Add an entry for --tool-help to the mergetool documentation.
Move --tool-help in the difftool documentation so that it is
listed immediately after --tool so that it is easier to find.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code tries to get a list of documented commands
by doing "ls Documentation/git*txt" and culling a bunch of
special cases from the result. Looking for "git-*.txt" would
be more accurate, but would miss a few commands like
"gitweb" and "gitk".
Fortunately, Documentation/Makefile already knows what this
list is, so we can just ask it. Annoyingly, we still have to
post-process its output a little, since make will print
extra cruft like "GIT-VERSION-FILE is up to date" to stdout.
Now that our list is accurate, we can remove all of the ugly
special-cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These commands were never added to the command-list. Adding
them makes "make check-docs" run without complaint.
While we're at it, let's capitalize the first letter of
their one-line summaries to match the rest of the git
manpages.
The credential-cache--daemon command is somewhat special. It
is already ignored by check-docs because it contains a "--",
marking it as a non-interesting implementation detail. It
is, in fact, documented, but since the documentation
basically just redirects you to a more appropriate command
anyway, let's explicitly omit it so it is not mentioned in
git(1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e30b2feb1b (Jun 24 2012, add 'git credential' plumbing command)
forgot to add git-credential to command-list.txt, hence the command was
not appearing in the documentation, making it hard for users to discover
it.
While we're there, capitalize the description line for git-crendential
for consistency with other commands.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asciidoc converts a listing block like:
----------------------
$ git log --merge
----------------------
it marks it to be displayed in a monospace font. This works
fine when generating HTML output. However, when generating
docbook output, we override the expansion of a listingblock
to work around bugs in some versions of the docbook
toolchain. Our override did not mark the listingblock with
the "monospaced" class.
The main output that uses docbook as an intermediate format
is the manpages. We didn't notice any issue there because
the monospaced class seems to be ignored when generating
roff from the docbook manpages.
However, when generating texinfo to make info pages, docbook
does respect this class. The resulting texinfo output
properly uses "@example" blocks to display the listing in
this case. Besides possibly looking prettier in some texinfo
backends, one important effect is that the monospace font
suppresses texinfo's expansion of "--" and "---" into
en-dashes and em-dashes. With the current code, the example
above ends up looking like "git log -merge", which is
confusing and wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- (glossary) the quotes around the Wikipedia URL prevented its
linkification in frontends that support it; remove them
- (manual) newer version (SHA-1) == following, older == preceding, not
the other way around
- trivial typo and wording fixes
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is an implementation detail that a new tag is created by adding a
file in the .git/refs/tags directory. The only thing the user needs
to know is that a "git tag" creates a ref in the refs/tags namespace,
and without "-f", it does not overwrite an existing tag.
Inspired by a report from 乙酸鋰 <ch3cooli@gmail.com>; I think I
caught all the existing mention in Documentation/ directory in the
tip of 1.7.9.X maintenance track, but we may have added new ones
since then.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts such as "git rebase -i" cannot currently cherry-pick commits
which have an empty commit message, as git cherry-pick calls git
commit without the --allow-empty-message option.
Add an --allow-empty-message option to git cherry-pick which is passed
through to git commit, so this behaviour can be overridden.
Signed-off-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep.extendedRegexp configuration setting enables the -E flag on grep
by default but there are no equivalents for the -G, -F and -P flags.
Rather than adding an additional setting for grep.fooRegexp for current
and future pattern matching options, add a grep.patternType setting that
can accept appropriate values for modifying the default grep pattern
matching behavior. The current values are "basic", "extended", "fixed",
"perl" and "default" for setting -G, -E, -F, -P and the default behavior
respectively.
When grep.patternType is set to a value other than "default", the
grep.extendedRegexp setting is ignored. The value of "default" restores
the current default behavior, including the grep.extendedRegexp
behavior.
Signed-off-by: J Smith <dark.panda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"$GIT_DIR/COMMIT_EDITMSG" file that is used to hold the commit log
message user edits was not documented.
* jk/maint-commit-document-editmsg:
commit: document the temporary commit message file
"git commit-tree" learned a more natural "-p <parent> <tree>" order
of arguments long time ago, but recently forgot it by mistake.
* kk/maint-commit-tree:
Revert "git-commit-tree(1): update synopsis"
commit-tree: resurrect command line parsing updates
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
We instead failed with an undocumented exit status 255.
Also define a "catch-all" status and document it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was a bit hard to learn how <rev>^@, <rev>^! and various other
forms of range specifiers are used, because they were discussed
mostly in the prose part of the documentation, unlike various forms
of extended SHA-1 expressions that are listed in an enumerated list.
Also add a few more examples showing use of <rev>, <rev>..<rev> and
<rev>^! forms, stolen from a patch by Max Horn.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mergetool" did not support --tool-help option to give the list
of supported backends, like "git difftool" does.
* jc/mergetool-tool-help:
mergetool: support --tool-help option like difftool does
We do not document COMMIT_EDITMSG at all, but users may want
to know about it for two reasons:
1. They may want to tell their editor to configure itself
for formatting a commit message.
2. If a commit is aborted by an error, the user may want
to recover the commit message they typed.
Let's put a note in git-commit(1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we do not have to risk the list of tools going out of sync
between the implementation and the documentation.
In the same spirit as bf73fc2 (difftool: print list of valid tools
with '--tool-help', 2012-03-29), trim the list of merge backends in
the documentation. We do not want to have a complete list of valid
tools; we only want a list to help people guess what kind of things
the tools do to be specified there, and refer them to --tool-help
for a complete list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach difftool's --dir-diff mode to use symlinks to represent
files from the working copy, and make it the default behavior
for the non-Windows platforms.
Using symlinks is simpler and safer since we do not need to
worry about copying files back into the worktree.
The old behavior is still available as --no-symlinks.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
The git-credential command requires that you feed it a
broken-down credential, which means that the client needs to
parse a URL itself. Since we have our own URL-parsing
routines, we can easily allow the caller to just give us the
URL as-is, saving them some code.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text in git-credential(1) was copied from
technical/api-credentials, so it still talks about the
input/output format as coming from git to the helper. Since
the surrounding text already indicates that this format is
used for reading and writing with git credential, we can
just remove the extraneous confusing bits.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" learned to wiggle the base version and perform three-way
merge when a patch does not exactly apply to the version you have.
* jc/apply-3way:
apply: tests for the --3way option
apply: document --3way option
apply: allow rerere() to work on --3way results
apply: register conflicted stages to the index
apply: --3way with add/add conflict
apply: move verify_index_match() higher
apply: plug the three-way merge logic in
apply: fall back on three-way merge
apply: accept -3/--3way command line option
apply: move "already exists" logic to check_to_create()
apply: move check_to_create_blob() closer to its sole caller
apply: further split load_preimage()
apply: refactor "previous patch" logic
apply: split load_preimage() helper function out
apply: factor out checkout_target() helper function
apply: refactor read_file_or_gitlink()
apply: clear_image() clears things a bit more
apply: a bit more comments on PATH_TO_BE_DELETED
apply: fix an incomplete comment in check_patch()
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
