Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts, reinstated && chain]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jes: adusted test number to avoid conflicts, fixed non-portable use of
the 'export' statement]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When building the `doc` with `asciidoctor`, `asciidoctor` complains about
a nested code block in a callout list. This is a really dirty solution to
restore the callout list to function properly. There is a minimal visual
sideeffect; the *immitated* codeblock has no overall greyish background.
Instead the individual lines have it.
Note: When building this patch with `asciidoc` the background is totally
gone but the font is still monospaced.
Signed-off-by: nalla <nalla@hamal.uberspace.de>
The `user-manual.txt` ist designed as a `book` but the `Makefile` wants to
build it as an `article`. This seems to be a problem when building the
documentation with `asciidoctor`. Furthermore the parts *Git Glossary*
and *Apendix B* had no subsections which is not allowed when building with
`asciidoctor`. So lets add a *dummy* section.
Signed-off-by: nalla <nalla@hamal.uberspace.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow lstat
emulation (git calls lstat once for each file in the index). Windows
operating system APIs seem to be much better at scanning the status
of entire directories than checking single files.
Add an lstat implementation that uses a cache for lstat data. Cache misses
read the entire parent directory and add it to the cache. Subsequent lstat
calls for the same directory are served directly from the cache.
Also implement opendir / readdir / closedir so that they create and use
directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX dirent API on Windows via FindFirstFile/FindNextFile is
pretty staightforward, however, most of the information provided in the
WIN32_FIND_DATA structure is thrown away in the process. A more
sophisticated implementation may cache this data, e.g. for later reuse in
calls to lstat.
Make the dirent implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to readdir/closedir that match
the opendir implementation (i.e. similar to vtable pointers in OOP).
Define readdir/closedir so that they call the function pointers in the DIR
structure. This allows to choose the opendir implementation on a
call-by-call basis.
Move the fixed sized dirent.d_name buffer to the dirent-specific DIR
structure, as d_name may be implementation specific (e.g. a caching
implementation may just set d_name to point into the cache instead of
copying the entire file name string).
Signed-off-by: Karsten Blees <blees@dcon.de>
With msysGit the .git directory is supposed to be hidden, unless it is
a bare git repository. Test this.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
At least for cross-platform projects, it makes sense to hide the
files starting with a dot, as this is the behavior on Unix/MacOSX.
However, at least Eclipse has problems interpreting the hidden flag
correctly, so the default is to hide only the .git/ directory.
The config setting core.hideDotFiles therefore supports not only
'true' and 'false', but also 'dotGitOnly'.
[jes: clarified the commit message, made git init respect the setting
by marking the .git/ directory only after reading the config, and added
documentation, and rebased on top of current junio/next]
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Many a test requires either POSIXPERM (to change the executable bit) or
SYMLINKS, and neither are available on Windows.
This lets t9100-git-svn-basic.sh pass in Git for Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When running "git blame $path" with unnormalized data in the index
for the path, the data in the working tree was blamed, even though
"git add" would not have changed what is already in the index, due
to "safe crlf" that disables the line-end conversion. It has been
corrected.
* tb/blame-force-read-cache-to-workaround-safe-crlf:
correct blame for files commited with CRLF
"git send-pack --all <there>" was broken when its command line
option parsing was written in the 2.6 timeframe.
* sk/send-pack-all-fix:
git-send-pack: fix --all option when used with directory
"git diff -M" used to work better when two originally identical
files A and B got renamed to X/A and X/B by pairing A to X/A and B
to X/B, but this was broken in the 2.0 timeframe.
* sg/diff-multiple-identical-renames:
diffcore: fix iteration order of identical files during rename detection
Build updates for MSVC.
* ss/msvc:
MSVC: use shipped headers instead of fallback definitions
MSVC: vsnprintf in Visual Studio 2015 doesn't need SNPRINTF_SIZE_CORR any more
l10n-2.8.0-rnd3-fr
* tag 'l10n-2.8.0-rnd3-fr' of git://github.com/git-l10n/git-po:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
* 'fr_v2.8.0_r3' of git://github.com/jnavila/git:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
"git merge FETCH_HEAD" dereferenced NULL pointer when merging
nothing into an unborn history (which is arguably unusual usage,
which perhaps was the reason why nobody noticed it).
* jv/merge-nothing-into-void:
merge: fix NULL pointer dereference when merging nothing into void
When "git merge --squash" stopped due to conflict, the concluding
"git commit" failed to read in the SQUASH_MSG that shows the log
messages from all the squashed commits.
* ss/commit-squash-msg:
commit: do not lose SQUASH_MSG contents
"git send-email" had trouble parsing alias file in mailrc format
when lines in it had trailing whitespaces on them.
* jk/send-email-rtrim-mailrc-alias:
send-email: ignore trailing whitespace in mailrc alias file
"git mergetool" did not work well with conflicts that both sides
deleted.
* da/mergetool-delete-delete-conflict:
mergetool: honor tempfile configuration when resolving delete conflicts
mergetool: support delete/delete conflicts
The startup_info data, which records if we are working inside a
repository (among other things), are now uniformly available to Git
subcommand implementations, and Git avoids attempting to touch
references when we are not in a repository.
* jk/startup-info:
use setup_git_directory() in test-* programs
grep: turn off gitlink detection for --no-index
mailmap: do not resolve blobs in a non-repository
remote: don't resolve HEAD in non-repository
setup: set startup_info->have_repository more reliably
setup: make startup_info available everywhere
strbuf_getwholeline() did not NUL-terminate the buffer on certain
corner cases in its error codepath.
* jk/getwholeline-getdelim-empty:
strbuf_getwholeline: NUL-terminate getdelim buffer on error
A small memory leak in an error codepath has been plugged in xdiff
code.
* rj/xdiff-prepare-plug-leak-on-error-codepath:
xdiff/xprepare: fix a memory leak
xdiff/xprepare: use the XDF_DIFF_ALG() macro to access flag bits
Fetching of history by naming a commit object name directly didn't
work across remote-curl transport.
* gf/fetch-pack-direct-object-fetch:
fetch-pack: update the documentation for "<refs>..." arguments
fetch-pack: fix object_id of exact sha1
The "--local-env-vars" and "--resolve-git-dir" options of "git
rev-parse" failed to work outside a repository when the command's
option parsing was rewritten in 1.8.5 era.
* jk/rev-parse-local-env-vars:
rev-parse: let some options run outside repository
t1515: add tests for rev-parse out-of-repo helpers
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
The tests that involve running httpd leaked the system-wide
configuration in /etc/gitconfig to the tested environment.
* jk/test-httpd-config-nosystem:
t/lib-httpd: pass through GIT_CONFIG_NOSYSTEM env
