This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there is no (single) `/etc/` directory. To address that, in
conjunction with the libgit2 project, Git for Windows introduced yet
another level of system-wide config files, located in C:\ProgramData
(and the equivalent on Windows XP).
Let's spell this out in the documentation.
This closes https://github.com/git-for-windows/git/pull/470 (because
there was no reaction in three months in that Pull Request).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
On XP, there is no %PROGRAMDATA%, therefore we need to use
"%ALLUSERSPROFILE%\Application Data\Git\config" in those setups.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since commit 0c499ea60f the send-pack builtin uses the side-band-64k
capability if advertised by the server.
Unfortunately this breaks pushing over the dump git protocol if used
over a network connection.
The detailed reasons for this breakage are (by courtesy of Jeff Preshing,
quoted from ttps://groups.google.com/d/msg/msysgit/at8D7J-h7mw/eaLujILGUWoJ):
----------------------------------------------------------------------------
MinGW wraps Windows sockets in CRT file descriptors in order to mimic the
functionality of POSIX sockets. This causes msvcrt.dll to treat sockets as
Installable File System (IFS) handles, calling ReadFile, WriteFile,
DuplicateHandle and CloseHandle on them. This approach works well in simple
cases on recent versions of Windows, but does not support all usage patterns.
In particular, using this approach, any attempt to read & write concurrently
on the same socket (from one or more processes) will deadlock in a scenario
where the read waits for a response from the server which is only invoked after
the write. This is what send_pack currently attempts to do in the use_sideband
codepath.
----------------------------------------------------------------------------
The new config option "sendpack.sideband" allows to override the side-band-64k
capability of the server, and thus makes the dump git protocol work.
Other transportation methods like ssh and http/https still benefit from
the sideband channel, therefore the default value of "sendpack.sideband"
is still true.
Signed-off-by: Thomas Braun <thomas.braun@byte-physics.de>
A '+' is not a valid part of a filename with Windows file systems (it is
reserved because the '+' operator meant file concatenation back in the
DOS days).
Let's just not use it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Git for Windows ships with its own Perl interpreter, and insists on
using it, so it will most likely wreak havoc if PERL5LIB is set before
launching Git.
Let's just unset that environment variables when spawning processes.
To make this feature extensible (and overrideable), there is a new
config setting `core.unsetenvvars` that allows specifying a
comma-separated list of names to unset before spawning processes.
Reported by Gabriel Fuhrmann.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This feature is still highly experimental and has not even been
contributed to the Git mailing list yet: the feature still needs to be
battle-tested more.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"git fetch <there> <src>:<dst>" allows an object name on the <src>
side when the other side accepts such a request since Git v2.5, but
the documentation was left stale.
* jc/fetch-refspec-doc-update:
fetch doc: src side of refspec could be full SHA-1
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Doc update.
* kd/doc-for-each-ref:
doc/for-each-ref: explicitly specify option names
doc/for-each-ref: consistently use '=' to between argument names and values
The documentation for '-X<option>' for merges was misleadingly
written to suggest that "-s theirs" exists, which is not the case.
* jc/merge-x-theirs-docfix:
merge-strategies: avoid implying that "-s theirs" exists
Since a9d34933 ("Merge branch 'fm/fetch-raw-sha1'", 2015-06-01) we
allow to fetch by an object name when the other side accepts such a
request, but we never updated the documentation to match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6be4595edb.
That commit weakened the "always" setting of color config so
that it acted as "auto". This was meant to solve regressions
in v2.14.2 in which setting "color.ui=always" in the on-disk
config broke scripts like add--interactive, because the
plumbing diff commands began to generate color output.
This was due to 136c8c8b8f (color: check color.ui in
git_default_config(), 2017-07-13), which was in turn trying
to fix issues caused by 4c7f1819b3 (make color.ui default to
'auto', 2013-06-10). But in weakening "always", we created
even more problems, as people expect to be able to use "git
-c color.ui=always" to force color (especially because some
commands don't have their own --color flag). We can fix that
by special-casing the command-line "-c", but now things are
getting pretty confusing.
Instead of piling hacks upon hacks, let's start peeling off
the hacks. The first step is dropping the weakening of
"always", which this revert does.
Note that we could actually revert the whole series merged
in by da15b78e52. Most of that
series consists of preparations to the tests to handle the
weakening of "-c color.ui=always". But it's worth keeping
for a few reasons:
- there are some other preparatory cleanups, like
e433749d86 (test-terminal: set TERM=vt100, 2017-10-03)
- it adds "--color" options more consistently in
0c88bf5050 (provide --color option for all ref-filter
users, 2017-10-03)
- some of the cases dropping "-c" end up being more robust
and realistic tests, as in 01c94e9001 (t7508: use
test_terminal for color output, 2017-10-03)
- the preferred tool for overriding config is "--color",
and we should be modeling that consistently
We can individually revert the few commits necessary to
restore some useful tests (which will be done on top of this
patch).
Note that this isn't a pure revert; we'll keep the test
added in t3701, but mark it as failure for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
There are "git checkout [-p][<tree-ish>][--][<paths>...]" in the
SYNOPSIS section, and "git checkout [-p][<tree-ish>][--]<paths>..."
as the header for the section that explains the "check out paths
from index/tree-ish" mode. It is unclear if we require at least one
path, or it is entirely optional.
Actually, both are wrong. Without the "-p(atch)" option, you must
have <pathspec> (otherwise, with a commit that is a <tree-ish>, you
would be checking out that commit to build a new history on top of
it). With it, it is already clear that you are checking out paths,
it is optional. In other words, you cannot omit both.
The source of the confusion is that -p(atch) is described as if it
is just another "optional" part and its description is lumped
together with the non patch mode, even though the actual end user
experience is vastly different.
Let's split the entry into two, and describe the regular mode and
the patch mode separately. This allows us to make it clear that the
regular mode MUST be given at least one pathspec, that the patch
mode can be invoked with either '-p' or '--patch' but one of these
must be given, and that the pathspec is entirely optional in the
patch mode.
Also, revamp the explanation of "checkout paths" by removing
extraneous description at the beginning, that says "checking out
paths is not checking out a branch". Explaining what it is for and
when the user wants to use it upfront is the most direct way to help
the readers.
Noticed-by: Robert P J Day
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be handy to use `--color=always` (or it's synonym
`--color`) on the command-line to convince a command to
produce color even if it's stdout isn't going to the
terminal or a pager.
What's less clear is whether it makes sense to set config
variables like color.ui to `always`. For a one-shot like:
git -c color.ui=always ...
it's potentially useful (especially if the command doesn't
directly support the `--color` option). But setting `always`
in your on-disk config is much muddier, as you may be
surprised when piped commands generate colors (and send them
to whatever is consuming the pipe downstream).
Some people have done this anyway, because:
1. The documentation for color.ui makes it sound like
using `always` is a good idea, when you almost
certainly want `auto`.
2. Traditionally not every command (and especially not
plumbing) respected color.ui in the first place. So
the confusion came up less frequently than it might
have.
The situation changed in 136c8c8b8f (color: check color.ui
in git_default_config(), 2017-07-13), which negated point
(2): now scripts using only plumbing commands (like
add-interactive) are broken by this setting.
That commit was fixing real issues (e.g., by making
`color.ui=never` work, since `auto` is the default), so we
don't want to just revert it. We could turn `always` into a
noop in plumbing commands, but that creates a hard-to-explain
inconsistency between the plumbing and other commands.
Instead, let's just turn `always` into `auto` for all config.
This does break the "one-shot" config shown above, but again,
we're probably better to have simple and consistent rules than
to try to special-case command-line config.
There is one place where `always` should retain its meaning:
on the command line, `--color=always` should continue to be
the same as `--color`, overriding any isatty checks. Since the
command-line parser also depends on git_config_colorbool(), we
can use the existence of the "var" string to deterine whether
we are serving the command-line or the config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ref-filter learned about want_color() in 11b087adfd
(ref-filter: consult want_color() before emitting colors,
2017-07-13), it became useful to be able to turn colors off
and on for specific commands. For git-branch, you can do so
with --color/--no-color.
But for git-for-each-ref and git-tag, the other users of
ref-filter, you have no option except to tweak the
"color.ui" config setting. Let's give both of these commands
the usual color command-line options.
This is a bit more obvious as a method for overriding the
config. And it also prepares us for the behavior of "always"
changing (so that we are still left with a way of forcing
color when our output goes to a non-terminal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving spaces around the `-delimeters for commands means asciidoc fails
to parse them as the start of a literal string. Remove an extraneous
space that is causing a literal to not be formatted as such.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Acked-by: Andreas Heiduk <asheiduk@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ability to exclude paths with a negative pathspec is not mentioned
in the man pages for git grep and other commands where it might be
useful.
Add an example and a pointer to the pathspec glossary entry in the man
page for git grep to help the user to discover this ability.
Add similar pointers from the git-add and git-status man pages.
Additionally,
- Add a test for the behaviour when multiple exclusions are present.
- Add a test for the ^ alias.
- Improve name of existing test.
- Improve grammar in glossary description of the exclude pathspec.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Manav Rathi <mnvrth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References to multi-word configuration variable names in our
documentation must consistently use camelCase to highlight where
the word boundaries are, even though these are treated case
insensitively.
Fix a few places that spell them in all lowercase, which makes
them harder to read.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of `-Xours` merge option has a parenthetical note
that tells the readers that it is very different from `-s ours`,
which is correct, but the description of `-Xtheirs` that follows it
carelessly says "this is the opposite of `ours`", giving a false
impression that the readers also need to be warned that it is very
different from `-s theirs`, which in reality does not even exist.
Clarify it a bit to avoid misleading readers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-read-tree manpage has a table that is meant to
be shown with its spacing exactly as it is in the source. We
mark it as a "literal paragraph" by indenting each line by
at least one space. This renders OK with asciidoc for both
the HTML and manpage versions.
But there are two problems when we render it with
asciidoctor.
The first is that some lines mix tabs and spaces. Even if
asciidoctor is correctly configured for 8-space tabs, it
seems to handle this case differently, soaking up some of
the initial literal-paragraph spaces and mis-aligning the
table text.
The second problem is that the table uses blank lines to
group rows. But as blank lines separate paragraphs in
asciidoc, this actually means that each chunk of the table
is rendered in its own pre-formatted <div> block. This
happens even with vanilla asciidoc, but there's no visible
result because the literal paragraphs aren't styled in any
special way. But with asciidoctor (or at least the styles
used on git-scm.com), literal paragraphs are styled with a
different background. This breaks the table into a visually
distracting sequence of chunks.
We can fix both by adding a literal-paragraph block
delimiter. That turns the whole table into a single block
(for both implementations) and causes asciidoctor to render
the indentation as it is in the source.
Reported-at: https://github.com/git/git-scm.com/issues/1023
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following are several fixes for duplicated words ("of of") and one
case where an extra article ("a") slipped in.
Signed-off-by: Evan Zacks <zackse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For count, sort and format, only the argument names were listed under
OPTIONS, not the option names.
Add the option names to make it clear the options exist
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis and description inconsistently add a '=' between the
argument name and it's value. Make this consistent.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-cvsserver script is old and largely unmaintained
these days. But git-shell allows untrusted users to run it
out of the box, significantly increasing its attack surface.
Let's drop it from git-shell's list of internal handlers so
that it cannot be run by default. This is not backwards
compatible. But given the age and development activity on
CVS-related parts of Git, this is likely to impact very few
users, while helping many more (i.e., anybody who runs
git-shell and had no intention of supporting CVS).
There's no configuration mechanism in git-shell for us to
add a boolean and flip it to "off". But there is a mechanism
for adding custom commands, and adding CVS support here is
fairly trivial. Let's document it to give guidance to
anybody who really is still running cvsserver.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
