"git ls-files" can and does show multiple entries when the index is
unmerged, which is a source for confusion unless -s/-u option is in
use. A new option --deduplicate has been introduced.
* zh/ls-files-deduplicate:
ls-files.c: add --deduplicate option
ls_files.c: consolidate two for loops into one
ls_files.c: bugfix for --deleted and --modified
Document, clean-up and optimize the code around the cache-tree
extension in the index.
* ds/cache-tree-basics:
cache-tree: speed up consecutive path comparisons
cache-tree: use ce_namelen() instead of strlen()
index-format: discuss recursion of cache-tree better
index-format: update preamble to cache tree extension
index-format: use 'cache tree' over 'cached tree'
cache-tree: trace regions for prime_cache_tree
cache-tree: trace regions for I/O
cache-tree: use trace2 in cache_tree_update()
unpack-trees: add trace2 regions
tree-walk: report recursion counts
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
When more than one commit with the same patch ID appears on one
side, "git log --cherry-pick A...B" did not exclude them all when a
commit with the same patch ID appears on the other side. Now it
does.
* jk/log-cherry-pick-duplicate-patches:
patch-ids: handle duplicate hashmap entries
Newline characters in the host and path part of git:// URL are
now forbidden.
* jk/forbid-lf-in-git-url:
fsck: reject .gitmodules git:// urls with newlines
git_connect_git(): forbid newlines in host and path
Fix 2.29 regression where "git mergetool --tool-help" fails to list
all the available tools.
* pb/mergetool-tool-help-fix:
mergetool--lib: fix '--tool-help' to correctly show available tools
"git for-each-repo --config=<var> <cmd>" should not run <cmd> for
any repository when the configuration variable <var> is not defined
even once.
* ds/for-each-repo-noopfix:
for-each-repo: do nothing on empty config
Some tests expect that "ls -l" output has either '-' or 'x' for
group executable bit, but setgid bit can be inherited from parent
directory and make these fields 'S' or 's' instead, causing test
failures.
* mt/t4129-with-setgid-dir:
t4129: don't fail if setgid is set in the test directory
"git stash" did not work well in a sparsely checked out working
tree.
* en/stash-apply-sparse-checkout:
stash: fix stash application in sparse-checkouts
stash: remove unnecessary process forking
t7012: add a testcase demonstrating stash apply bugs in sparse checkouts
Teach Git to use the "unborn" feature introduced in a previous patch as
follows: Git will always send the "unborn" argument if it is supported
by the server. During "git clone", if cloning an empty repository, Git
will use the new information to determine the local branch to create. In
all other cases, Git will ignore it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning, we choose the default branch based on the remote HEAD.
But if there is no remote HEAD reported (which could happen if the
target of the remote HEAD is unborn), we'll fall back to using our local
init.defaultBranch. Traditionally this hasn't been a big deal, because
most repos used "master" as the default. But these days it is likely to
cause confusion if the server and client implementations choose
different values (e.g., if the remote started with "main", we may choose
"master" locally, create commits there, and then the user is surprised
when they push to "master" and not "main").
To solve this, the remote needs to communicate the target of the HEAD
symref, even if it is unborn, and "git clone" needs to use this
information.
Currently, symrefs that have unborn targets (such as in this case) are
not communicated by the protocol. Teach Git to advertise and support the
"unborn" feature in "ls-refs" (by default, this is advertised, but
server administrators may turn this off through the lsrefs.unborn
config). This feature indicates that "ls-refs" supports the "unborn"
argument; when it is specified, "ls-refs" will send the HEAD symref with
the name of its unborn target.
This change is only for protocol v2. A similar change for protocol v0
would require independent protocol design (there being no analogous
position to signal support for "unborn") and client-side plumbing of the
data required, so the scope of this patch set is limited to protocol v2.
The client side will be updated to use this in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up plus UI improvement by hiding extra refs that
the prefetch task uses from "log --decorate" output.
* ds/maintenance-prefetch-cleanup:
t7900: clean up some broken refs
maintenance: set log.excludeDecoration durin prefetch
The following sequence leads to a "BUG" assertion running under MacOS:
DIR=git-test-restore-p
Adiarnfd=$(printf 'A\314\210')
DIRNAME=xx${Adiarnfd}yy
mkdir $DIR &&
cd $DIR &&
git init &&
mkdir $DIRNAME &&
cd $DIRNAME &&
echo "Initial" >file &&
git add file &&
echo "One more line" >>file &&
echo y | git restore -p .
Initialized empty Git repository in /tmp/git-test-restore-p/.git/
BUG: pathspec.c:495: error initializing pathspec_item
Cannot close git diff-index --cached --numstat
[snip]
The command `git restore` is run from a directory inside a Git repo.
Git needs to split the $CWD into 2 parts:
The path to the repo and "the rest", if any.
"The rest" becomes a "prefix" later used inside the pathspec code.
As an example, "/path/to/repo/dir-inside-repå" would determine
"/path/to/repo" as the root of the repo, the place where the
configuration file .git/config is found.
The rest becomes the prefix ("dir-inside-repå"), from where the
pathspec machinery expands the ".", more about this later.
If there is a decomposed form, (making the decomposing visible like this),
"dir-inside-rep°a" doesn't match "dir-inside-repå".
Git commands need to:
(a) read the configuration variable "core.precomposeunicode"
(b) precocompose argv[]
(c) precompose the prefix, if there was any
The first commit,
76759c7dff "git on Mac OS and precomposed unicode"
addressed (a) and (b).
The call to precompose_argv() was added into parse-options.c,
because that seemed to be a good place when the patch was written.
Commands that don't use parse-options need to do (a) and (b) themselfs.
The commands `diff-files`, `diff-index`, `diff-tree` and `diff`
learned (a) and (b) in
commit 90a78b83e0 "diff: run arguments through precompose_argv"
Branch names (or refs in general) using decomposed code points
resulting in decomposed file names had been fixed in
commit 8e712ef6fc "Honor core.precomposeUnicode in more places"
The bug report from above shows 2 things:
- more commands need to handle precomposed unicode
- (c) should be implemented for all commands using pathspecs
Solution:
precompose_argv() now handles the prefix (if needed), and is renamed into
precompose_argv_prefix().
Inside this function the config variable core.precomposeunicode is read
into the global variable precomposed_unicode, as before.
This reading is skipped if precomposed_unicode had been read before.
The original patch for preocomposed unicode, 76759c7dff, placed
precompose_argv() into parse-options.c
Now add it into git.c::run_builtin() as well. Existing precompose
calls in diff-files.c and others may become redundant, and if we
audit the callflows that reach these places to make sure that they
can never be reached without going through the new call added to
run_builtin(), we might be able to remove these existing ones.
But in this commit, we do not bother to do so and leave these
precompose callsites as they are. Because precompose() is
idempotent and can be called on an already precomposed string
safely, this is safer than removing existing calls without fully
vetting the callflows.
There is certainly room for cleanups - this change intends to be a bug fix.
Cleanups needs more tests in e.g. t/t3910-mac-os-precompose.sh, and should
be done in future commits.
[1] git-bugreport-2021-01-06-1209.txt (git can't deal with special characters)
[2] https://lore.kernel.org/git/A102844A-9501-4A86-854D-E3B387D378AA@icloud.com/
Reported-by: Daniel Troger <random_n0body@icloud.com>
Helped-By: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a few leftover improvements from the review of ad5df6b782
(upload-pack.c: fix filter spec quoting bug).
1. Instead of enumerating objects reachable from HEAD, enumerate all
reachable objects, because HEAD has not special significance in this
test.
2. Instead of relying on the knowledge that "? in rev-list output
means partial clone", explicitly verify that there are no blobs with
cat-file.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git invokes a pager that exits with non-zero the common case is
that we'll already return the correct SIGPIPE failure from git itself,
but the exit code logged in trace2 has always been incorrectly
reported[1]. Fix that and log the correct exit code in the logs.
Since this gives us something to test outside of our recently-added
tests needing a !MINGW prerequisite, let's refactor the test to run on
MINGW and actually check for SIGPIPE outside of MINGW.
The wait_or_whine() is only called with a true "in_signal" from from
finish_command_in_signal(), which in turn is only used in pager.c.
The "in_signal && !WIFEXITED(status)" case is not covered by
tests. Let's log the default -1 in that case for good measure.
1. The incorrect logging of the exit code in was seemingly copy/pasted
into finish_command_in_signal() in ee4512ed48 (trace2: create new
combined trace facility, 2019-02-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for how git behaves when the pager itself exits with
non-zero, as well as for us exiting with 141 when we're killed with
SIGPIPE due to the pager not consuming its output.
There is some recent discussion[1] about these semantics, but aside
from what we want to do in the future, we should have a test for the
current behavior.
This test construct is stolen from 7559a1be8a (unblock and unignore
SIGPIPE, 2014-09-18). The reason not to make the test itself depend on
the MINGW prerequisite is to make a subsequent commit easier to read.
1. https://lore.kernel.org/git/87o8h4omqa.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before checking if the repository has a commit-graph loaded, be sure
to run prepare_commit_graph(). This is necessary because otherwise
the topo_levels slab is not initialized. As we compute topo_levels for
the new commits, we iterate further into the lower layers since the
first visit to each commit looks as though the topo_level is not
populated.
By properly initializing the topo_slab, we fix the previously broken
case of a split commit graph where a base layer has the
generation_data_overflow chunk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a subtle failure happening when computing corrected commit
dates with --split enabled. It requires a base layer needing the
generation_data_overflow chunk. Then, the next layer on top
erroneously thinks it needs an overflow chunk due to a bug leading
to recalculating all reachable generation numbers. The output of
the failure is
BUG: commit-graph.c:1912: expected to write 8 bytes to
chunk 47444f56, but wrote 0 instead
These "expected" 8 bytes are due to re-computing the corrected
commit date for the lower layer but the new layer does not need
any overflow.
Add a test to t5318-commit-graph.sh that demonstrates this bug. However,
it does not trigger consistently with the existing code.
The generation number data is stored in a slab and accessed by
commit_graph_data_at(). This data is initialized when parsing a commit,
but is otherwise used assuming it has been populated. The loop in
compute_generation_numbers() did not enforce that all reachable
commits were parsed and had correct values. This could lead to some
problems when writing a commit-graph with corrected commit dates based
on a commit-graph without them.
It has been difficult to identify the issue here because it was so hard
to reproduce. It relies on this uninitialized data having a non-zero
value, but also on specifically in a way that overwrites the existing
data.
This patch adds the extra parse to ensure the data is filled before we
compute the generation number of a commit. This triggers the new test
to fail because the generation number overflow count does not match
between this computation and the write for that chunk.
The actual fix will follow as the next few changes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case added by 9466e3809d ("blame: enable funcname blaming with
userdiff driver", 2020-11-01) forgot to quote variable expansions. This
causes failures when the current directory contains blanks.
One variable that the test case introduces will not have IFS characters
and could remain without quotes, but let's quote all expansions for
consistency, not just the one that has the path name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
$ git worktree list
/path/to/main aba123 [main]
/path/to/linked 123abc [branch-a]
/path/to/prunable ace127 (detached HEAD) prunable
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
$ git worktree list --porcelain
...
worktree /path/to/locked
HEAD 123abcdea123abcd123acbd123acbda123abcd12
detached
locked
worktree /path/to/locked-with-reason
HEAD abc123abc123abc123abc123abc123abc123abc1
detached
locked reason why it is locked
...
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
$ git worktree list --porcelain
...
locked "worktree's path mounted in\nremovable device"
...
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) introduced a new test to ensure locked worktrees are listed
with "locked" annotation. However, the test does not clean up after
itself as "git worktree prune" is not going to remove the locked worktree
in the first place. This not only leaves the test in an unclean state it
also potentially breaks following tests that rely on the
"git worktree list" output.
Let's fix that by unlocking the worktree before the "prune" command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the commit subject starts with "amend!" then rearrange it like a
"fixup!" commit and replace `pick` command with `fixup -C` command,
which is used to fixup up the content if any and replaces the original
commit message with amend! commit's message.
Original-patch-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When squashing commit messages the squash!/fixup! subjects are not of
interest so comment them out to stop them becoming part of the final
message.
This change breaks a bunch of --autosquash tests which rely on the
"squash! <subject>" line appearing in the final commit message. This is
addressed by adding a second line to the commit message of the "squash!
..." commits and testing for that.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "1~5" isn't portable. Nobody seems to have noticed, since perhaps
people don't tend to run the perf suite on more exotic platforms. Still,
it's better to set a good example.
We can use:
perl -ne 'print if $. % 5 == 1'
instead. But we can further observe that perl does a good job of the
other parts of this pipeline, and fold the whole thing together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, the test suite can be run with 'GIT_TEST_WRITE_REV_INDEX=1'
in the environment, which causes all operations which write a pack to
also write a .rev file.
To prepare for when that eventually becomes the default, we should
continue to test the in-memory reverse index, too, in order to avoid
losing existing coverage. Unfortunately, explicit existing coverage is
rather sparse, so only a basic test is added that compares the result of
git rev-list --objects --no-object-names --all |
git cat-file --batch-check='%(objectsize:disk) %(objectname)'
with and without an on-disk reverse index.
Suggested-by: Jeff King <peff@peff.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we expand a user-format, we try to avoid work that isn't necessary
for the output. For instance, we don't bother parsing the commit header
until we know we need the author, subject, etc.
But we do always load the commit object's contents from disk, even if
the format doesn't require it (e.g., just "%H"). Traditionally this
didn't matter much, because we'd have loaded it as part of the traversal
anyway, and we'd typically have those bytes attached to the commit
struct (or these days, cached in a commit-slab).
But when we have a commit-graph, we might easily get to the point of
pretty-printing a commit without ever having looked at the actual object
contents. We should push off that load (and reencoding) until we're
certain that it's needed.
I think the results of p4205 show the advantage pretty clearly (we serve
parent and tree oids out of the commit struct itself, so they benefit as
well):
# using git.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 0.40(0.39+0.01) 0.03(0.02+0.01) -92.5%
4205.2: log with %h 0.45(0.44+0.01) 0.09(0.09+0.00) -80.0%
4205.3: log with %T 0.40(0.39+0.00) 0.04(0.04+0.00) -90.0%
4205.4: log with %t 0.46(0.46+0.00) 0.09(0.08+0.01) -80.4%
4205.5: log with %P 0.39(0.39+0.00) 0.03(0.03+0.00) -92.3%
4205.6: log with %p 0.46(0.46+0.00) 0.10(0.09+0.00) -78.3%
4205.7: log with %h-%h-%h 0.52(0.51+0.01) 0.15(0.14+0.00) -71.2%
4205.8: log with %an-%ae-%s 0.42(0.41+0.00) 0.42(0.41+0.01) +0.0%
# using linux.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 7.12(6.97+0.14) 0.76(0.65+0.11) -89.3%
4205.2: log with %h 7.35(7.19+0.16) 1.30(1.19+0.11) -82.3%
4205.3: log with %T 7.58(7.42+0.15) 1.02(0.94+0.08) -86.5%
4205.4: log with %t 8.05(7.89+0.15) 1.55(1.41+0.13) -80.7%
4205.5: log with %P 7.12(7.01+0.10) 0.76(0.69+0.07) -89.3%
4205.6: log with %p 7.38(7.27+0.10) 1.32(1.20+0.12) -82.1%
4205.7: log with %h-%h-%h 7.81(7.67+0.13) 1.79(1.67+0.12) -77.1%
4205.8: log with %an-%ae-%s 7.90(7.74+0.15) 7.81(7.66+0.15) -1.1%
I added the final test to show where we don't improve (the 1% there is
just lucky noise), but also as a regression test to make sure we're not
doing anything stupid like loading the commit multiple times when there
are several placeholders that need it.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 6e98de72c0 (sequencer (rebase -i): add support for the 'fixup' and
'squash' commands, 2017-01-02), this developer introduced a change of
behavior by mistake: when encountering a `fixup!` commit (or multiple
`fixup!` commits) without any `squash!` commit thrown in, the final `git
commit` was invoked with `--cleanup=strip`. Prior to that commit, the
commit command had been called without that `--cleanup` option.
Since we explicitly read the original commit message from a file in that
case, there is really no sense in forcing that clean-up.
We actually need to actively suppress that clean-up lest a configured
`commit.cleanup` may interfere with what we want to do: leave the commit
message unchanged.
Reported-by: Vojtěch Knyttl <vojtech@knyt.tl>
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use the sub-test helpers, we end up defining one shell snippet
inside another shell snippet. So if we use single-quotes for the outer
snippet, we have to use double-quotes within the inner snippet (it's
included as here-doc within the outer snippet, but using a single quote
would end the outer snippet early). Or vice versa we can use double
quotes for the outer snippet, but then single quotes in the inner.
We have some of each in the script, and neither is wrong. But it would
be nice to be consistent unless there is a good reason not to. Using
single quotes for the outer script is preferable, because it requires
less metacharacter quoting overall. For example, in:
test_expect_success 'outer' '
run_sub_test_lib_test ... <<-\EOF
echo $foo &&
test_expect_success "inner" "
echo \$bar
"
EOF
'
we need only quote inside "inner", but not inside "outer" or the
here-doc. Whereas if we flip them, we have to quote in both places:
test_expect_success 'outer' "
run_sub_test_lib_test ... <<-\EOF
echo \$foo &&
test_expect_success 'inner' '
echo \$bar
'
EOF
"
The exception is when we need a literal single-quote in an expected
output here-doc. There we can either use outer double-quotes, or just
use ${SQ} within the doc. I chose the latter for consistency (within
this test, but also with other test scripts that face the same problem).
There is one other interesting case, which is some tests that do:
test_expect_success ... "
do_something --run='"'!3'"'
"
This is rather confusing to read, but is correct. The outer script sees
'!3' in single-quotes, as does the eval'd snippet. This is perhaps being
overly cautious. In many interactive shells, an exclamation triggers
history expansion even inside double quotes, but that is not generally
true in non-interactive shells.
There's some conflicting information here. Commit 784ce03d55 (t4216:
avoid unnecessary subshell in test_bloom_filters_not_used, 2020-05-19)
reports it as a problem with OpenBSD 6.7's /bin/sh. However, we have
many instances in this script of prereqs like !LAZY_TRUE, which haven't
been a problem. I left them un-escaped here to test out this theory.
It's much nicer if we can not worry about this as a portability issue,
so it's worth knowing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our check of test_when_finished is done directly in the main script, and
if we failed to clean, we complain and exit immediately. It's nicer to
signal a test failure here, for a few reasons:
- this gives better output to the user when run under a TAP harness
like "prove"
- constency; it's the only test left in the file that behaves this way
- half of its "if" conditional is nonsense anyway; it picked up a
reference to GIT_TEST_FAIL_PREREQS_INTERNAL in dfe1a17df9 (tests:
add a special setup where prerequisites fail, 2019-05-13) along with
its neighbors, even though it has nothing to do with that flag
We could actually do this without a sub-test at all, and just put our
two tests (one to do cleanup, and one to check that it happened) in the
main script. But doing it in a subtest is conceptually cleaner (from the
perspective of the main test script, we are checking only one thing),
and it remains consistent with the "cleanup when failing" test directly
after it, which has to happen in a sub-test (to avoid the main script
complaining of the failed test).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We test the behavior of prerequisites in t0000 by setting up fake ones
in the main test script, trying to run some tests, and then seeing if
those tests impacted the environment correctly. If they didn't, then we
write a message and manually call exit.
Instead, let's push these down into a sub-test, like many of the other
tests covering the framework itself. This has a few advantages:
- it does not pollute the test output with mention of skipped tests
(that we know are uninteresting -- the point of the test was to see
that these are skipped).
- when running in a TAP harness, we get a useful test failure message
(whereas when the script exits early, a tool like "prove" simply
says "Dubious, test returned 1").
- we do not have to worry about different test environments, such as
when GIT_TEST_FAIL_PREREQS_INTERNAL is set. Our sub-test helpers
already give us a known environment.
- the tests themselves are a bit easier to read, as we can just check
the test-framework output to see what happened (and get the usual
test_cmp diff if it failed)
A few notes on the implementation:
- we could do one sub-test per each individual test_expect_success. I
broke it up here into a few logical groups, as I think this makes it
more readable
- the original tests modified environment variables inside the test
bodies. Instead, I've used "true" as the body of a test we expect to
run and "false" otherwise. Technically this does not confirm that
the body of the "true" test actually ran. We are trusting the
framework output to believe that it truly ran, which is sufficient
for these tests. And I think the end result is much simpler to
follow.
- the nested_prereq test uses a few bare "test -f" calls; I converted
these to our usual test_path_is_* helpers while moving the code
around.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check that test_when_finished cleans up after a test, and that it
runs even after a failure. Those two were originally adjacent, but got
split apart by the new test added in 477dcaddb6 (tests: do not let lazy
prereqs inside `test_expect_*` turn off tracing, 2020-03-26), and then
further by more lazy-prereq tests. Let's move them back together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in upload-pack.c that occurs when you combine partial
clone and uploadpack.packObjectsHook. You can reproduce it as
follows:
git clone -u 'git -c uploadpack.allowfilter '\
'-c uploadpack.packobjectshook=env '\
'upload-pack' --filter=blob:none --no-local \
src.git dst.git
Be careful with the line endings because this has a long quoted
string as the -u argument.
The error I get when I run this is:
Cloning into '/tmp/broken'...
remote: fatal: invalid filter-spec ''blob:none''
error: git upload-pack: git-pack-objects died with error.
fatal: git upload-pack: aborting due to possible repository corruption on the remote side.
remote: aborting due to possible repository corruption on the remote side.
fatal: early EOF
fatal: index-pack failed
The problem is caused by unneeded quoting.
This bug was already present in 10ac85c785 (upload-pack: add object
filtering for partial clone, 2017-12-08) when the server side filter
support was introduced. In fact, in 10ac85c785 this was broken
regardless of uploadpack.packObjectsHook. Then in 0b6069fe0a
(fetch-pack: test support excluding large blobs, 2017-12-08) the
quoting was removed but only behind a conditional that depends on
whether uploadpack.packObjectsHook is set.
Because uploadpack.packObjectsHook is apparently rarely used, nobody
noticed the problematic quoting could still happen.
Remove the conditional quoting and add a test for partial clone in
t5544-pack-objects-hook.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'./t1234-foo.sh --stress-jobs=X ...' is supposed to run that test
script in X parallel jobs, but the number of jobs specified on the
command line is entirely ignored if other '--stress'-related options
follow. I.e. both './t1234-foo.sh --stress-jobs=X --stress-limit=Y'
and './t1234-foo.sh --stress-jobs=X --stress' fall back to using twice
the number of CPUs parallel jobs instead.
The former has been broken since commit de69e6f6c9 (tests: let
--stress-limit=<N> imply --stress, 2019-03-03) [1], which started to
unconditionally overwrite the $stress variable holding the specified
number of jobs in its effort to imply '--stress'. The latter has been
broken since f545737144 (tests: introduce --stress-jobs=<N>,
2019-03-03), because it didn't consider that handling '--stress' will
overwrite that variable as well.
We could fix this by being more careful about (over)writing that
$stress variable and checking first whether it has already been set.
But I think it's cleaner to use a dedicated variable to hold the
number of specified parallel jobs, so let's do that instead.
[1] In de69e6f6c9 there was no '--stress-jobs=X' option yet, the
number of parallel jobs had to be specified via '--stress=X', so,
strictly speaking, de69e6f6c9 broke './t1234-foo.sh --stress=X
--stress-limit=Y'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an on-disk reverse index exists, there is no need to generate one
in memory. In fact, doing so can be slow, and require large amounts of
the heap.
Let's make sure that we treat the on-disk reverse index with precedence
(i.e., that when it exists, we don't bother trying to generate an
equivalent one in memory) by teaching Git how to conditionally die()
when generating a reverse index in memory.
Then, add a test to ensure that when (a) an on-disk reverse index
exists, and (b) when setting GIT_TEST_REV_INDEX_DIE_IN_MEMORY, that we
do not die, implying that we read from the on-disk one.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option that unconditionally enables the pack.writeReverseIndex
setting in order to run the whole test suite in a mode that generates
on-disk reverse indexes. Additionally, enable this mode in the second
run of tests under linux-gcc in 'ci/run-build-and-tests.sh'.
Once on-disk reverse indexes are proven out over several releases, we
can change the default value of that configuration to 'true', and drop
this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we'll add support for unconditionally enabling the
'pack.writeReverseIndex' setting with a new GIT_TEST_WRITE_REV_INDEX
environment variable.
This causes a little bit of fallout with tests that, for example,
compare the list of files in the pack directory being unprepared to see
.rev files in its output.
Those locations can be cleaned up to look for specific file extensions,
rather than take everything in the pack directory (for instance) and
then grep out unwanted items.
Once the pack.writeReverseIndex option has been thoroughly
tested, we will default it to 'true', removing GIT_TEST_WRITE_REV_INDEX,
and making it possible to revert this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have an implementation that can write the new reverse index
format, enable writing a .rev file in 'git pack-objects' by consulting
the pack.writeReverseIndex configuration variable.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git index-pack' to optionally write and verify reverse index with
'--[no-]rev-index', as well as respecting the 'pack.writeReverseIndex'
configuration option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
