This test sets the t0021/rot13-filter.pl script as a long-running
process filter for a git checkout command. It then expects the filter to
fail producing a specific error message at stderr. In the following
commits we are going to replace the script with a C test-tool helper,
but the test currently expects the error message in a Perl-specific
format. That is, when you call `die <msg>` in Perl, it emits
"<msg> at - line 1." In preparation for the conversion, let's avoid the
Perl-specific part and only grep for <msg> itself.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
At the end of `git checkout <pathspec>`, we get a message informing how
many entries were updated in the working tree. However, this number can
be inaccurate for two reasons:
1) Delayed entries currently get counted twice.
2) Failed entries are included in the count.
The first problem happens because the counter is first incremented
before inserting the entry in the delayed checkout queue, and once again
when finish_delayed_checkout() calls checkout_entry(). And the second
happens because the counter is incremented too early in
checkout_entry(), before the entry was in fact checked out. Fix that by
moving the count increment further down in the call stack and removing
the duplicate increment on delayed entries. Note that we have to keep
a per-entry reference for the counter (both on parallel checkout and
delayed checkout) because not all entries are always accumulated at the
same counter. See checkout_worktree(), at builtin/checkout.c for an
example.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After checkout, git usually reports how many entries were updated at
that operation. However, because we count the entries too soon during
the checkout process, we may actually include entries that do not get
properly checked out in the end. This can lead to an inaccurate final
report if the user expects it to show only the *successful* updates.
This will be fixed in the next commit, but for now let's document it
with a test that cover all checkout modes.
Note that `test_checkout_workers` have to be slightly adjusted in order
to use the construct `test_checkout_workers ... test_must_fail git
checkout`. The function runs the command given to it with an assignment
prefix to set the GIT_TRACE2 variable. However, this this assignment has
an undefined behavior when the command is a shell function (like
`test_must_fail`). As POSIX specifies:
If the command name is a function that is not a standard utility
implemented as a function, variable assignments shall affect the
current execution environment during the execution of the function. It
is unspecified:
- Whether or not the variable assignments persist after the
completion of the function
- Whether or not the variables gain the export attribute during the
execution of the function
Thus, in order to make sure the GIT_TRACE2 value gets visible to the git
command executed by `test_must_fail`, export the variable and run git in
a subshell.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html
(Vol. 3: Shell and Utilities, Section 2.9.1: Simple Commands)
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of a `git checkout <pathspec>` operation, git reports how
many paths were checked out with a message like "Updated N paths from
the index". However, entries that end up on the delayed checkout queue
(as requested by a long-running process filter) get counted twice,
producing a wrong number in the final report. We will fix this bug in an
upcoming commit. For now, only document/demonstrate it with a
test_expect_failure.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite of "git add -i" in C that appeared in Git 2.25 didn't
correctly record a removed file to the index, which is an old
regression but has become widely known because the C version
has become the default in the latest release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.4
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.34:
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.33:
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.32:
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.31:
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.30:
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
Bash command line prompt (in contrib/) update.
* jp/prompt-clear-before-upstream-mark:
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
* ab/credentials-in-url-more:
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Improve test coverage with a handful of tests.
* ds/more-test-coverage:
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
The code added 0cc05b044f (usage.c: add a non-fatal bug() function to go
with BUG(), 2022-06-02) sets up two va_list variables: one to output to
stderr, and one to trace2. But the order of initialization is wrong:
va_list ap, cp;
va_copy(cp, ap);
va_start(ap, fmt);
We copy the contents of "ap" into "cp" before it is initialized, meaning
it is full of garbage. The two should be swapped.
However, there's another bug, noticed by Johannes Schindelin: we forget
to call va_end() for the copy. So instead of just fixing the copy's
initialization, let's do two separate start/end pairs. This is allowed
by the standard, and we don't need to use copy here since we have access
to the original varargs. Matching the pairs with the calls makes it more
obvious that everything is being done correctly.
Note that we do call bug_fl() in the tests, but it didn't trigger this
problem because our format string doesn't have any placeholders. So even
though we were passing a garbage va_list through the stack, nobody ever
needed to look at it. We can easily adjust one of the trace2 tests to
trigger this, both for bug() and for BUG(). The latter isn't broken, but
it's nice to exercise both a bit more. Without the fix in this patch
(but with the test change), the bug() case causes a segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a 'git repack --cruft -d' with the wrapper 'git gc --cruft' to
exercise some logic in builtin/gc.c that adds the '--cruft' option to
the underlying 'git repack' command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--verbose' option reports what is being added and removed from the
index, but has not been tested up to this point. Augment the tests in
t2107 to check the '--verbose' option in some scenarios.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5dccd9155f (t/perf: add iteration setup mechanism to perf-lib,
2022-04-04) modified the parameter parsing of test_wrapper() such that
the test title was no longer in $1, and is instead in $test_title_.
We correctly pass the new variable to the code which outputs the title
to the log, but missed the spot in test_wrapper() where the title is
written to the ".descr" file which is used to produce the final output
table. As a result, all of the titles are missing from that table (or
worse, using whatever was left in $1):
$ ./p0000-perf-lib-sanity.sh
[...]
Test this tree
------------------------------
0000.1: 0.01(0.01+0.00)
0000.2: 0.01(0.00+0.01)
0000.4: 0.00(0.00+0.00)
0000.5: true 0.00(0.00+0.00)
0000.7: 0.00(0.00+0.00)
0000.8: 0.00(0.00+0.00)
After this patch, we get the pre-5dccd9155f output:
Test this tree
--------------------------------------------------------------------------
0000.1: test_perf_default_repo works 0.00(0.00+0.00)
0000.2: test_checkout_worktree works 0.01(0.00+0.01)
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
0000.8: test-lib-functions correctly loaded in subshells 0.00(0.00+0.00)
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
Add and use a LIBCURL prerequisite for tests added in
6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789 (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "fetch.credentialsInUrl" configuration variable introduced
in 6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06) to "transfer".
There are existing exceptions, but generally speaking the
"<namespace>.<var>" configuration should only apply to command
described in the "namespace" (and its sub-commands, so e.g. "clone.*"
or "fetch.*" might also configure "git-remote-https").
But in the case of "fetch.credentialsInUrl" we've got a configuration
variable that configures the behavior of all of "clone", "push" and
"fetch", someone adjusting "fetch.*" configuration won't expect to
have the behavior of "git push" altered, especially as we have the
pre-existing "{transfer,fetch,receive}.fsckObjects", which configures
different parts of the transfer dialog.
So let's move this configuration variable to the "transfer" namespace
before it's exposed in a release. We could add all of
"{transfer,fetch,pull}.credentialsInUrl" at some other time, but once
we have "fetch" configure "pull" such an arrangement would would be a
confusing mess, as we'd at least need to have "fetch" configure
"push" (but not the other way around), or change existing behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue that existed before 0527ccb1b5 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc8 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0 (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Test Summary Report
-------------------
./t3701-add-interactive.sh (Wstat: 0 Tests: 70 Failed: 0)
TODO passed: 45, 47
Files=1, Tests=70, 2 wallclock secs ( 0.03 usr 0.00 sys + 0.86 cusr 0.33 csys = 1.22 CPU)
Result: PASS
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b5 with a
new "ADD_I_USE_BUILTIN" prerequisite.
1. https://lore.kernel.org/git/patch-1.7-4624abc2591-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "fetch.credentialsInUrl" configuration variable controls what
happens when a URL with embedded login credential is used.
* ds/credentials-in-url:
remote: create fetch.credentialsInUrl config
Updating the graft information invalidates the list of parents of
in-core commit objects that used to be in the graft file.
* jt/unparse-commit-upon-graft-change:
commit,shallow: unparse commits if grafts changed
In Git 2.36 we revamped the way how hooks are invoked. One change
that is end-user visible is that the output of a hook is no longer
directly connected to the standard output of "git" that spawns the
hook, which was noticed post release. This is getting corrected.
* ab/hooks-regression-fix:
hook API: fix v2.36.0 regression: hooks should be connected to a TTY
run-command: add an "ungroup" option to run_process_parallel()
"git -c diff.submodule=log range-diff" did not show anything for
submodules that changed in the ranges being compared, and
"git -c diff.submodule=diff range-diff" did not work correctly.
Fix this by including the "--submodule=short" output
unconditionally to be compared.
* pb/range-diff-with-submodule:
range-diff: show submodule changes irrespective of diff.submodule
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
A misconfigured 'branch..remote' led to a bug in configuration
parsing.
* gc/zero-length-branch-config-fix:
remote.c: reject 0-length branch names
remote.c: don't BUG() on 0-length branch names
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
Because of the wrapping of the branch name variable $b, the colour codes
in the variable don't get applied, but are instead printed directly in
the output. Move the wrapping of $b to before colour codes are inserted
to correct this. Revert move of branch name colour codes in tests, as
the branch name is now coloured after the wrapping instead of before.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
source: <20220421044233.894255-1-alexhenrie24@gmail.com>
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
Avoid problems from interaction between malloc_check and address
sanitizer.
source: <pull.1210.git.1649507317350.gitgitgadget@gmail.com>
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
The commit summary shown after making a commit is matched to what
is given in "git status" not to use the break-rewrite heuristics.
source: <c35bd0aa-2e46-e710-2b39-89f18bad0097@web.de>
* rs/commit-summary-wo-break-rewrite:
commit, sequencer: turn off break_opt for commit summary
A bit of test framework fixes with a few fixes to issues found by
valgrind.
source: <20220512223218.237544-1-gitster@pobox.com>
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
source: <xmqqh76mf7s4.fsf_-_@gitster.g>
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
Test that "git config --show-scope" shows the "worktree" scope, and add
it to the list of scopes in Documentation/git-config.txt.
"git config --help" does not need to be updated because it already
mentions "worktree".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A git subcommand like "git add -p" spawns a separate git process
while relaying its command line arguments. A pathspec with only
negative elements was mistakenly passed with an empty string, which
has been corrected.
* jc/all-negative-pathspec:
pathspec: correct an empty string used as a pathspec element
Implementation of "scalar diagnose" subcommand.
* js/scalar-diagnose:
scalar: teach `diagnose` to gather loose objects information
scalar: teach `diagnose` to gather packfile info
scalar diagnose: include disk space information
scalar: implement `scalar diagnose`
scalar: validate the optional enlistment argument
archive --add-virtual-file: allow paths containing colons
archive: optionally add "virtual" files
Update the GitHub workflow support to make it quicker to get to the
failing test.
* js/ci-github-workflow-markup:
ci: call `finalize_test_case_output` a little later
ci(github): mention where the full logs can be found
ci: use `--github-workflow-markup` in the GitHub workflow
ci(github): avoid printing test case preamble twice
ci(github): skip the logs of the successful test cases
ci: optionally mark up output in the GitHub workflow
ci/run-build-and-tests: add some structure to the GitHub workflow output
ci: make it easier to find failed tests' logs in the GitHub workflow
ci/run-build-and-tests: take a more high-level view
test(junit): avoid line feeds in XML attributes
tests: refactor --write-junit-xml code
ci: fix code style
