This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch addresses the bug where Git for Windows 2.x' Git GUI
failed to generate a working shortcut via Repository>Create Desktop
Shortcut.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Move the description for the additional Git for Windows configuration file
into the right place, so that the following descriptions of the read priority
also covers this file correctly.
Also make it clear, what file `git config --system` selects.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
On Windows, there is no (single) `/etc/` directory. To address that, in
conjunction with the libgit2 project, Git for Windows introduced yet
another level of system-wide config files, located in C:\ProgramData
(and the equivalent on Windows XP).
Let's spell this out in the documentation.
This closes https://github.com/git-for-windows/git/pull/470 (because
there was no reaction in three months in that Pull Request).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
On XP, there is no %PROGRAMDATA%, therefore we need to use
"%ALLUSERSPROFILE%\Application Data\Git\config" in those setups.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
`GetLongPathName()` function may fail when it is unable to query
the parent directory of a path component to determine the long name
for that component. It happens, because of it uses `FindFirstFile()`
function for each next short part of path. The `FindFirstFile()`
requires `List Directory` and `Synchronize` desired access for a calling
process.
In case of lacking such permission for some part of path,
the `GetLongPathName()` returns 0 as result and `GetLastError()`
returns ERROR_ACCESS_DENIED.
`GetFinalPathNameByHandle()` function can help in such cases, because
it requires `Read Attributes` and `Synchronize` desired access to the
target path only.
The `GetFinalPathNameByHandle()` function was introduced on
`Windows Server 2008/Windows Vista`. So we need to load it dynamically.
`CreateFile()` parameters:
`lpFileName` = path to the current directory
`dwDesiredAccess` = 0 (it means `Read Attributes` and `Synchronize`)
`dwShareMode` = FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE
(it prevents `Sharing Violation`)
`lpSecurityAttributes` = NULL (default security attributes)
`dwCreationDisposition` = OPEN_EXISTING
(required to obtain a directory handle)
`dwFlagsAndAttributes` = FILE_FLAG_BACKUP_SEMANTICS
(required to obtain a directory handle)
`hTemplateFile` = NULL (when opening an existing file or directory,
`CreateFile` ignores this parameter)
The string that is returned by `GetFinalPathNameByHandle()` function
uses the \\?\ syntax. To skip the prefix and convert backslashes
to slashes, the `normalize_ntpath()` mingw function will be used.
Note: `GetFinalPathNameByHandle()` function returns a final path.
It is the path that is returned when a path is fully resolved.
For example, for a symbolic link named "C:\tmp\mydir" that points to
"D:\yourdir", the final path would be "D:\yourdir".
Signed-off-by: Anton Serbulov <aserbulov@plesk.com>
When switching the current working directory, say, in PowerShell, it is
quite possible to use a different capitalization than the one that is
recorded on disk. While doing the same in `cmd.exe` adjusts the
capitalization magically, that does not happen in PowerShell so that
`getcwd()` returns the current directory in a different way than is
recorded on disk.
Typically this creates no problems except when you call
git log .
in a subdirectory called, say, "GIT/" but you switched to "Git/" and
your `getcwd()` reports the latter, then Git won't understand that you
wanted to see the history as per the `GIT/` subdirectory but it thinks you
wanted to see the history of some directory that may have existed in the
past (but actually never did).
So let's be extra careful to adjust the capitalization of the current
directory before working with it.
Reported by a few PowerShell power users ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We no longer use any of MSVCRT's stat-functions, so there's no need to
stick to a CRT-compatible 'struct stat' either.
Define and use our own POSIX-2013-compatible 'struct stat' with nanosecond-
precision file times.
Note: Due to performance issues when using git variants with different file
time resolutions, this patch does *not* yet enable nanosecond precision in
the Makefile (use 'make USE_NSEC=1').
Signed-off-by: Karsten Blees <blees@dcon.de>
The contract for the stat() and lstat() function is:
> stat(): stats the file pointed to by path and fills in buf.
> lstat(): is identical to stat(), except that if path is a symbolic link,
> then the link itself is stat-ed, not the file that it refers to.
stat() should always return the statistics of the file or directory a
symbolic link is pointing to. The lstat() function is used to get the
stats for the symlink. Hence the check should not be there.
Signed-off-by: Loris Chiocca <loris@chiocca.ch>
fstat() is the only stat-related CRT function for which we don't have a
full replacement yet (and thus the only reason to stick with MSVCRT's
'struct stat' definition).
Fully implement fstat(), in preparation of implementing a POSIX 2013
compatible 'struct stat' with nanosecond-precision file times.
Signed-off-by: Karsten Blees <blees@dcon.de>
This is needed so that `_wchdir()` can be used with drive root
directories, e.g. C:\ (`_wchdir("C:")` fails to switch the directory
to the root directory).
This fixes https://github.com/msysgit/git/issues/359 (in Git for Windows
2.x only, though).
Likewise, `readlink()`'s semantics require a trailing slash for symbolic
links pointing to directories. Otherwise all checked out symbolic links
pointing to directories would be marked as modified even directly after a
fresh clone.
This fixes https://github.com/git-for-windows/git/issues/210
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Symlinks on Windows have a flag that indicates whether the target is a file
or a directory. Symlinks of wrong type simply don't work. This even affects
core Win32 APIs (e.g. DeleteFile() refuses to delete directory symlinks).
However, CreateFile() with FILE_FLAG_BACKUP_SEMANTICS doesn't seem to care.
Check the target type by first creating a tentative file symlink, opening
it, and checking the type of the resulting handle. If it is a directory,
recreate the symlink with the directory flag set.
It is possible to create symlinks before the target exists (or in case of
symlinks to symlinks: before the target type is known). If this happens,
create a tentative file symlink and postpone the directory decision: keep
a list of phantom symlinks to be processed whenever a new directory is
created in mingw_mkdir().
Limitations: This algorithm may fail if a link target changes from file to
directory or vice versa, or if the target directory is created in another
process.
Signed-off-by: Karsten Blees <blees@dcon.de>
Implement symlink() that always creates file symlinks. Fails with ENOSYS
if symlinks are disabled or unsupported.
Note: CreateSymbolicLinkW() was introduced with symlink support in Windows
Vista. For compatibility with Windows XP, we need to load it dynamically
and fail gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
Implement readlink() by reading NTFS reparse points. Works for symlinks
and directory junctions. If symlinks are disabled, fail with ENOSYS.
Signed-off-by: Karsten Blees <blees@dcon.de>
If symlinks are enabled, resolve all symlinks when changing directories,
as required by POSIX.
Note: Git's real_path() function bases its link resolution algorithm on
this property of chdir(). Unfortunately, the current directory on Windows
is limited to only MAX_PATH (260) characters. Therefore using symlinks and
long paths in combination may be problematic.
Note: GetFinalPathNameByHandleW() was introduced with symlink support in
Windows Vista. Thus, for compatibility with Windows XP, we need to load it
dynamically and behave gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
MSVCRT's _wrename() cannot rename symlinks over existing files: it returns
success without doing anything. Newer MSVCR*.dll versions probably do not
have this problem: according to CRT sources, they just call MoveFileEx()
with the MOVEFILE_COPY_ALLOWED flag.
Get rid of _wrename() and call MoveFileEx() with proper error handling.
Signed-off-by: Karsten Blees <blees@dcon.de>
_wunlink() / DeleteFileW() refuses to delete symlinks to directories. If
_wunlink() fails with ERROR_ACCESS_DENIED, try _wrmdir() as well.
Signed-off-by: Karsten Blees <blees@dcon.de>
Symlinks on Windows don't work the same way as on Unix systems. E.g. there
are different types of symlinks for directories and files, creating
symlinks requires administrative privileges etc.
By default, disable symlink support on Windows. I.e. users explicitly have
to enable it with 'git config [--system|--global] core.symlinks true'.
The test suite ignores system / global config files. Allow testing *with*
symlink support by checking if native symlinks are enabled in MSys2 (via
'MSYS=winsymlinks:nativestrict').
Reminder: This would need to be changed if / when we find a way to run the
test suite in a non-MSys-based shell (e.g. dash).
Signed-off-by: Karsten Blees <blees@dcon.de>
The retry pattern is duplicated in three places. It also seems to be too
hard to use: mingw_unlink() and mingw_rmdir() duplicate the code to retry,
and both of them do so incompletely. They also do not restore errno if the
user answers 'no'.
Introduce a retry_ask_yes_no() helper function that handles retry with
small delay, asking the user, and restoring errno.
mingw_unlink: include _wchmod in the retry loop (which may fail if the
file is locked exclusively).
mingw_rmdir: include special error handling in the retry loop.
Signed-off-by: Karsten Blees <blees@dcon.de>
Git typically doesn't trust the stat.st_size member of symlinks (e.g. see
strbuf_readlink()). However, some functions take shortcuts if st_size is 0
(e.g. diff_populate_filespec()).
In mingw_lstat() and fscache_lstat(), make sure to return an adequate size.
The extra overhead of opening and reading the reparse point to calculate
the exact size is not necessary, as git doesn't rely on the value anyway.
Signed-off-by: Karsten Blees <blees@dcon.de>
Move S_IFLNK detection to file_attr_to_st_mode() and reuse it in fscache.
Implement DT_LNK detection in dirent.c and the fscache readdir version.
Signed-off-by: Karsten Blees <blees@dcon.de>
When obtaining lstat information for reparse points, we need to call
FindFirstFile() in addition to GetFileInformationEx() to obtain the type
of the reparse point (symlink, mount point etc.). However, currently there
is no error handling whatsoever if FindFirstFile() fails.
Call FindFirstFile() before modifying the stat *buf output parameter and
error out if the call fails.
Note: The FindFirstFile() return value includes all the data that we get
from GetFileAttributesEx(), so we could replace GetFileAttributesEx() with
FindFirstFile(). We don't do that because GetFileAttributesEx() is about
twice as fast for single files. I.e. we only pay the extra cost of calling
FindFirstFile() in the rare case that we encounter a reparse point.
Note: The indentation of the remaining reparse point code will be fixed in
the next patch.
Signed-off-by: Karsten Blees <blees@dcon.de>
With the new mingw_stat() implementation, do_lstat() is only called from
mingw_lstat() (with follow == 0). Remove the extra function and the old
mingw_stat()-specific (follow == 1) logic.
Signed-off-by: Karsten Blees <blees@dcon.de>
With respect to symlinks, the current stat() implementation is almost the
same as lstat(): except for the file type (st_mode & S_IFMT), it returns
information about the link rather than the target.
Implement stat by opening the file with as little permissions as possible
and calling GetFileInformationByHandle on it. This way, all link resoltion
is handled by the Windows file system layer.
If symlinks are disabled, use lstat() as before, but fail with ELOOP if a
symlink would have to be resolved.
Signed-off-by: Karsten Blees <blees@dcon.de>
GetFileAttributes cannot handle paths with trailing dir separator. The
current [l]stat implementation calls GetFileAttributes twice if the path
has trailing slashes (first with the original path passed to [l]stat, and
and a second time with a path copy with trailing '/' removed).
With Unicode conversion, we get the length of the path for free and also
have a (wide char) buffer that can be modified.
Remove trailing directory separators before calling the Win32 API.
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() refuses to read link targets that exceed PATH_MAX (even
if a sufficient size was specified by the caller).
As some platforms support longer paths, remove this restriction (similar
to strbuf_getcwd()).
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() calls readlink() twice if the hint argument specifies the
exact size of the link target (e.g. by passing stat.st_size as returned by
lstat()). This is necessary because 'readlink(..., hint) == hint' could
mean that the buffer was too small.
Use hint + 1 as buffer size to prevent this.
Signed-off-by: Karsten Blees <blees@dcon.de>
We introduced helper macros to simplify loading functions dynamically.
Might just as well use them.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When a user is registered in a Windows domain, it is really easy to
obtain the email address. So let's do that.
Suggested by Lutz Roeder.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We introduced helper macros to simplify loading functions dynamically.
Might just as well use them.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since commit 0c499ea60f the send-pack builtin uses the side-band-64k
capability if advertised by the server.
Unfortunately this breaks pushing over the dump git protocol if used
over a network connection.
The detailed reasons for this breakage are (by courtesy of Jeff Preshing,
quoted from ttps://groups.google.com/d/msg/msysgit/at8D7J-h7mw/eaLujILGUWoJ):
----------------------------------------------------------------------------
MinGW wraps Windows sockets in CRT file descriptors in order to mimic the
functionality of POSIX sockets. This causes msvcrt.dll to treat sockets as
Installable File System (IFS) handles, calling ReadFile, WriteFile,
DuplicateHandle and CloseHandle on them. This approach works well in simple
cases on recent versions of Windows, but does not support all usage patterns.
In particular, using this approach, any attempt to read & write concurrently
on the same socket (from one or more processes) will deadlock in a scenario
where the read waits for a response from the server which is only invoked after
the write. This is what send_pack currently attempts to do in the use_sideband
codepath.
----------------------------------------------------------------------------
The new config option "sendpack.sideband" allows to override the side-band-64k
capability of the server, and thus makes the dump git protocol work.
Other transportation methods like ssh and http/https still benefit from
the sideband channel, therefore the default value of "sendpack.sideband"
is still true.
Signed-off-by: Thomas Braun <thomas.braun@byte-physics.de>
