Some of the flags used with the first diff found in PATH cause the
vendor diff to choke.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch, systems that provide stubs for pthread functions
in libc, but which still require libpthread for full the pthread
implementation are not detected correctly.
Also, some systems require -pthread in CFLAGS for each compilation
unit for a successful link of an mt binary, which is also addressed by
this patch.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, there are still plenty of production systems with
vendor compilers that choke unless all compound declarations can be
determined statically at compile time, for example hpux10.20 (I can
provide a comprehensive list of our supported platforms that exhibit
this problem if necessary).
This patch simply breaks apart any compound declarations with dynamic
initialisation expressions, and moves the initialisation until after
the last declaration in the same block, in all the places necessary to
have the offending compilers accept the code.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch there is no straight forward way to pass additional
CPPFLAGS at configure-time. At TWW, everything non-vendor package is
installed to its own subdirectory, so we need the following to show
the preprocessor where the headers for the libraries we will link
later can be found:
$SHELL ./configure \
CPPFLAGS="-I${SB_VAR_CURL_INC}\
-I${SB_VAR_LIBEXPAT_INC}\
-I${SB_VAR_LIBZ_INC}\
${CPPFLAGS+ $CPPFLAGS}" <<...>>
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting from ~ git-1.6.6, log, show & whatchanged show notes by default.
On the other hand, gitk does not show notes by default, because under
the hood it calls 'git log --pretty=raw ...' to get the log, and in
'git log' notes are turned off when user specifies format or pretty
settings.
Yes, it is possible to invoke 'gitk --show-notes' explicitly, but since
from user's perspective, gitk is gui enabled git log, it would be
logical for gitk to show notes by default too for consistency.
In git, --show-notes was introduced in 66b2ed (Fix "log" family not to
be too agressive about showing notes) which predates 1.6.6.2.
Notes can still be supressed with 'gitk --no-notes'.
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
ac8d5af (builtin-status: submodule summary support, 2008-04-12)
intoduced this variable and described it in git-status[1].
Include this description in git-config[1], as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* master:
Makefile: reenable install with NO_CURL
completion: --set-upstream option for git-branch
get_cwd_relative(): do not misinterpret suffix as subdirectory
* maint:
Makefile: reenable install with NO_CURL
completion: --set-upstream option for git-branch
get_cwd_relative(): do not misinterpret suffix as subdirectory
Setting NO_CURL leaves some variables like REMOTE_CURL_ALIASES
empty, which creates no fun when for-looping over
$(REMOTE_CURL_ALIASES) unconditionally. Make it conditional.
Reported-by: Paul Walker <PWalker752@aol.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After c197702 (pretty: Respect --abbrev option), non-abbreviated hashes
began to appear, leading to failures for these tests.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
daae1922 (fsck: check ident lines in commit objects, 2010-04-24)
taught fsck to expect commit objects to have the form
tree <object name>
<parents>
author <valid ident string>
committer <valid ident string>
log message
The check is overly strict: for example, it errors out with the
message “expected blank line” for perfectly valid commits with an
"encoding ISO-8859-1" line.
Later it might make sense to teach fsck about the rest of the header
and warn about unrecognized header lines, but for simplicity, let’s
accept arbitrary trailing lines for now.
Reported-by: Tuncer Ayaz <tuncer.ayaz@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is the same as the work tree path
plus a suffix, e.g. 'work' and 'work-xyz', then the suffix '-xyz'
would be interpreted as a subdirectory of 'work'.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with PHP5, class methods can have a visibility modifier, which
caused the methods not to be matched by the existing regexp, so extend
the regexp to match those modifiers. And while we're at it, allow the
"static" modifier as well.
Since the "static" modifier can appear either before or after the
visibility modifier, let's just allow any number of modifiers to appear
in any order, as that simplifies the regexp and shouldn't cause any
false positives.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, EACCES overrules ENOTEMPTY when calling rmdir(). But if the
directory is busy, we only want to retry deleting the directory if it
is empty, so test specifically for that case and set ENOTEMPTY rather
than EACCES.
Noticed by Greg Hazel.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
* master:
Documentation/SubmittingPatches: clarify GMail section and SMTP
show-branch: use DEFAULT_ABBREV instead of 7
t7502-commit: fix spelling
test get_git_work_tree() return value for NULL
* maint:
Documentation/SubmittingPatches: clarify GMail section and SMTP
show-branch: use DEFAULT_ABBREV instead of 7
t7502-commit: fix spelling
test get_git_work_tree() return value for NULL
We keep getting mangled submissions from GMail's web interface. Try to
be more proactive in SubmittingPatches by
- pointing to MUA specific instructions early on,
- structuring the GMail section more clearly,
- putting send-email/SMTP before imap-send/IMAP.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pull was never meant to take --dry-run at all. However, it
passes unknown arguments to git-fetch, which does do a
dry-run. Unfortunately, pull then attempts to merge whatever
cruft was in FETCH_HEAD (which the dry-run fetch will not
have written to).
Even though we never advertise --dry-run as something that
should work, it is still worth being defensive because:
1. Other commands (including fetch) take --dry-run, so a
user might try it.
2. Rather than simply producing an error, it actually
changes the repository in totally unexpected ways.
This patch makes "pull --dry-run" equivalent to "fetch
--dry-run".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are in a git directory, get_git_work_tree() can return NULL.
While trying to determine whether or not the given paths are outside
the work tree, the following command would read from it anyways and
trigger a segmentation fault.
git diff / /
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes a sha1 and produces a loose object
filename. It caches the location of the object directory so
that it can fill the sha1 information directly without
allocating a new buffer (and in its original incarnation,
without calling getenv(), though these days we cache that
with the code in environment.c).
This cached base directory can become stale, however, if in
a single process git changes the location of the object
directory (e.g., by running setup_work_tree, which will
chdir to the new worktree).
In most cases this isn't a problem, because we tend to set
up the git repository location and do any chdir()s before
actually looking up any objects, so the first lookup will
cache the correct location. In the case of reset --hard,
however, we do something like:
1. look up the commit object
2. notice we are doing --hard, run setup_work_tree
3. look up the tree object to reset
Step (3) fails because our cache object directory value is
bogus.
This patch simply removes the caching. We use a static
buffer instead of allocating one each time (the original
version treated the malloc'd buffer as a static, so there is
no change in calling semantics).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a $toplevel variable accessible to `git submodule foreach`, it
contains the absolute path of the top level directory (where
.gitmodules is).
This makes it possible to e.g. read data in .gitmodules from within
foreach commands. I'm using this to configure the branch names I want
to track for each submodule:
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
For a little history: This patch is borne out of my continuing fight
of trying to have Git track the branches of submodules, not just their
commits.
Obviously that's not how they work (they only track commits), but I'm
just interested in being able to do:
git submodule foreach 'git pull'
Of course that won't work because the submodule is in a disconnected
head, so I first have to connect it, but connect it *to what*.
For a while I was happy with this because as fate had it, it just so
happened to do what I meant:
git submodule foreach 'git checkout $(git describe --all --always) && git pull'
But then that broke down, if there's a tag and a branch the tag will
win out, and I can't git pull a branch:
$ git branch -a
* master
remotes/origin/HEAD -> origin/master
remotes/origin/master
$ git tag -l
release-0.0.6
$ git describe --always --all
release-0.0.6
So I figured that I might as well start tracking the branches I want
in .gitmodules itself:
[submodule "yaml-mode"]
path = yaml-mode
url = git://github.com/yoshiki/yaml-mode.git
branch = master
So now I can just do (as stated above):
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
Maybe there's a less painful way to do *that* (I'd love to hear about
it). But regardless of that I think it's a good idea to be able to
know what the top-level is from git submodule foreach.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally treat these as equivalent to "/path/to/repo"
and "host:path_to_repo" respectively. However, they are URLs
and as such may be percent-encoded. The current code simply
uses them as-is without any decoding.
With this patch, we will now percent-decode any file:// or
ssh:// url (or ssh+git, git+ssh, etc) at the transport
layer. We continue to treat plain paths and "host:path"
syntax literally.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_url function and url percent-decoding functions were
static, but are generally useful. Let's make them available
to other parts of the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Search patterns in a file specified with -f can contain NUL characters.
The current code ignores all characters on a line after a NUL.
Pass the actual length of the line all the way from the pattern file to
fixmatch() and use it for case-sensitive fixed string matching.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor REG_STARTEND handling inlook_ahead() into a new helper,
regmatch(), and use it for line matching, too. This allows regex
matching beyond NUL characters if regexec() supports the flag. NUL
characters themselves are not matched in any way, though.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions for C strings, like strcasestr(), can't see beyond NUL
characters. Check if there is such an obstacle on the line and try
again behind it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow searching beyond NUL characters by using memmem() instead of
strstr().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the option -c/--count, git grep with the option -l/--name-only
should work the same with binary files as with text files because
there is no danger of messing up the terminal with control characters
from the contents of matching files. GNU grep does the same.
Move the check for ->name_only before the one for binary_match_only,
thus making the latter irrelevant for git grep -l.
Reported-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent of showing the message "Binary file xyz matches" for
binary files is to avoid annoying users by potentially messing up
their terminals by printing control characters. In --count mode,
this precaution isn't necessary.
Display counts of matches if -c/--count was specified, even if -a
was not given. GNU grep does the same.
Moving the check for ->count before the code for handling binary
file also avoids printing context lines if --count and -[ABC] were
used together, so we can remove the part of the comment that
mentions this behaviour. Again, GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turn the switch inside-out and add labels for each possible value
of ->binary. This makes the code easier to read and avoids calling
buffer_is_binary() if the option -a was given.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-send-email.perl, here are two checks to determine if
$smtp_server is an absolute path (so it'll be treated as a mailer) or
not (so it'll be treated as a hostname). The one that handles actual
mail processing has been taught to recognize Windows pathnames by
commit 33b2e81f.
The other check is just to tell the user what happened, so it's far
less important, but the current state is that we will still claim to
the user that c:/foo/bar is a server. =) This makes the second check
consistent with the first.
Signed-off-by: bert Dvornik <dvornik+git@gmail.com>
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
Conflicts:
builtin.h
* js/try-to-free-stackable:
Do not call release_pack_memory in malloc wrappers when GIT_TRACE is used
Have set_try_to_free_routine return the previous routine
