* maint-2.35:
Git 2.35.7
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.34:
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.33:
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.32:
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.31:
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.30:
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
In the previous commit, t5619 demonstrates an issue where two calls to
`get_repo_path()` could trick Git into using its local clone mechanism
in conjunction with a non-local transport.
That sequence is:
- the starting state is that the local path https:/example.com/foo is a
symlink that points to ../../../.git/modules/foo. So it's dangling.
- get_repo_path() sees that no such path exists (because it's
dangling), and thus we do not canonicalize it into an absolute path
- because we're using --separate-git-dir, we create .git/modules/foo.
Now our symlink is no longer dangling!
- we pass the url to transport_get(), which sees it as an https URL.
- we call get_repo_path() again, on the url. This second call was
introduced by f38aa83f9a (use local cloning if insteadOf makes a
local URL, 2014-07-17). The idea is that we want to pull the url
fresh from the remote.c API, because it will apply any aliases.
And of course now it sees that there is a local file, which is a
mismatch with the transport we already selected.
The issue in the above sequence is calling `transport_get()` before
deciding whether or not the repository is indeed local, and not passing
in an absolute path if it is local.
This is reminiscent of a similar bug report in [1], where it was
suggested to perform the `insteadOf` lookup earlier. Taking that
approach may not be as straightforward, since the intent is to store the
original URL in the config, but to actually fetch from the insteadOf
one, so conflating the two early on is a non-starter.
Note: we pass the path returned by `get_repo_path(remote->url[0])`,
which should be the same as `repo_name` (aside from any `insteadOf`
rewrites).
We *could* pass `absolute_pathdup()` of the same argument, which
86521acaca (Bring local clone's origin URL in line with that of a remote
clone, 2008-09-01) indicates may differ depending on the presence of
".git/" for a non-bare repo. That matters for forming relative submodule
paths, but doesn't matter for the second call, since we're just feeding
it to the transport code, which is fine either way.
[1]: https://lore.kernel.org/git/CAMoD=Bi41mB3QRn3JdZL-FGHs4w3C2jGpnJB-CqSndO7FMtfzA@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a repository with `--local`, Git relies on either making a
hardlink or copy to every file in the "objects" directory of the source
repository. This is done through the callpath `cmd_clone()` ->
`clone_local()` -> `copy_or_link_directory()`.
The way this optimization works is by enumerating every file and
directory recursively in the source repository's `$GIT_DIR/objects`
directory, and then either making a copy or hardlink of each file. The
only exception to this rule is when copying the "alternates" file, in
which case paths are rewritten to be absolute before writing a new
"alternates" file in the destination repo.
One quirk of this implementation is that it dereferences symlinks when
cloning. This behavior was most recently modified in 36596fd2df (clone:
better handle symlinked files at .git/objects/, 2019-07-10), which
attempted to support `--local` clones of repositories with symlinks in
their objects directory in a platform-independent way.
Unfortunately, this behavior of dereferencing symlinks (that is,
creating a hardlink or copy of the source's link target in the
destination repository) can be used as a component in attacking a
victim by inadvertently exposing the contents of file stored outside of
the repository.
Take, for example, a repository that stores a Dockerfile and is used to
build Docker images. When building an image, Docker copies the directory
contents into the VM, and then instructs the VM to execute the
Dockerfile at the root of the copied directory. This protects against
directory traversal attacks by copying symbolic links as-is without
dereferencing them.
That is, if a user has a symlink pointing at their private key material
(where the symlink is present in the same directory as the Dockerfile,
but the key itself is present outside of that directory), the key is
unreadable to a Docker image, since the link will appear broken from the
container's point of view.
This behavior enables an attack whereby a victim is convinced to clone a
repository containing an embedded submodule (with a URL like
"file:///proc/self/cwd/path/to/submodule") which has a symlink pointing
at a path containing sensitive information on the victim's machine. If a
user is tricked into doing this, the contents at the destination of
those symbolic links are exposed to the Docker image at runtime.
One approach to preventing this behavior is to recreate symlinks in the
destination repository. But this is problematic, since symlinking the
objects directory are not well-supported. (One potential problem is that
when sharing, e.g. a "pack" directory via symlinks, different writers
performing garbage collection may consider different sets of objects to
be reachable, enabling a situation whereby garbage collecting one
repository may remove reachable objects in another repository).
Instead, prohibit the local clone optimization when any symlinks are
present in the `$GIT_DIR/objects` directory of the source repository.
Users may clone the repository again by prepending the "file://" scheme
to their clone URL, or by adding the `--no-local` option to their `git
clone` invocation.
The directory iterator used by `copy_or_link_directory()` must no longer
dereference symlinks (i.e., it *must* call `lstat()` instead of `stat()`
in order to discover whether or not there are symlinks present). This has
no bearing on the overall behavior, since we will immediately `die()` on
encounter a symlink.
Note that t5604.33 suggests that we do support local clones with
symbolic links in the source repository's objects directory, but this
was likely unintentional, or at least did not take into consideration
the problem with sharing parts of the objects directory with symbolic
links at the time. Update this test to reflect which options are and
aren't supported.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The auto-stashed local changes created by "git merge --autostash"
was mixed into a conflicted state left in the working tree, which
has been corrected.
* en/merge-unstash-only-on-clean-merge:
merge: only apply autostash when appropriate
Fixes to sparse index compatibility work for "reset" and "checkout"
commands.
source: <pull.1312.v3.git.1659985672.gitgitgadget@gmail.com>
* vd/sparse-reset-checkout-fixes:
unpack-trees: unpack new trees as sparse directories
cache.h: create 'index_name_pos_sparse()'
oneway_diff: handle removed sparse directories
checkout: fix nested sparse directory diff in sparse index
If a merge failed and we are leaving conflicts in the working directory
for the user to resolve, we should not attempt to apply any autostash.
Further, if we fail to apply the autostash (because either the merge
failed, or the user requested --no-commit), then we should instruct the
user how to apply it later.
Add a testcase verifying we have corrected this behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" miscounted the paths it updated, which has been
corrected.
source: <cover.1657799213.git.matheus.bernardino@usp.br>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
The resolve-undo information in the index was not protected against
GC, which has been corrected.
source: <xmqq35f7kzad.fsf@gitster.g>
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
Add the 'recursive' diff flag to the local changes reporting done by 'git
checkout' in 'show_local_changes()'. Without the flag enabled, unexpanded
sparse directories will not be recursed into to report the diff of each
file's contents, resulting in the reported local changes including
"modified" sparse directories.
The same issue was found and fixed for 'git status' in 2c521b0e49 (status:
fix nested sparse directory diff in sparse index, 2022-03-01)
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
source: <YsdyLS4UFzj0j/wB@coredump.intra.peff.net>
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
"git mktree --missing" lazily fetched objects that are missing from
the local object store, which was totally unnecessary for the purpose
of creating the tree object(s) from its input.
source: <748f39a9-65aa-2110-cf92-7ddf81b5f507@roku.com>
* ro/mktree-allow-missing-fix:
mktree: do not check type of remote objects
An earlier attempt to plug leaks placed a clean-up label to jump to
at a bogus place, which as been corrected.
source: <Ys0c0ePxPOqZ/5ck@coredump.intra.peff.net>
* jk/diff-files-cleanup-fix:
diff-files: move misplaced cleanup label
Since 4a4b4cda (builtin-remote: Make "remote -v" display push urls,
2009-06-13), the string_list that was initialized with 0 in its
strdup_string member is immediately made to strdup its key strings
by flipping the strdup_string member to true. When 183113a5
(string_list: Add STRING_LIST_INIT macro and make use of it.,
2010-07-04) has introduced STRING_LIST_INIT macros, it mechanically
replaced the initialization to STRING_LIST_INIT_NODUP.
Instead, just use the other initialization macro to make it strdup
the key from the beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When sorting the output of `git shortlog` by count, a list of authors in
alphabetical order is then sorted by contribution count. Obviously, the
idea is to maintain the alphabetical order for items with identical
contribution count.
At the moment, this job is performed by `qsort()`. As that function is
not guaranteed to implement a stable sort algorithm, this can lead to
inconsistent and/or surprising behavior: items with identical
contribution count could lose their alphabetical sub-order.
The `qsort()` in MS Visual C's runtime does _not_ implement a stable
sort algorithm, and under certain circumstances this even causes a test
failure in t4201.21 "shortlog can match multiple groups", where two
authors both are listed with 2 contributions, and are listed in inverse
alphabetical order.
Let's instead use the stable sort provided by `git_stable_qsort()` to
avoid this inconsistency.
This is a companion to 2049b8dc65 (diffcore_rename(): use a stable sort,
2019-09-30).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of `git checkout <pathspec>`, we get a message informing how
many entries were updated in the working tree. However, this number can
be inaccurate for two reasons:
1) Delayed entries currently get counted twice.
2) Failed entries are included in the count.
The first problem happens because the counter is first incremented
before inserting the entry in the delayed checkout queue, and once again
when finish_delayed_checkout() calls checkout_entry(). And the second
happens because the counter is incremented too early in
checkout_entry(), before the entry was in fact checked out. Fix that by
moving the count increment further down in the call stack and removing
the duplicate increment on delayed entries. Note that we have to keep
a per-entry reference for the counter (both on parallel checkout and
delayed checkout) because not all entries are always accumulated at the
same counter. See checkout_worktree(), at builtin/checkout.c for an
example.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0139c58ab9 (revisions API users: add "goto cleanup" for
release_revisions(), 2022-04-13) converted an early return in
cmd_diff_files() into a goto. But it put the cleanup label too early: if
read_cache_preload() returns an error, we'll set result to "-1", but
then jump to calling run_diff_files(), overwriting our result.
We should jump past the call to run_diff_files(). Likewise, we should go
past diff_result_code(), which is expecting to see a code from an actual
diff, not a negative error code.
In practice, I suspect this bug cannot actually be triggered, because
read_cache_preload() does not seem to ever return an error. Its return
value (eventually) comes from do_read_index(), which gives the number of
cache entries found, and calls die() on error. Still, it makes sense to
fix the inadvertent change from 0139c58ab9 first, and we can look into
the overall error handling of read_cache() separately (which is present
in many other callsites).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we found an invalid object recorded in the resolve-undo data,
we would have ended up dereferencing NULL while fsck. Reporting the
problem and going on to the next object is the right thing to do
here.
Noticed by SZEDER Gábor.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to 4f37d45706 (clone: respect remote unborn HEAD, 2021-02-05),
creation of the local HEAD was always done in update_head(). That commit
added code to handle an unborn head in an empty repository, and just did
all symref creation and config setup there.
This makes the code flow a little bit confusing, especially as new
corner cases have been covered (like the previous commit to match our
default branch name to a non-HEAD remote branch).
Let's move the creation of the unborn symref into update_head(). This
matches the other HEAD-creation cases, and now the logic is consistently
separated: the main cmd_clone() function only examines the situation and
sets variables based on what it finds, and update_head() actually
performs the update.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually clone tries to use the same local HEAD as the remote (unless the
user has given --branch explicitly). Even if the remote HEAD is detached
or unborn, we can detect those situations with modern versions of Git.
If the remote is too old to support the "unborn" extension (or it has
been disabled via config), then we can't know the name of the remote's
unborn HEAD, and we fall back whatever the local default branch name is
configured to be.
But that leads to one weird corner case. It's rare because it needs a
number of factors:
- the remote has an unborn HEAD
- the remote is too old to support "unborn", or has disabled it
- the remote has another branch "foo"
- the local default branch name is "foo"
In that case you end up with a local clone on an unborn "foo" branch,
disconnected completely from the remote's "foo". This is rare in
practice, but the result is quite confusing.
When choosing "foo", we can double check whether the remote has such a
name, and if so, start our local "foo" at the same spot, rather than
making it unborn.
Note that this causes a test failure in t5605, which is cloning from a
bundle that doesn't contain HEAD (so it behaves like a remote that
doesn't support "unborn"), but has a single "main" branch. That test
expects that we end up in the weird "unborn main" case, where we don't
actually check out the remote branch of the same name. Even though we
have to update the test, this seems like an argument in favor of this
patch: checking out main is what I'd expect from such a bundle.
So this patch updates the test for the new behavior and adds an adjacent
one that checks what the original was going for: if there's no HEAD and
the bundle _doesn't_ have a branch that matches our local default name,
then we end up with nothing checked out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless "--branch" was given, clone generally tries to match the local
HEAD to the remote one. For most repositories, this is easy: the remote
tells us which branch HEAD was pointing to, and we call our local
checkout() function on that branch.
When cloning an empty repository, it's a little more tricky: we have
special code that checks the transport's "unborn" extension, or falls back
to our local idea of what the default branch should be. In either case,
we point the new HEAD to that, and set up the branch.* config.
But that leaves one case unhandled: when the remote repository _isn't_
empty, but its HEAD is unborn. The checkout() function is smart enough
to realize we didn't fetch the remote HEAD and it bails with a warning.
But we'll have ignored any information the remote gave us via the unborn
extension. This leads to nonsense outcomes:
- If the remote has its HEAD pointing to an unborn "foo" and contains
another branch "bar", cloning will get branch "bar" but leave the
local HEAD pointing at "master" (or whatever our local default is),
which is useless. The project does not use "master" as a branch.
- Worse, if the other branch "bar" is instead called "master" (but
again, the remote HEAD is not pointing to it), then we end up with a
local unborn branch "master", which is not connected to the remote
"master" (it shares no history, and there's no branch.* config).
Instead, we should try to use the remote's HEAD, even if its unborn, to
be consistent with the other cases.
The reason this case was missed is that cmd_clone() handles empty and
non-empty repositories on two different sides of a conditional:
if (we have any refs) {
fetch refs;
check for --branch;
otherwise, try to point our head at remote head;
otherwise, our head is NULL;
} else {
check for --branch;
otherwise, try to use "unborn" extension;
otherwise, fall back to our default name name;
}
So the smallest change would be to repeat the "unborn" logic at the end
of the first block. But we can note some other overlaps and
inconsistencies:
- both sides have to handle --branch (though note that it's always an
error for the empty repo case, since an empty repo by definition
does not have a matching branch)
- the fall back to the default name is much more explicit in the
empty-repo case. The non-empty case eventually ends up bailing
from checkout() with a warning, which produces a similar result, but
fails to set up the branch config we do in the empty case.
So let's pull the HEAD setup out of this conditional entirely. This
de-duplicates some of the code and the result is easy to follow, because
helper functions like find_ref_by_name() do the right thing even in the
empty-repo case (i.e., by returning NULL).
There are two subtleties:
- for a remote with a detached HEAD, it will advertise an oid for HEAD
(which we store in our "remote_head" variable), but we won't find a
matching refname (so our "remote_head_points_at" is NULL). In this
case we make a local detached HEAD to match. Right now this happens
implicitly by reaching update_head() with a non-NULL remote_head
(since we skip all of the unborn-fallback). We'll now need to
account for it explicitly before doing the fallback.
- for an empty repo, we issue a warning to the user that they've
cloned an empty repo. The text of that warning doesn't make sense
for a non-empty repo with an unborn HEAD, so we'll have to
differentiate the two cases there. We could just use different text,
but instead let's allow the code to continue down to checkout(),
which will issue an appropriate warning, like:
remote HEAD refers to nonexistent ref, unable to checkout
Continuing down to checkout() will make it easier to do more fixes
on top (see below).
Note that this patch fixes the case where the other side reports an
unborn head to us using the protocol extension. It _doesn't_ fix the
case where the other side doesn't tell us, we locally guess "master",
and the other side happens to have a "master" which its HEAD doesn't
point. But it doesn't make anything worse there, and it should actually
make it easier to fix that problem on top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to put a "\n" in calls to warning(), since it adds one
itself (and the user sees an extra blank line). Drop it, and while we're
here, drop the full-stop from the message, which goes against our
guidelines.
This bug dates all the way back to 8434c2f1af (Build in clone,
2008-04-27), but presumably nobody noticed because it's hard to trigger:
you have to clone a repository whose HEAD is unborn, but which is not
otherwise empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 31c8221a (mktree: validate entry type in input, 2009-05-14), we
called the sha1_object_info() API to obtain the type information, but
allowed the call to silently fail when the object was missing locally,
so that we can sanity-check the types opportunistically when the
object did exist.
The implementation is understandable because back then there was no
lazy/on-demand downloading of individual objects from the promisor
remotes that causes a long delay and materializes the object, hence
defeating the point of using "--missing". The design is hurting us
now.
We could bypass the opportunistic type/mode consistency check
altogether when "--missing" is given, but instead, use the
oid_object_info_extended() API and tell it that we are only interested
in objects that locally exist and are immediately available by passing
OBJECT_INFO_SKIP_FETCH_OBJECT bit to it. That way, we will still
retain the cheap and opportunistic sanity check for local objects.
Signed-off-by: Richard Oliver <roliver@roku.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an option rather than command. Make the message convey this
similar to the other messages in the file.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Lowercase in manpage should use camelCase:
* Documentation/config/http.txt: http.pinnedpubkey
Lowercase in translable strings should use camelCase:
* builtin/fast-import.c: pack.indexversion
* builtin/gc.c: gc.logexpiry
* builtin/index-pack.c: pack.indexversion
* builtin/pack-objects.c: pack.indexversion
* builtin/repack.c: pack.writebitmaps
* commit.c: i18n.commitencoding
* gpg-interface.c: user.signingkey
* http.c: http.postbuffer
* submodule-config.c: submodule.fetchjobs
Mismatched camelCases, choose the former:
* Documentation/config/transfer.txt: transfer.credentialsInUrl
remote.c: transfer.credentialsInURL
[^1]: https://github.com/git-l10n/git-po-helper
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c51f8f94e5 (submodule--helper: run update procedures from C,
2021-08-24), we added code that first obtains the default remote, and
then adds that to a `strvec`.
However, we never released the default remote's memory.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various error messages that talk about the removal of
"--preserve-merges" in "rebase" have been strengthened, and "rebase
--abort" learned to get out of a state that was left by an earlier
use of the option.
* po/rebase-preserve-merges:
rebase: translate a die(preserve-merges) message
rebase: note `preserve` merges may be a pull config option
rebase: help users when dying with `preserve-merges`
rebase.c: state preserve-merges has been removed
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
"git show-ref --heads" (and "--tags") still iterated over all the
refs only to discard refs outside the specified area, which has
been corrected.
* tb/show-ref-optim:
builtin/show-ref.c: avoid over-iterating with --heads, --tags
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
The resolve-undo extension was added to the index in cfc5789a
(resolve-undo: record resolved conflicts in a new index extension
section, 2009-12-25). This extension records the blob object names
and their modes of conflicted paths when the path gets resolved
(e.g. with "git add"), to allow "undoing" the resolution with
"checkout -m path". These blob objects should be guarded from
garbage-collection while we have the resolve-undo information in the
index (otherwise unresolve operation may try to use a blob object
that has already been pruned away).
But the code called from mark_reachable_objects() for the index
forgets to do so. Teach add_index_objects_to_pending() helper to
also add objects referred to by the resolve-undo extension.
Also make matching changes to "fsck", which has code that is fairly
similar to the reachability stuff, but have parallel implementations
for all these stuff, which may (or may not) someday want to be unified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --origin X" leaked piece of memory that held value read
from the clone.defaultRemoteName configuration variable, which has
been plugged.
source: <xmqqlevl4ysk.fsf@gitster.g>
* jc/clone-remote-name-leak-fix:
clone: plug a miniscule leak
