MingwRT listens to _CRT_glob to decide if __getmainargs should
perform globbing, with the default being that it should.
Unfortunately, __getmainargs globbing is sub-par; for instance
patterns like "*.c" will only match c-sources in the current
directory.
Disable __getmainargs' command line wildcard expansion, so these
patterns will be left untouched, and handled by Git's superior
built-in globbing instead.
MSVC defaults to no globbing, so we don't need to do anything
in that case.
This fixes t5505 and t7810.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
The code in the MinGW main macro is getting more and more complex, move to
a separate initialization function for readabiliy and extensibility.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Improve the dirent implementation by removing the relics that were once
necessary to plug into the now unused MinGW runtime, in preparation for
Unicode file name support.
Move FindFirstFile to opendir, and FindClose to closedir, with the
following implications:
- DIR.dd_name is no longer needed
- chdir(one); opendir(relative); chdir(two); readdir() works as expected
(i.e. lists one/relative instead of two/relative)
- DIR.dd_handle is a valid handle for the entire lifetime of the DIR struct
- thus, all checks for dd_handle == INVALID_HANDLE_VALUE and dd_handle == 0
have been removed
- the special case that the directory has been fully read (which was
previously explicitly tracked with dd_handle == INVALID_HANDLE_VALUE &&
dd_stat != 0) is now handled implicitly by the FindNextFile error
handling code (if a client continues to call readdir after receiving
NULL, FindNextFile will continue to fail with ERROR_NO_MORE_FILES, to
the same effect)
- extracting dirent data from WIN32_FIND_DATA is needed in two places, so
moved to its own method
- GetFileAttributes is no longer needed. The same information can be
obtained from the FindFirstFile error code, which is ERROR_DIRECTORY if
the name is NOT a directory (-> ENOTDIR), otherwise we can use
err_win_to_posix (e.g. ERROR_PATH_NOT_FOUND -> ENOENT). The
ERROR_DIRECTORY case could be fixed in err_win_to_posix, but this
probably breaks other functionality.
Removes the ERROR_NO_MORE_FILES check after FindFirstFile (this was
fortunately a NOOP (searching for '*' always finds '.' and '..'),
otherwise the subsequent code would have copied data from an uninitialized
buffer).
Changes malloc to git support function xmalloc, so opendir will die() if
out of memory, rather than failing with ENOMEM and letting git work on
incomplete directory listings (error handling in dir.c is quite sparse).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Git-compat-util.h is two dirs up, and already includes <dirent.h> (which
is the same as "dirent.h" due to -Icompat/win32 in the Makefile).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
FILENAME_MAX and MAX_PATH are both 260 on Windows, however, MAX_PATH is
used throughout the other Win32 code in Git, and also defines the length
of file name buffers in the Win32 API (e.g. WIN32_FIND_DATA.cFileName,
from which we're copying the dirent data).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Remove the union around dirent.d_type and the unused dirent.d_reclen member
(which was necessary for compatibility with the MinGW dirent runtime, which
is no longer used).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
There are no proper inodes on Windows, so remove dirent.d_ino and #define
NO_D_INO_IN_DIRENT in the Makefile (this skips e.g. an ineffective qsort in
fsck.c).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Unicode console output won't display correctly with default settings
because the default console font ("Terminal") only supports the system's
OEM charset. Unfortunately, this is a user specific setting, so it cannot
be easily fixed by e.g. some registry tricks in the setup program.
This change prints a warning on exit if console output contained non-ascii
characters and the console font is supposedly not a TrueType font (which
usually have decent Unicode support).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
GetStdHandle(STD_OUTPUT_HANDLE) doesn't work for stderr if stdout is
redirected. Use _get_osfhandle of the FILE* instead.
_isatty() is true for all character devices (including parallel and serial
ports). Check return value of GetConsoleScreenBufferInfo instead to
reliably detect console handles (also don't initialize internal state from
an uninitialized CONSOLE_SCREEN_BUFFER_INFO structure if the function
fails).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
WriteConsoleW seems to be the only way to reliably print unicode to the
console (without weird code page conversions).
Also redirects vfprintf to the winansi.c version.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git requires the TERM environment variable to be set for all color*
settings. Simulate the TERM variable if it is not set (default on Windows).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This happens to shut up t7602 on Windows which would otherwise take
the different line endings for a sign that the merge failed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This happens only when the corresponding commits are not exported in
the current fast-export run. This can happen either when the relevant
commit is already marked, or when the commit is explicitly marked
as UNINTERESTING with a negative ref by another argument.
This breaks fast-export basec remote helpers.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
On msysGit creating the post-rewrite.args file using 'echo' has different
line endings from the expected comparison. Using perl normalizes the line
endings for each generated file.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Git on Windows was made aware of the fact that sometimes a file may be
used by another process and so an operation may fail but the user might
be able to fix it and is asking for confirmation whether it should
retry.
This is implemented in a way that git only asks in case stdin and stderr
are attached to a tty. Unfortunately this seems to be misdetected
sometimes causing the testsuite to hang when git is waiting for a user
answer.
This patch works around the situation.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
This is really a problem with shell scripts being called on msysGit,
but there are more important bugs to fix for the moment.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Along the lines of 05d0e3b and f33946d, use cat instead of echo to avoid
line ending mismatches in the test result of "am empty-file does not
infloop" which make the test fail.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Again, avoid using echo (which issues DOS line endings on msysGit) to not mix
with Unix line-endings issued by git built-ins, even if this is at the cost of
calling an external executable (cat) instead of a shell built-in (echo).
In msysGit, echo used in scripts outputs DOS line-endings while built-ins
use Unix line-endings in their output. This causes t7508-status to fail
due to mixed line endings in the output of git status (which calls
git-submodule).
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
This commit fixes the issue with the handling of large files causing an
'Out of memory' perl exception. Instead of reading and writing the whole
blob at once now the blob is written in small pieces.
The problem was raised and discussed in this mail to the msysGit mailing
list: http://thread.gmane.org/gmane.comp.version-control.msysgit/12080
Signed-off-by: Gregor Uhlenheuer <kongo2002@googlemail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Incidentally, this makes grep -I respect the "binary" attribute (actually,
the "-text" attribute, but "binary" implies that).
Since the attributes are not thread-safe, we now need to switch off
threading if -I was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Gitweb is not exactly what you would call server-friendly, so let's
offload one more task onto the client.
To enable this, put something like this into your gitweb_config.perl:
$feature{'syntaxhighlighter_js'}{'default'} = [{
url => '/SyntaxHighlighter/',
style => 'Django',
theme => 'FadeToGrey'
}];
and clone git://github.com/alexgorbatchev/SyntaxHighlighter into the
directory you specified via the 'url' parameter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It appears that `pwd` returns the POSIX-style or the DOS-style path
depending which style the previous `cd` used. To normalize, enforce `pwd
-W` in scripts.
From the original e-mail exchange:
On Thu, Mar 22, 2012 at 11:13:37AM +0100, Sebastian Schuberth wrote:
> On Wed, Mar 21, 2012 at 22:21, Johannes Sixt <j6t@kdbg.org> wrote:
>
> > I build git and run its tests outside the msysgit environment. Does that
> > explain the difference? (And I use CMD.)
>
> It does not make a difference for me. I started cmd.exe at
> c:\msysgit\git\t, added c:\msysgit\bin temporarily to PATH, and ran
> "sh t5526-fetch-submodules.sh -i -v", and the test still fails.
Yes it probably does. Johannes said that he runs the tests outside of
the msysgit folder. That way there is only one path the submodule script
gets reported and not two like '/c/msysgit/git' and '/git'.
That would explain to me why it is passing.
I am afraid that the only solution is to patch msys itself to report the
long absolute path when passing window style paths to cd. Currently when
I do
cd c:/msysgit/git
I will end up in '/git' instead of the long path.
I found that there is a -W option to pwd in msys bash which makes it
always return the real windows path. A normalization in that direction
is unique and thus might be more robust. Have a look at the attached
patch. With this at least t5526 passes. I was not able to run the whole
testsuite properly at the moment. I can have a look at that tomorrow.
What do you think?
Cheers Heiko
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows XP3 in git bash
git clone git@github.com:octocat/Spoon-Knife.git
cd Spoon-Knife
git gui
menu Remote\Fetch from\origin
error: cannot spawn git: No such file or directory
error: could not run rev-list
if u run
git fetch --all
it worked normal in git bash or gitgui tools
In second version CreateProcess get 'C:\Git\libexec\git-core/git.exe' in
first version - C:/Git/libexec/git-core/git.exe and not executes (unix
slashes)
after fixing C:\Git\libexec\git-core\git.exe or
C:/Git/libexec/git-core\git.exe it works normal
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, we would like to be able to have a default http.sslCAinfo
that points to an MSys path (i.e. relative to the installation root of
Git). As Git is a MinGW program, it has to handle the conversion
of the MSys path into a MinGW32 path itself.
Since system_path() considers paths starting with '/' as absolute, we
have to convince it to make a Windows path by stripping the leading
slash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In git-send-email.perl, here are two checks to determine if
$smtp_server is an absolute path (so it'll be treated as a mailer) or
not (so it'll be treated as a hostname). The one that handles actual
mail processing has been taught to recognize Windows pathnames by
commit 33b2e81f.
The other check is just to tell the user what happened, so it's far
less important, but the current state is that we will still claim to
the user that c:/foo/bar is a server. =) This makes the second check
consistent with the first.
Signed-off-by: bert Dvornik <dvornik+git@gmail.com>
For a long time, this developer thought that Git's insistence that
pushing into the current branch is evil was completely merited.
Just for fun, the original patch tried to show people that Git is right
there, and that it causes more trouble than it does good when Git allows
you to try to update the working tree for fast-forwards, or to detach the
HEAD, depending on some config settings.
Surprisingly, the opposite was shown.
So here is the support for two new options you can give the config
variable receive.denyCurrentBranch:
'updateInstead':
Try to merge the working tree with the new tip of the branch
(which can lead to really horrible merge conflicts).
'detachInstead':
Detach the HEAD, thereby avoiding a disagreement between the
HEAD and the index (as well as the working tree), possibly
leaving the local user wondering how on earth her HEAD became
so detached.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there are dramatic problems when a command line grows
beyond PATH_MAX, which is restricted to 8191 characters on XP and
later (according to http://support.microsoft.com/kb/830473).
Work around this by just cutting off the command line at that length
(actually, at a space boundary) in the hope that only negative
refs are chucked: gitk will then do unnecessary work, but that is
still better than flashing the gitk window and exiting with exit
status 5 (which no Windows user is able to make sense of).
The first fix caused Tcl to fail to compile the regexp, see msysGit issue
427. Here is another fix without using regexp, and using a more relaxed
command line length limit to fix the original issue 387.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
