* maint-2.35:
Git 2.35.7
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.34:
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.33:
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.32:
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.31:
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.30:
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
In the previous commit, t5619 demonstrates an issue where two calls to
`get_repo_path()` could trick Git into using its local clone mechanism
in conjunction with a non-local transport.
That sequence is:
- the starting state is that the local path https:/example.com/foo is a
symlink that points to ../../../.git/modules/foo. So it's dangling.
- get_repo_path() sees that no such path exists (because it's
dangling), and thus we do not canonicalize it into an absolute path
- because we're using --separate-git-dir, we create .git/modules/foo.
Now our symlink is no longer dangling!
- we pass the url to transport_get(), which sees it as an https URL.
- we call get_repo_path() again, on the url. This second call was
introduced by f38aa83f9a (use local cloning if insteadOf makes a
local URL, 2014-07-17). The idea is that we want to pull the url
fresh from the remote.c API, because it will apply any aliases.
And of course now it sees that there is a local file, which is a
mismatch with the transport we already selected.
The issue in the above sequence is calling `transport_get()` before
deciding whether or not the repository is indeed local, and not passing
in an absolute path if it is local.
This is reminiscent of a similar bug report in [1], where it was
suggested to perform the `insteadOf` lookup earlier. Taking that
approach may not be as straightforward, since the intent is to store the
original URL in the config, but to actually fetch from the insteadOf
one, so conflating the two early on is a non-starter.
Note: we pass the path returned by `get_repo_path(remote->url[0])`,
which should be the same as `repo_name` (aside from any `insteadOf`
rewrites).
We *could* pass `absolute_pathdup()` of the same argument, which
86521acaca (Bring local clone's origin URL in line with that of a remote
clone, 2008-09-01) indicates may differ depending on the presence of
".git/" for a non-bare repo. That matters for forming relative submodule
paths, but doesn't matter for the second call, since we're just feeding
it to the transport code, which is fine either way.
[1]: https://lore.kernel.org/git/CAMoD=Bi41mB3QRn3JdZL-FGHs4w3C2jGpnJB-CqSndO7FMtfzA@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a repository with `--local`, Git relies on either making a
hardlink or copy to every file in the "objects" directory of the source
repository. This is done through the callpath `cmd_clone()` ->
`clone_local()` -> `copy_or_link_directory()`.
The way this optimization works is by enumerating every file and
directory recursively in the source repository's `$GIT_DIR/objects`
directory, and then either making a copy or hardlink of each file. The
only exception to this rule is when copying the "alternates" file, in
which case paths are rewritten to be absolute before writing a new
"alternates" file in the destination repo.
One quirk of this implementation is that it dereferences symlinks when
cloning. This behavior was most recently modified in 36596fd2df (clone:
better handle symlinked files at .git/objects/, 2019-07-10), which
attempted to support `--local` clones of repositories with symlinks in
their objects directory in a platform-independent way.
Unfortunately, this behavior of dereferencing symlinks (that is,
creating a hardlink or copy of the source's link target in the
destination repository) can be used as a component in attacking a
victim by inadvertently exposing the contents of file stored outside of
the repository.
Take, for example, a repository that stores a Dockerfile and is used to
build Docker images. When building an image, Docker copies the directory
contents into the VM, and then instructs the VM to execute the
Dockerfile at the root of the copied directory. This protects against
directory traversal attacks by copying symbolic links as-is without
dereferencing them.
That is, if a user has a symlink pointing at their private key material
(where the symlink is present in the same directory as the Dockerfile,
but the key itself is present outside of that directory), the key is
unreadable to a Docker image, since the link will appear broken from the
container's point of view.
This behavior enables an attack whereby a victim is convinced to clone a
repository containing an embedded submodule (with a URL like
"file:///proc/self/cwd/path/to/submodule") which has a symlink pointing
at a path containing sensitive information on the victim's machine. If a
user is tricked into doing this, the contents at the destination of
those symbolic links are exposed to the Docker image at runtime.
One approach to preventing this behavior is to recreate symlinks in the
destination repository. But this is problematic, since symlinking the
objects directory are not well-supported. (One potential problem is that
when sharing, e.g. a "pack" directory via symlinks, different writers
performing garbage collection may consider different sets of objects to
be reachable, enabling a situation whereby garbage collecting one
repository may remove reachable objects in another repository).
Instead, prohibit the local clone optimization when any symlinks are
present in the `$GIT_DIR/objects` directory of the source repository.
Users may clone the repository again by prepending the "file://" scheme
to their clone URL, or by adding the `--no-local` option to their `git
clone` invocation.
The directory iterator used by `copy_or_link_directory()` must no longer
dereference symlinks (i.e., it *must* call `lstat()` instead of `stat()`
in order to discover whether or not there are symlinks present). This has
no bearing on the overall behavior, since we will immediately `die()` on
encounter a symlink.
Note that t5604.33 suggests that we do support local clones with
symbolic links in the source repository's objects directory, but this
was likely unintentional, or at least did not take into consideration
the problem with sharing parts of the objects directory with symbolic
links at the time. Update this test to reflect which options are and
aren't supported.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git clone --origin X" leaked piece of memory that held value read
from the clone.defaultRemoteName configuration variable, which has
been plugged.
source: <xmqqlevl4ysk.fsf@gitster.g>
* jc/clone-remote-name-leak-fix:
clone: plug a miniscule leak
The path taken by "git multi-pack-index" command from the end user
was compared with path internally prepared by the tool withut first
normalizing, which lead to duplicated paths not being noticed,
which has been corrected.
source: <pull.1221.v2.git.1650911234.gitgitgadget@gmail.com>
* ds/midx-normalize-pathname-before-comparison:
cache: use const char * for get_object_directory()
multi-pack-index: use --object-dir real path
midx: use real paths in lookup_multi_pack_index()
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
source: <20220421044233.894255-1-alexhenrie24@gmail.com>
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
source: <xmqqh76mf7s4.fsf_-_@gitster.g>
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
source: <c36896a1-6247-123b-4fa3-b7eb24af1897@web.de>
* rs/format-patch-pathspec-fix:
2.36 format-patch regression fix
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
source: <2c988c7b-0efe-4222-4a43-8124fe1a9da6@web.de>
* rs/fast-export-pathspec-fix:
2.36 fast-export regression fix
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
source: <xmqqo80j87g0.fsf_-_@gitster.g>
* jc/show-pathspec-fix:
2.36 show regression fix
Regression fix for 2.36 where "git name-rev" started to sometimes
reference strings after they are freed.
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <340c8810-d912-7b18-d46e-a9d43f20216a@web.de>
* rs/name-rev-fix-free-after-use:
Revert "name-rev: release unused name strings"
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <xmqq7d7bsu2n.fsf@gitster.g>
* jc/diff-tree-stdin-fix:
2.36 gitk/diff-tree --stdin regression fix
"git submodule update" without pathspec should silently skip an
uninitialized submodule, but it started to become noisy by mistake.
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <pull.1258.v2.git.git.1650890741430.gitgitgadget@gmail.com>
* gc/submodule-update-part2:
submodule--helper: fix initialization of warn_if_uninitialized
The remote_name variable is first assigned a copy of the value of
the "clone.defaultremotename" configuration variable and then by the
value of the "--origin" command line option. The former is prepared
to see multiple instances of the configuration variable by freeing
the current value of the variable before a copy of the newly
discovered value gets assigned to it. The latter however blindly
assigned a copy of the new value to the variable, thereby leaking
the value read from the configuration variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git fast-export doesn't set no_free, so path limiting stopped working
after the first commit. Set the flag and add a basic test to make sure
only changes to the specified files are exported.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git format-patch only sets no_free when --output is given, causing it to
forget pathspecs after the first commit. Set no_free unconditionally
instead.
The existing test was unable to detect this breakage because it checks
stderr for the absence of a certain string, but format-patch writes to
stdout. Also the test was not checking the case of one commit modifying
multiple files and a pathspec limiting the diff. Replace it with a more
thorough one.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
e900d494 (diff: add an API for deferred freeing, 2021-02-11)
introduced a mechanism to delay freeing resources held in
diff_options struct that need to be kept as long as the struct will
be reused to compute diff. "git log -p" was taught to utilize the
mechanism but it was done with an incorrect assumption that the
underlying helper function, cmd_log_walk(), is called only once,
and it is OK to do the freeing at the end of it.
Alas, for "git show A B", the function is called once for each
commit given, so it is not OK to free the resources until we finish
calling it for all the commits given from the command line.
During 2.36 release cycle, we started clearing the <pathspec> as
part of this freeing, which made the bug a lot more visible.
Fix this breakage by tweaking how cmd_log_walk() frees the resources
at the end and using a variant of it that does not immediately free
the resources to show each commit object from the command line in
"git show".
Protect the fix with a few new tests.
Reported-by: Daniel Li <dan@danielyli.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .warn_if_uninitialized member was introduced by 48308681
(git submodule update: have a dedicated helper for cloning,
2016-02-29) to submodule_update_clone struct and initialized to
false. When c9911c93 (submodule--helper: teach update_data more
options, 2022-03-15) moved it to update_data struct, it started
to initialize it to true but this change was not explained in
its log message.
The member is set to true only when pathspec was given, and is
used when a submodule that matched the pathspec is found
uninitialized to give diagnostic message. "submodule update"
without pathspec is supposed to iterate over all submodules
(i.e. without pathspec limitation) and update only the
initialized submodules, and finding uninitialized submodules
during the iteration is a totally expected and normal thing that
should not be warned.
[jc: added tests]
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
The diff_free() call is to be used after we completely finished with
a diffopt structure. After "git diff A B" finishes producing
output, calling it before process exit is fine. But there are
commands that prepares diff_options struct once, compares two sets
of paths, releases resources that were used to do the comparison,
then reuses the same diff_option struct to go on to compare the next
two sets of paths, like "git log -p".
After "git log -p" finishes showing a single commit, calling it
before it goes on to the next commit is NOT fine. There is a
mechanism, the .no_free member in diff_options struct, to help "git
log" to avoid calling diff_free() after showing each commit and
instead call it just one. When the mechanism was introduced in
e900d494 (diff: add an API for deferred freeing, 2021-02-11),
however, we forgot to do the same to "diff-tree --stdin", which *is*
a moral equivalent to "git log".
During 2.36 release cycle, we started clearing the pathspec in
diff_free(), so programs like gitk that runs
git diff-tree --stdin -- <pathspec>
downstream of a pipe, processing one commit after another, started
showing irrelevant comparison outside the given <pathspec> from the
second commit. The same commit, by forgetting to teach the .no_free
mechanism, broke "diff-tree --stdin -I<regexp>" and nobody noticed
it for over a year, presumably because it is so seldom used an
option.
But <pathspec> is a different story. The breakage was very
prominently visible and was reported immediately after 2.36 was
released.
Fix this breakage by mimicking how "git log" utilizes the .no_free
member so that "diff-tree --stdin" behaves more similarly to "log".
Protect the fix with a few new tests.
Reported-by: Matthias Aßhauer <mha1993@live.de>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --object-dir argument to 'git multi-pack-index' allows a user to
specify an alternate to use instead of the local $GITDIR. This is used
by third-party tools like VFS for Git to maintain the pack-files in a
"shared object cache" used by multiple clones.
On Windows, the user can specify a path using a Windows-style file path
with backslashes such as "C:\Path\To\ObjectDir". This same path style is
used in the .git/objects/info/alternates file, so it already matches the
path of that alternate. However, find_odb() converts these paths to
real-paths for the comparison, which use forward slashes. As of the
previous change, lookup_multi_pack_index() uses real-paths, so it
correctly finds the target multi-pack-index when given these paths.
Some commands such as 'git multi-pack-index repack' call child processes
using the object_dir value, so it can be helpful to convert the path to
the real-path before sending it to those locations.
Add a callback to convert the real path immediately upon parsing the
argument. We need to be careful that we don't store the exact value out
of get_object_directory() and free it, or we could corrupt a later use
of the_repository->objects->odb->path.
We don't use get_object_directory() for the initial instantiation in
cmd_multi_pack_index() because we need 'git multi-pack-index -h' to work
without a Git repository.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 2d53975488.
3656f84278 (name-rev: prefer shorter names over following merges,
2021-12-04) broke the assumption of 2d53975488 (name-rev: release unused
name strings, 2020-02-04) that a better name for a child is a better
name for all of its ancestors as well, because it added a penalty for
generation > 0. This leads to strings being free(3)'d that are still
needed.
079f970971 (name-rev: sort tip names before applying, 2020-02-05)
already reduced the number of free(3) calls for the use case that
motivated the original patch (name-rev --all in the Chromium repository)
from ca. 44000 to 5, and 3656f84278 eliminated even those few. So this
revert won't affect name-rev's performance on that particular repo.
Reported-by: Thomas Hurst <tom@hur.st>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--current" is given to "git show-branch" running in the
"--reflog" mode, the code tries to reference a "reflog" message
that does not even exist. This is because the --current is not
prepared to work in that mode.
The reason "--current" exists is to support this request:
I list branches on the command line. These are the branchesI
care about and I use as anchoring points. I may or may not be on
one of these main branches. Please make sure I can view the
commits on the current branch with respect to what is in these
other branches.
And to serve that request, the code checks if the current branch is
among the ones listed on the command line, and adds it only if it is
not to the end of one array, which essentially lists the objects.
The reflog mode additionally uses another array to list reflog
messages, which the "--current" code does not add to. This leaves
one uninitialized slot at the end of the array of reflog messages,
and causes the program to show garbage or segfault.
Catch the unsupported (and meaningless) combination and exit with a
usage error.
There are other combinations of options that are incompatible but
have not been tested. Add test to cover them while adding coverage
for this new combination.
Reported-by: Gregory David <gregory.david@p1sec.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--keep-base rebases onto the merge base of the given upstream and the
current HEAD regardless of whether a branch is given. This is contrary
to the documentation and to the option's intended purpose. Instead,
rebase onto the merge base of the given upstream and the given branch.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
String in submodule--helper is not correctly formatting
placeholders. The string in git-send-email is partial.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The missing space at the end of the line makes the closing square
bracket sticking to the dash in the next line
Found during localisation v2.36.0 round 1
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
source: <cover.1648026472.git.dyroneteng@gmail.com>
* tl/ls-tree-oid-only:
ls-tree: `-l` should not imply recursive listing
In 9c4d58ff2c (ls-tree: split up "fast path" callbacks, 2022-03-23), a
refactoring of the various read_tree_at() callbacks caused us to
unconditionally recurse into directories if `-l` (long format) was
passed on the command line, regardless of whether or not we also pass
the `-r` (recursive) flag.
Fix this by making show_tree_long() return the value of `recurse`,
rather than always returning 1. This value is interpreted by
read_tree_at() to be a signal on whether or not to recurse.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list --porcelain" did not c-quote pathnames and lock
reasons with unsafe bytes correctly, which is worked around by
introducing NUL terminated output format with "-z".
* pw/worktree-list-with-z:
worktree: add -z option for list subcommand
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
"git fetch --refetch" learned to fetch everything without telling
the other side what we already have, which is useful when you
cannot trust what you have in the local object store.
* rc/fetch-refetch:
docs: mention --refetch fetch option
fetch: after refetch, encourage auto gc repacking
t5615-partial-clone: add test for fetch --refetch
fetch: add --refetch option
builtin/fetch-pack: add --refetch option
fetch-pack: add refetch
fetch-negotiator: add specific noop initializer
"git am" can read from the standard input when no mailbox is given
on the command line, but the end-user gets no indication when it
happens, making Git appear stuck.
* jc/mailsplit-warn-on-tty:
am/apply: warn if we end up reading patches from terminal
A handful of obvious clean-ups around a topic that is already in
'master'.
* gc/branch-recurse-submodules-fix:
branch.c: simplify advice-and-die sequence
branch: rework comments for future developers
branch: remove negative exit code
branch --set-upstream-to: be consistent when advising
branch: give submodule updating advice before exit
branch: support more tracking modes when recursing
Move more "git submodule update" to C.
* gc/submodule-update-part2:
submodule--helper: remove forward declaration
submodule: move core cmd_update() logic to C
submodule--helper: reduce logic in run_update_procedure()
submodule--helper: teach update_data more options
builtin/submodule--helper.c: rename option struct to "opt"
submodule update: use die_message()
submodule--helper: run update using child process struct
Code clean-up.
* ds/partial-bundle-more:
pack-objects: lazily set up "struct rev_info", don't leak
bundle: output hash information in 'verify'
bundle: move capabilities to end of 'verify'
pack-objects: parse --filter directly into revs.filter
pack-objects: move revs out of get_object_list()
list-objects-filter: remove CL_ARG__FILTER
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
* tl/ls-tree-oid-only:
ls-tree: split up "fast path" callbacks
ls-tree: detect and error on --name-only --name-status
ls-tree: support --object-only option for "git-ls-tree"
ls-tree: introduce "--format" option
cocci: allow padding with `strbuf_addf()`
ls-tree: introduce struct "show_tree_data"
ls-tree: slightly refactor `show_tree()`
ls-tree: fix "--name-only" and "--long" combined use bug
ls-tree: simplify nesting if/else logic in "show_tree()"
ls-tree: rename "retval" to "recurse" in "show_tree()"
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
ls-tree: use "enum object_type", not {blob,tree,commit}_type
ls-tree: add missing braces to "else" arms
ls-tree: remove commented-out code
ls-tree tests: add tests for --name-status
"git reflog" command now uses parse-options API to parse its
command line options.
* ab/reflog-parse-options:
reflog: fix 'show' subcommand's argv
reflog [show]: display sensible -h output
reflog: convert to parse_options() API
reflog exists: use parse_options() API
git reflog [expire|delete]: make -h output consistent with SYNOPSIS
reflog: move "usage" variables and use macros
reflog tests: add missing "git reflog exists" tests
reflog: refactor cmd_reflog() to "if" branches
reflog.c: indent argument lists
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
