References to commands-to-be-typed-literally in "git rebase"
documentation mark-up have been corrected.
* ds/git-rebase-doc-markup:
git-rebase.txt: use back-ticks consistently
Allow large objects read from a packstream to be streamed into a
loose object file straight, without having to keep it in-core as a
whole.
* hx/unpack-streaming:
unpack-objects: use stream_loose_object() to unpack large objects
core doc: modernize core.bigFileThreshold documentation
object-file.c: add "stream_loose_object()" to handle large object
object-file.c: factor out deflate part of write_loose_object()
object-file.c: refactor write_loose_object() to several steps
unpack-objects: low memory footprint for get_data() in dry_run mode
"git push" sometimes perform poorly when reachability bitmaps are
used, even in a repository where other operations are helped by
bitmaps. The push.useBitmaps configuration variable is introduced
to allow disabling use of reachability bitmaps only for "git push".
* zk/push-use-bitmaps:
send-pack.c: add config push.useBitmaps
A new command is introduced that takes two commits and computes a
tree that would be contained in the resulting merge commit, if the
histories leading to these two commits were to be merged, and is
added as a new mode of "git merge-tree" subcommand.
* en/merge-tree:
git-merge-tree.txt: add a section on potentional usage mistakes
merge-tree: add a --allow-unrelated-histories flag
merge-tree: allow `ls-files -u` style info to be NUL terminated
merge-ort: optionally produce machine-readable output
merge-ort: store more specific conflict information
merge-ort: make `path_messages` a strmap to a string_list
merge-ort: store messages in a list, not in a single strbuf
merge-tree: provide easy access to `ls-files -u` style info
merge-tree: provide a list of which files have conflicts
merge-ort: remove command-line-centric submodule message from merge-ort
merge-ort: provide a merge_get_conflicted_files() helper function
merge-tree: support including merge messages in output
merge-ort: split out a separate display_update_messages() function
merge-tree: implement real merges
merge-tree: add option parsing and initial shell for real merge function
merge-tree: move logic for existing merge into new function
merge-tree: rename merge_trees() to trivial_merge_trees()
Update "git diff/log --raw" format documentation.
* pb/diff-doc-raw-format:
diff-index.txt: update raw output format in examples
diff-format.txt: correct misleading wording
diff-format.txt: dst can be 0* SHA-1 when path is deleted, too
While inspecting the 'git rebase' documentation, I noticed that it is
inconsistent with how it uses back-ticks (or other punctuation) for
identifying Git commands, command-line arguments, or values for those
arguments.
Sometimes, an argument (like '--interactive') would appear without any
punctuation, causing the argument to not have any special formatting.
Other times, arguments or 'git rebase' itself would have single-quotes
giving a bold look (in the HTML documentation at least).
By consistently using back-ticks, these types of strings appear in a
monospace font with special highlighting to appear more clearly as text
that exists in a command-line invocation of a Git command.
This rather-large diff is the result of scanning git-rebase.txt and
adding back-ticks as appropriate. Some are adding back-ticks where there
was no punctuation. Others are replacing single quotes.
There are also a few minor cleanups in the process, including those
found by reviewers.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
source: <xmqq8rqn7buk.fsf_-_@gitster.g>
* jc/revert-show-parent-info:
revert: config documentation fixes
43966ab315 (revert: optionally refer to commit in the "reference"
format, 2022-05-26) added the documentation file config/revert.txt.
Actually include it in config.txt.
Make is used with a bare infinitive after the object; remove the "to".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
source: <cover-0.2-00000000000-20220615T103852Z-avarab@gmail.com>
* ab/credentials-in-url-more:
Documentation/config/transfer.txt: fix typo
Commit 7281c196b1 (transfer doc: move fetch.credentialsInUrl to
"transfer" config namespace, 2022-06-15) propagates a typo from
6dcbdc0d66 (remote: create fetch.credentialsInUrl config, 2022-06-06),
where "other" is misspelled as "oher". Fix the typo accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation explained the conversion from remote branch path to
local tracking ref path for @{push}, but not for @{upstream}.
Add the explanation to @{upstream}, and reference it in @{push} to avoid
undue repetition.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc's HTML output of the "gitrevisions" and "git-rev-parse"
documentation, the header:
The ... (three-dot) Symmetric Difference Notation
is rendered using "&8230;", a horizontal ellipsis. This is visually
ugly, but also hard to search for or cut-and-paste. We really mean three
ascii dots (0x2e) here, so let's make sure it renders as such.
The simplest way to do that is just escaping the leading dot, as the
instances in the rest of the section do. Arguably this should all be
converted to use backticks, which would let us drop the quoting here and
elsewhere (e.g., {carat}). But that does change the rendering slightly.
So let's fix the bug first, and we can decide on migrating the whole
section separately.
Note that this produces an empty doc-diff of the manpages. Curiously,
asciidoc produces the same ellipsis entity in the XML file, but docbook
then converts it back into three literal dots for the roff output! So
the roff manpages have been correct all along (which may be a reason
nobody noticed this until now).
Reported-by: Arthur Milchior
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Folks may want to merge histories that have no common ancestry; provide
a flag with the same name as used by `git merge` to allow this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much as `git ls-files` has a -z option, let's add one to merge-tree so
that the conflict-info section can be NUL terminated (and avoid quoting
of unusual filenames).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like `git merge` updates the index with information of the form
(mode, oid, stage, name)
provide this output for conflicted files for merge-tree as well.
Provide a --name-only option for users to exclude the mode, oid, and
stage and only get the list of conflicted filenames.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of `git merge-tree --write-tree` will often want to know which
files had conflicts. While they could potentially attempt to parse the
CONFLICT notices printed, those messages are not meant to be machine
readable. Provide a simpler mechanism of just printing the files (in
the same format as `git ls-files` with quoting, but restricted to
unmerged files) in the output before the free-form messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git merge-tree --write-tree`, we previously would only
return an exit status reflecting the cleanness of a merge, and print out
the toplevel tree of the resulting merge. Merges also have
informational messages, such as:
* "Auto-merging <PATH>"
* "CONFLICT (content): ..."
* "CONFLICT (file/directory)"
* etc.
In fact, when non-content conflicts occur (such as file/directory,
modify/delete, add/add with differing modes, rename/rename (1to2),
etc.), these informational messages may be the only notification the
user gets since these conflicts are not representable in the contents
of the file.
Add a --[no-]messages option so that callers can request these messages
be included at the end of the output. Include such messages by default
when there are conflicts, and omit them by default when the merge is
clean.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the ability to perform real merges rather than just trivial
merges (meaning handling three way content merges, recursive ancestor
consolidation, renames, proper directory/file conflict handling, and so
forth). However, unlike `git merge`, the working tree and index are
left alone and no branch is updated.
The only output is:
- the toplevel resulting tree printed on stdout
- exit status of 0 (clean), 1 (conflicts present), anything else
(merge could not be performed; unknown if clean or conflicted)
This output is meant to be used by some higher level script, perhaps in
a sequence of steps like this:
NEWTREE=$(git merge-tree --write-tree $BRANCH1 $BRANCH2)
test $? -eq 0 || die "There were conflicts..."
NEWCOMMIT=$(git commit-tree $NEWTREE -p $BRANCH1 -p $BRANCH2)
git update-ref $BRANCH1 $NEWCOMMIT
Note that higher level scripts may also want to access the
conflict/warning messages normally output during a merge, or have quick
access to a list of files with conflicts. That is not available in this
preliminary implementation, but subsequent commits will add that
ability (meaning that NEWTREE would be a lot more than a tree in the
case of conflicts).
This also marks the traditional trivial merge of merge-tree as
deprecated. The trivial merge not only had limited applicability, the
output format was also difficult to work with (and its format
undocumented), and will generally be less performant than real merges.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a command line option analogous to that of GNU
grep(1)'s -m / --max-count, which users might already be used to.
This makes it possible to limit the amount of matches shown in the
output while keeping the functionality of other options such as -C
(show code context) or -p (show containing function), which would be
difficult to do with a shell pipeline (e.g. head(1)).
Signed-off-by: Carlos López 00xc@protonmail.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
Reachability bitmaps are designed to speed up the "counting objects"
phase of generating a pack during a clone or fetch. They are not
optimized for Git clients sending a small topic branch via "git push".
In some cases (see [1]), using reachability bitmaps during "git push"
can cause significant performance regressions.
Add a new "push.useBitmaps" configuration variable to allow users to
tell "git push" not to use bitmaps. We already have "pack.bitmaps"
that controls the use of bitmaps, but a separate configuration variable
allows the reachability bitmaps to still be used in other areas,
such as "git upload-pack", while disabling it only for "git push".
[1]: https://lore.kernel.org/git/87zhoz8b9o.fsf@evledraar.gmail.com/
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git archive" to (optionally and then by default) avoid
spawning an external "gzip" process when creating ".tar.gz" (and
".tgz") archives.
* rs/archive-with-internal-gzip:
archive-tar: use internal gzip by default
archive-tar: use OS_CODE 3 (Unix) for internal gzip
archive-tar: add internal gzip implementation
archive-tar: factor out write_block()
archive: rename archiver data field to filter_command
archive: update format documentation
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Lowercase in manpage should use camelCase:
* Documentation/config/http.txt: http.pinnedpubkey
Lowercase in translable strings should use camelCase:
* builtin/fast-import.c: pack.indexversion
* builtin/gc.c: gc.logexpiry
* builtin/index-pack.c: pack.indexversion
* builtin/pack-objects.c: pack.indexversion
* builtin/repack.c: pack.writebitmaps
* commit.c: i18n.commitencoding
* gpg-interface.c: user.signingkey
* http.c: http.postbuffer
* submodule-config.c: submodule.fetchjobs
Mismatched camelCases, choose the former:
* Documentation/config/transfer.txt: transfer.credentialsInUrl
remote.c: transfer.credentialsInURL
[^1]: https://github.com/git-l10n/git-po-helper
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
* ab/credentials-in-url-more:
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
* ab/credentials-in-url-more:
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Adjust technical/bitmap-format to be formatted by AsciiDoc, and
add some missing information to the documentation.
* ac/bitmap-format-doc:
bitmap-format.txt: add information for trailing checksum
bitmap-format.txt: fix some formatting issues
bitmap-format.txt: feed the file to asciidoc to generate html
Bitmap file has a trailing checksum at the end of the file. However
there is no information in the bitmap-format documentation about it.
Add a trailer section to include the trailing checksum info in the
`Documentation/technical/bitmap-format.txt` file.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The asciidoc generated html for `Documentation/technical/bitmap-
format.txt` is broken. This is mainly because `-` is used for nested
lists (which is not allowed in asciidoc) instead of `*`.
Fix these and also reformat it for better readability of the html page.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/Makefile does not include bitmap-format.txt to generate
a html page using asciidoc.
Teach Documentation/Makefile to also generate a html page for
Documentation/technical/bitmap-format.txt file.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
Drop the dependency on gzip(1) and use our internal implementation to
create tar.gz and tgz files.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
