Disambiguation logic to tell revisions and pathspec apart has been
tweaked so that backslash-escaped glob special characters do not
count in the "wildcards are pathspec" rule.
* jk/escaped-wildcard-dwim:
verify_filename(): handle backslashes in "wildcards are pathspecs" rule
In t0000, more precisely in its `test_bool_env` test case, there are two
subshells that are supposed to fail. To be even _more_ precise, they
fail by calling the `error` function, and that is okay, because it is in
a subshell, and it is expected that those two subshell invocations fail.
However, the `error` function also tries to finalize the JUnit XML (if
that XML was asked for, via `--write-junit-xml`. As a consequence, the
XML is edited to add a `time` attribute for the `testsuite` tag. And
since there are two expected `error` calls in addition to the final
`test_done`, the `finalize_junit_xml` function is called three times and
naturally the `time` attribute is added _three times_.
Azure Pipelines is not happy with that, complaining thusly:
##[warning]Failed to read D:\a\1\s\t\out\TEST-t0000-basic.xml. Error : 'time' is a duplicate attribute name. Line 2, position 82..
One possible way to address this would be to unset `write_junit_xml` in
the `test_bool_env` test case.
But that would be fragile, as other `error` calls in subshells could be
introduced.
So let's just modify `finalize_junit_xml` to remove any `time` attribute
before adding the authoritative one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This results in shorter output, and is _probably_ more portable. There
is at least one environment (GitHub Actions) which supports 16-color
mode but not 256-color mode. It's possible there are environments
which go the other way, but it seems unlikely.
Signed-off-by: Eyal Soha <shawarmakarma@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These colors are the bright variants of the 3-bit colors. Instead of
30-37 range for the foreground and 40-47 range for the background,
they live in 90-97 and 100-107 range, respectively.
Signed-off-by: Eyal Soha <shawarmakarma@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RFC822 and friends allow arbitrary whitespace after the colon of a
header and before the values. I.e.:
Subject:foo
Subject: foo
Subject: foo
all have the subject "foo". But mailinfo requires exactly one space.
This doesn't seem to be bothering anybody, but it is pickier than the
standard specifies. And we can easily just soak up arbitrary whitespace
there in our parser, so let's do so.
Note that the test covers both too little and too much whitespace, but
the "too much" case already works fine (because we later eat leading and
trailing whitespace from the values).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --fork-point master" used to work OK, as it internally
called "git merge-base --fork-point" that knew how to handle short
refname and dwim it to the full refname before calling the
underlying get_fork_point() function.
This is no longer true after the command was rewritten in C, as its
internall call made directly to get_fork_point() does not dwim a
short ref.
Move the "dwim the refname argument to the full refname" logic that
is used in "git merge-base" to the underlying get_fork_point()
function, so that the other caller of the function in the
implementation of "git rebase" behaves the same way to fix this
regression.
Signed-off-by: Alex Torok <alext9@gmail.com>
[jc: revamped the fix and used Alex's tests]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using Windows, a user may run 'git sparse-checkout set A\B\C'
to add the Unix-style path A/B/C to their sparse-checkout patterns.
Normalizing the input path converts the backslashes to slashes before we
add the string 'A/B/C' to the recursive hashset.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the sparse-checkout feature, a user may want to incrementally
grow their sparse-checkout pattern set. Allow adding patterns using a
new 'add' subcommand. This is not much different from the 'set'
subcommand, because we still want to allow the '--stdin' option and
interpret inputs as directories when in cone mode and patterns
otherwise.
When in cone mode, we are growing the cone. This may actually reduce the
set of patterns when adding directory A when A/B is already a directory
in the cone. Test the different cases: siblings, parents, ancestors.
When not in cone mode, we can only assume the patterns should be
appended to the sparse-checkout file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote with
git remote rename X Y
git remote remove X
Git already renames or removes any branch.<name>.remote and
branch.<name>.pushRemote configurations if their value is X.
However remote.pushDefault needs a more gentle approach, as this may be
set in a non-repo configuration file. In such a case only a warning is
printed, such as:
warning: The global configuration remote.pushDefault in:
$HOME/.gitconfig:35
now names the non-existent remote origin
It is changed to remote.pushDefault = Y or removed when set in a repo
configuration though.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users are nowadays trained to see message from CLI tools in the form
<file>:<lno>: …
To be able to give such messages when notifying the user about
configurations in any config file, it is currently only possible to get
the file name (if the value originates from a file to begin with) via
`current_config_name()`. Now it is also possible to query the current line
number for the configuration.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming or removing a remote with
git remote rename X Y
git remote remove X
Git already renames/removes any config values from
branch.<name>.remote = X
to
branch.<name>.remote = Y
As branch.<name>.pushRemote also names a remote, it now also renames
or removes these config values from
branch.<name>.pushRemote = X
to
branch.<name>.pushRemote = Y
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user queries config values with --show-origin, often it's
difficult to determine what the actual "scope" (local, global, etc.) of
a given value is based on just the origin file.
Teach 'git config' the '--show-scope' option to print the scope of all
displayed config values. Note that we should never see anything of
"submodule" scope as that is only ever used by submodule-config.c when
parsing the '.gitmodules' file.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CONFIG_SCOPE_CMDLINE is generally used in the code to refer to config
values passed in via the -c option. Options passed in using this
mechanism share similar scoping characteristics with the --file and
--blob options of the 'config' command, namely that they are only in use
for that single invocation of git, and that they supersede the normal
system/global/local hierarchy. This patch introduces
CONFIG_SCOPE_COMMAND to reflect this new idea, which also makes
CONFIG_SCOPE_CMDLINE redundant.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously when iterating through git config variables, worktree config
and local config were both considered "CONFIG_SCOPE_REPO". This was
never a problem before as no one had needed to differentiate between the
two cases, but future functionality may care whether or not the config
options come from a worktree or from the repository's actual local
config file. For example, the planned feature to add a '--show-scope'
to config to allow a user to see which scope listed config options come
from would confuse users if it just printed 'repo' rather than 'local'
or 'worktree' as the documentation would lead them to expect. As well
as the additional benefit of making the implementation look more like
how the documentation describes the interface.
To accomplish this we split out what was previously considered repo
scope to be local and worktree.
The clients of 'current_config_scope()' who cared about
CONFIG_SCOPE_REPO are also modified to similarly care about
CONFIG_SCOPE_WORKTREE and CONFIG_SCOPE_LOCAL to preserve previous behavior.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for the upcoming --show-scope option, we require the ability
to convert a config_scope enum to a string. As this was originally
implemented as a static function 'scope_name()' in
t/helper/test-config.c, we expose it via config.h and give it a less
ambiguous name 'config_scope_name()'
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make this test work with SHA-256, compute two of the items in the
conflicted index entry. The other entry is a conflict within a conflict
and computing it is difficult, so use test_oid_cache to specify the
proper values for both hash algorithms.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding the length of an object ID when creating a tree,
compute it for the hash in use using the translation tables.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test used an object ID which was 40 hex characters in length,
causing the test not only not to pass, but to hang, when run with
SHA-256 as the hash. Change this value to a fixed dummy object ID using
test_oid_init and test_oid.
Furthermore, ensure we extract an object ID of the appropriate length
using cut with fields instead of a fixed length.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch two tests to use $ZERO_OID to represent the all-zeros object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test contains a large number of data files, mostly using the same
object ID values for refs. Instead of producing two separate sets of
test files, keep the test files using SHA-1 and translate them on the
fly by replacing the SHA-1 values with the values for the current hash
algorithm in use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the proper pack constants defined in lib-pack.sh to make this test
work with SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make this test hash independent by computing the length of the object
offsets and looking up values which will hash to object IDs with the
right properties.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the proper pack constants defined in lib-pack.sh to make this test
work with SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compute the length of object IDs and pack offsets instead of hard-coding
constants.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this test, there are two main types of object IDs we see in the
diffs: the ones for the submodules, which we care about, and the ones
for the individual files, which are unrelated to what we're testing.
Much of the test already computes the former, so extend the rest of the
test to do so as well. Add a diff comparison function that normalizes
the differences in the latter, since they're not explicitly what we're
testing.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are already files containing example output for SHA-1. Add test
files providing example output for SHA-256 as well and adjust the test
to look up the appropriate ones based on the algorithm in use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding SHA-256 support to this test, let's move the
SHA-1-specific expected output into a directory called "sha1". This
will allow us to add a similar directory for SHA-256 as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test produces a large number of diff formats and compares the
output with test files that have content specific to SHA-1. Since we are
more interested in the format of the diffs, and not their specific
values, which are tested elsewhere, add a function which uses sed to
transform these specific object IDs into generic ones of the right size,
which we can then compare.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the hard-coded SHA-1 constants with the use of test_oid to look
up an appropriate constant for each hash algorithm. In addition, adjust
the fanout checks to look for either zero or one slashes in the filename
without needing to check for an explicit length.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the hard-coded SHA-1 constants with the use of test_oid to look
up an appropriate constant for each hash algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the hard-coded SHA-1 constants with the use of test_oid to look
up an appropriate constant for each hash algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the hard-coded SHA-1 constants with the use of test_oid to look
up an appropriate constant for each hash algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the one assertion in this test that still uses SHA-1 to use test_oid
to be independent of the hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the support routines for generating packs to support both SHA-1
and SHA-256. Compute the trailing pack checksum and its length
correctly depending on the algorithm, and look up the object names based
on the algorithm as well. Ensure we initialize the algorithm facts so
that our callers need not do so.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
advice.addNothing config variable is used to control the visibility of
two advice messages in the add library. This config variable is
replaced by two new variables, whose names are more clear and relevant
to the two cases.
Also add the two new variables to the documentation.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--recurse-submodules" option of various subcommands did not
work well when run in an alternate worktree, which has been
corrected.
* pb/recurse-submodule-in-worktree-fix:
submodule.c: use get_git_dir() instead of get_git_common_dir()
t2405: clarify test descriptions and simplify test
t2405: use git -C and test_commit -C instead of subshells
t7410: rename to t2405-worktree-submodule.sh
Corner case bugs in "git clean" that stems from a (necessarily for
performance reasons) awkward calling convention in the directory
enumeration API has been corrected.
* en/fill-directory-fixes-more:
dir: point treat_leading_path() warning to the right place
dir: restructure in a way to avoid passing around a struct dirent
dir: treat_leading_path() and read_directory_recursive(), round 2
clean: demonstrate a bug with pathspecs
Preparation of test scripts for the day when the object names will
use SHA-256 continues.
* bc/hash-independent-tests-part-7:
t5604: make hash independent
t5601: switch into repository to hash object
t5562: use $ZERO_OID
t5540: make hash size independent
t5537: make hash size independent
t5530: compute results based on object length
t5512: abstract away SHA-1-specific constants
t5510: make hash size independent
t5504: make hash algorithm independent
t5324: make hash size independent
t5319: make test work with SHA-256
t5319: change invalid offset for SHA-256 compatibility
t5318: update for SHA-256
t4300: abstract away SHA-1-specific constants
t4204: make hash size independent
t4202: abstract away SHA-1-specific constants
t4200: make hash size independent
t4134: compute appropriate length constant
t4066: compute index line in diffs
t4054: make hash-size independent
"git checkout X" did not correctly fail when X is not a local
branch but could name more than one remote-tracking branches
(i.e. to be dwimmed as the starting point to create a corresponding
local branch), which has been corrected.
* am/checkout-file-and-ref-ref-ambiguity:
checkout: don't revert file on ambiguous tracking branches
parse_branchname_arg(): extract part as new function
The final leg of rewriting "add -i/-p" in C.
* js/add-p-leftover-bits:
ci: include the built-in `git add -i` in the `linux-gcc` job
built-in add -p: handle Escape sequences more efficiently
built-in add -p: handle Escape sequences in interactive.singlekey mode
built-in add -p: respect the `interactive.singlekey` config setting
terminal: add a new function to read a single keystroke
terminal: accommodate Git for Windows' default terminal
terminal: make the code of disable_echo() reusable
built-in add -p: handle diff.algorithm
built-in add -p: support interactive.diffFilter
t3701: adjust difffilter test
Test clean-up.
* dl/test-must-fail-fixes:
t1507: inline full_name()
t1507: run commands within test_expect_success
t1507: stop losing return codes of git commands
t1501: remove use of `test_might_fail cp`
t1409: use test_path_is_missing()
t1409: let sed open its own input file
t1307: reorder `nongit test_must_fail`
t1306: convert `test_might_fail rm` to `rm -f`
t0020: use ! check_packed_refs_marked
t0020: don't use `test_must_fail has_cr`
t0003: don't use `test_must_fail attr_check`
t0003: use test_must_be_empty()
t0003: use named parameters in attr_check()
t0000: replace test_must_fail with run_sub_test_lib_test_err()
t/lib-git-p4: use test_path_is_missing()
When we're resolving a REF_DELTA, we compare-and-swap its type from
REF_DELTA to whatever real type the base object has, as discussed in
ab791dd138 (index-pack: fix race condition with duplicate bases,
2014-08-29). If the old type wasn't a REF_DELTA, we consider that a
BUG(). But as discussed in that commit, we might see this case whenever
we try to resolve an object twice, which may happen because we have
multiple copies of the base object.
So this isn't a bug at all, but rather a sign that the input pack is
broken. And indeed, this case is triggered already in t5309.5 and
t5309.6, which create packs with delta cycles and duplicate bases. But
we never noticed because those tests are marked expect_failure.
Those tests were added by b2ef3d9ebb (test index-pack on packs with
recoverable delta cycles, 2013-08-23), which was leaving the door open
for cases that we theoretically _could_ handle. And when we see an
already-resolved object like this, in theory we could keep going after
confirming that the previously resolved child->real_type matches
base->obj->real_type. But:
- enforcing the "only resolve once" rule here saves us from an
infinite loop in other parts of the code. If we keep going, then the
delta cycle in t5309.5 causes us to loop infinitely, as
find_ref_delta_children() doesn't realize which objects have already
been resolved. So there would be more changes needed to make this
case work, and in the meantime we'd be worse off.
- any pack that triggers this is broken anyway. It either has a
duplicate base object, or it has a cycle which causes us to bring in
a duplicate via --fix-thin. In either case, we'd end up rejecting
the pack in write_idx_file(), which also detects duplicates.
So the tests have little value in documenting what we _could_ be doing
(and have been neglected for 6+ years). Let's switch them to confirming
that we handle this case cleanly (and switch out the BUG() for a more
informative die() so that we do so).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the previous commit, the nature of the fanout heuristic
in the notes code causes the exact point at which we increase or
decrease the notes fanout to vary with the objects being annotated.
Since the object ids generated by the test environment are
deterministic (by design), the notes generated and tested by t3305
are always the same, and we therefore happen to see the same fanout
behavior from one run to the next.
Coincidentally, if we were to change the test environment slightly
(say by making a test commit on an unrelated branch before we start
the t3305 test proper), we not only see the fanout switch happen at
different points, we also manage to trigger a _bug_ in the notes
code where the fanout 1 -> 0 switch is not applied uniformly across
the notes tree, but instead yields a notes tree like this:
...
bdeafb301e44b0e4db0f738a2d2a7beefdb70b70
bff2d39b4f7122bd4c5caee3de353a774d1e632a
d3/8ec8f851adf470131178085bfbaab4b12ad2a7
e0b173960431a3e692ae929736df3c9b73a11d5b
eb3c3aede523d729990ac25c62a93eb47c21e2e3
...
The bug occurs when we are writing out a notes tree with a newly
decreased fanout, and the notes tree contains unexpanded subtrees
that should be consolidated into the parent tree as a consequence of
the decreased fanout):
Subtrees that happen to sit at an _even_ level in the internal notes
16-tree structure (in other words: subtrees whose path - "d3" in the
example above - is unique in the first nibble - i.e. there are no
other note paths that start with "d") are _not_ unpacked as part of
the tree writeout. This error will repeat itself in subsequent note
trees until the subtree is forced to be unpacked. In t3305 this only
happens when the d38ec8f8 note is itself removed from the tree.
The error is not severe (no information is lost, and the notes code
is able to read/decode this tree and manipulate it correctly), but
this is nonetheless a bug in the current implementation that should
be fixed.
That said, fixing the off-by-one error is not without complications:
We must take into account that the load_subtree() call from
for_each_note_helper() (that is now done to correctly unpack the
subtree while we're writing out the notes tree) may end up inserting
unpacked non-notes into the linked list of non_note entries held by
the struct notes_tree. Since we are in the process of writing out the
notes tree, this linked list is currently in the process of being
traversed by write_each_non_note_until(). The unpacked non-notes are
necessarily inserted between the last non-note we wrote out, and the
next non-note to be written. Hence, we cannot simply hold the
next_non_note to write in struct write_each_note_data (as we would
then silently skip these newly inserted notes), but must instead
always follow the ->next pointer from the last non-note we wrote.
(This part was caught by an existing test in t3304.)
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Brian M. Carlson <sandals@crustytoothpaste.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In short, before this patch, this test script:
- creates many notes
- verifies that all notes in the notes tree has a fanout of 1
- removes most notes
- verifies that the notes in the notes tree now has a fanout of 0
The fanout verification only happened twice: after creating all the
notes, and after removing most of them.
This patch strengthens the test by checking the fanout after _each_
added/removed note: We assert that the switch from fanout 0 -> 1
happens exactly once while adding notes (and that the switch pervades
the entire notes tree). Likewise, we assert that the switch from
fanout 1 -> 0 happens exactly once while removing notes.
Additionally, we decrease the number of notes left after removal,
from 50 to 15 notes, in order to ensure that fanout 1 -> 0 transition
keeps happening regardless of external factors[1].
[1]: Currently (with the SHA1 hash function and the deterministic
object ids of the test environment) the fanout heuristic in the notes
code happens to switch from 0 -> 1 at 109 notes, and from 1 -> 0 at
59 notes. However, changing the hash function or other external
factors will vary these numbers, and the latter may - in theory - go
as low as 15. For more details, please see the discussion at
https://public-inbox.org/git/20200125230035.136348-4-sandals@crustytoothpaste.net/
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Brian M. Carlson <sandals@crustytoothpaste.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a similar treatment as in the previous patch to pass a 'struct
object_directory *' through the 'load_commit_graph_one_fd_st'
initializer, too.
This prevents a potential bug where a pointer comparison is made to a
NULL 'g->odb', which would cause the commit-graph machinery to think
that a pair of commit-graphs belonged to different alternates when in
fact they do not (i.e., in the case of no '--object-dir').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
