Optimize the code to dedup references recorded in a bundle file.
* kn/bundle-dedup-optim:
bundle: fix non-linear performance scaling with refs
t6020: test for duplicate refnames in bundle creation
"make perf" fixes.
* pb/perf-test-fixes:
p7821: fix instructions for testing with threads
p9210: fix 'scalar clone' when running from a detached HEAD
p7821: fix test_perf invocation for prereqs
Incorrect sorting of refs with bytes with high-bit set on platforms
with signed char led to a BUG, which has been corrected.
* ps/refname-avail-check-optim:
refs/packed: fix BUG when seeking refs with UTF-8 characters
Remove remnants of the recursive merge strategy backend, which was
superseded by the ort merge strategy.
* en/merge-recursive-debug:
builtin/{merge,rebase,revert}: remove GIT_TEST_MERGE_ALGORITHM
tests: remove GIT_TEST_MERGE_ALGORITHM and test_expect_merge_algorithm
merge-recursive.[ch]: thoroughly debug these
merge, sequencer: switch recursive merges over to ort
sequencer: switch non-recursive merges over to ort
merge-ort: enable diff-algorithms other than histogram
builtin/merge-recursive: switch to using merge_ort_generic()
checkout: replace merge_trees() with merge_ort_nonrecursive()
"git blame --porcelain" mode now talks about unblamable lines and
lines that are blamed to an ignored commit.
* kn/blame-porcelain-unblamable:
blame: print unblamable and ignored commits in porcelain mode
"git fetch [<remote>]" with only the configured fetch refspec
should be the only thing to update refs/remotes/<remote>/HEAD,
but the code was overly eager to do so in other cases.
* jk/fetch-follow-remote-head-fix:
fetch: make set_head() call easier to read
fetch: don't ask for remote HEAD if followRemoteHEAD is "never"
fetch: only respect followRemoteHEAD with configured refspecs
"git cat-file --batch" and friends learned to allow "--filter=" to
omit certain objects, just like the transport layer does.
* ps/cat-file-filter-batch:
builtin/cat-file: use bitmaps to efficiently filter by object type
builtin/cat-file: deduplicate logic to iterate over all objects
pack-bitmap: introduce function to check whether a pack is bitmapped
pack-bitmap: add function to iterate over filtered bitmapped objects
pack-bitmap: allow passing payloads to `show_reachable_fn()`
builtin/cat-file: support "object:type=" objects filter
builtin/cat-file: support "blob:limit=" objects filter
builtin/cat-file: support "blob:none" objects filter
builtin/cat-file: wire up an option to filter objects
builtin/cat-file: introduce function to report object status
builtin/cat-file: rename variable that tracks usage
"make test" used to have a hard dependency on (basic) Perl; tests
have been rewritten help environment with NO_PERL test the build as
much as possible.
* ps/test-wo-perl-prereq:
t5703: refactor test to not depend on Perl
t5316: refactor `max_chain()` to not depend on Perl
t0210: refactor trace2 scrubbing to not use Perl
t0021: refactor `generate_random_characters()` to not depend on Perl
t/lib-httpd: refactor "one-time-perl" CGI script to not depend on Perl
t/lib-t6000: refactor `name_from_description()` to not depend on Perl
t/lib-gpg: refactor `sanitize_pgp()` to not depend on Perl
t: refactor tests depending on Perl for textconv scripts
t: refactor tests depending on Perl to print data
t: refactor tests depending on Perl substitution operator
t: refactor tests depending on Perl transliteration operator
Makefile: stop requiring Perl when running tests
meson: stop requiring Perl when tests are enabled
t: adapt existing PERL prerequisites
t: introduce PERL_TEST_HELPERS prerequisite
t: adapt `test_readlink()` to not use Perl
t: adapt `test_copy_bytes()` to not use Perl
t: adapt character translation helpers to not use Perl
t: refactor environment sanitization to not use Perl
t: skip chain lint when PERL_PATH is unset
Updating multiple references have only been possible in all-or-none
fashion with transactions, but it can be more efficient to batch
multiple updates even when some of them are allowed to fail in a
best-effort manner. A new "best effort batches of updates" mode
has been introduced.
* kn/non-transactional-batch-updates:
update-ref: add --batch-updates flag for stdin mode
refs: support rejection in batch updates during F/D checks
refs: implement batch reference update support
refs: introduce enum-based transaction error types
refs/reftable: extract code from the transaction preparation
refs/files: remove duplicate duplicates check
refs: move duplicate refname update check to generic layer
refs/files: remove redundant check in split_symref_update()
"git rev-list" learns machine-parsable output format that delimits
each field with NUL.
* jt/rev-list-z:
rev-list: support NUL-delimited --missing option
rev-list: support NUL-delimited --boundary option
rev-list: support delimiting objects with NUL bytes
rev-list: refactor early option parsing
rev-list: inline `show_object_with_name()` in `show_object()`
A few traditional unit tests have been rewritten to use the clar
framework.
* sk/clar-trailer-urlmatch-norm-test:
t/unit-tests: convert urlmatch-normalization test to clar
t/unit-tests: convert trailer test to use clar
Code clean-up.
* js/comma-semicolon-confusion:
detect-compiler: detect clang even if it found CUDA
clang: warn when the comma operator is used
compat/regex: explicitly mark intentional use of the comma operator
wildmatch: avoid using of the comma operator
diff-delta: avoid using the comma operator
xdiff: avoid using the comma operator unnecessarily
clar: avoid using the comma operator unnecessarily
kwset: avoid using the comma operator unnecessarily
rebase: avoid using the comma operator unnecessarily
remote-curl: avoid using the comma operator unnecessarily
"git clone" still gave the message about the default branch name;
this message has been turned into an advice message that can be
turned off.
* jt/clone-guess-remote-head-fix:
advice: allow disabling default branch name advice
builtin/clone: suppress unexpected default branch advice
remote: allow `guess_remote_head()` to suppress advice
The job to coalesce loose objects into packfiles in "git
maintenance" now has configurable batch size.
* ds/maintenance-loose-objects-batchsize:
maintenance: add loose-objects.batchSize config
maintenance: force progress/no-quiet to children
"git reflog" learns "drop" subcommand, that discards the entire
reflog data for a ref.
* kn/reflog-drop:
reflog: implement subcommand to drop reflogs
reflog: improve error for when reflog is not found
The object layer has been updated to take an explicit repository
instance as a parameter in more code paths.
* ps/object-wo-the-repository:
hash: stop depending on `the_repository` in `null_oid()`
hash: fix "-Wsign-compare" warnings
object-file: split out logic regarding hash algorithms
delta-islands: stop depending on `the_repository`
object-file-convert: stop depending on `the_repository`
pack-bitmap-write: stop depending on `the_repository`
pack-revindex: stop depending on `the_repository`
pack-check: stop depending on `the_repository`
environment: move access to "core.bigFileThreshold" into repo settings
pack-write: stop depending on `the_repository` and `the_hash_algo`
object: stop depending on `the_repository`
csum-file: stop depending on `the_repository`
Fix our use of zlib corner cases.
* jk/zlib-inflate-fixes:
unpack_loose_rest(): rewrite return handling for clarity
unpack_loose_rest(): simplify error handling
unpack_loose_rest(): never clean up zstream
unpack_loose_rest(): avoid numeric comparison of zlib status
unpack_loose_header(): avoid numeric comparison of zlib status
git_inflate(): skip zlib_post_call() sanity check on Z_NEED_DICT
unpack_loose_header(): fix infinite loop on broken zlib input
unpack_loose_header(): report headers without NUL as "bad"
unpack_loose_header(): simplify next_out assignment
loose_object_info(): BUG() on inflating content with unknown type
In 7b31b55db1 (perf: amend the grep tests to test grep.threads,
2017-12-29), p7821 was tweaked to test the performance of 'git grep'
under different number of threads. These tests are run if
GIT_PERF_GREP_THREADS is set to a list of thread numbers, but the
comment at the top of the file instead mentions GIT_PERF_7821_THREADS.
Fix the comment.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported that using git-pull(1) in a repository whose remote
contains branches with emojis leads to the following bug:
$ git pull
remote: Enumerating objects: 161255, done.
remote: Counting objects: 100% (55884/55884), done.
remote: Compressing objects: 100% (5518/5518), done.
remote: Total 161255 (delta 54253), reused 50509 (delta 50364),
pack-reused 105371 (from 4)
Receiving objects: 100% (161255/161255), 309.90 MiB | 16.87 MiB/s, done.
Resolving deltas: 100% (118048/118048), completed with 13416 local objects.
From github.com:github/github
97ab7ae3f3745..8fb2f9fa180ed master -> origin/master
[...snip many screenfuls of updates to origin remotes...]
BUG: refs/packed-backend.c:984: packed-refs backend yielded reference
preceding its prefix
error: fetch died of signal 6
This issue bisects to 22600c0452 (refs/iterator: implement seeking for
packed-ref iterators, 2025-03-12) where we have implemented seeking for
the packed-ref iterator. As part of that change we introduced a check
that verifies that the iterator only returns refnames bigger than the
prefix. In theory, this check should always hold: when a prefix is set
we know that we would've seeked that prefix first, so we should never
see a reference sorting before that prefix.
But in practice the check itself is misbehaving when handling unicode
characters. The particular issue triggered with a branch that got the
"shaved ice" unicode character in its name, which is composed of the
bytes "0xEE 0x90 0xBF". The bug triggers when we compare the refname
"refs/heads/<shaved-ice>" to something like "refs/heads/z", and it
specifically hits when comparing the first byte, "0xEE".
The root cause is that the most-significant bit of 0xEE is set. The
`refname` and `prefix` pointers that we use to compare bytes with one
another are both pointers to signed characters. As such, when we
dereference the 0xEE byte the result is a _negative_ value, and this
value will of course compare smaller than "z".
We can see that this issue is avoided in `cmp_packed_refname()`, where
we explicitly cast each byte to its unsigned form. Fix the bug by doing
the same in `packed_ref_iterator_advance()`.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we already teach the `repo_config()` in f29f1990 (config:
teach repo_config to allow `repo` to be NULL, 2025-03-08) to allow
`repo` to be NULL, no need to check if `repo` is NULL before calling
`repo_config()`.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git bundle create' command has non-linear performance with the
number of refs in the repository. Benchmarking the command shows that
a large portion of the time (~75%) is spent in the
`object_array_remove_duplicates()` function.
The `object_array_remove_duplicates()` function was added in
b2a6d1c686 (bundle: allow the same ref to be given more than once,
2009-01-17) to skip duplicate refs provided by the user from being
written to the bundle. Since this is an O(N^2) algorithm, in repos with
large number of references, this can take up a large amount of time.
Let's instead use a 'strset' to skip duplicates inside
`write_bundle_refs()`. This improves the performance by around 6 times
when tested against in repository with 100000 refs:
Benchmark 1: bundle (refcount = 100000, revision = master)
Time (mean ± σ): 14.653 s ± 0.203 s [User: 13.940 s, System: 0.762 s]
Range (min … max): 14.237 s … 14.920 s 10 runs
Benchmark 2: bundle (refcount = 100000, revision = HEAD)
Time (mean ± σ): 2.394 s ± 0.023 s [User: 1.684 s, System: 0.798 s]
Range (min … max): 2.364 s … 2.425 s 10 runs
Summary
bundle (refcount = 100000, revision = HEAD) ran
6.12 ± 0.10 times faster than bundle (refcount = 100000, revision = master)
Previously, `object_array_remove_duplicates()` ensured that both the
refname and the object it pointed to were checked for duplicates. The
new approach, implemented within `write_bundle_refs()`, eliminates
duplicate refnames without comparing the objects they reference. This
works because, for bundle creation, we only need to prevent duplicate
refs from being written to the bundle header. The `revs->pending` array
can contain duplicates of multiple types.
First, references which resolve to the same refname. For e.g. "git
bundle create out.bdl master master" or "git bundle create out.bdl
refs/heads/master refs/heads/master" or "git bundle create out.bdl
master refs/heads/master". In these scenarios we want to prevent writing
"refs/heads/master" twice to the bundle header. Since both the refnames
here would point to the same object (unless there is a race), we do not
need to check equality of the object.
Second, refnames which are duplicates but do not point to the same
object. This can happen when we use an exclusion criteria. For e.g. "git
bundle create out.bdl master master^!", Here `revs->pending` would
contain two elements, both with refname set to "master". However, each
of them would be pointing to an INTERESTING and UNINTERESTING object
respectively. Since we only write refnames with INTERESTING objects to
the bundle header, we perform our duplicate checks only on such objects.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit b2a6d1c686 (bundle: allow the same ref to be given more than
once, 2009-01-17) added functionality to detect and remove duplicate
refnames from being added during bundle creation. This ensured that
clones created from such bundles wouldn't barf about duplicate refnames.
The following commit will add some optimizations to make this check
faster, but before doing that, it would be optimal to add tests to
capture the current behavior.
Add tests to capture duplicate refnames provided by the user during
bundle creation. This can be a combination of:
- refnames directly provided by the user.
- refname duplicate by using the '--all' flag alongside manual
references being provided.
- exclusion criteria provided via a refname "main^!".
- short forms of refnames provided, "main" vs "refs/heads/main".
Note that currently duplicates due to usage of short and long forms goes
undetected. This should be fixed with the optimizations made in the next
commit.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both of these existed to allow us to reuse all the merge-related tests
in the testsuite while easily flipping between the 'recursive' and the
'ort' backends. Now that we have removed merge-recursive and remapped
'recursive' to mean 'ort', we don't need this scaffolding anymore.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More precisely, replace calls to merge_recursive() with
merge_ort_recursive().
Also change t7615 to quit calling out recursive; it is not needed
anymore, and we are in fact using ort now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from merge-recursive to merge-ort. Adjust the following
testcases due to the switch:
* t6430: most of the test differences here were due to improved D/F
conflict handling explained in more detail in ef52778708 (merge
tests: expect improved directory/file conflict handling in ort,
2020-10-26). These changes weren't made to this test back in that
commit simply because I had been looking at `git merge` rather than
`git merge-recursive`. The final test in this testsuite, though, was
expunged because it was looking for specific output, and the calls to
output_commit_title() were discarded from merge_ort_internal() in its
adaptation from merge_recursive_internal(); see 8119214f4e
(merge-ort: implement merge_incore_recursive(), 2020-12-16).
* t6434: This test is built entirely around rename/delete conflicts,
which had a suboptimal handling under merge-recursive. As explained
in more detail in commits 1f3c9ba707 ("t6425: be more flexible with
rename/delete conflict messages", 2020-08-10) and 727c75b23f ("t6404,
t6423: expect improved rename/delete handling in ort backend",
2020-10-26), rename/delete conflicts should each have two entries in
the index rather than just one. Adjust the expectations for all the
tests in this testcase to see the two entries per rename/delete
conflict.
* t6424: merge-recursive had a special check-if-toplevel-trees-match
check that it ran at the beginning on both the merge-base and the
other side being merged in. In such a case, it exited early and
printed an "Already up to date." message. merge-ort got rid of
this, and instead checks the merge base tree matching the other
side throughout the tree instead of just at the toplevel, allowing
it to avoid recursing into various subtrees. As part of that, it
got rid of the specialty toplevel message. That message hasn't
been missed for years from `git merge`, so I don't think it is
necessary to keep it just for `git merge-recursive`, especially
since the latter is rarely used. (git itself only references it
in the testsuite, whereas it used to power one of the three
rebase backends that existed once upon a time.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Incrementally updating multi-pack index files.
* tb/incremental-midx-part-2:
midx: implement writing incremental MIDX bitmaps
pack-bitmap.c: use `ewah_or_iterator` for type bitmap iterators
pack-bitmap.c: keep track of each layer's type bitmaps
ewah: implement `struct ewah_or_iterator`
pack-bitmap.c: apply pseudo-merge commits with incremental MIDXs
pack-bitmap.c: compute disk-usage with incremental MIDXs
pack-bitmap.c: teach `rev-list --test-bitmap` about incremental MIDXs
pack-bitmap.c: support bitmap pack-reuse with incremental MIDXs
pack-bitmap.c: teach `show_objects_for_type()` about incremental MIDXs
pack-bitmap.c: teach `bitmap_for_commit()` about incremental MIDXs
pack-bitmap.c: open and store incremental bitmap layers
pack-revindex: prepare for incremental MIDX bitmaps
Documentation: describe incremental MIDX bitmaps
Documentation: remove a "future work" item from the MIDX docs
Make the code in reftable library less reliant on the service
routines it used to borrow from Git proper, to make it easier to
use by external users of the library.
* ps/reftable-sans-compat-util:
Makefile: skip reftable library for Coccinelle
reftable: decouple from Git codebase by pulling in "compat/posix.h"
git-compat-util.h: split out POSIX-emulating bits
compat/mingw: split out POSIX-related bits
reftable/basics: introduce `REFTABLE_UNUSED` annotation
reftable/basics: stop using `SWAP()` macro
reftable/stack: stop using `sleep_millisec()`
reftable/system: introduce `reftable_rand()`
reftable/reader: stop using `ARRAY_SIZE()` macro
reftable/basics: provide wrappers for big endian conversion
reftable/basics: stop using `st_mult()` in array allocators
reftable: stop using `BUG()` in trivial cases
reftable/record: don't `BUG()` in `reftable_record_cmp()`
reftable/record: stop using `BUG()` in `reftable_record_init()`
reftable/record: stop using `COPY_ARRAY()`
reftable/blocksource: stop using `xmmap()`
reftable/stack: stop using `write_in_full()`
reftable/stack: stop using `read_in_full()`
When updating multiple references through stdin, Git's update-ref
command normally aborts the entire transaction if any single update
fails. This atomic behavior prevents partial updates. Introduce a new
batch update system, where the updates the performed together similar
but individual updates are allowed to fail.
Add a new `--batch-updates` flag that allows the transaction to continue
even when individual reference updates fail. This flag can only be used
in `--stdin` mode and builds upon the batch update support added to the
refs subsystem in the previous commits. When enabled, failed updates are
reported in the following format:
rejected SP (<old-oid> | <old-target>) SP (<new-oid> | <new-target>) SP <rejection-reason> LF
Update the documentation to reflect this change and also tests to cover
different scenarios where an update could be rejected.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git-maintenance(1) uses the "gc" task to ensure that the
repository is well-maintained. This can be changed, for example by
either explicitly configuring which tasks should be enabled or by using
the "incremental" maintenance strategy. If so, git-maintenance(1) does
not know to expire reflog entries, which is a subtask that git-gc(1)
knows to perform for the user. Consequently, the reflog will grow
indefinitely unless the user manually trims it.
Introduce a new "reflog-expire" task that plugs this gap:
- When running the task directly, then we simply execute `git reflog
expire --all`, which is the same as git-gc(1).
- When running git-maintenance(1) with the `--auto` flag, then we only
run the task in case the "HEAD" reflog has at least N reflog entries
that would be discarded. By default, N is set to 100, but this can
be configured via "maintenance.reflog-expire.auto". When a negative
integer has been provided we always expire entries, zero causes us
to never expire entries, and a positive value specifies how many
entries need to exist before we consider pruning the entries.
Note that the condition for the `--auto` flags is merely a heuristic and
optimized for being fast. This is because `git maintenance run --auto`
will be executed quite regularly, so scanning through all reflogs would
likely be too expensive in many repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git-blame(1)' command allows users to ignore specific revisions via
the '--ignore-rev <rev>' and '--ignore-revs-file <file>' flags. These
flags are often combined with the 'blame.markIgnoredLines' and
'blame.markUnblamableLines' config options. These config options prefix
ignored and unblamable lines with a '?' and '*', respectively.
However, this option was never extended to the porcelain mode of
'git-blame(1)'. Since the documentation does not indicate this
exclusion, it is a bug.
Fix this by printing 'ignored' and 'unblamable' respectively for the
options when using the porcelain modes.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Toon Claes <toon@iotcl.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use Perl due to two different reasons in t5703:
- To filter advertised capabilities.
- To set up a CGI script with HTTPD.
Refactor the first category to use `test_grep` instead. Refactoring the
second category would be a bit more involved, so instead we add the
PERL_TEST_HELPERS prerequisite to those individual tests now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `max_chain()` helper function is used to extract the maximum delta
chain of a packfile as printed by git-index-pack(1). The script uses
Perl to extract that data, but it can be trivially refactored to use
awk(1) instead.
Refactor the helper accordingly so that we can drop a couple of
PERL_TEST_HELPERS prerequisites.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output generated by our trace2 mechanism contains several fields
that are dependent on the environment they're being run in, which makes
it somewhat harder to test it. As a countermeasure we scrub the output
and strip out any fields that contain such information.
The logic to do so is implemented in Perl, but it can be trivially
ported to instead use sed(1). Refactor the code accordingly so that we
can drop the PERL_TEST_HELPERS prerequisite.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `generate_random_characters()` helper function generates N
random characters in the range 'a-z' and writes them into a file. The
logic currently uses Perl, but it can be adapted rather easily by:
- Making `test-tool genrandom` generate an infinite stream.
- Using `tr -dc` to strip all characters which aren't in the range of
'a-z'.
- Using `test_copy_bytes()` to copy the first N bytes.
This allows us to drop the PERL_TEST_HELPERS prerequisite.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our Apache HTTPD setup exposes an "one_time_perl" endpoint to access
repositories. If used, we execute the "apply-one-time-perl.sh" CGI
script that checks whether we have a "one-time-perl" script. If so, that
script gets executed so that it can munge what would be served. Once
done, the script gets removed so that it doesn't execute a second time.
As the name says, this functionality expects the user to pass a Perl
script. This isn't really necessary though: we can just as easily
implement the same thing with arbitrary scripts.
Refactor the code so that we instead expect an arbitrary script to
exist and rename the functionality to "one-time-script". Adapt callers
to use shell utilities instead of Perl so that we can drop the
PERL_TEST_HELPERS prerequisite.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `name_from_description()` test helper uses Perl to munge a given
description and convert it into a name. Refactor it to instead use a
combination of sed(1) and tr(1) so that we drop PERL_TEST_HELPERS
prerequisites in users of this library.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `sanitize_pgp()` test helper uses Perl to strip PGP signatures from
stdin. Refactor it to instead use sed(1) so that we drop the
PERL_TEST_HELPERS prerequisite in users of this library.
Note that we have to add PERL_TEST_HELPERS to a subset of tests in t6300
now that the test suite doesn't bail out early anymore in case the
prerequisite isn't set.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a couple of tests that depend on Perl for textconv scripts.
Refactor these tests to instead be implemented via shell utilities so
that we can drop a couple of PERL_TEST_HELPERS prerequisites.
Note that the conversion in t4030 is not a one-to-one equivalent to the
previous textconv script. Before this change we used to essentially do a
hexdump via Perl. The obvious conversion here would be to use `test-tool
hexdump` like we do for the other tests. But this would lead to a ripple
effect where we would have to adapt a bunch of other tests with a bunch
of seemingly unrelated changes, which would be somewhat awkward.
Instead, we're going with the minimum viable change: the test files we
write contain "\001" and "\000", and the test's expectation is that
those get translated into proper ASCII characters. So instead of doing a
full hexdump, we simply use tr(1) to translate these specific bytes.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bunch of tests rely on Perl to print data in various different ways.
These usages fall into the following categories:
- Print data conditionally by matching patterns. These usecases can be
converted to use awk(1) rather easily.
- Print data repeatedly. These usecases can typically be converted to
use a combination of `test-tool genzeros` and sed(1).
- Print data in reverse. These usecases can be converted to use
awk(1) or `sort -r`.
Refactor the tests accordingly so that we can drop a couple of
PERL_TEST_HELPERS prerequisites.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a bunch of tests that use Perl to perform substitution via the
"s/" operator. These usecases can be trivially replaced with sed(1) and
tr(1).
Refactor the tests accordingly so that we can drop a couple of
PERL_TEST_HELPERS prerequisites.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a bunch of tests that use Perl to perform character
transliteration via the "y/" or "tr/" operator. These usecases can be
trivially replaced with tr(1).
Refactor the tests accordingly so that we can drop a couple of
PERL_TEST_HELPERS prerequisites.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile for our tests has a couple of targets that depend on Perl.
Adapt those targets to only run conditionally in case Perl is available
on the system so that it becomes possible to run the test suite without
Perl.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of our tests depend on the PERL prerequisite even though it
isn't needed. These tests fall into one of the following classes:
- The underlying logic used to be implemented in Perl but isn't
anymore. Here we can simply drop the dependency altogether.
- The test logic used to depend on Perl but doesn't anymore. Again, we
can simply drop the dependency.
- The test logic still relies on a Perl interpreter. These tests
should use the newly introduced PERL_TEST_HELPERS prerequisite.
Adapt test cases accordingly.
Note that in t1006 we have to introduce another new prerequisite
depending on whether or not the IPC::Open2 module is available. Funny
enough, when starting to use `test_lazy_prereq` to do so we also get a
conflict of variables with the "script" variable that contains the Perl
logic because `test_run_lazy_prereq_` also sets that variable. We thus
rename the variable in t1006 to "perl_script".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the early days of Git, Perl was used quite prominently throughout the
project. This has changed significantly as almost all of the executables
we ship nowadays have eventually been rewritten in C. Only a handful of
subsystems remain that require Perl:
- gitweb, a read-only web interface.
- A couple of scripts that allow importing repositories from GNU Arch,
CVS and Subversion.
- git-send-email(1), which can be used to send mails.
- git-request-pull(1), which is used to request somebody to pull from
a URL by sending an email.
- git-filter-branch(1), which uses Perl with the `--state-branch`
option. This command is typically recommended against nowadays in
favor of git-filter-repo(1).
- Our Perl bindings for Git.
- The netrc Git credential helper.
None of these subsystems can really be considered to be part of the
"core" of Git, and an installation without them is fully functional.
It is more likely than not that an end user wouldn't even notice that
any features are missing if those tools weren't installed. But while
Perl nowadays very much is an optional dependency of Git, there is a
significant limitation when Perl isn't available: developers cannot run
our test suite.
Preceding commits have started to lift this restriction by removing the
strict dependency on Perl in many central parts of the test library. But
there are still many tests that rely on small Perl helpers to do various
different things.
Introduce a new PERL_TEST_HELPERS prerequisite that guards all tests
that require Perl. This prerequisite is explicitly different than the
preexisting PERL prerequisite:
- PERL records whether or not features depending on the Perl
interpreter are built.
- PERL_TEST_HELPERS records whether or not a Perl interpreter is
available for our tests.
By having these two separate prerequisites we can thus distinguish
between tests that inherently depend on Perl because the underlying
feature does, and those tests that depend on Perl because the test
itself is using Perl.
Adapt all tests to set the PERL_TEST_HELPERS prerequisite as needed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
