* bg/apply-fix-blank-at-eof:
t3417: Add test cases for "rebase --whitespace=fix"
t4124: Add additional tests of --whitespace=fix
apply: Allow blank context lines to match beyond EOF
apply: Remove the quick rejection test
apply: Don't unnecessarily update line lengths in the preimage
* cc/cherry-pick-ff:
rebase -i: use new --ff cherry-pick option
cherry-pick: add a no-op --no-ff option to future proof scripts
Documentation: describe new cherry-pick --ff option
cherry-pick: add tests for new --ff option
revert: add --ff option to allow fast forward when cherry-picking
builtin/merge: make checkout_fast_forward() non static
parse-options: add parse_options_concat() to concat options
* tc/http-cleanup:
remote-curl: init walker only when needed
remote-curl: use http_fetch_ref() instead of walker wrapper
http: init and cleanup separately from http-walker
http-walker: cleanup more thoroughly
http-push: remove "|| 1" to enable verbose check
t554[01]-http-push: refactor, add non-ff tests
t5541-http-push: check that ref is unchanged for non-ff test
* cc/reset-keep:
reset: disallow using --keep when there are unmerged entries
reset: disallow "reset --keep" outside a work tree
Documentation: reset: describe new "--keep" option
reset: add test cases for "--keep" option
reset: add option "--keep" to "git reset"
* jc/fetch-param:
fetch --all/--multiple: keep all the fetched branch information
builtin-fetch --all/--multi: propagate options correctly
t5521: fix and modernize
* nd/root-git:
Add test for using Git at root of file system
Support working directory located at root
Move offset_1st_component() to path.c
init-db, rev-parse --git-dir: do not append redundant slash
make_absolute_path(): Do not append redundant slash
Conflicts:
setup.c
sha1_file.c
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
I used to set GREP_OPTIONS to exclude *.orig and *.rej files. But with this
the test t4252-am-options.sh fails because it calls grep with a .rej file:
grep "@@ -1,3 +1,3 @@" file-2.rej
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* master:
stash: suggest the correct command line for unknown options.
t7406: Fix submodule init config tests
git-svn: make git svn --version work again
Revert "git-svn: always initialize with core.autocrlf=false"
git-svn: support fetch with autocrlf on
hash-object: support --stdin-paths with --no-filters
A --ff option to allow "git cherry-pick" to fast forward if
possible was added in a previous patch, and this behavior may
become the default one in the future.
So to future proof scripts that may rely on the current behavior
it is safer to add a --no-ff option to make sure that the current
behavior will be used.
Requested-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git rebase --whitespace=fix HEAD~<N>" is supposed to
only clean up trailing whitespace, and the expectation is that it
cannot fail.
Unfortunately, if one commit adds a blank line at the end of a file
and a subsequent commit adds more non-blank lines after the blank
line, "git apply" (used indirectly by "git rebase") will fail to apply
the patch of the second commit.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit, we will make it possible for blank context
lines to match beyond the end of the file. That means that a hunk
with a preimage that has more lines than present in the file may
be possible to successfully apply. Therefore, we must remove
the quick rejection test in find_pos().
find_pos() will already work correctly without the quick
rejection test, but that might not be obvious. Therefore,
comment the test for handling out-of-range line numbers in
find_pos() and cast the "line" variable to the same (unsigned)
type as img->nr.
What are performance implications of removing the quick
rejection test?
It can only help "git apply" to reject a patch faster. For example,
if I have a file with one million lines and a patch that removes
slightly more than 50 percent of the lines and try to apply that
patch twice, the second attempt will fail slightly faster
with the test than without (based on actual measurements).
However, there is the pathological case of a patch with many
more context lines than the default three, and applying that patch
using "git apply -C1". Without the rejection test, the running
time will be roughly proportional to the number of context lines
times the size of the file. That could be handled by writing
a more complicated rejection test (it would have to count the
number of blanks at the end of the preimage), but I don't find
that worth doing until there is a real-world use case that
would benfit from it.
It would be possible to keep the quick rejection test if
--whitespace=fix is not given, but I don't like that from
a testing point of view.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The use case for --keep option is to remove previous commits unrelated
to the current changes in the working tree. So in this use case we are
not supposed to have unmerged entries. This is why it seems safer to
just disallow using --keep when there are unmerged entries.
And this patch changes the error message when --keep was disallowed and
there were some unmerged entries from:
error: Entry 'file1' would be overwritten by merge. Cannot merge.
fatal: Could not reset index file to revision 'HEAD^'.
to:
fatal: Cannot do a keep reset in the middle of a merge.
which is nicer.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is safer and consistent with "--merge" and "--hard" resets to disallow
"git reset --keep" outside a work tree.
So let's just do that and add some tests while at it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests have been broken since they were introduced in commits
ca2cedb (git-submodule: add support for --rebase., 2009-04-24) and
42b4917 (git-submodule: add support for --merge., 2009-06-03).
'git submodule init' expects the submodules to exist in the index.
In this case, the submodules don't exist and therefore looking for
the submodules will always fail. To make matters worse, git submodule
fails visibly to the user by saying:
error: pathspec 'rebasing' did not match any file(s) known to git.
Did you forget to 'git add'?
but doesn't return an error code. This allows the test to fail silently.
Fix it by adding the submodules first.
Cc: Johan Herland <johan@herland.net>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Has the same functionality as the '--cc' option and 'format.cc'
configuration variable but for the "To:" email header. Half of the code to
support this was already there.
With email the To: header usually more important than the Cc: header.
[jc: tests are by Stephen Boyd]
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* master:
Update draft release notes to 1.7.0.2
Remove extra '-' from git-am(1)
t9119-git-svn-info.sh: test with svn 1.6.* as well
git-svn: req_svn when needed
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
When encountering a dirty submodule while doing "git diff --submodule"
print an extra line for new untracked content and another for modified
but already tracked content. And if the HEAD of the submodule is equal
to the ref diffed against in the superproject, drop the output which
would just show the same SHA1s and no commit message headlines.
To achieve that, the dirty_submodule bitfield is expanded to two bits.
The output of "git status" inside the submodule is parsed to set the
according bits.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All tests in t9119 were disabled for subversion versions other than
1.[45].*. Make the test script run with subversion 1.[456].*.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
* sp/maint-push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
Conflicts:
builtin-receive-pack.c
run-command.c
t/t5401-update-hooks.sh
* sh/am-keep-cr:
git-am: Add tests for `--keep-cr`, `--no-keep-cr` and `am.keepcr`
git-am: Add am.keepcr and --no-keep-cr to override it
git-am: Add command line parameter `--keep-cr` passing it to git-mailsplit
documentation: 'git-mailsplit --keep-cr' is not hidden anymore
* sd/init-template:
t/t0001-init.sh: add test for 'init with init.templatedir set'
init: having keywords without value is not a global error.
Add a "TEMPLATE DIRECTORY" section to git-init[1].
Add `init.templatedir` configuration variable.
* ld/push-porcelain:
git-push: add tests for git push --porcelain
git-push: make git push --porcelain print "Done"
git-push: send "To <remoteurl>" messages to the standard output in --porcelain mode
git-push: fix an advice message so it goes to stderr
Conflicts:
transport.c
* master:
fallback SSH_ASKPASS when GIT_ASKPASS not set
gitweb: Fix project-specific feature override behavior
gitweb multiple project roots documentation
bisect: error out when passing bad path parameters
Conflicts:
Makefile
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
This commit fixes a bug in processing project-specific override in
a situation when there is no project, e.g. for the projects list page.
When 'snapshot' feature had project specific config override enabled
by putting
$feature{'snapshot'}{'override'} = 1;
(or equivalent) in $GITWEB_CONFIG, and when viewing toplevel gitweb
page, which means the projects list page (to be more exact this
happens for any project-less action), gitweb would put the following
Perl warnings in error log:
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2065.
fatal: error processing config file(s)
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2221.
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2218.
The problem is in the following fragment of code:
# path to the current git repository
our $git_dir;
$git_dir = "$projectroot/$project" if $project;
# list of supported snapshot formats
our @snapshot_fmts = gitweb_get_feature('snapshot');
@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
For the toplevel gitweb page, which is the list of projects, $project is not
defined, therefore neither is $git_dir. gitweb_get_feature() subroutine
calls git_get_project_config() if project specific override is turned
on... but we don't have project here.
Those errors mentioned above occur in the following fragment of code in
git_get_project_config():
# get config
if (!defined $config_file ||
$config_file ne "$git_dir/config") {
%config = git_parse_project_config('gitweb');
$config_file = "$git_dir/config";
}
git_parse_project_config() calls git_cmd() which has '--git-dir='.$git_dir
There are (at least) three possible solutions:
1. Harden gitweb_get_feature() so that it doesn't call
git_get_project_config() if $project (and therefore $git_dir) is not
defined; there is no project for project specific config.
2. Harden git_get_project_config() like you did in your fix, returning early
if $git_dir is not defined.
3. Harden git_cmd() so that it doesn't add "--git-dir=$git_dir" if $git_dir
is not defined, and change git_get_project_config() so that it doesn't
even try to access $git_dir if it is not defined.
This commit implements both 1.) and 2.), i.e. gitweb_get_feature() doesn't
call project-specific override if $git_dir is not defined (if there is no
project), and git_get_project_config() returns early if $git_dir is not
defined.
Add a test for this bug to t/t9500-gitweb-standalone-no-errors.sh test.
Reported-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move non-fast forward tests to lib-httpd.sh so that we don't have to
duplicate the tests in both t5540 and t5541.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
