The code to compute the commit-graph has been taught to use a more
robust way to tell if two object directories refer to the same
thing.
* tb/commit-graph-object-dir:
commit-graph.h: use odb in 'load_commit_graph_one_fd_st'
commit-graph.c: remove path normalization, comparison
commit-graph.h: store object directory in 'struct commit_graph'
commit-graph.h: store an odb in 'struct write_commit_graph_context'
t5318: don't pass non-object directory to '--object-dir'
The index-pack code now diagnoses a bad input packstream that
records the same object twice when it is used as delta base; the
code used to declare a software bug when encountering such an
input, but it is an input error.
* jk/index-pack-dupfix:
index-pack: downgrade twice-resolved REF_DELTA to die()
The code to automatically shrink the fan-out in the notes tree had
an off-by-one bug, which has been killed.
* jh/notes-fanout-fix:
notes.c: fix off-by-one error when decreasing notes fanout
t3305: check notes fanout more carefully and robustly
The way "git submodule status" reports an initialized but not yet
populated submodule has not been reimplemented correctly when a
part of the "git submodule" command was rewritten in C, which has
been corrected.
* pk/status-of-uncloned-submodule:
t7400: testcase for submodule status on unregistered inner git repos
submodule: fix status of initialized but not cloned submodules
t7400: add a testcase for submodule status on empty dirs
The diff-* plumbing family of subcommands now pay attention to the
diff.wsErrorHighlight configuration, which has been ignored before;
this allows "git add -p" to also show the whitespace problems to
the end user.
* jk/diff-honor-wserrhighlight-in-plumbing:
diff: move diff.wsErrorHighlight to "basic" config
Some rough edges in the sparse-checkout feature, especially around
the cone mode, have been cleaned up.
* ds/sparse-checkout-harden:
sparse-checkout: fix cone mode behavior mismatch
sparse-checkout: improve docs around 'set' in cone mode
sparse-checkout: escape all glob characters on write
sparse-checkout: use C-style quotes in 'list' subcommand
sparse-checkout: unquote C-style strings over --stdin
sparse-checkout: write escaped patterns in cone mode
sparse-checkout: properly match escaped characters
sparse-checkout: warn on globs in cone patterns
sparse-checkout: detect short patterns
sparse-checkout: cone mode does not recognize "**"
sparse-checkout: fix documentation typo for core.sparseCheckoutCone
clone: fix --sparse option with URLs
sparse-checkout: create leading directories
t1091: improve here-docs
t1091: use check_files to reduce boilerplate
A low-level API function get_oid(), that accepts various ways to
name an object, used to issue end-user facing error messages
without l10n, which has been updated to be translatable.
* jk/get-oid-error-message-i18n:
sha1-name: mark get_oid() error messages for translation
t1506: drop space after redirection operator
t1400: avoid "test" string comparisons
Allow the rebase.missingCommitsCheck configuration to kick in when
"rebase --edit-todo" and "rebase --continue" restarts the procedure.
* ag/edit-todo-drop-check:
rebase-interactive: warn if commit is dropped with `rebase --edit-todo'
sequencer: move check_todo_list_from_file() to rebase-interactive.c
Test updates.
* dl/test-must-fail-fixes-2:
t4124: only mark git command with test_must_fail
t3507: use test_path_is_missing()
t3507: fix indentation
t3504: do check for conflict marker after failed cherry-pick
t3419: stop losing return code of git command
t3415: increase granularity of test_auto_{fixup,squash}()
t3415: stop losing return codes of git commands
t3310: extract common notes_merge_files_gone()
t3030: use test_path_is_missing()
t2018: replace "sha" with "oid"
t2018: don't lose return code of git commands
t2018: teach do_checkout() to accept `!` arg
t2018: be more discerning when checking for expected exit codes
t2018: improve style of if-statement
t2018: add space between function name and ()
t2018: remove trailing space from test description
"git rebase -i" identifies existing commits in its todo file with
their abbreviated object name, which could become ambigous as it
goes to create new commits, and has a mechanism to avoid ambiguity
in the main part of its execution. A few other cases however were
not covered by the protection against ambiguity, which has been
corrected.
* js/rebase-i-with-colliding-hash:
rebase -i: also avoid SHA-1 collisions with missingCommitsCheck
rebase -i: re-fix short SHA-1 collision
parse_insn_line(): improve error message when parsing failed
A new version of fsmonitor-watchman hook has been introduced, to
avoid races.
* kw/fsmonitor-watchman-racefix:
fsmonitor: update documentation for hook version and watchman hooks
fsmonitor: add fsmonitor hook scripts for version 2
fsmonitor: handle version 2 of the hooks that will use opaque token
fsmonitor: change last update timestamp on the index_state to opaque token
The transport protocol version 2 becomes the default one.
* jn/promote-proto2-to-default:
fetch: default to protocol version 2
protocol test: let protocol.version override GIT_TEST_PROTOCOL_VERSION
test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate
config doc: protocol.version is not experimental
fetch test: use more robust test for filtered objects
Two help messages given when "git add" notices the user gave it
nothing to add have been updated to use advise() API.
* hw/advice-add-nothing:
add: change advice config variables used by the add API
add: use advise function to display hints
"git grep --no-index" should not get affected by the contents of
the .gitmodules file but when "--recurse-submodules" is given or
the "submodule.recurse" variable is set, it did. Now these
settings are ignored in the "--no-index" mode.
* pb/do-not-recurse-grep-no-index:
grep: ignore --recurse-submodules if --no-index is given
Running "git rm" on a submodule failed unnecessarily when
.gitmodules is only cache-dirty, which has been corrected.
* dt/submodule-rm-with-stale-cache:
git rm submodule: succeed if .gitmodules index stat info is zero
Disambiguation logic to tell revisions and pathspec apart has been
tweaked so that backslash-escaped glob special characters do not
count in the "wildcards are pathspec" rule.
* jk/escaped-wildcard-dwim:
verify_filename(): handle backslashes in "wildcards are pathspecs" rule
advice.addNothing config variable is used to control the visibility of
two advice messages in the add library. This config variable is
replaced by two new variables, whose names are more clear and relevant
to the two cases.
Also add the two new variables to the documentation.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--recurse-submodules" option of various subcommands did not
work well when run in an alternate worktree, which has been
corrected.
* pb/recurse-submodule-in-worktree-fix:
submodule.c: use get_git_dir() instead of get_git_common_dir()
t2405: clarify test descriptions and simplify test
t2405: use git -C and test_commit -C instead of subshells
t7410: rename to t2405-worktree-submodule.sh
Corner case bugs in "git clean" that stems from a (necessarily for
performance reasons) awkward calling convention in the directory
enumeration API has been corrected.
* en/fill-directory-fixes-more:
dir: point treat_leading_path() warning to the right place
dir: restructure in a way to avoid passing around a struct dirent
dir: treat_leading_path() and read_directory_recursive(), round 2
clean: demonstrate a bug with pathspecs
Preparation of test scripts for the day when the object names will
use SHA-256 continues.
* bc/hash-independent-tests-part-7:
t5604: make hash independent
t5601: switch into repository to hash object
t5562: use $ZERO_OID
t5540: make hash size independent
t5537: make hash size independent
t5530: compute results based on object length
t5512: abstract away SHA-1-specific constants
t5510: make hash size independent
t5504: make hash algorithm independent
t5324: make hash size independent
t5319: make test work with SHA-256
t5319: change invalid offset for SHA-256 compatibility
t5318: update for SHA-256
t4300: abstract away SHA-1-specific constants
t4204: make hash size independent
t4202: abstract away SHA-1-specific constants
t4200: make hash size independent
t4134: compute appropriate length constant
t4066: compute index line in diffs
t4054: make hash-size independent
"git checkout X" did not correctly fail when X is not a local
branch but could name more than one remote-tracking branches
(i.e. to be dwimmed as the starting point to create a corresponding
local branch), which has been corrected.
* am/checkout-file-and-ref-ref-ambiguity:
checkout: don't revert file on ambiguous tracking branches
parse_branchname_arg(): extract part as new function
The final leg of rewriting "add -i/-p" in C.
* js/add-p-leftover-bits:
ci: include the built-in `git add -i` in the `linux-gcc` job
built-in add -p: handle Escape sequences more efficiently
built-in add -p: handle Escape sequences in interactive.singlekey mode
built-in add -p: respect the `interactive.singlekey` config setting
terminal: add a new function to read a single keystroke
terminal: accommodate Git for Windows' default terminal
terminal: make the code of disable_echo() reusable
built-in add -p: handle diff.algorithm
built-in add -p: support interactive.diffFilter
t3701: adjust difffilter test
Test clean-up.
* dl/test-must-fail-fixes:
t1507: inline full_name()
t1507: run commands within test_expect_success
t1507: stop losing return codes of git commands
t1501: remove use of `test_might_fail cp`
t1409: use test_path_is_missing()
t1409: let sed open its own input file
t1307: reorder `nongit test_must_fail`
t1306: convert `test_might_fail rm` to `rm -f`
t0020: use ! check_packed_refs_marked
t0020: don't use `test_must_fail has_cr`
t0003: don't use `test_must_fail attr_check`
t0003: use test_must_be_empty()
t0003: use named parameters in attr_check()
t0000: replace test_must_fail with run_sub_test_lib_test_err()
t/lib-git-p4: use test_path_is_missing()
When we're resolving a REF_DELTA, we compare-and-swap its type from
REF_DELTA to whatever real type the base object has, as discussed in
ab791dd138 (index-pack: fix race condition with duplicate bases,
2014-08-29). If the old type wasn't a REF_DELTA, we consider that a
BUG(). But as discussed in that commit, we might see this case whenever
we try to resolve an object twice, which may happen because we have
multiple copies of the base object.
So this isn't a bug at all, but rather a sign that the input pack is
broken. And indeed, this case is triggered already in t5309.5 and
t5309.6, which create packs with delta cycles and duplicate bases. But
we never noticed because those tests are marked expect_failure.
Those tests were added by b2ef3d9ebb (test index-pack on packs with
recoverable delta cycles, 2013-08-23), which was leaving the door open
for cases that we theoretically _could_ handle. And when we see an
already-resolved object like this, in theory we could keep going after
confirming that the previously resolved child->real_type matches
base->obj->real_type. But:
- enforcing the "only resolve once" rule here saves us from an
infinite loop in other parts of the code. If we keep going, then the
delta cycle in t5309.5 causes us to loop infinitely, as
find_ref_delta_children() doesn't realize which objects have already
been resolved. So there would be more changes needed to make this
case work, and in the meantime we'd be worse off.
- any pack that triggers this is broken anyway. It either has a
duplicate base object, or it has a cycle which causes us to bring in
a duplicate via --fix-thin. In either case, we'd end up rejecting
the pack in write_idx_file(), which also detects duplicates.
So the tests have little value in documenting what we _could_ be doing
(and have been neglected for 6+ years). Let's switch them to confirming
that we handle this case cleanly (and switch out the BUG() for a more
informative die() so that we do so).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the previous commit, the nature of the fanout heuristic
in the notes code causes the exact point at which we increase or
decrease the notes fanout to vary with the objects being annotated.
Since the object ids generated by the test environment are
deterministic (by design), the notes generated and tested by t3305
are always the same, and we therefore happen to see the same fanout
behavior from one run to the next.
Coincidentally, if we were to change the test environment slightly
(say by making a test commit on an unrelated branch before we start
the t3305 test proper), we not only see the fanout switch happen at
different points, we also manage to trigger a _bug_ in the notes
code where the fanout 1 -> 0 switch is not applied uniformly across
the notes tree, but instead yields a notes tree like this:
...
bdeafb301e44b0e4db0f738a2d2a7beefdb70b70
bff2d39b4f7122bd4c5caee3de353a774d1e632a
d3/8ec8f851adf470131178085bfbaab4b12ad2a7
e0b173960431a3e692ae929736df3c9b73a11d5b
eb3c3aede523d729990ac25c62a93eb47c21e2e3
...
The bug occurs when we are writing out a notes tree with a newly
decreased fanout, and the notes tree contains unexpanded subtrees
that should be consolidated into the parent tree as a consequence of
the decreased fanout):
Subtrees that happen to sit at an _even_ level in the internal notes
16-tree structure (in other words: subtrees whose path - "d3" in the
example above - is unique in the first nibble - i.e. there are no
other note paths that start with "d") are _not_ unpacked as part of
the tree writeout. This error will repeat itself in subsequent note
trees until the subtree is forced to be unpacked. In t3305 this only
happens when the d38ec8f8 note is itself removed from the tree.
The error is not severe (no information is lost, and the notes code
is able to read/decode this tree and manipulate it correctly), but
this is nonetheless a bug in the current implementation that should
be fixed.
That said, fixing the off-by-one error is not without complications:
We must take into account that the load_subtree() call from
for_each_note_helper() (that is now done to correctly unpack the
subtree while we're writing out the notes tree) may end up inserting
unpacked non-notes into the linked list of non_note entries held by
the struct notes_tree. Since we are in the process of writing out the
notes tree, this linked list is currently in the process of being
traversed by write_each_non_note_until(). The unpacked non-notes are
necessarily inserted between the last non-note we wrote out, and the
next non-note to be written. Hence, we cannot simply hold the
next_non_note to write in struct write_each_note_data (as we would
then silently skip these newly inserted notes), but must instead
always follow the ->next pointer from the last non-note we wrote.
(This part was caught by an existing test in t3304.)
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Brian M. Carlson <sandals@crustytoothpaste.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In short, before this patch, this test script:
- creates many notes
- verifies that all notes in the notes tree has a fanout of 1
- removes most notes
- verifies that the notes in the notes tree now has a fanout of 0
The fanout verification only happened twice: after creating all the
notes, and after removing most of them.
This patch strengthens the test by checking the fanout after _each_
added/removed note: We assert that the switch from fanout 0 -> 1
happens exactly once while adding notes (and that the switch pervades
the entire notes tree). Likewise, we assert that the switch from
fanout 1 -> 0 happens exactly once while removing notes.
Additionally, we decrease the number of notes left after removal,
from 50 to 15 notes, in order to ensure that fanout 1 -> 0 transition
keeps happening regardless of external factors[1].
[1]: Currently (with the SHA1 hash function and the deterministic
object ids of the test environment) the fanout heuristic in the notes
code happens to switch from 0 -> 1 at 109 notes, and from 1 -> 0 at
59 notes. However, changing the hash function or other external
factors will vary these numbers, and the latter may - in theory - go
as low as 15. For more details, please see the discussion at
https://public-inbox.org/git/20200125230035.136348-4-sandals@crustytoothpaste.net/
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Brian M. Carlson <sandals@crustytoothpaste.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a similar treatment as in the previous patch to pass a 'struct
object_directory *' through the 'load_commit_graph_one_fd_st'
initializer, too.
This prevents a potential bug where a pointer comparison is made to a
NULL 'g->odb', which would cause the commit-graph machinery to think
that a pair of commit-graphs belonged to different alternates when in
fact they do not (i.e., in the case of no '--object-dir').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have test coverage for "git submodule status" output in
various cases, i.e.
1) not-init, not-cloned: status should initially be "missing"
2) init, not-cloned: status should be "missing"
3) not-init, cloned: status should ignore the inner git-repo
4) init, cloned: status should be "up-to-date" after update
4.1) + modified: status should be "modified" after submodule commit
4.2) + modified, committed: status should be "up-to-date" after update
the case 3) is not covered yet.
Test that submodule status reports an inner git repo as unknown, while
it is not added to the superproject. This covers case (3).
Signed-off-by: Peter Kaestle <peter@piie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intention of the special "cone mode" in the sparse-checkout
feature is to always match the same patterns that are matched by the
same sparse-checkout file as when cone mode is disabled.
When a file path is given to "git sparse-checkout set" in cone mode,
then the cone mode improperly matches the file as a recursive path.
When setting the skip-worktree bits, files were not expecting the
MATCHED_RECURSIVE response, and hence these were left out of the
matched cone.
Fix this bug by checking for MATCHED_RECURSIVE in addition to MATCHED
and add a test that prevents regression.
Reported-by: Finn Bryant <finnbryant@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout patterns allow special globs according to
fnmatch(3). When writing cone-mode patterns for paths containing
these characters, they must be escaped.
Use is_glob_special() to check which characters must be escaped
this way, and add a path to the tests that contains all glob
characters at once. Note that ']' is not special, since the
initial bracket '[' is escaped.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When in cone mode, the 'git sparse-checkout list' subcommand lists
the directories included in the sparse cone. When these directories
contain odd characters, such as a backslash, then we need to use
C-style quotes similar to 'git ls-tree'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user somehow creates a directory with an asterisk (*) or backslash
(\), then the "git sparse-checkout set" command will struggle to provide
the correct pattern in the sparse-checkout file. When not in cone mode,
the provided pattern is written directly into the sparse-checkout file.
However, in cone mode we expect a list of paths to directories and then
we convert those into patterns.
Even more specifically, the goal is to always allow the following from
the root of a repo:
git ls-tree --name-only -d HEAD | git sparse-checkout set --stdin
The ls-tree command provides directory names with an unescaped asterisk.
It also quotes the directories that contain an escaped backslash. We
must remove these quotes, then keep the escaped backslashes.
Use unquote_c_style() when parsing lines from stdin. Command-line
arguments will be parsed as-is, assuming the user can do the correct
level of escaping from their environment to match the exact directory
names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user somehow creates a directory with an asterisk (*) or backslash
(\), then the "git sparse-checkout set" command will struggle to provide
the correct pattern in the sparse-checkout file. When not in cone mode,
the provided pattern is written directly into the sparse-checkout file.
However, in cone mode we expect a list of paths to directories and then
we convert those into patterns.
However, there is some care needed for the timing of these escapes. The
in-memory pattern list is used to update the working directory before
writing the patterns to disk. Thus, we need the command to have the
unescaped names in the hashsets for the cone comparisons, then escape
the patterns later.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the sparse-checkout feature uses hashset containment
queries to match paths. Make this algorithm respect escaped asterisk
(*) and backslash (\) characters.
Create dup_and_filter_pattern() method to convert a pattern by
removing escape characters and dropping an optional "/*" at the end.
This method is available in dir.h as we will use it in
builtin/sparse-checkout.c in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the sparse-checkout commmand will write patterns that
allow faster pattern matching. This matching only works if the patterns
in the sparse-checkout file are those written by that command. Users
can edit the sparse-checkout file and create patterns that cause the
cone mode matching to fail.
The cone mode patterns may end in "/*" but otherwise an un-escaped
asterisk or other glob character is invalid. Add checks to disable
cone mode when seeing these values.
A later change will properly handle escaped globs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In f237c8b6fe (commit-graph: implement git-commit-graph write,
2018-04-02) the test t5318.3 was introduced to ensure that calling 'git
commit-graph write' in a repository with no packfiles does not write any
commit-graph file(s).
To exercise more paths in 'builtin/commit-graph.c', this test passes
'--object-dir' to 'git commit-graph write', but the given argument
refers to the working copy, not the object directory.
Since the commit-graph sub-commands currently swallow these errors, this
does not result in a test failure. But, it is only lucky that the test
ends with no commit-graphs, since there were none to begin with.
In preparation for a future commit where an '--object-dir' argument that
does not match a known object directory will print out a failure, let's
fix the test to still use '--object-dir', but pass the correct location
to the object store instead of '.'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We parse diff.wsErrorHighlight in git_diff_ui_config(), meaning that it
doesn't take effect for plumbing commands, only for porcelains like
git-diff itself. This is mildly annoying as it means scripts like
add--interactive, which produce a user-visible diff with color, don't
respect the option.
We could teach that script to parse the config and pass it along as
--ws-error-highlight to the diff plumbing. But there's a simpler
solution.
It should be reasonably safe for plumbing to respect this option, as it
only kicks in when color is otherwise enabled. And anybody parsing
colorized output must already deal with the fact that color.diff.* may
change the exact output they see; those options have been part of
git_diff_basic_config() since its inception in 9a1805a872 (add a "basic"
diff config callback, 2008-01-04).
So we can just move it to the "basic" config, which fixes
add--interactive, along with any other script in the same boat, with a
very low risk of hurting any plumbing users.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor bugfixes to "git add -i" that has recently been rewritten in C.
* js/builtin-add-i-cmds:
built-in add -i: accept open-ended ranges again
built-in add -i: do not try to `patch`/`diff` an empty list of files
The command line completion (in contrib/) learned to complete
subcommands and arguments to "git worktree".
* sg/completion-worktree:
completion: list paths and refs for 'git worktree add'
completion: list existing working trees for 'git worktree' subcommands
completion: simplify completing 'git worktree' subcommands and options
completion: return the index of found word from __git_find_on_cmdline()
completion: clean up the __git_find_on_cmdline() helper function
t9902-completion: add tests for the __git_find_on_cmdline() helper
The test-lint machinery knew to check "VAR=VAL shell_function"
construct, but did not check "VAR= shell_funciton", which has been
corrected.
* jn/test-lint-one-shot-export-to-shell-function:
fetch test: mark test of "skipping" haves as v0-only
t/check-non-portable-shell: detect "FOO= shell_func", too
fetch test: avoid use of "VAR= cmd" with a shell function
gpg.minTrustLevel configuration variable has been introduced to
tell various signature verification codepaths the required minimum
trust level.
* hi/gpg-mintrustlevel:
gpg-interface: add minTrustLevel as a configuration option
