"git check-ignore" did not work when the given path is explicitly
marked as not ignored with a negative entry in the .gitignore file.
* en/check-ignore:
check-ignore: fix documentation and implementation to match
The object reachability bitmap machinery and the partial cloning
machinery were not prepared to work well together, because some
object-filtering criteria that partial clones use inherently rely
on object traversal, but the bitmap machinery is an optimization
to bypass that object traversal. There however are some cases
where they can work together, and they were taught about them.
* jk/object-filter-with-bitmap:
rev-list --count: comment on the use of count_right++
pack-objects: support filters with bitmaps
pack-bitmap: implement BLOB_LIMIT filtering
pack-bitmap: implement BLOB_NONE filtering
bitmap: add bitmap_unset() function
rev-list: use bitmap filters for traversal
pack-bitmap: basic noop bitmap filter infrastructure
rev-list: allow commit-only bitmap traversals
t5310: factor out bitmap traversal comparison
rev-list: allow bitmaps when counting objects
rev-list: make --count work with --objects
rev-list: factor out bitmap-optimized routines
pack-bitmap: refuse to do a bitmap traversal with pathspecs
rev-list: fallback to non-bitmap traversal when filtering
pack-bitmap: fix leak of haves/wants object lists
pack-bitmap: factor out type iterator initialization
This reverts commit 72b006f4bf, which
breaks the end-user experience when merging a signed tag without
having the public key. We should report "can't check because we
have no public key", but the code with this change claimed that
there was no signature.
When searching the commit graph for tag candidates, `git-describe`
will stop as soon as there is only one active branch left and
it already found an annotated tag as a candidate.
This works well as long as all branches eventually connect back
to a common root, but if the tags are found across branches
with no common ancestor
B
o----.
\
o-----o---o----x
A
it can happen that the search on one branch terminates prematurely
because a tag was found on another, independent branch. This scenario
isn't quite as obscure as it sounds, since cloning with a limited
depth often introduces many independent "dead ends" into the commit
graph.
The help text of `git-describe` states pretty clearly that when
describing a commit D, the number appended to the emitted tag X should
correspond to the number of commits found by `git log X..D`.
Thus, this commit modifies the stopping condition to only abort
the search when only one branch is left to search *and* all current
best candidates are descendants from that branch.
For repositories with a single root, this condition is always
true: When the search is reduced to a single active branch, the
current commit must be an ancestor of *all* tag candidates. This
means that in the common case, this change will have no negative
performance impact since the same number of commits as before will
be traversed.
Signed-off-by: Benno Evers <benno@bmevers.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `options.switch_to' is set, `options.orig_head' is populated right
after with the object name the ref/commit argument points at.
Therefore, there is no need to parse `switch_to' again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
Previously, performing "git clone --recurse-submodules --single-branch"
resulted in submodules cloning all branches even though the superproject
cloned only one branch. Pipe --single-branch through the submodule
helper framework to make it to 'clone' later on.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start using a named initializer list for SUBMODULE_UPDATE_CLONE_INIT, as
the struct is becoming cumbersome for a typical struct initializer list.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add <path>" performs various checks before approving
<path> as a valid location for the new worktree. Aside from ensuring
that <path> does not already exist, one of the questions it asks is
whether <path> is already a registered worktree. To perform this check,
it queries find_worktree() and disallows the "add" operation if
find_worktree() finds a match for <path>. As a convenience, however,
find_worktree() casts an overly wide net to allow users to identify
worktrees by shorthand in order to keep typing to a minimum. For
instance, it performs suffix matching which, given subtrees "foo/bar"
and "foo/baz", can correctly select the latter when asked only for
"baz".
"add" validation knows the exact path it is interrogating, so this sort
of heuristic-based matching is, at best, questionable for this use-case
and, at worst, may may accidentally interpret <path> as matching an
existing worktree and incorrectly report it as already registered even
when it isn't. (In fact, validate_worktree_add() already contains a
special case to avoid accidentally matching against the main worktree,
precisely due to this problem.)
Avoid the problem of potential accidental matching against an existing
worktree by instead taking advantage of find_worktree_by_path() which
matches paths deterministically, without applying any sort of magic
shorthand matching performed by find_worktree().
Reported-by: Cameron Gunnin <cameron.gunnin@synopsys.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a caller sets the object_info.delta_base_sha1 to a non-NULL pointer,
we'll write the oid of the object's delta base to it. But we can
increase our type safety by switching this to a real object_id struct.
All of our callers are just pointing into the hash member of an
object_id anyway, so there's no inconvenience.
Note that we do still keep it as a pointer-to-struct, because the NULL
sentinel value tells us whether the caller is even interested in the
information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the pack-reuse code is dumping an OFS_DELTA entry to a client that
doesn't support it, we re-write it as a REF_DELTA. To do so, we use
nth_packed_object_sha1() to get the oid, but that function is soon going
away in favor of the more type-safe nth_packed_object_id(). Let's switch
now in preparation.
Note that this does incur an extra hash copy (from the pack idx mmap to
the object_id and then to the output, rather than straight from mmap to
the output). But this is not worth worrying about. It's probably not
measurable even when it triggers, and this is fallback code that we
expect to trigger very rarely (since everybody supports OFS_DELTA these
days anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already store an object_id internally, and now our sole caller also
has one. Let's stop passing around the internal hash array, which adds a
bit of type safety.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're considering reusing an on-disk delta, we get the oid of the
base as a pointer to unsigned char bytes of the hash, either into the
packfile itself (for REF_DELTA) or into the pack idx (using the revindex
to convert the offset into an index entry).
Instead, we'd prefer to use a more type-safe object_id as much as
possible. We can get the pack idx using nth_packed_object_id() instead.
For the packfile bytes, we can copy them out using oidread().
This doesn't even incur an extra copy overall, since the next thing we'd
always do with that pointer is pass it to can_reuse_delta(), which needs
an object_id anyway (and called oidread() itself). So this patch also
converts that function to take the object_id directly.
Note that we did previously use NULL as a sentinel value when the object
isn't a delta. We could probably get away with using the null oid for
this, but instead we'll use an explicit boolean flag, which should make
things more obvious for people reading the code later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our nth_packed_object_sha1() function returns NULL for error. So when we
wrapped it with nth_packed_object_oid(), we kept the same semantics. But
it's a bit funny, because the caller actually passes in an out
parameter, and the pointer we return is just that same struct they
passed to us (or NULL).
It's not too terrible, but it does make the interface a little
non-idiomatic. Let's switch to our usual "0 for success, negative for
error" return value. Most callers either don't check it, or are
trivially converted. The one that requires the biggest change is
actually improved, as we can ditch an extra aliased pointer variable.
Since we are changing the interface in a subtle way that the compiler
wouldn't catch, let's also change the name to catch any topics in
flight. We can drop the 'o' and make it nth_packed_object_id(). That's
slightly shorter, but also less redundant since the 'o' stands for
"object" already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The invocation "git rebase <upstream> <branch>" switches to <branch>
before performing the rebase operation. However, unlike git-switch,
git-checkout, and git-worktree which all refuse to switch to a branch
that is already checked out in some other worktree, git-rebase switches
to <branch> unconditionally. Curb this careless behavior by making
git-rebase also refuse to switch to a branch checked out elsewhere.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The receive.denyCurrentBranch config option controls what happens if
you push to a branch that is checked out into a non-bare repository.
By default, it rejects it. It can be disabled via `ignore` or `warn`.
Another yet trickier option is `updateInstead`.
However, this setting was forgotten when the git worktree command was
introduced: only the main worktree's current branch is respected.
With this change, all worktrees are respected.
That change also leads to revealing another bug,
i.e. `receive.denyCurrentBranch = true` was ignored when pushing into a
non-bare repository's unborn current branch using ref namespaces. As
`is_ref_checked_out()` returns 0 which means `receive-pack` does not get
into conditional statement to switch `deny_current_branch` accordingly
(ignore, warn, refuse, unconfigured, updateInstead).
receive.denyCurrentBranch uses the function `refs_resolve_ref_unsafe()`
(called via `resolve_refdup()`) to resolve the symbolic ref HEAD, but
that function fails when HEAD does not point at a valid commit.
As we replace the call to `refs_resolve_ref_unsafe()` with
`find_shared_symref()`, which has no problem finding the worktree for a
given branch even if it is unborn yet, this bug is fixed at the same
time: receive.denyCurrentBranch now also handles worktrees with unborn
branches as intended even while using ref namespaces.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transition plan anticipates that we will allow signatures using
multiple algorithms in a single commit. In order to do so, we need to
use a different header per algorithm so that it will be obvious over
which data to compute the signature.
The transition plan specifies that we should use "gpgsig-sha256", so
wire up the commit code such that it can write and parse the current
algorithm, and it can remove the headers for any algorithm when creating
a new commit. Add tests to ensure that we write using the right header
and that git fsck doesn't reject these commits.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we perform a clone, we won't know the remote side's hash algorithm
until we've read the heads. Consequently, we'll need to rewrite the
repository format version and hash algorithm once we know what the
remote side has. Move the code that does this into its own function so
that we can call it from clone in the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the foreseeable future, SHA-1 will be the default algorithm for Git.
However, when running the testsuite, we want to be able to test an
arbitrary algorithm. It would be quite burdensome and very untidy to
have to specify the algorithm we'd like to test every time we
initialized a new repository somewhere in the testsuite, so add an
environment variable to allow us to specify the default hash algorithm
for Git.
This has the benefit that we can set it once for the entire testsuite
and not have to think about it. In the future, users can also use it to
set the default for their repositories if they would like to do so.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the user to specify the hash algorithm on the command line by
using the --object-format option to git init. Validate that the user is
not attempting to reinitialize a repository with a different hash
algorithm. Ensure that if we are writing a non-SHA-1 repository that we
set the repository version to 1 and write the objectFormat extension.
Restrict this option to work only when ENABLE_SHA256 is set until the
codebase is in a situation to fully support this.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we will want to not only check the repository format, but
extract the information that we've gained. To do so, allow
check_repository_format to take a pointer to struct repository_format.
Allow passing NULL for this argument if we're not interested in the
information, and pass NULL for all existing callers. A future patch
will make use of this information.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid hard-coding a hash size, instead preferring to use the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can check if certain characters are present in a string by calling
strchr(3) on each of them, or we can pass them all to a single
strpbrk(3) call. The latter is shorter, less repetitive and slightly
more efficient, so let's do that instead.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using partial clone, find_non_local_tags() in builtin/fetch.c
checks each remote tag to see if its object also exists locally. There
is no expectation that the object exist locally, but this function
nevertheless triggers a lazy fetch if the object does not exist. This
can be extremely expensive when asking for a commit, as we are
completely removed from the context of the non-existent object and
thus supply no "haves" in the request.
6462d5eb9a (fetch: remove fetch_if_missing=0, 2019-11-05) removed a
global variable that prevented these fetches in favor of a bitflag.
However, some object existence checks were not updated to use this flag.
Update find_non_local_tags() to use OBJECT_INFO_SKIP_FETCH_OBJECT in
addition to OBJECT_INFO_QUICK. The _QUICK option only prevents
repreparing the pack-file structures. We need to be extremely careful
about supplying _SKIP_FETCH_OBJECT when we expect an object to not exist
due to updated refs.
This resolves a broken test in t5616-partial-clone.sh.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An annotated tag has two names: where it sits in the refs/tags
hierarchy and the tagname recorded in the "tag" field in the object
itself. They usually should match.
Since 212945d4 ("Teach git-describe to verify annotated tag names
before output", 2008-02-28), a commit described using an annotated
tag bases its name on the tagname from the object. While this was a
deliberate design decision to make it easier to converse about tags
with others, even if the tags happen to be fetched to a different
name than it was given by its creator, it had one downside.
The output from "git describe", at least in the modern Git, should
be usable as an object name to name the exact commit given to the
"git describe" command. Using the tagname, when two names differ,
breaks this property, when describing a commit that is directly
pointed at by such a tag. An annotated tag Bob made as "v1.0" may
sit at "refs/tags/v1.0-bob" in the ref hierarchy, and output from
"git describe v1.0-bob^0" would say "v1.0", but there may not be
any tag at "refs/tags/v1.0" locally or there may be another tag that
points at a different object.
Note that this won't be a problem if a commit being described is not
directly pointed at by such a mislocated tag. In the example in the
previous paragraph, describing a commit whose parent is v1.0-bob
would result in "v1.0" (i.e. the tagname taken from the tag object)
followed by "-1-gXXXXX" where XXXXX is the abbreviated object name,
and a string that ends with "-g" followed by a hexadecimal string is
an object name for the object whose name begins with hexadecimal
string (as long as it is unique), so it does not matter if the
leading part is "v1.0" or "v1.0-bob".
Show the name in the long format, i.e. with "-0-gXXXXX" suffix, when
the name we give is based on a mislocated annotated tag to ensure
that the output can be used as the object name for the object
originally given to the command to fix the issue.
While at it, remove an overly cautious dead code to protect against
an annotated tag object without the tagname. Such a tag is filtered
out much earlier in the codeflow, and will not reach this part of
the code.
Helped-by: Matheus Tavares <matheus.bernardino@usp.br>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output of "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable
or base64. Add a new mode to "git am --show-current-patch" in order to
straighten the suggestion.
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable or
base64. To simplify worktree operations and to avoid that users poke into
.git, it would be better if "git am" also provided a mode that copies
.git/rebase-merge/patch to stdout.
One possibility could be to have completely separate options, introducing
for example --show-current-message (for .git/rebase-apply/NNNN)
and --show-current-diff (for .git/rebase-apply/patch), while possibly
deprecating --show-current-patch.
That would even remove the need for the first two patches in the series.
However, the long common prefix would have prevented using an abbreviated
option such as "--show". Therefore, I chose instead to add a string
argument to --show-current-patch. The new argument is optional, so that
"git am --show-current-patch"'s behavior remains backwards-compatible.
The next choice to make is how to handle multiple --show-current-patch
options. Right now, something like "git am --abort --show-current-patch"
is rejected, and the previous suggestion would likewise have naturally
rejected a command line like
git am --show-current-message --show-current-diff
Therefore, I decided to also reject for example
git am --show-current-patch=diff --show-current-patch=raw
In other words the whole of --show-current-patch=xxx (including the
optional argument) is treated as the command mode. I found this to be
more consistent and intuitive, even though it differs from the usual
"last one wins" semantics of the git command line.
Add the code to parse submodes based on the above design, where for now
"raw" is the only valid submode. "raw" prints the full e-mail message
just like "git am --show-current-patch".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow stashing the submode of --show-current-patch from a
callback function. Using a struct will allow accessing both fields from
outside cmd_am (through container_of).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `-`. Such use case is not
really expected.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate crude option parsing and rely on real parsing instead, because
1) Crude parsing is crude, for example it's not capable of
handling things like `git stash -m Message`
2) Adding options in two places is inconvenient and prone to bugs
As a side result, the case of `git stash -m Message` gets fixed.
Also give a good error message instead of just throwing usage at user.
----
Some review of what's been happening to this code:
Before [1], `git-stash.sh` only verified that all args begin with `-` :
# The default command is "push" if nothing but options are given
seen_non_option=
for opt
do
case "$opt" in
--) break ;;
-*) ;;
*) seen_non_option=t; break ;;
esac
done
Later, [1] introduced the duplicate code I'm now removing, also making
the previous test more strict by white-listing options.
----
[1] Commit 40af1468 ("stash: convert `stash--helper.c` into `stash.c`" 2019-02-26)
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) It is not allowed to pass pathspec in both args and file.
Adjustments were needed for `if (!argc)` block:
This code actually means "pathspec is not present". Previously, pathspec
could only come from commandline arguments, so testing for `argc` was a
valid way of testing for the presence of pathspec. But this is no longer
true with `--pathspec-from-file`.
During the entire `--pathspec-from-file` story, I tried to keep its
behavior very close to giving pathspec on commandline, so that switching
from one to another doesn't involve any surprises.
However, throwing usage at user in the case of empty
`--pathspec-from-file` would puzzle because there's nothing wrong with
"usage" (that is, argc/argv array).
On the other hand, throwing usage in the old case also feels bad to me.
While it's less of a puzzle, I (as user) never liked the experience of
comparing my commandline to "usage", trying to spot a difference. Since
it's already known what the error is, it feels a lot better to give that
specific error to user.
Judging from [1] it doesn't seem that showing usage in this case was
important (the patch was to avoid segfault), and it doesn't fit into how
other commands react to empty pathspec (see for example `git add` with a
custom message).
Therefore, I decided to show new error text in both cases. In order to
continue testing for error early, I moved `parse_pathspec()` higher. Now
it happens before `read_cache()` / `hold_locked_index()` /
`setup_work_tree()`, which shouldn't cause any issues.
[1] Commit 7612a1ef ("git-rm: honor -n flag" 2006-06-09)
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
Code that turns BISECT_INTERNAL_SUCCESS_MERGE_BASE (-11)
to BISECT_OK (0) from `check_good_are_ancestors_of_bad()` has been moved to
`cmd_bisect__helper()`.
Update all callers to handle the error returns.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we want to get rid of git-bisect.sh, it would be necessary
to convert bisect.c exit() calls to return statements so
that errors can be reported. Let's prepare for that by making
it possible to return different error codes than just 0 or 1.
Different error codes might enable a bisecting script calling the
bisect command that uses this function to do different things
depending on the exit status of the bisect command.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's refactor code from bisect_next_check() into a new
decide_next() helper function.
This removes some goto statements and makes the code simpler,
clearer and easier to understand.
While at it `bad_ref` and `good_glob` are not const any more
to void casting them inside `free()`.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's rename variable retval to res, so that variable names
in bisect--helper.c are more consistent.
After this change, there are 110 occurrences of res in the file
and zero of retval, while there were 26 instances of retval before.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a pointer that points at a constant string,
just give name directly to the constant string; this way, we
do not have to allocate a pointer variable in addition to
the string we want to use.
Let's convert `vocab_bad` and `vocab_good` char pointers to char arrays.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ignore has two different modes, and neither of these modes has an
implementation that matches the documentation. These modes differ in
whether they just print paths or whether they also print the final
pattern matched by the path. The fix is different for both modes, so
I'll discuss both separately.
=== First (default) mode ===
The first mode is documented as:
For each pathname given via the command-line or from a file via
--stdin, check whether the file is excluded by .gitignore (or other
input files to the exclude mechanism) and output the path if it is
excluded.
However, it fails to do this because it did not account for negated
patterns. Commands other than check-ignore verify exclusion rules via
calling
... -> treat_one_path() -> is_excluded() -> last_matching_pattern()
while check-ignore has a call path of the form:
... -> check_ignore() -> last_matching_pattern()
The fact that the latter does not include the call to is_excluded()
means that it is susceptible to to messing up negated patterns (since
that is the only significant thing is_excluded() adds over
last_matching_pattern()). Unfortunately, we can't make it just call
is_excluded(), because the same codepath is used by the verbose mode
which needs to know the matched pattern in question. This brings us
to...
=== Second (verbose) mode ===
The second mode, known as verbose mode, references the first in the
documentation and says:
Also output details about the matching pattern (if any) for each
given pathname. For precedence rules within and between exclude
sources, see gitignore(5).
The "Also" means it will print patterns that match the exclude rules as
noted for the first mode, and also print which pattern matches. Unless
more information is printed than just pathname and pattern (which is not
done), this definition is somewhat ill-defined and perhaps even
self-contradictory for negated patterns: A path which matches a negated
exclude pattern is NOT excluded and thus shouldn't be printed by the
former logic, while it certainly does match one of the explicit patterns
and thus should be printed by the latter logic.
=== Resolution ==
Since the second mode exists to find out which pattern matches given
paths, and showing the user a pattern that begins with a '!' is
sufficient for them to figure out whether the pattern is excluded, the
existing behavior is desirable -- we just need to update the
documentation to match the implementation (i.e. it is about printing
which pattern is matched by paths, not about showing which paths are
excluded).
For the first or default mode, users just want to know whether a pattern
is excluded. As such, the existing documentation is desirable; change
the implementation to match the documented behavior.
Finally, also adjust a few tests in t0008 that were caught up by this
discrepancy in how negated paths were handled.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config" learned to show in which "scope", in addition to in
which file, each config setting comes from.
* mr/show-config-scope:
config: add '--show-scope' to print the scope of a config value
submodule-config: add subomdule config scope
config: teach git_config_source to remember its scope
config: preserve scope in do_git_config_sequence
config: clarify meaning of command line scoping
config: split repo scope to local and worktree
config: make scope_name non-static and rename it
t1300: create custom config file without special characters
t1300: fix over-indented HERE-DOCs
config: fix typo in variable name
Memory footprint and performance of "git name-rev" has been
improved.
* rs/name-rev-memsave:
name-rev: sort tip names before applying
name-rev: release unused name strings
name-rev: generate name strings only if they are better
name-rev: pre-size buffer in get_parent_name()
name-rev: factor out get_parent_name()
name-rev: put struct rev_name into commit slab
name-rev: don't _peek() in create_or_update_name()
name-rev: don't leak path copy in name_ref()
name-rev: respect const qualifier
name-rev: remove unused typedef
name-rev: rewrite create_or_update_name()
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A large variety of rebase types are supported by the interactive
machinery, not just the explicitly interactive ones. These all share
the same code and write the same reflog messages, but the "-i" moniker
in those messages doesn't really have much meaning. It also becomes
somewhat distracting once we switch the default from the am-backend to
the interactive one. Just remove the "-i" from these messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, this option doesn't do anything except error out if any
options requiring the interactive-backend are also passed. However,
when we make the default backend configurable later in this series, this
flag will provide a way to override the config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the past, we dis-allowed rebases using the interactive backend from
performing a fast-forward to short-circuit the rebase operation. This
made sense for explicitly interactive rebases and some implicitly
interactive rebases, but certainly became overly stringent when the
merge backend was re-implemented via the interactive backend.
Just as the am-based rebase has always had to disable the fast-forward
based on a variety of conditions or flags (e.g. --signoff, --whitespace,
etc.), we need to do the same but now with a few more options. However,
continuing to use REBASE_FORCE for tracking this is problematic because
the interactive backend used it for a different purpose. (When
REBASE_FORCE wasn't set, the interactive backend would not fast-forward
the whole series but would fast-forward individual "pick" commits at the
beginning of the todo list, and then a squash or something would cause
it to start generating new commits.) So, introduce a new
allow_preemptive_ff flag contained within cmd_rebase() and use it to
track whether we are going to allow a pre-emptive fast-forward that
short-circuits the whole rebase.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
restrict_revision in the original shell script was an excluded revision
range. It is also treated that way by the am-backend. In the
conversion from shell to C (see commit 6ab54d17be ("rebase -i:
implement the logic to initialize $revisions in C", 2018-08-28)), the
interactive-backend accidentally treated it as a positive revision
rather than a negated one.
This was missed as there were no tests in the testsuite that tested an
interactive rebase with fork-point behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
