The `check_write()` function verifies that we do not try to write to a
config source that cannot be written to, like for example stdin. But
while the new subcommands do call this function, they do so before
calling `handle_config_location()`. Consequently, we only end up
checking the default config location for writeability, not the location
that was actually specified by the caller of git-config(1).
Fix this by calling `check_write()` after `handle_config_location()`. We
will further clarify the relationship between those two functions in a
subsequent commit where we remove the global state that both implicitly
rely on.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only use actions in the legacy mode. Convert them to an enum and move
them into `cmd_config_actions()` to clearly demonstrate that they are
not used anywhere else.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the legacy options as well some of the variables it references into
`cmd_config_action()`. This reduces our reliance on global state.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the subcommand options as well as the `subcommand` variable into
`cmd_config()`. This reduces our reliance on global state.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `cmd_config()` we first try to parse the provided arguments as
subcommands and, if this is successful, call the respective functions
of that subcommand. Otherwise we continue with the "legacy" mode that
uses implicit actions and/or flags.
Disentangle this by moving the legacy mode into its own function. This
allows us to move the options into the respective functions and clearly
separates concerns.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking git-config(1) with a wrong set of arguments we end up
calling `usage_builtin_config()` after printing an error message that
says what was wrong. As that function ends up printing the full list of
options, which is quite long, the actual error message will be buried by
a wall of text. This makes it really hard to figure out what exactly
caused the error.
Furthermore, now that we have recently introduced subcommands, the usage
information may actually be misleading as we unconditionally print
options of the subcommand-less mode.
Fix both of these issues by just not printing the options at all
anymore. Instead, we call `usage()` that makes us report in a single
line what has gone wrong. This should be way more discoverable for our
users and addresses the inconsistency.
Furthermore, this change allow us to inline the options into the
respective functions that use them to parse the command line.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The singleton index_state instance "the_index" has been eliminated
by always instantiating "the_repository" and replacing references
to "the_index" with references to its .index member.
* ps/the-index-is-no-more:
repository: drop `initialize_the_repository()`
repository: drop `the_index` variable
builtin/clone: stop using `the_index`
repository: initialize index in `repo_init()`
builtin: stop using `the_index`
t/helper: stop using `the_index`
The credential helper protocol, together with the HTTP layer, have
been enhanced to support authentication schemes different from
username & password pair, like Bearer and NTLM.
* bc/credential-scheme-enhancement:
credential: add method for querying capabilities
credential-cache: implement authtype capability
t: add credential tests for authtype
credential: add support for multistage credential rounds
t5563: refactor for multi-stage authentication
docs: set a limit on credential line length
credential: enable state capability
credential: add an argument to keep state
http: add support for authtype and credential
docs: indicate new credential protocol fields
credential: add a field called "ephemeral"
credential: gate new fields on capability
credential: add a field for pre-encoded credentials
http: use new headers for each object request
remote-curl: reset headers on new request
credential: add an authtype field
Until now, `git config -h` would have printed help for the old-style
syntax. Now that all modes have proper subcommands though it is
preferable to instead display the subcommand help.
Drop the `NO_INTERNAL_HELP` flag to do so. While at it, drop the help
mismatch in t0450 and add the `--get-colorbool` option to the usage such
that git-config(1)'s synopsis and `git config -h` match.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "edit" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "remove-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "rename-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "unset" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "set" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "get" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git-config(1) has several modes, those modes are not exposed with
subcommands but instead by specifying action flags like `--unset` or
`--list`. This user interface is not really in line with how our more
modern commands work, where it is a lot more customary to say e.g. `git
remote list`. Furthermore, to add to the confusion, git-config(1) also
allows the user to request modes implicitly by just specifying the
correct number of arguments. Thus, `git config foo.bar` will retrieve
the value of "foo.bar" while `git config foo.bar baz` will set it to
"baz".
Overall, this makes for a confusing interface that could really use a
makeover. It hurts discoverability of what you can do with git-config(1)
and is comparatively easy to get wrong. Converting the command to have
subcommands instead would go a long way to help address these issues.
One concern in this context is backwards compatibility. Luckily, we can
introduce subcommands without breaking backwards compatibility at all.
This is because all the implicit modes of git-config(1) require that the
first argument is a properly formatted config key. And as config keys
_must_ have a dot in their name, any value without a dot would have been
discarded by git-config(1) previous to this change. Thus, given that
none of the subcommands do have a dot, they are unambiguous.
Introduce the first such new subcommand, which is "git config list". To
retain backwards compatibility we only conditionally use subcommands and
will fall back to the old syntax in case no subcommand was detected.
This should help to transition to the new-style syntax until we
eventually deprecate and remove the old-style syntax.
Note that the way we handle this we're duplicating some functionality
across old and new syntax. While this isn't pretty, it helps us to
ensure that there really is no change in behaviour for the old syntax.
Amend tests such that we run them both with old and new style syntax.
As tests are now run twice, state from the first run may be still be
around in the second run and thus cause tests to fail. Add cleanup logic
as required to fix such tests.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pull out function to handle the `--null` option, which we are about to
reuse in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's quite a bunch of options to git-config(1) that allow the user to
specify which config location to use when reading or writing config
options. The logic to handle this is thus by necessity also quite
involved.
Pull it out into a separate function so that we can reuse it in
subsequent commits which introduce proper subcommands.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-config(1) command has various different modes which are
accessible via e.g. `--get-urlmatch` or `--unset-all`. These modes are
declared with `OPT_BIT()`, which causes two minor issues:
- The respective modes also have a negated form `--no-get-urlmatch`,
which is unintended.
- We have to manually handle exclusiveness of the modes.
Switch these options to instead use `OPT_CMDMODE()`, which is made
exactly for this usecase. Remove the now-unneeded check that only a
single mode is given, which is now handled by the parse-options
interface.
While at it, format optional placeholders for arguments to conform to
our style guidelines by using `[<placeholder>]`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--fixed-value` option can be used to alter how the value-pattern
parameter is interpreted for the various actions of git-config(1). But
while it is an option, it is currently listed as part of the actions
group, which is wrong.
Move the option to the "Other" group, which hosts the various options
known to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move around the option array. This will help us with a follow-up commit
that introduces subcommands to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ownership of memory returned when preparing a comment string is
quite intricate: when the returned value is different than the passed
value, then the caller is responsible to free the memory. This is quite
subtle, and it's even easier to miss because the returned value is in
fact a `const char *`.
Adapt the function to always return either `NULL` or a newly allocated
string. The function is called at most once per git-config(1), so it's
not like this micro-optimization really matters. Thus, callers are now
always responsible for freeing the value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A scheduled "git maintenance" job is expected to work on all
repositories it knows about, but it stopped at the first one that
errored out. Now it keeps going.
* js/for-each-repo-keep-going:
maintenance: running maintenance should not stop on errors
for-each-repo: optionally keep going on an error
The "--rfc" option of "git format-patch" learned to take an
optional string value to be used in place of "RFC" to tweak the
"[PATCH]" on the subject header.
* jc/format-patch-rfc-more:
format-patch: "--rfc=-(WIP)" appends to produce [PATCH (WIP)]
format-patch: allow --rfc to optionally take a value, like --rfc=WIP
The "-k" and "--rfc" options of "format-patch" will now error out
when used together, as one tells us not to add anything to the
title of the commit, and the other one tells us to add "RFC" in
addition to "PATCH".
* ds/format-patch-rfc-and-k:
format-patch: ensure that --rfc and -k are mutually exclusive
The procedure to build multi-pack-index got confused by the
replace-refs mechanism, which has been corrected by disabling the
latter.
* xx/disable-replace-when-building-midx:
midx: disable replace objects
Leakfix.
* rj/add-i-leak-fix:
add: plug a leak on interactive_add
add-patch: plug a leak handling the '/' command
add-interactive: plug a leak in get_untracked_files
apply: plug a leak in apply_data
In https://github.com/microsoft/git/issues/623, it was reported that
maintenance stops on a missing repository, omitting the remaining
repositories that were scheduled for maintenance.
This is undesirable, as it should be a best effort type of operation.
It should still fail due to the missing repository, of course, but not
leave the non-missing repositories in unmaintained shapes.
Let's use `for-each-repo`'s shiny new `--keep-going` option that we just
introduced for that very purpose.
This change will be picked up when running `git maintenance start`,
which is run implicitly by `scalar reconfigure`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/microsoft/git/issues/623, it was reported that
the regularly scheduled maintenance stops if one repo in the middle of
the list was found to be missing.
This is undesirable, and points out a gap in the design of `git
for-each-repo`: We need a mode where that command does not stop on an
error, but continues to try running the specified command with the other
repositories.
Imitating the `--keep-going` option of GNU make, this commit teaches
`for-each-repo` the same trick: to continue with the operation on all
the remaining repositories in case there was a problem with one
repository, still setting the exit code to indicate an error occurred.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "receive-pack" program (which responds to "git push") was not
converted to run "git maintenance --auto" when other codepaths that
used to run "git gc --auto" were updated, which has been corrected.
* ps/run-auto-maintenance-in-receive-pack:
builtin/receive-pack: convert to use git-maintenance(1)
run-command: introduce function to prepare auto-maintenance process
The way "git fast-import" handles paths described in its input has
been tightened up and more clearly documented.
* ta/fast-import-parse-path-fix:
fast-import: make comments more precise
fast-import: forbid escaped NUL in paths
fast-import: document C-style escapes for paths
fast-import: improve documentation for path quoting
fast-import: remove dead strbuf
fast-import: allow unquoted empty path for root
fast-import: directly use strbufs for paths
fast-import: tighten path unquoting
In the previous step, the "--rfc" option of "format-patch" learned
to take an optional string value to prepend to the subject prefix,
so that --rfc=WIP can give "[WIP PATCH]".
There may be cases in which the extra string wants to come after the
subject prefix. Extend the mechanism to allow "--rfc=-(WIP)" [*] to
signal that the extra string is to be appended instead of getting
prepended, resulting in "[PATCH (WIP)]".
In the documentation, discourage (ab)using "--rfc=-RFC" to say
"[PATCH RFC]" just to be different, when "[RFC PATCH]" is the norm.
[Footnote]
* The syntax takes inspiration from Perl's open syntax that opens
pipes "open fh, '|-', 'cmd'", where the dash signals "the other
stuff comes here".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the "--rfc" option, we can tweak the "[PATCH]" (or whatever
string specified with the "--subject-prefix" option, instead of
"PATCH") that we prefix the title of the commit with into "[RFC
PATCH]", but some projects may want "[rfc PATCH]". Adding a new
option, e.g., "--rfc-lowercase", to support such need every time
somebody wants to use different strings would lead to insanity of
accumulating unbounded number of such options.
Allow an optional value specified for the option, so that users can
use "--rfc=rfc" (think of "--rfc" without value as a short-hand for
"--rfc=RFC") if they wanted to.
This can of course be (ab)used to make the prefix "[WIP PATCH]" by
passing "--rfc=WIP". Passing an empty string, i.e., "--rfc=", is
the same as "--no-rfc" to override an option given earlier on the
same command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a leak we have since 5a76aff1a6 (add: convert to use
parse_pathspec, 2013-07-14).
This leak can be triggered with:
$ git add -p anything
Fixing this leak allows us to mark as leak-free the following tests:
+ t3701-add-interactive.sh
+ t7514-commit-patch.sh
Mark them with "TEST_PASSES_SANITIZE_LEAK=true" to notice and fix
promply any new leak that may be introduced and triggered by them in the
future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash --staged" errors out when given binary files, after saving the
stash.
This behaviour dates back to the addition of the feature in 41a28eb6c1
(stash: implement '--staged' option for 'push' and 'save', 2021-10-18).
Adding the "--binary" option of "diff-tree" fixes this. The "diff-tree" call
in stash_patch() also omits "--binary", but that is fine since binary files
cannot be selected interactively.
Helped-By: Jeff King <peff@peff.net>
Helped-By: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug that allows the "--rfc" and "-k" options to be specified together
when "git format-patch" is executed, which was introduced in the commit
e0d7db7423 ("format-patch: --rfc honors what --subject-prefix sets").
Add a couple of additional tests to t4014, to cover additional cases of
the mutual exclusivity between different "git format-patch" options.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert git-clone(1) to use `the_repository->index` instead of
`the_index`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert builtins to use `the_repository->index` instead of `the_index`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We observed a series of clone failures arose in a specific set of
repositories after we fully enabled the MIDX bitmap feature within our
Codebase service. These failures were accompanied with error messages
such as:
Cloning into bare repository 'clone.git'...
remote: Enumerating objects: 8, done.
remote: Total 8 (delta 0), reused 0 (delta 0), pack-reused 8 (from 1)
Receiving objects: 100% (8/8), done.
fatal: did not receive expected object ...
fatal: fetch-pack: invalid index-pack output
Temporarily disabling the MIDX feature eliminated the reported issues.
After some investigation we found that all repositories experiencing
failures contain replace references, which seem to be improperly
acknowledged by the MIDX bitmap generation logic.
A more thorough explanation about the root cause from Taylor Blau says:
Indeed, the pack-bitmap-write machinery does not itself call
disable_replace_refs(). So when it generates a reachability bitmap, it
is doing so with the replace refs in mind. You can see that this is
indeed the cause of the problem by looking at the output of an
instrumented version of Git that indicates what bits are being set
during the bitmap generation phase.
With replace refs (incorrectly) enabled, we get:
[2, 4, 6, 8, 13, 3, 6, 7, 3, 4, 6, 8]
and doing the same after calling disable_replace_refs(), we instead get:
[2, 5, 6, 13, 3, 6, 7, 3, 4, 6, 8]
Single pack bitmaps are unaffected by this issue because we generate
them from within pack-objects, which does call disable_replace_refs().
This patch updates the MIDX logic to disable replace objects within the
multi-pack-index builtin, and a test showing a clone (which would fail
with MIDX bitmap) is added to demonstrate the bug.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 850b6edefa (auto-gc: extract a reusable helper from "git fetch",
2020-05-06), we have introduced a helper function `run_auto_gc()` that
kicks off `git gc --auto`. The intent of this function was to pass down
the "--quiet" flag to git-gc(1) as required without duplicating this at
all callsites. In 7c3e9e8cfb (auto-gc: pass --quiet down from am,
commit, merge and rebase, 2020-05-06) we then converted callsites that
need to pass down this flag to use the new helper function. This has the
notable omission of git-receive-pack(1), which is the only remaining
user of `git gc --auto` that sets up the proccess manually. This is
probably because it unconditionally passes down the `--quiet` flag and
thus didn't benefit much from the new helper function.
In a95ce12430 (maintenance: replace run_auto_gc(), 2020-09-17) we then
replaced `run_auto_gc()` with `run_auto_maintenance()` which invokes
git-maintenance(1) instead of git-gc(1). This command is the modern
replacement for git-gc(1) and is both more thorough and also more
flexible because administrators can configure which tasks exactly to run
during maintenance.
But due to git-receive-pack(1) not using `run_auto_gc()` in the first
place it did not get converted to use git-maintenance(1) like we do
everywhere else now. Address this oversight and start to use the newly
introduced function `prepare_auto_maintenance()`. This will also make it
easier for us to adapt this code together with all the other callsites
that invoke auto-maintenance in the future.
This removes the last internal user of `git gc --auto`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, there's no specific way to determine whether a credential
helper or git credential itself supports a given set of capabilities.
It would be helpful to have such a way, so let's let credential helpers
and git credential take an argument, "capability", which has it list the
capabilities and a version number on standard output.
Specifically choose a format that is slightly different from regular
credential output and assume that no capabilities are supported if a
non-zero exit status occurs or the data deviates from the format. It is
common for users to write small shell scripts as the argument to
credential.helper, which will almost never be designed to emit
capabilities. We want callers to gracefully handle this case by
assuming that they are not capable of extended support because that is
almost certainly the case, and specifying the error behavior up front
does this and preserves backwards compatibility in a graceful way.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have full support in Git for the authtype capability, let's
add support to the cache credential helper.
When parsing data, we always set the initial capabilities because we're
the helper, and we need both the initial and helper capabilities to be
set in order to have the helper capabilities take effect.
When emitting data, always emit the supported capability and make sure
we emit items only if we have them and they're supported by the caller.
Since we may no longer have a username or password, be sure to emit
those conditionally as well so we don't segfault on a NULL pointer.
Similarly, when comparing credentials, consider both the password and
credential fields when we're matching passwords.
Adjust the partial credential detection code so that we can store
credentials missing a username or password as long as they have an
authtype and credential.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over HTTP, NTLM and Kerberos require two rounds of authentication on the
client side. It's possible that there are custom authentication schemes
that also implement this same approach. Since these are tricky schemes
to implement and the HTTP library in use may not always handle them
gracefully on all systems, it would be helpful to allow the credential
helper to implement them instead for increased portability and
robustness.
To allow this to happen, add a boolean flag, continue, that indicates
that instead of failing when we get a 401, we should retry another round
of authentication. However, this necessitates some changes in our
current credential code so that we can make this work.
Keep the state[] headers between iterations, but only use them to send
to the helper and only consider the new ones we read from the credential
helper to be valid on subsequent iterations. That avoids us passing
stale data when we finally approve or reject the credential. Similarly,
clear the multistage and wwwauth[] values appropriately so that we
don't pass stale data or think we're trying a multiround response when
we're not. Remove the credential values so that we can actually fill a
second time with new responses.
Limit the number of iterations of reauthentication we do to 3. This
means that if there's a problem, we'll terminate with an error message
instead of retrying indefinitely and not informing the user (and
possibly conducting a DoS on the server).
In our tests, handle creating multiple response output files from our
helper so we can verify that each of the messages sent is correct.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We support the new credential and authtype fields, but we lack a way to
indicate to a credential helper that we'd like them to be used. Without
some sort of indication, the credential helper doesn't know if it should
try to provide us a username and password, or a pre-encoded credential.
For example, the helper might prefer a more restricted Bearer token if
pre-encoded credentials are possible, but might have to fall back to
more general username and password if not.
Let's provide a simple way to indicate whether Git (or, for that matter,
the helper) is capable of understanding the authtype and credential
fields. We send this capability when we generate a request, and the
other side may reply to indicate to us that it does, too.
For now, don't enable sending capabilities for the HTTP code. In a
future commit, we'll introduce appropriate handling for that code,
which requires more in-depth work.
The logic for determining whether a capability is supported may seem
complex, but it is not. At each stage, we emit the capability to the
following stage if all preceding stages have declared it. Thus, if the
caller to git credential fill didn't declare it, then we won't send it
to the helper, and if fill's caller did send but the helper doesn't
understand it, then we won't send it on in the response. If we're an
internal user, then we know about all capabilities and will request
them.
For "git credential approve" and "git credential reject", we set the
helper capability before calling the helper, since we assume that the
input we're getting from the external program comes from a previous call
to "git credential fill", and thus we'll invoke send a capability to the
helper if and only if we got one from the standard input, which is the
correct behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepaths that reach date_mode_from_type() have been updated to
pass "struct date_mode" by value to make them thread safe.
* rs/date-mode-pass-by-value:
date: make DATE_MODE thread-safe
"git add -u <pathspec>" and "git commit [-i] <pathspec>" did not
diagnose a pathspec element that did not match any files in certain
situations, unlike "git add <pathspec>" did.
* gt/add-u-commit-i-pathspec-check:
builtin/add: error out when passing untracked path with -u
builtin/commit: error out when passing untracked path with -i
revision: optionally record matches with pathspec elements
A config parser callback function fell through instead of returning
after recognising and processing a variable, wasting cycles, which
has been corrected.
* ds/fetch-config-parse-microfix:
fetch: return when parsing submodule.recurse
Windows binary used to decide the use of unix-domain socket at
build time, but it learned to make the decision at runtime instead.
* ma/win32-unix-domain-socket:
Win32: detect unix socket support at runtime
