is
that the stack is up-to-date after it has been locked so that we can
verify queued updates against its current state while we know that it is
locked for concurrent modification.
Introduce a new flag `REFTABLE_STACK_NEW_ADDITION_RELOAD` that alters
the behaviour of `reftable_stack_init_addition()` in this case: when we
notice that it is out-of-date we reload it instead of returning an error
to the caller.
This logic will be wired up in the reftable backend in the next commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple concurrent processes try to update references in a
repository they may try to lock the same lockfiles. This can happen even
when the updates are non-conflicting and can both be applied, so it
doesn't always make sense to abort the transaction immediately. Both the
"loose" and "packed" backends thus have a grace period that they wait
for the lock to be released that can be controlled via the config values
"core.filesRefLockTimeout" and "core.packedRefsTimeout", respectively.
The reftable backend doesn't have such a setting yet and instead fails
immediately when it sees such a lock. But the exact same concepts apply
here as they do apply to the other backends.
Introduce a new "reftable.lockTimeout" config that controls how long we
may wait for a "tables.list" lock to be released. The default value of
this config is 100ms, which is the same default as we have it for the
"loose" backend.
Note that even though we also lock individual tables, this config really
only applies to the "tables.list" file. This is because individual
tables are only ever locked when we already hold the "tables.list" lock
during compaction. When we observe such a lock we in fact do not want to
compact the table at all because it is already in the process of being
compacted by a concurrent process. So applying the same timeout here
would not make any sense and only delay progress.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `include_by_branch()` function is responsible for evaluating whether
or not a specific include should be pulled in based on the currently
checked out branch. Naturally, his condition can only be evaluated when
we have a properly initialized repository with a ref store in the first
place. This is why the function guards against the case when either
`data->repo` or `data->repo->gitdir` are `NULL` pointers.
But the second check is insufficient: the `gitdir` may be set even
though the repository has not been initialized. Quoting "setup.c":
NEEDSWORK: currently we allow bogus GIT_DIR values to be set in some
code paths so we also need to explicitly setup the environment if the
user has set GIT_DIR. It may be beneficial to disallow bogus GIT_DIR
values at some point in the future.
So when either the GIT_DIR environment variable or the `--git-dir`
global option are set by the user then `the_repository` may end up with
an initialized `gitdir` variable. And this happens even when the dir is
invalid, like for example when it doesn't exist. It follows that only
checking for whether or not `gitdir` is `NULL` is not sufficient for us
to determine whether the repository has been properly initialized.
This issue can lead to us triggering a BUG: when using a config with an
"includeIf.onbranch:" condition outside of a repository while using the
`--git-dir` option pointing to an invalid Git directory we may end up
trying to evaluate the condition even though the ref storage format has
not been set up.
This bisects to 173761e21b (setup: start tracking ref storage format,
2023-12-29), but that commit really only starts to surface the issue
that has already existed beforehand. The code to check for `gitdir` was
introduced via 85fe0e800c (config: work around bug with
includeif:onbranch and early config, 2019-07-31), which tried to fix
similar issues when we didn't yet have a repository set up. But the fix
was incomplete as it missed the described scenario.
As the quoted comment mentions, we'd ideally refactor the code to not
set up `gitdir` with an invalid value in the first place, but that may
be a bigger undertaking. Instead, refactor the code to use the ref
storage format as an indicator of whether or not the ref store has been
set up to fix the bug.
Reported-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a couple more tests for "onbranch" includes for several edge cases.
All tests except for the last one pass, so for the most part this change
really only aims to nail down behaviour of include conditionals further.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote-helper dies before Git writes to it, SIGPIPE killed
Git silently. We now explain the situation a bit better to the end
user in our error message.
* jk/diag-unexpected-remote-helper-death:
print an error when remote helpers die during capabilities
Code clean-up.
* ps/environ-wo-the-repository: (21 commits)
environment: stop storing "core.notesRef" globally
environment: stop storing "core.warnAmbiguousRefs" globally
environment: stop storing "core.preferSymlinkRefs" globally
environment: stop storing "core.logAllRefUpdates" globally
refs: stop modifying global `log_all_ref_updates` variable
branch: stop modifying `log_all_ref_updates` variable
repo-settings: track defaults close to `struct repo_settings`
repo-settings: split out declarations into a standalone header
environment: guard state depending on a repository
environment: reorder header to split out `the_repository`-free section
environment: move `set_git_dir()` and related into setup layer
environment: make `get_git_namespace()` self-contained
environment: move object database functions into object layer
config: make dependency on repo in `read_early_config()` explicit
config: document `read_early_config()` and `read_very_early_config()`
environment: make `get_git_work_tree()` accept a repository
environment: make `get_graft_file()` accept a repository
environment: make `get_index_file()` accept a repository
environment: make `get_object_directory()` accept a repository
environment: make `get_git_common_dir()` accept a repository
...
git archive checks whether pathspec arguments match anything to avoid
surprises due to typos and later loads the index to get attributes.
This order was OK when these features were introduced by ba053ea96c
(archive: do not read .gitattributes in working directory, 2009-04-18)
and d5f53d6d6f (archive: complain about path specs that don't match
anything, 2009-12-12).
But when attribute matching was added to pathspec in b0db704652
(pathspec: allow querying for attributes, 2017-03-13), the pathspec
checker in git archive did not support it fully, because it lacks the
attributes from the index.
Load the index earlier, before the pathspec check, to support attr
pathspecs.
Reported-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff machinery has two ways to detect changes to set the exit code:
Just comparing hashes and comparing blob contents. The latter is needed
if certain changes have to be ignored, e.g. with --ignore-space-change
or --ignore-matching-lines. It's enabled by the diff_options flag
diff_from_contents.
The code for handling binary files added by 1aaf69e669 (diff: shortcut
for diff'ing two binary SHA-1 objects, 2014-08-16) always uses a quick
hash-only comparison, even if the slow way is taken. We need it to
report a hash difference as a change for the purpose of setting the
exit code, though, but it never did. Fix that.
d7b97b7185 (diff: let external diffs report that changes are
uninteresting, 2024-06-09) set diff_from_contents if external diff
programs are allowed. This is the default e.g. for git diff, and so
that change exposed the inconsistency much more widely.
Reported-by: Kohei Shibata <shiba200712@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'scalar reconfigure' command is intended to update registered repos
with the latest settings available. However, up to now we were not
reregistering the repos with background maintenance.
In particular, this meant that the background maintenance schedule would
not be updated if there are improvements between versions.
Be sure to register repos for maintenance during the reconfigure step.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the moment, some background jobs are getting blocked on credentials
during the 'prefetch' task. This leads to other tasks, such as
incremental repacks, getting blocked. Further, if a user manages to fix
their credentials, then they still need to cancel the background process
before their background maintenance can continue working.
Update the background schedules for our four scheduler integrations to
include these config options via '-c' options:
* 'credential.interactive=false' will stop Git and some credential
helpers from prompting in the UI (assuming the '-c' parameters are
carried through and respected by GCM).
* 'core.askPass=true' will replace the text fallback for a username
and password into the 'true' command, which will return a success in
its exit code, but Git will treat the empty string returned as an
invalid password and move on.
We can do some testing that the credentials are passed, at least in the
systemd case due to writing the service files.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When scripts or background maintenance wish to perform HTTP(S) requests,
there is a risk that our stored credentials might be invalid. At the
moment, this causes the credential helper to ping the user and block the
process. Even if the credential helper does not ping the user, Git falls
back to the 'askpass' method, which includes a direct ping to the user
via the terminal.
Even setting the 'core.askPass' config as something like 'echo' will
causes Git to fallback to a terminal prompt. It uses
git_terminal_prompt(), which finds the terminal from the environment and
ignores whether stdin has been redirected. This can also block the
process awaiting input.
Create a new config option to prevent user interaction, favoring a
failure to a blocked process.
The chosen name, 'credential.interactive', is taken from the config
option used by Git Credential Manager to already avoid user
interactivity, so there is already one credential helper that integrates
with this option. However, older versions of Git Credential Manager also
accepted other string values, including 'auto', 'never', and 'always'.
The modern use is to use a boolean value, but we should still be
careful that some users could have these non-booleans. Further, we
should respect 'never' the same as 'false'. This is respected by the
implementation and test, but not mentioned in the documentation.
The implementation for the Git interactions takes place within
credential_getpass(). The method prototype is modified to return an
'int' instead of 'void'. This allows us to detect that no attempt was
made to fill the given credential, changing the single caller slightly.
Also, a new trace2 region is added around the interactive portion of the
credential request. This provides a way to measure the amount of time
spent in that region for commands that _are_ interactive. It also makes
a conventient way to test that the config option works with
'test_region'.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been reported than running
git submodule status --recurse | grep -q ^+
results in an unexpected error message
fatal: failed to recurse into submodule $submodule
When "git submodule--helper" recurses into a submodule it creates a
child process. If that process fails then the error message above is
displayed by the parent. In the case above the child is killed by
SIGPIPE as "grep -q" exits as soon as it sees the first match. Fix this
by propagating SIGPIPE so that it is visible to the process running
git. We could propagate other signals but I'm not sure there is much
value in doing that. In the common case of the user pressing Ctrl-C or
Ctrl-\ then SIGINT or SIGQUIT will be sent to the foreground process
group and so the parent process will receive the same signal as the
child.
Reported-by: Matt Liberty <mliberty@precisioninno.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git 2.39, Git.pm stopped working in a bare repository, which has
been corrected.
* jk/git-pm-bare-repo-fix:
Git.pm: use "rev-parse --absolute-git-dir" rather than perl code
Git.pm: fix bare repository search with Directory option
The support to customize build options to adjust for older versions
and/or older systems for the interop tests has been improved.
* jk/interop-test-build-options:
t/interop: allow per-version make options
"git rebase --autostash" failed to resurrect the autostashed
changes when the command gets aborted after giving back control
asking for hlep in conflict resolution.
* pw/rebase-autostash-fix:
rebase: apply and cleanup autostash when rebase fails to start
The error messages from the test script checker have been improved.
* es/chainlint-message-updates:
chainlint: reduce annotation noise-factor
chainlint: make error messages self-explanatory
chainlint: don't be fooled by "?!...?!" in test body
Import clar unit tests framework libgit2 folks invented for our
use.
* ps/clar-unit-test:
Makefile: rename clar-related variables to avoid confusion
clar: add CMake support
t/unit-tests: convert ctype tests to use clar
t/unit-tests: convert strvec tests to use clar
t/unit-tests: implement test driver
Makefile: wire up the clar unit testing framework
Makefile: do not use sparse on third-party sources
Makefile: make hdr-check depend on generated headers
Makefile: fix sparse dependency on GENERATED_H
clar: stop including `shellapi.h` unnecessarily
clar(win32): avoid compile error due to unused `fs_copy()`
clar: avoid compile error with mingw-w64
t/clar: fix compatibility with NonStop
t: import the clar unit testing framework
t: do not pass GIT_TEST_OPTS to unit tests with prove
The `struct image` uses a character array to track the pre- or postimage
of a patch operation. This has multiple downsides:
- It is somewhat hard to track memory ownership. In fact, we have
several memory leaks in git-apply(1) because we do not (and cannot
easily) free the buffer in all situations.
- We have to reinvent the wheel and manually implement a lot of
functionality that would already be provided by `struct strbuf`.
- We have to carefully track whether `update_pre_post_images()` can do
an in-place update of the postimage or whether it has to allocate a
new buffer for it.
This is all rather cumbersome, and especially `update_pre_post_images()`
is really hard to understand as a consequence even though what it is
doing is rather trivial.
Refactor the code to use a `struct strbuf` instead, addressing all of
the above. Like this we can easily perform in-place updates in all
situations, the logic to perform those updates becomes way simpler and
the lifetime of the buffer becomes a ton easier to track.
This refactoring also plugs some leaking buffers as a side effect.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bugfixes and leak plugging in "git for-each-ref --format=..." code
paths.
* jk/ref-filter-trailer-fixes:
ref-filter: fix leak with unterminated %(if) atoms
ref-filter: add ref_format_clear() function
ref-filter: fix leak when formatting %(push:remoteref)
ref-filter: fix leak with %(describe) arguments
ref-filter: fix leak of %(trailers) "argbuf"
ref-filter: store ref_trailer_buf data per-atom
ref-filter: drop useless cast in trailers_atom_parser()
ref-filter: strip signature when parsing tag trailers
ref-filter: avoid extra copies of payload/signature
t6300: drop newline from wrapped test title
Another reftable test migrated to the unit-test framework.
* cp/unit-test-reftable-stack:
t-reftable-stack: add test for stack iterators
t-reftable-stack: add test for non-default compaction factor
t-reftable-stack: use reftable_ref_record_equal() to compare ref records
t-reftable-stack: use Git's tempfile API instead of mkstemp()
t: harmonize t-reftable-stack.c with coding guidelines
t: move reftable/stack_test.c to the unit testing framework
Exclude patterns can be used by reference backends to skip over blocks
of references that are uninteresting to the caller. Reference backends
do not have to wire up support for them, and all callers are expected to
behave as if the backend didn't support them. In fact, the only backend
that supports exclude patterns right now is the "packed" backend.
Exclude patterns can be quite an important performance optimization in
repositories that have loads of references. The patterns are set up in
case "transfer.hideRefs" and friends are configured during a fetch, so
handling these patterns becomes important once there are lots of hidden
refs in a served repository.
Now that we have properly re-seekable reftable iterators we can also
wire up support for these patterns in the "reftable" backend. Doing so
is conceptually simple: once we hit a reference whose prefix matches the
current exclude pattern we re-seek the iterator to the first reference
that doesn't match the pattern anymore. This schema only works for
trivial patterns that do not have any globbing characters in them, but
this restriction also applies do the "packed" backend.
This makes t1419 work with the "reftable" backend with some slight
modifications. Of course it also speeds up listing of references with
hidden refs. The following benchmark prints one reference with 1 million
hidden references:
Benchmark 1: HEAD~
Time (mean ± σ): 93.3 ms ± 2.1 ms [User: 90.3 ms, System: 2.5 ms]
Range (min … max): 89.8 ms … 97.2 ms 33 runs
Benchmark 2: HEAD
Time (mean ± σ): 4.2 ms ± 0.6 ms [User: 2.2 ms, System: 1.8 ms]
Range (min … max): 3.1 ms … 8.1 ms 765 runs
Summary
HEAD ran
22.15 ± 3.19 times faster than HEAD~
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 67ce50ba26 (Merge branch 'ps/reftable-reusable-iterator', 2024-05-30)
we have refactored the interface of reftable iterators such that they
can be reused in theory. This patch series only landed the required
changes on the interface level, but didn't yet implement the actual
logic to make iterators reusable.
As it turns out almost all of the infrastructure already does support
re-seeking. The only exception is the table iterator, which does not
reset its `is_finished` bit. Do so and add a couple of tests that verify
that we can re-seek iterators.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have recently migrated all of the reftable unit tests that were part
of the reftable library into our own unit testing framework. As part of
that migration we have duplicated some of the functionality that was
part of the reftable test framework into each of the migrated test
suites. This was a sensible decision to not have all of the migrations
dependent on each other, but now that the migration is done it makes
sense to deduplicate the functionality again.
Introduce a new reftable test library that hosts some shared code and
adapt tests to use it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `write_head_info()` we announce references to the remote client. We
need to honor "transfer.hideRefs" here so that we do not announce any
references that the client shouldn't be able to learn about. This is
done via two separate mechanisms:
- We hand over exclude patterns to the reference backend. We can only
honor "plain" exclude patterns here that do not have prefixes with
special meaning such as "^" or "!". Filtering down the references is
handled by `hidden_refs_to_excludes()`.
- In `show_ref_cb()` we perform a second check against hidden refs.
For one this is done such that we can handle those special prefixes.
And second, handling exclude patterns in ref backends is optional,
so we also have to handle "normal" patterns.
The special-meaning "^" prefix alters whether a hidden ref applies to
the namespace-stripped reference name or the full name. So while we
would usually call `refs_for_each_namespaced_ref()` to only get those
references in the current namespace, we can't because we'd get the
already-rewritten reference names. Instead, we are forced to use
`refs_for_each_fullref_in()` and then manually strip away the namespace
prefix such that we have access to both names.
But this also means that we do not get namespace handling for exclude
patterns, which `refs_for_each_namespaced_ref()` brings for free. This
results in a bug because we potentially end up hiding away references
based on their namespaced name and not on the stripped name as we really
should be doing.
Fix this by manually rewriting the exclude patterns to their namespaced
variants.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reference namespaces allow commands like git-upload-pack(1) to serve
different sets of references to the client depending on which namespace
is enabled, which is for example useful in fork networks. Namespaced
refs are stored with a `refs/namespaces/$namespace` prefix, but all the
user will ultimately see is a stripped version where that prefix is
removed.
The way that this interacts with "transfer.hideRefs" is not immediately
obvious: the hidden refs can either apply to the stripped references, or
to the non-stripped ones that still have the namespace prefix. In fact,
the "transfer.hideRefs" machinery does the former and applies to the
stripped reference by default, but rules can have "^" prefixed to switch
this behaviour to instead match against the full reference name.
Namespaces are exclusively handled at the generic "refs" layer, the
respective backends have no clue that such a thing even exists. This
also has the consequence that they cannot handle hiding references as
soon as reference namespaces come into play because they neither know
whether a namespace is active, nor do they know how to strip references
if they are active.
Handling such exclude patterns in `refs_for_each_namespaced_ref()` and
`refs_for_each_fullref_in_prefixes()` is broken though, as both support
that the user passes both namespaces and exclude patterns. In the case
where both are set we will exclude references with unstripped names,
even though we really wanted to exclude references based on their
stripped names.
This only surfaces when:
- A repository uses reference namespaces.
- "transfer.hideRefs" is active.
- The namespaced references are packed into the "packed-refs" file.
None of our tests exercise this scenario, and thus we haven't ever hit
it. While t5509 exercises both (1) and (2), it does not happen to hit
(3). It is trivial to demonstrate the bug though by explicitly packing
refs in the tests, and then we indeed surface the breakage.
Fix this bug by prefixing exclude patterns with the namespace in the
generic layer. The newly introduced function will be used outside of
"refs.c" in the next patch, so we add a declaration to "refs.h".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test "cc list is sanitized", we feed a commit with a variety of
trailers to send-email, and then check its output to see how it handled
them. For most of them, we are grepping for a specific mention of the
header, but there's a "BugID" header which we expect to be ignored. We
confirm this by grepping for "12345", the fake BugID, and making sure it
is not present.
But we can be fooled by false positives! I just tracked down a flaky
test failure here that was caused by matching this unrelated line in the
output:
<20240914090449.612345-1-author@example.com>
which will change from run to run based on the time, pid, etc.
Ideally we'd tighten the regex to make this more specifically, but since
the point is that it _shouldn't_ be mentioned, it's hard to say what the
right match would be (e.g., would there be a leading space?).
Instead, let's just choose a match that is much less likely to appear.
The actual content of the header isn't important, since it's supposed to
be ignored.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transport-helper code generally relies on the
remote-helper to provide an informative message to the user
when it encounters an error. In the rare cases where the
helper does not do so, the output can be quite confusing.
E.g.:
$ git clone https://example.com/foo.git
Cloning into 'foo'...
$ echo $?
128
$ ls foo
/bin/ls: cannot access foo: No such file or directory
We tried to address this with 81d340d (transport-helper:
report errors properly, 2013-04-10).
But that makes the common case much more confusing. The
remote helper protocol's method for signaling normal errors
is to simply hang up. So when the helper does encounter a
routine error and prints something to stderr, the extra
error message is redundant and misleading. So we dropped it
again in 266f1fd (transport-helper: be quiet on read errors
from helpers, 2013-06-21).
This puts the uncommon case right back where it started. We
may be able to do a little better, though. It is common for
the helper to die during a "real" command, like fetching the
list of remote refs. It is not common for it to die during
the initial "capabilities" negotiation, right after we
start. Reporting failure here is likely to catch fundamental
problems that prevent the helper from running (and reporting
errors) at all. Anything after that is the responsibility of
the helper itself to report.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret-trailers command failed to recognise the end of the
message when the commit log ends in an incomplete line.
* bl/trailers-and-incomplete-last-line-fix:
interpret-trailers: handle message without trailing newline
In a few corner cases "git diff --exit-code" failed to report
"changes" (e.g., renamed without any content change), which has
been corrected.
* rs/diff-exit-code-fix:
diff: report dirty submodules as changes in builtin_diff()
diff: report copies and renames as changes in run_diff_cmd()
"git verify-pack" and "git index-pack" started dying outside a
repository, which has been corrected.
* ps/index-pack-outside-repo-fix:
builtin/index-pack: fix segfaults when running outside of a repo
