In previous commits, we started passing either repository or
git_hash_algo pointers around to various spots within builtin/repack.c
to reduce our dependency on the_repository in the hope of undef'ing
USE_THE_REPOSITORY_VARIABLE.
This commit takes us as far as we can (easily) go in that direction by
removing the only use of a convenience function that only exists when
USE_THE_REPOSITORY_VARIABLE is defined.
Unfortunately, the only other such function is "is_bare_repository()",
which is less than straightforward to convert into, say,
"repo_is_bare()", the latter of the two accepting a repository pointer.
Punt on that for now, and declare this commit as the stopping point for
our efforts in the direction of undef'ing USE_THE_REPOSITORY_VARIABLE.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, avoid referring directly to
"the_hash_algo" in builtin/repack.c::finish_pack_objects_cmd() and
instead accept one as a parameter to the function.
Since this function has a number of callers throughout the builtin, the
diff is a little noisier than previous commits. However, each hunk is
limited to passing the hash_algo parameter from a repository pointer
that is already in scope.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as the previous commits, avoid referring directly to
"the_hash_algo" within builtin/repack.c::repack_promisor_objects().
Since there is already a repository pointer in scope, use its hash_algo
value instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as the previous commit, avoid referring directly to
"the_hash_algo" within builtin/repack.c::write_oid().
Unlike the previous commit, we are within a callback function, so must
introduce a new struct to pass additional data through its "data"
pointer.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "mark_packs_for_deletion_1" function uses "the_hash_algo->hexsz" to
isolate a pack's checksum before deleting it to avoid deleting a newly
written pack having the same checksum (that is, some generated pack
wound up identical to an existing pack).
Avoid this by passing down a "struct git_hash_algo" pointer, and refer to
the hash algorithm through it instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass a "struct repository" pointer to the 'repack_promisor_objects()'
function to avoid using "the_repository".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'remove_redundant_pack()' function uses "the_repository" to obtain,
and optionally remove, the repository's MIDX. Instead of relying on
"the_repository", pass around a "struct repository *" parameter through
its callers, and use that instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid using "the_repository" in various MIDX-related ref snapshotting
functions.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a number of spots within builtin/repack.c which refer to
"the_repository", and either make use of the "existing packs" API
or otherwise have a 'struct existing_packs *' in scope.
Add a "repo" member to "struct existing_packs" and use that instead of
"the_repository" in such locations.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce builtin/repack.c's reliance on `the_repository` by using the
currently-UNUSED "repo" parameter within cmd_repack().
The following commits will continue to reduce the usage of
the_repository in other places within builtin/repack.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/packfile-store:
packfile: refactor `get_packed_git_mru()` to work on packfile store
packfile: refactor `get_all_packs()` to work on packfile store
packfile: refactor `get_packed_git()` to work on packfile store
packfile: move `get_multi_pack_index()` into "midx.c"
packfile: introduce function to load and add packfiles
packfile: refactor `install_packed_git()` to work on packfile store
packfile: split up responsibilities of `reprepare_packed_git()`
packfile: refactor `prepare_packed_git()` to work on packfile store
packfile: reorder functions to avoid function declaration
odb: move kept cache into `struct packfile_store`
odb: move MRU list of packfiles into `struct packfile_store`
odb: move packfile map into `struct packfile_store`
odb: move initialization bit into `struct packfile_store`
odb: move list of packfiles into `struct packfile_store`
packfile: introduce a new `struct packfile_store`
The `get_packed_git_mru()` function prepares the packfile store and then
returns its packfiles in most-recently-used order. Refactor it to accept
a packfile store instead of a repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `get_all_packs()` function prepares the packfile store and then
returns its packfiles. Refactor it to accept a packfile store instead of
a repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `get_packed_git()` function prepares the packfile store and then
returns its packfiles. Refactor it to accept a packfile store instead of
a repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a recurring pattern where we essentially perform an upsert of a
packfile in case it isn't yet known by the packfile store. The logic to
do so is non-trivial as we have to reconstruct the packfile's key, check
the map of packfiles, then create the new packfile and finally add it to
the store.
Introduce a new function that does this dance for us. Refactor callsites
to use it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `install_packed_git()` functions adds a packfile to a specific
object store. Refactor it to accept a packfile store instead of a
repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `reprepare_packed_git()` we perform a couple of operations:
- We reload alternate object directories.
- We clear the loose object cache.
- We reprepare packfiles.
While the logic is hosted in "packfile.c", it clearly reaches into other
subsystems that aren't related to packfiles.
Split up the responsibility and introduce `odb_reprepare()` which now
becomes responsible for repreparing the whole object database. The
existing `reprepare_packed_git()` function is refactored accordingly and
only cares about reloading the packfile store now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some among "git add -p" and friends ignored color.diff and/or
color.ui configuration variables, which is an old regression, which
has been corrected.
* jk/add-i-color:
contrib/diff-highlight: mention interactive.diffFilter
add-interactive: manually fall back color config to color.ui
add-interactive: respect color.diff for diff coloring
stash: pass --no-color to diff plumbing child processes
"git range-diff" learned a way to limit the memory consumed by
O(N*N) cost matrix.
* pc/range-diff-memory-limit:
range-diff: add configurable memory limit for cost matrix
"core.commentChar=auto" that attempts to dynamically pick a
suitable comment character is non-workable, as it is too much
trouble to support for little benefit, and is marked as deprecated.
* pw/3.0-commentchar-auto-deprecation:
commit: print advice when core.commentString=auto
config: warn on core.commentString=auto
breaking-changes: deprecate support for core.commentString=auto
"repo info" learns a short-hand option "-z" that is the same as
"--format=nul", and learns to report the objects format used in the
repository.
* lo/repo-info-step-2:
repo: add the field objects.format
repo: add the flag -z as an alias for --format=nul
The bulk-checkin code used to depend on a file-scope static
singleton variable, which has been updated to pass an instance
throughout the callchain.
* jt/de-global-bulk-checkin:
bulk-checkin: use repository variable from transaction
bulk-checkin: require transaction for index_blob_bulk_checkin()
bulk-checkin: remove global transaction state
bulk-checkin: introduce object database transaction structure
Instead of scanning for the remaining items to see if there are
still commits to be explored in the queue, use khash to remember
which items are still on the queue (an unacceptable alternative is
to reserve one object flag bits).
* rs/describe-with-lazy-queue-and-oidset:
describe: use oidset in finish_depth_computation()
"git refs exists" that works like "git show-ref --exists" has been
added.
* ms/refs-exists:
t: add test for git refs exists subcommand
t1422: refactor tests to be shareable
t1403: split 'show-ref --exists' tests into a separate file
builtin/refs: add 'exists' subcommand
Further code clean-up for multi-pack-index code paths.
* ps/object-store-midx-dedup-info:
midx: compute paths via their source
midx: stop duplicating info redundant with its owning source
midx: write multi-pack indices via their source
midx: load multi-pack indices via their source
midx: drop redundant `struct repository` parameter
odb: simplify calling `link_alt_odb_entry()`
odb: return newly created in-memory sources
odb: consistently use "dir" to refer to alternate's directory
odb: allow `odb_find_source()` to fail
odb: store locality in object database sources
get_oid_with_context() allows specifying flags and reports object
details via a passed-in struct object_context. Some callers just want
to specify flags, but don't need any details back. Convert them to
repo_get_oid_with_flags(), which provides just that and frees them from
dealing with the context structure.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new command "git last-modified" has been added to show the closest
ancestor commit that touched each path.
* tc/last-modified:
last-modified: use Bloom filters when available
t/perf: add last-modified perf script
last-modified: new subcommand to show when files were last modified
"git ls-files <pathspec>..." should not necessarily have to expand
the index fully if a sparsified directory is excluded by the
pathspec; the code is taught to expand the index on demand to avoid
this.
* ds/ls-files-lazy-unsparse:
ls-files: conditionally leave index sparse
After a partial stash, we may clear out the working tree by capturing
the output of diff-tree and piping it into git-apply (and likewise we
may use diff-index to restore the index). So we most definitely do not
want color diff output from that diff-tree process. And it normally
would not produce any, since its stdout is not going to a tty, and the
default value of color.ui is "auto".
However, if GIT_PAGER_IN_USE is set in the environment, that overrides
the tty check, and we'll produce a colorized diff that chokes git-apply:
$ echo y | GIT_PAGER_IN_USE=1 git stash -p
[...]
Saved working directory and index state WIP on main: 4f2e2bb foo
error: No valid patches in input (allow with "--allow-empty")
Cannot remove worktree changes
Setting this variable is a relatively silly thing to do, and not
something most users would run into. But we sometimes do it in our tests
to stimulate color. And it is a user-visible bug, so let's fix it rather
than work around it in the tests.
The root issue here is that diff-tree (and other diff plumbing) should
probably not ever produce color by default. It does so not by parsing
color.ui, but because of the baked-in "auto" default from 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10). But changing that is
risky; we've had discussions back and forth on the topic over the years.
E.g.:
https://lore.kernel.org/git/86D0A377-8AFD-460D-A90E-6327C6934DFC@gmail.com/.
So let's accept that as the status quo for now and protect ourselves by
passing --no-color to the child processes. This is the same thing we did
for add-interactive itself in 1c6ffb546b (add--interactive.perl: specify
--no-color explicitly, 2020-09-07).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flag `--show-object-format` from git-rev-parse is used for
retrieving the object storage format. This way, it is used for
querying repository metadata, fitting in the purpose of git-repo-info.
Add a new field `objects.format` to the git-repo-info subcommand
containing that information.
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Mentored-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Lucas Seiki Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other Git commands that have nul-terminated output (e.g. git-config,
git-status, git-ls-files) have a flag `-z` for using the null character
as the record separator.
Add the `-z` flag to git-repo-info as an alias for `--format=nul`,
making it consistent with the behavior of the other commands.
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Mentored-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Lucas Seiki Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depth computation can end early if all remaining commits are flagged.
The current code determines if that's the case by checking all queue
items each time it dequeues a flagged commit. This can cause
quadratic complexity.
We could simply count the flagged items in the queue and then update
that number as we add and remove items. That would provide a general
speedup, but leave one case where we have to scan the whole queue: When
we flag a previously seen, but unflagged commit. It could be on the
queue and then we'd have to decrease our count.
We could dedicate an object flag to track queue membership, but that
would leave less for candidate tags, affecting the results. So use a
hash table, specifically an oidset of commit hashes, to track that.
This avoids quadratic behaviour in all cases and provides a nice
performance boost over the previous commit, 08bb69d70f (describe: use
prio_queue_replace(), 2025-08-03):
Benchmark 1: ./git_08bb69d70f describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 855.3 ms ± 1.3 ms [User: 790.8 ms, System: 49.9 ms]
Range (min … max): 853.7 ms … 857.8 ms 10 runs
Benchmark 2: ./git describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 610.8 ms ± 1.7 ms [User: 546.9 ms, System: 49.3 ms]
Range (min … max): 608.9 ms … 613.3 ms 10 runs
Summary
./git describe $(git rev-list v2.41.0..v2.47.0) ran
1.40 ± 0.00 times faster than ./git_08bb69d70f describe $(git rev-list v2.41.0..v2.47.0)
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the ongoing effort to consolidate reference handling,
introduce a new `exists` subcommand. This command provides the same
functionality and exit-code behavior as `git show-ref --exists`, serving
as its modern replacement.
The logic for `show-ref --exists` is minimal. Rather than creating a
shared helper function which would be overkill for ~20 lines of code,
its implementation is intentionally duplicated here. This contrasts with
`git refs list`, where sharing the larger implementation of
`for-each-ref` was necessary.
Documentation for the new subcommand is also added to the `git-refs(1)`
man page.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Meet Soni <meetsoni3017@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/object-store-midx-dedup-info:
midx: compute paths via their source
midx: stop duplicating info redundant with its owning source
midx: write multi-pack indices via their source
midx: load multi-pack indices via their source
midx: drop redundant `struct repository` parameter
odb: simplify calling `link_alt_odb_entry()`
odb: return newly created in-memory sources
odb: consistently use "dir" to refer to alternate's directory
odb: allow `odb_find_source()` to fail
odb: store locality in object database sources
When comparing large commit ranges (e.g., 250,000+ commits), range-diff
attempts to allocate an n×n cost matrix that can exhaust available
memory. For example, with 256,784 commits (n = 513,568), the matrix
would require approximately 256GB of memory (513,568² × 4 bytes),
causing either immediate segmentation faults due to integer overflow or
system hangs.
Add a memory limit check in get_correspondences() before allocating the
cost matrix. This check uses the total size in bytes (n² × sizeof(int))
and compares it against a configurable maximum, preventing both
excessive memory usage and integer overflow issues.
The limit is configurable via a new --max-memory option that accepts
human-readable sizes (e.g., "1G", "500M"). The default is 4GB for 64 bit
systems and 2GB for 32 bit systems. This allows comparing ranges of
approximately 32,000 (16,000) commits - generous for real-world use cases
while preventing impractical operations.
When the limit is exceeded, range-diff now displays a clear error
message showing both the requested memory size and the maximum allowed,
formatted in human-readable units for better user experience.
Example usage:
git range-diff --max-memory=1G branch1...branch2
git range-diff --max-memory=500M base..topic1 base..topic2
This approach was chosen over alternatives:
- Pre-counting commits: Would require spawning additional git processes
and reading all commits twice
- Limiting by commit count: Less precise than actual memory usage
- Streaming approach: Would require significant refactoring of the
current algorithm
This issue was previously discussed in:
https://lore.kernel.org/git/RFC-cover-v2-0.5-00000000000-20211210T122901Z-avarab@gmail.com/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paulo Casaretto <pcasaretto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe <blob>" misbehaves and/or crashes in some corner
cases, which has been taught to exit with failure gracefully.
* jk/describe-blob:
describe: pass commit to describe_commit()
describe: handle blob traversal with no commits
describe: catch unborn branch in describe_blob()
describe: error if blob not found
describe: pass oid struct by const pointer
Our 'git last-modified' performs a revision walk, and computes a diff at
each point in the walk to figure out whether a given revision changed
any of the paths it considers interesting.
When changed-path Bloom filters are available, we can avoid computing
many such diffs. Before computing a diff, we first check if any of the
remaining paths of interest were possibly changed at a given commit by
consulting its Bloom filter. If any of them are, we are resigned to
compute the diff.
If none of those queries returned "maybe", we know that the given commit
doesn't contain any changed paths which are interesting to us. So, we
can avoid computing it in this case.
Comparing the perf test results on git.git:
Test HEAD~ HEAD
------------------------------------------------------------------------------------
8020.1: top-level last-modified 4.49(4.34+0.11) 2.22(2.05+0.09) -50.6%
8020.2: top-level recursive last-modified 5.64(5.45+0.11) 5.62(5.30+0.11) -0.4%
8020.3: subdir last-modified 0.11(0.06+0.04) 0.07(0.03+0.04) -36.4%
Based-on-patch-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to git-blame(1), introduce a new subcommand
git-last-modified(1). This command shows the most recent modification to
paths in a tree. It does so by expanding the tree at a given commit,
taking note of the current state of each path, and then walking
backwards through history looking for commits where each path changed
into its final commit ID.
Based-on-patch-by: Jeff King <peff@peff.net>
Improved-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git ls-files' with a pathspec, the index entries get
filtered according to that pathspec before iterating over them in
show_files(). In 78087097b8 (ls-files: add --sparse option,
2021-12-22), this iteration was prefixed with a check for the '--sparse'
option which allows the command to output directory entries; this
created a pre-loop call to ensure_full_index().
However, when a user runs 'git ls-files' where the pathspec matches
directories that are recursively matched in the sparse-checkout, there
are not any sparse directories that match the pathspec so they would not
be written to the output. The expansion in this case is just a
performance drop for no behavior difference.
Replace this global check to expand the index with a check inside the
loop for a matched sparse directory. If we see one, then expand the
index and continue from the current location. This is safe since the
previous entries in the index did not have any sparse directories and
thus would remain stable in this expansion.
A test in t1092 confirms that this changes the behavior.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As support for this setting was deprecated in the last commit print a
warning (or die when WITH_BREAKING_CHANGES is enabled) if it is set.
Avoid bombarding the user with warnings by only printing it (a) when
running commands that call "git commit" and (b) only once per command.
Some scaffolding is added to repo_read_config() to allow it to
detect deprecated config settings and warn about them. As both
"core.commentChar" and "core.commentString" set the comment
character we record which one of them is used and tailor the
warning message appropriately.
Note the odd combination of die_message() followed by die(NULL)
is to allow the next commit to insert a call to advise() in the middle.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "core.commentString" is set to "auto" then "git commit" will
automatically select the comment character ensuring that it is not the
first character on any of the lines in the commit message. This was
introduced by commit 84c9dc2c5a (commit: allow core.commentChar=auto
for character auto selection, 2014-05-17). The motivation seems to be
to avoid commenting out lines from the existing message when amending
a commit that was created with a message from a file.
Unfortunately this feature does not work with:
* commit message templates that contain comments.
* prepare-commit-msg hooks that introduce comments.
* "git commit --cleanup=strip --edit -F <file>" which means that it
is incompatible with
- the "fixup" and "squash" commands of "git rebase -i" as the
comments added by those commands are then treated as part of
the commit message.
- the conflict comments added to the commit message by "git
cherry-pick", "git rebase" etc. as these comments are then
treated as part of the commit message.
It is also ignored by "git notes" when amending a note.
The issues with comments coming from a template, hook or file are a
consequence of the design of this feature and are therefore hard to
fix.
As the costs of this feature outweigh the benefits, deprecate it and
remove it in Git 3.0. If someone comes up with some patches that fix
all the issues in a maintainable way then I'd be happy to see this
change reverted.
The next commits will add a warning and some advice for users on how
they can update their config settings.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new subcommand "git repo" gives users a way to grab various
repository characteristics.
* lo/repo-info:
repo: add the --format flag
repo: add the field layout.shallow
repo: add the field layout.bare
repo: add the field references.format
repo: declare the repo command
Remove dependency on the_repository and other globals from the
commit-graph code, and other changes unrelated to de-globaling.
* ps/commit-graph-wo-globals:
commit-graph: stop passing in redundant repository
commit-graph: stop using `the_repository`
commit-graph: stop using `the_hash_algo`
commit-graph: refactor `parse_commit_graph()` to take a repository
commit-graph: store the hash algorithm instead of its length
commit-graph: stop using `the_hash_algo` via macros
"git cmd --help-all" now works outside repositories.
* dk/help-all:
builtin: also setup gently for --help-all
parse-options: refactor flags for usage_with_options_internal
Object database transactions in the bulk-checkin subsystem rely on
global state to track transaction status. Stop relying on global state
and instead store the transaction in the `struct object_database`.
Functions that operate on transactions are updated to now wire
transaction state.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ac/deglobal-fmt-merge-log-config:
builtin/fmt-merge-msg: stop depending on 'the_repository'
environment: remove the global variable 'merge_log_config'
"git diff --no-index" run inside a subdirectory under control of a
Git repository operated at the top of the working tree and stripped
the prefix from the output, and oddballs like "-" (stdin) did not
work correctly because of it. Correct the set-up by undoing what
the set-up sequence did to cwd and prefix.
* jc/diff-no-index-in-subdir:
diff: --no-index should ignore the worktree
The "list" subcommand of "git refs" acts as a front-end for
"git for-each-ref".
* ms/refs-list:
t: add test for git refs list subcommand
t6300: refactor tests to be shareable
builtin/refs: add list subcommand
builtin/for-each-ref: factor out core logic into a helper
builtin/for-each-ref: align usage string with the man page
doc: factor out common option
Arrays of strbuf is often a wrong data structure to use, and
strbuf_split*() family of functions that create them often have
better alternatives.
Update several code paths and replace strbuf_split*().
* jc/strbuf-split:
trace2: do not use strbuf_split*()
trace2: trim_trailing_newline followed by trim is a no-op
sub-process: do not use strbuf_split*()
environment: do not use strbuf_split*()
config: do not use strbuf_split()
notes: do not use strbuf_split*()
merge-tree: do not use strbuf_split*()
clean: do not use strbuf_split*() [part 2]
clean: do not pass the whole structure when it is not necessary
clean: do not use strbuf_split*() [part 1]
clean: do not pass strbuf by value
wt-status: avoid strbuf_split*()
