This was originally 'pull request #330 from ethomson/poll_inftim' in
msysgit/git.
poll: honor the timeout on Win32
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
HOME initialization was historically duplicated in many different places,
including /etc/profile, launch scripts such as git-bash.vbs and gitk.cmd,
and (although slightly broken) in the git-wrapper.
Even unrelated projects such as GitExtensions and TortoiseGit need to
implement the same logic to be able to call git directly.
Initialize HOME in git's own startup code so that we can eventually retire
all the duplicate initialization code.
Signed-off-by: Karsten Blees <blees@dcon.de>
Lets keep the environment initialization and conversion section as lean as
possible and move recently added tweaks to setup_windows_environment().
This fixes the following potential problems:
* Prevent duplicate TZ variables if both TZ and MSYS2_TZ are set.
* Some of the higher level x* APIs from wrapper.c require a working
getenv(), using e.g. xstrdup() during initialization is dangerous.
* Slashifying the Windows TMP variable may break native Windows programs,
use POSIX TMPDIR instead.
* Properly slashify TMPDIR even if it is already set, and also if we only
have TEMP, but not TMP.
* Reduce complexity from O(n) to O(log n).
Signed-off-by: Karsten Blees <blees@dcon.de>
This developer should really, really have known better. The fact that we
are changing the environment in ways for which the MSVCRT is not
prepared for is bad enough. But then this developer followed the request
to re-enable nedmalloc -- despite the prediction that it would cause an
access violation, predicting it in the same message as the request to
re-enable nedmalloc, no less!
To paper over the issue until the time when this developer finds the
time to re-design the Unicode environment handling from scratch, let's
hope that cURL is the only library we are using that *may* set an
environment variable using MSVCRT's putenv() after we fscked the
environment up.
Note: this commit can serve as no source of pride to anyone, certainly
not yours truly. It is necessary as a quick and pragmatic stop gap,
though, to prevent worse problems.
Note: cURL manages to set the variable CHARSET when nedmalloc is *not*
enabled, without causing an access violation. In that case, it sets it
successfully to the value "cp" + GetACP() (hence it is our choice, too,
cURL may need it, Git does not):
https://github.com/bagder/curl/blob/aa5808b5/lib/easy.c#L157-L162
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
HANDLE is defined internally as a void *, but in many cases it is
actually guaranteed to be a 32-bit integer. In these cases, GCC should
not warn about a cast of a pointer to an integer of a different type
because we know exactly what we are doing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When the result of a (a, 0) expression is not used, GCC now finds it
necessary to complain with a warning:
right-hand operand of comma expression has no effect
Let's just pretend to use the 0 value and have a peaceful and quiet life
again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The environment is modified in most surprising circumstances, and not
all of them are under Git's control. For example, calling
curl_global_init() on Windows will ensure that the CHARSET variable is
set, adding one if necessary.
While the previous commit worked around crashes triggered by such
outside changes of the environment by relaxing the requirement that the
environment be terminated by a NULL pointer, the other assumption made
by `mingw_getenv()` and `mingw_putenv()` is that the environment is
sorted, for efficient lookup via binary search.
Let's make real sure that our environment is intact before querying or
modifying it, and reinitialize our idea of the environment if necessary.
With this commit, before working on the environment we look briefly for
indicators that the environment was modified outside of our control, and
to ensure that it is terminated with a NULL pointer and sorted again in
that case.
Note: the indicators are maybe not sufficient. For example, when a
variable is removed, it will not be noticed. It might also be a problem
if outside changes to the environment result in a modified `environ`
pointer: it is unclear whether such a modification could result in a
problem when `mingw_putenv()` needs to `realloc()` the environment
buffer.
For the moment, however, the current fix works well enough, so let's
only face the potential problems when (and if!) they occur.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Outside of our Windows-specific code, the end of the environment can be
marked also by a pointer to a NUL character, not only by a NULL pointer
as our code assumed so far.
That led to a buffer overrun in `make_environment_block()` when running
`git-remote-https` in `mintty` (because `curl_global_init()` added the
`CHARSET` environment variable *outside* of `mingw_putenv()`, ending the
environment in a pointer to an empty string).
Side note for future debugging on Windows: when running programs in
`mintty`, the standard input/output/error is not connected to a Win32
Console, but instead is pipe()d. That means that even stderr may not be
written completely before a crash, but has to be fflush()ed explicitly.
For example, when debugging crashes, the developer should insert an
`fflush(stderr);` at the end of the `error()` function defined in
usage.c.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is unlikely that we have an empty environment, ever, but *if* we do,
when `environ_size - 1` is passed to `bsearchenv()` it is misinterpreted
as a real large integer.
To make the code truly defensive, refuse to do anything at all if the
size is negative (which should not happen, of course).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSys2 emulates pseudo terminals via named pipes, and isatty() returns 0
for such file descriptors. Therefore, some interactive functionality (such
as launching a pager, asking if a failed unlink should be repeated etc.)
doesn't work when run in a terminal emulator that uses MSys ptys (such as
mintty).
However, MSys uses special names for its pty pipes ('msys-*-pty*'), which
allows us to distinguish them from normal piped input / output.
On startup, check if stdin / stdout / stderr are connected to such pipes
using the NtQueryObject API from NTDll.dll. If the names match, adjust the
flags in MSVCRT's ioinfo structure accordingly.
Signed-off-by: Karsten Blees <blees@dcon.de>
Ensure that when passing a pipe, the gnulib poll replacement will not
return 0 before the timeout has passed.
Not obeying the timeout (and merely returning 0) causes pathological
behavior when preparing a packfile for a repository and taking a
long time to do so. If poll were to return 0 immediately, this would
cause keep-alives to get sent as quickly as possible until the packfile
was created. Such deviance from the standard would cause megabytes (or
more) of keep-alive packets to be sent.
GetTickCount is used as it is efficient, stable and monotonically
increasing. (Neither GetSystemTime nor QueryPerformanceCounter have
all three of these properties.)
When calculating hashes from pointers, it actually makes sense to cut
off the most significant bits. In that case, said warning does not make
a whole lot of sense.
So let's just work around it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow lstat
emulation (git calls lstat once for each file in the index). Windows
operating system APIs seem to be much better at scanning the status
of entire directories than checking single files.
Add an lstat implementation that uses a cache for lstat data. Cache misses
read the entire parent directory and add it to the cache. Subsequent lstat
calls for the same directory are served directly from the cache.
Also implement opendir / readdir / closedir so that they create and use
directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX dirent API on Windows via FindFirstFile/FindNextFile is
pretty staightforward, however, most of the information provided in the
WIN32_FIND_DATA structure is thrown away in the process. A more
sophisticated implementation may cache this data, e.g. for later reuse in
calls to lstat.
Make the dirent implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to readdir/closedir that match
the opendir implementation (i.e. similar to vtable pointers in OOP).
Define readdir/closedir so that they call the function pointers in the DIR
structure. This allows to choose the opendir implementation on a
call-by-call basis.
Move the fixed sized dirent.d_name buffer to the dirent-specific DIR
structure, as d_name may be implementation specific (e.g. a caching
implementation may just set d_name to point into the cache instead of
copying the entire file name string).
Signed-off-by: Karsten Blees <blees@dcon.de>
7ebac8cb94 made launching of .exe
externals work when installed in Unicode paths. But it broke launching
of non-.exe externals, no matter where they were installed. We now
correctly maintain the UTF-8 and UTF-16 paths in tandem in lookup_prog.
This fixes t5526, among others.
Signed-off-by: Adam Roben <adam@roben.org>
If Git were installed in a path containing non-ASCII characters,
commands such as git-am and git-submodule, which are implemented as
externals, would fail to launch with the following error:
> fatal: 'am' appears to be a git command, but we were not
> able to execute it. Maybe git-am is broken?
This was due to lookup_prog not being Unicode-aware. It was somehow
missed in 2ee5a1a14a.
Note that the only problem in this function was calling
GetFileAttributes instead of GetFileAttributesW. The calls to access()
were fine because access() is a macro which resolves to mingw_access,
which already handles Unicode correctly. But I changed lookup_prog to
use _waccess directly so that we only convert the path to UTF-16 once.
Signed-off-by: Adam Roben <adam@roben.org>
On Windows XP3 in git bash
git clone git@github.com:octocat/Spoon-Knife.git
cd Spoon-Knife
git gui
menu Remote\Fetch from\origin
error: cannot spawn git: No such file or directory
error: could not run rev-list
if u run
git fetch --all
it worked normal in git bash or gitgui tools
In second version CreateProcess get 'C:\Git\libexec\git-core/git.exe' in
first version - C:/Git/libexec/git-core/git.exe and not executes (unix
slashes)
after fixing C:\Git\libexec\git-core\git.exe or
C:/Git/libexec/git-core\git.exe it works normal
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows >= Vista, not having an application manifest with a
requestedExecutionLevel can cause several kinds of confusing behavior.
The first and more obvious behavior is "Installer Detection", where
Windows sometimes decides (by looking at things like the file name and
even sequences of bytes within the executable) that an executable is an
installer and should run elevated (causing the well-known popup dialog
to appear). In Git's context, subcommands such as "git patch-id" or "git
update-index" fall prey to this behavior.
The second and more confusing behavior is "File Virtualization". It
means that when files are written without having write permission, it
does not fail (as expected), but they are instead redirected to
somewhere else. When the files are read, the original contents are
returned, though, not the ones that were just written somewhere else.
Even more confusing, not all write accesses are redirected; Trying to
write to write-protected .exe files, for example, will fail instead of
redirecting.
In addition to being unwanted behavior, File Virtualization causes
dramatic slowdowns in Git (see for instance
http://code.google.com/p/msysgit/issues/detail?id=320).
There are two ways to prevent those two behaviors: Either you embed an
application manifest within all your executables, or you add an external
manifest (a file with the same name followed by .manifest) to all your
executables. Since Git's builtins are hardlinked (or copied), it is
simpler and more robust to embed a manifest.
A recent enough MSVC compiler should already embed a working internal
manifest, but for MinGW you have to do so by hand.
Very lightly tested on Wine, where like on Windows XP it should not make
any difference.
References:
- New UAC Technologies for Windows Vista
http://msdn.microsoft.com/en-us/library/bb756960.aspx
- Create and Embed an Application Manifest (UAC)
http://msdn.microsoft.com/en-us/library/bb756929.aspx
[js: simplified the embedding dramatically by reusing Git for Windows'
existing Windows resource file, removed the optional (and dubious)
processorArchitecture attribute of the manifest's assemblyIdentity
section.]
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When the rename function tries to move a directory it fails if the target
directory exists. It should check if it can delete the (possibly empty)
target directory and then try again to move the directory.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: 마누엘 <nalla@users.noreply.github.com>
With MSys2, the sigset_t type is defined in sys/types.h, therefore we
need to #include said file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When shell scripts access a $TMP variable containing backslashes, they
will be mistaken for escape characters. Let's not let that happen by
converting them to forward slashes.
This fixes t7800 with MSys2.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With MSys2, the "TZ" environment variable gets filtered out when calling
non-MSys2 executables. The reason is that Windows' time zone handling is
substantially different from the POSIX one.
However, we just taught Git for Windows' fork of the MSys2 runtime to
pass on the timezone in a different environment variable, MSYS2_TZ for
the sole purpose of Git being able to reinterpret it correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The unsetenv code has no idea to update our environ_size, therefore
causing segmentation faults when environment variables are removed
without compat/mingw.c's knowing (MinGW's optimized lookup would try
to strcmp() against NULL in such a case).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With MSys2's GCC, `ReadWriteBarrier` is already defined, and FORCEINLINE
unfortunately gets defined incorrectly.
Let's work around both problems, using the MSys2-specific
__MINGW64_VERSION_MAJOR constant to guard them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The excellent MSys2 project brings a substantially updated MinGW
environment including newer GCC versions and new headers. To support
compiling Git, let's special-case the new MinGW (tell-tale: the
_MINGW64_VERSION_MAJOR constant is defined).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSys2's strace facility is very useful for debugging... With this patch,
the bash will be executed through strace if the environment variable
GIT_STRACE_COMMANDS is set, which comes in real handy when investigating
issues in the test suite.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At least for cross-platform projects, it makes sense to hide the
files starting with a dot, as this is the behavior on Unix/MacOSX.
However, at least Eclipse has problems interpreting the hidden flag
correctly, so the default is to hide only the .git/ directory.
The config setting core.hideDotFiles therefore supports not only
'true' and 'false', but also 'dotGitOnly'.
[jes: clarified the commit message, made git init respect the setting
by marking the .git/ directory only after reading the config, and added
documentation, and rebased on top of current junio/next]
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Long overdue departure from the assumption that S_IFMT is shared by
everybody made in 2005.
* dm/compat-s-ifmt-for-zos:
compat: convert modes to use portable file type values
This adds simple wrapper functions around calls to stat(), fstat(),
and lstat() that translate the operating system's native file type
bits to those used by most operating systems. It also rewrites the
S_IF* macros to the common values, so all file type processing is
performed using the translated modes. This makes projects portable
across operating systems that use different file type definitions.
Only the file type bits may be affected by these compatibility
functions; the file permission bits are assumed to be 07777 and are
passed through unchanged.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the Linux open(2) man page, open() must return EISDIR
if a directory was attempted to be opened for writing. Our emulation
in mingw_open() does not get this right: it checks only for O_CREAT.
Fix it to check for a write request.
This fixes a failure in reflog handling, which opens files with
O_APPEND|O_WRONLY, but without O_CREAT, and expects EISDIR when the
named file happens to be a directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
z/OS port
* dm/port2zos:
compat/bswap.h: detect endianness from XL C compiler macros
Makefile: reorder linker flags in the git executable rule
git-compat-util.h: support variadic macros with the XL C compiler
There is no /usr/include/endian.h equivalent on z/OS, but the
compiler will define macros to indicate endianness on host and
target hardware. This adds a test for these macros as a last
resort for determining byte order.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows does not have POSIX-like signals, and so we ignore all
operations on the non-existent signal mask machinery.
Do not turn sigemptyset into a function, but leave it a macro that
erases the code in the argument because it is used to set sa_mask
of a struct sigaction, but our dummy in mingw.h does not have that
member.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
