makes the next patch easier, where we will migrate to the paths being
owned by a strvec. given that we are talking about command line
parameters here it's also not like we have tons of allocations that this
would save
while at it, fix a memory leak
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `add_slash()` function will only conditionally return an allocated
string when the passed-in string did not yet have a trailing slash. This
makes the memory ownership harder to track than really necessary.
It's dubious whether this optimization really buys us all that much. The
number of times we execute this function is bounded by the number of
arguments to git-mv(1), so in the typical case we may end up saving an
allocation or two.
Simplify the code to unconditionally return allocated strings.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never release memory associated with `struct credential`. Fix this
and mark the corresponding test as leak free.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The out parameter of `git_config_string()` is a `const char **` even
though we transfer ownership of memory to the caller. This is quite
misleading and has led to many memory leaks all over the place. Adapt
the parameter to instead be `char **`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit does the exact same as the preceding commit, only for the
format configuration instead of the log configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're using global variables to store the log configuration. Many of
these can be set both via the command line and via the config, and
depending on how they are being set, they may contain allocated strings.
This leads to hard-to-track memory ownership and memory leaks.
Refactor the code to instead use a `struct log_config` that is being
allocated on the stack. This allows us to more clearly scope the
variables, track memory ownership and ultimately release the memory.
This also prepares us for a change to `git_config_string()`, which will
be adapted to have a `char **` out parameter instead of `const char **`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The out parameter of `git_config_pathname()` is a `const char **` even
though we transfer ownership of memory to the caller. This is quite
misleading and has led to many memory leaks all over the place. Adapt
the parameter to instead be `char **`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `unique_tracking_name()` returns an allocated string, but
does not clearly indicate this because its return type is `const char *`
instead of `char *`. This has led to various callsites where we never
free its returned memory at all, which causes memory leaks.
Plug those leaks and mark now-passing tests as leak free.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to symbolic refs can now be made as a part of ref
transaction.
* kn/ref-transaction-symref:
refs: remove `create_symref` and associated dead code
refs: rename `refs_create_symref()` to `refs_update_symref()`
refs: use transaction in `refs_create_symref()`
refs: add support for transactional symref updates
refs: move `original_update_refname` to 'refs.c'
refs: support symrefs in 'reference-transaction' hook
files-backend: extract out `create_symref_lock()`
refs: accept symref values in `ref_transaction_update()`
The refs API lost functions that implicitly assumes to work on the
primary ref_store by forcing the callers to pass a ref_store as an
argument.
* ps/refs-without-the-repository:
refs: remove functions without ref store
cocci: apply rules to rewrite callers of "refs" interfaces
cocci: introduce rules to transform "refs" to pass ref store
refs: add `exclude_patterns` parameter to `for_each_fullref_in()`
refs: introduce missing functions that accept a `struct ref_store`
"git tag" learned the "--trailer" option to futz with the trailers
in the same way as "git commit" does.
* jp/tag-trailer:
builtin/tag: add --trailer option
builtin/commit: refactor --trailer logic
builtin/commit: use ARGV macro to collect trailers
* tag 'v2.45.1': (42 commits)
Git 2.45.1
Git 2.44.1
Git 2.43.4
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
...
The singleton index_state instance "the_index" has been eliminated
by always instantiating "the_repository" and replacing references
to "the_index" with references to its .index member.
* ps/the-index-is-no-more:
repository: drop `initialize_the_repository()`
repository: drop `the_index` variable
builtin/clone: stop using `the_index`
repository: initialize index in `repo_init()`
builtin: stop using `the_index`
t/helper: stop using `the_index`
The credential helper protocol, together with the HTTP layer, have
been enhanced to support authentication schemes different from
username & password pair, like Bearer and NTLM.
* bc/credential-scheme-enhancement:
credential: add method for querying capabilities
credential-cache: implement authtype capability
t: add credential tests for authtype
credential: add support for multistage credential rounds
t5563: refactor for multi-stage authentication
docs: set a limit on credential line length
credential: enable state capability
credential: add an argument to keep state
http: add support for authtype and credential
docs: indicate new credential protocol fields
credential: add a field called "ephemeral"
credential: gate new fields on capability
credential: add a field for pre-encoded credentials
http: use new headers for each object request
remote-curl: reset headers on new request
credential: add an authtype field
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `for_each_fullref_in()` function is supposedly the ref-store-less
equivalent of `refs_for_each_fullref_in()`, but the latter has gained a
new parameter `exclude_patterns` over time. Bring these two functions
back in sync again by adding the parameter to the former function, as
well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-tag supports interpreting trailers from an annotated tag message,
using --list --format="%(trailers)". However, the available methods to
add a trailer to a tag message (namely -F or --editor) are not as
ergonomic.
In a previous patch, we moved git-commit's implementation of its
--trailer option to the trailer.h API. Let's use that new function to
teach git-tag the same --trailer option, emulating as much of
git-commit's behavior as much as possible.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: John Passaro <john.a.passaro@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit adds user trailers to the commit message by passing its
`--trailer` arguments to a child process running `git-interpret-trailers
--in-place`. This logic is broadly useful, not just for git-commit but
for other commands constructing message bodies (e.g. git-tag).
Let's move this logic from git-commit to a new function in the trailer
API, so that it can be re-used in other commands.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Passaro <john.a.passaro@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace git-commit's callback for --trailer with the standard
OPT_PASSTHRU_ARGV macro. The callback only adds its values to a strvec
and sanity-checks that `unset` is always false; both of these are
already implemented in the parse-option API.
Signed-off-by: John Passaro <john.a.passaro@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `refs_create_symref()` function is used to update/create a symref.
But it doesn't check the old target of the symref, if existing. It force
updates the symref. In this regard, the name `refs_create_symref()` is a
bit misleading. So let's rename it to `refs_update_symref()`. This is
akin to how 'git-update-ref(1)' also allows us to create apart from
update.
While we're here, rename the arguments in the function to clarify what
they actually signify and reduce confusion.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `ref_transaction_update()` obtains ref information and
flags to create a `ref_update` and add them to the transaction at hand.
To extend symref support in transactions, we need to also accept the
old and new ref targets and process it. This commit adds the required
parameters to the function and modifies all call sites.
The two parameters added are `new_target` and `old_target`. The
`new_target` is used to denote what the reference should point to when
the transaction is applied. Some functions allow this parameter to be
NULL, meaning that the reference is not changed.
The `old_target` denotes the value the reference must have before the
update. Some functions allow this parameter to be NULL, meaning that the
old value of the reference is not checked.
We also update the internal function `ref_transaction_add_update()`
similarly to take the two new parameters.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, `git config -h` would have printed help for the old-style
syntax. Now that all modes have proper subcommands though it is
preferable to instead display the subcommand help.
Drop the `NO_INTERNAL_HELP` flag to do so. While at it, drop the help
mismatch in t0450 and add the `--get-colorbool` option to the usage such
that git-config(1)'s synopsis and `git config -h` match.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "edit" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "remove-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "rename-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "unset" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "set" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "get" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git-config(1) has several modes, those modes are not exposed with
subcommands but instead by specifying action flags like `--unset` or
`--list`. This user interface is not really in line with how our more
modern commands work, where it is a lot more customary to say e.g. `git
remote list`. Furthermore, to add to the confusion, git-config(1) also
allows the user to request modes implicitly by just specifying the
correct number of arguments. Thus, `git config foo.bar` will retrieve
the value of "foo.bar" while `git config foo.bar baz` will set it to
"baz".
Overall, this makes for a confusing interface that could really use a
makeover. It hurts discoverability of what you can do with git-config(1)
and is comparatively easy to get wrong. Converting the command to have
subcommands instead would go a long way to help address these issues.
One concern in this context is backwards compatibility. Luckily, we can
introduce subcommands without breaking backwards compatibility at all.
This is because all the implicit modes of git-config(1) require that the
first argument is a properly formatted config key. And as config keys
_must_ have a dot in their name, any value without a dot would have been
discarded by git-config(1) previous to this change. Thus, given that
none of the subcommands do have a dot, they are unambiguous.
Introduce the first such new subcommand, which is "git config list". To
retain backwards compatibility we only conditionally use subcommands and
will fall back to the old syntax in case no subcommand was detected.
This should help to transition to the new-style syntax until we
eventually deprecate and remove the old-style syntax.
Note that the way we handle this we're duplicating some functionality
across old and new syntax. While this isn't pretty, it helps us to
ensure that there really is no change in behaviour for the old syntax.
Amend tests such that we run them both with old and new style syntax.
As tests are now run twice, state from the first run may be still be
around in the second run and thus cause tests to fail. Add cleanup logic
as required to fix such tests.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pull out function to handle the `--null` option, which we are about to
reuse in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's quite a bunch of options to git-config(1) that allow the user to
specify which config location to use when reading or writing config
options. The logic to handle this is thus by necessity also quite
involved.
Pull it out into a separate function so that we can reuse it in
subsequent commits which introduce proper subcommands.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-config(1) command has various different modes which are
accessible via e.g. `--get-urlmatch` or `--unset-all`. These modes are
declared with `OPT_BIT()`, which causes two minor issues:
- The respective modes also have a negated form `--no-get-urlmatch`,
which is unintended.
- We have to manually handle exclusiveness of the modes.
Switch these options to instead use `OPT_CMDMODE()`, which is made
exactly for this usecase. Remove the now-unneeded check that only a
single mode is given, which is now handled by the parse-options
interface.
While at it, format optional placeholders for arguments to conform to
our style guidelines by using `[<placeholder>]`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--fixed-value` option can be used to alter how the value-pattern
parameter is interpreted for the various actions of git-config(1). But
while it is an option, it is currently listed as part of the actions
group, which is wrong.
Move the option to the "Other" group, which hosts the various options
known to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move around the option array. This will help us with a follow-up commit
that introduces subcommands to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ownership of memory returned when preparing a comment string is
quite intricate: when the returned value is different than the passed
value, then the caller is responsible to free the memory. This is quite
subtle, and it's even easier to miss because the returned value is in
fact a `const char *`.
Adapt the function to always return either `NULL` or a newly allocated
string. The function is called at most once per git-config(1), so it's
not like this micro-optimization really matters. Thus, callers are now
always responsible for freeing the value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A scheduled "git maintenance" job is expected to work on all
repositories it knows about, but it stopped at the first one that
errored out. Now it keeps going.
* js/for-each-repo-keep-going:
maintenance: running maintenance should not stop on errors
for-each-repo: optionally keep going on an error
The "--rfc" option of "git format-patch" learned to take an
optional string value to be used in place of "RFC" to tweak the
"[PATCH]" on the subject header.
* jc/format-patch-rfc-more:
format-patch: "--rfc=-(WIP)" appends to produce [PATCH (WIP)]
format-patch: allow --rfc to optionally take a value, like --rfc=WIP
The "-k" and "--rfc" options of "format-patch" will now error out
when used together, as one tells us not to add anything to the
title of the commit, and the other one tells us to add "RFC" in
addition to "PATCH".
* ds/format-patch-rfc-and-k:
format-patch: ensure that --rfc and -k are mutually exclusive
The procedure to build multi-pack-index got confused by the
replace-refs mechanism, which has been corrected by disabling the
latter.
* xx/disable-replace-when-building-midx:
midx: disable replace objects
* maint-2.44: (41 commits)
Git 2.44.1
Git 2.43.4
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
...
Leakfix.
* rj/add-i-leak-fix:
add: plug a leak on interactive_add
add-patch: plug a leak handling the '/' command
add-interactive: plug a leak in get_untracked_files
apply: plug a leak in apply_data
In https://github.com/microsoft/git/issues/623, it was reported that
maintenance stops on a missing repository, omitting the remaining
repositories that were scheduled for maintenance.
This is undesirable, as it should be a best effort type of operation.
It should still fail due to the missing repository, of course, but not
leave the non-missing repositories in unmaintained shapes.
Let's use `for-each-repo`'s shiny new `--keep-going` option that we just
introduced for that very purpose.
This change will be picked up when running `git maintenance start`,
which is run implicitly by `scalar reconfigure`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/microsoft/git/issues/623, it was reported that
the regularly scheduled maintenance stops if one repo in the middle of
the list was found to be missing.
This is undesirable, and points out a gap in the design of `git
for-each-repo`: We need a mode where that command does not stop on an
error, but continues to try running the specified command with the other
repositories.
Imitating the `--keep-going` option of GNU make, this commit teaches
`for-each-repo` the same trick: to continue with the operation on all
the remaining repositories in case there was a problem with one
repository, still setting the exit code to indicate an error occurred.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "receive-pack" program (which responds to "git push") was not
converted to run "git maintenance --auto" when other codepaths that
used to run "git gc --auto" were updated, which has been corrected.
* ps/run-auto-maintenance-in-receive-pack:
builtin/receive-pack: convert to use git-maintenance(1)
run-command: introduce function to prepare auto-maintenance process
The way "git fast-import" handles paths described in its input has
been tightened up and more clearly documented.
* ta/fast-import-parse-path-fix:
fast-import: make comments more precise
fast-import: forbid escaped NUL in paths
fast-import: document C-style escapes for paths
fast-import: improve documentation for path quoting
fast-import: remove dead strbuf
fast-import: allow unquoted empty path for root
fast-import: directly use strbufs for paths
fast-import: tighten path unquoting
In the previous step, the "--rfc" option of "format-patch" learned
to take an optional string value to prepend to the subject prefix,
so that --rfc=WIP can give "[WIP PATCH]".
There may be cases in which the extra string wants to come after the
subject prefix. Extend the mechanism to allow "--rfc=-(WIP)" [*] to
signal that the extra string is to be appended instead of getting
prepended, resulting in "[PATCH (WIP)]".
In the documentation, discourage (ab)using "--rfc=-RFC" to say
"[PATCH RFC]" just to be different, when "[RFC PATCH]" is the norm.
[Footnote]
* The syntax takes inspiration from Perl's open syntax that opens
pipes "open fh, '|-', 'cmd'", where the dash signals "the other
stuff comes here".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the "--rfc" option, we can tweak the "[PATCH]" (or whatever
string specified with the "--subject-prefix" option, instead of
"PATCH") that we prefix the title of the commit with into "[RFC
PATCH]", but some projects may want "[rfc PATCH]". Adding a new
option, e.g., "--rfc-lowercase", to support such need every time
somebody wants to use different strings would lead to insanity of
accumulating unbounded number of such options.
Allow an optional value specified for the option, so that users can
use "--rfc=rfc" (think of "--rfc" without value as a short-hand for
"--rfc=RFC") if they wanted to.
This can of course be (ab)used to make the prefix "[WIP PATCH]" by
passing "--rfc=WIP". Passing an empty string, i.e., "--rfc=", is
the same as "--no-rfc" to override an option given earlier on the
same command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a leak we have since 5a76aff1a6 (add: convert to use
parse_pathspec, 2013-07-14).
This leak can be triggered with:
$ git add -p anything
Fixing this leak allows us to mark as leak-free the following tests:
+ t3701-add-interactive.sh
+ t7514-commit-patch.sh
Mark them with "TEST_PASSES_SANITIZE_LEAK=true" to notice and fix
promply any new leak that may be introduced and triggered by them in the
future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
