* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* mz/rebase: (32 commits)
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
rebase: factor out clean work tree check
rebase: factor out reference parsing
...
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
We only need the size, which is much cheaper to get,
especially if it is a big binary file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in builtin_diffstat assumes that a
complete_rewrite pair should have its lines counted. This is
nonsensical for binary files and leads to confusing things
like:
$ git diff --stat --summary HEAD^ HEAD
foo.rand | Bin 4096 -> 4096 bytes
1 files changed, 0 insertions(+), 0 deletions(-)
$ git diff --stat --summary -B HEAD^ HEAD
foo.rand | 34 +++++++++++++++-------------------
1 files changed, 15 insertions(+), 19 deletions(-)
rewrite foo.rand (100%)
So let's reorder the function to handle binary files first
(which from diffstat's perspective look like complete
rewrites anyway), then rewrites, then actual diffstats.
There are two bonus prizes to this reorder:
1. It gets rid of a now-superfluous goto.
2. The binary case is at the top, which means we can
further optimize it in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after
a conflicting cherry-pick. While this would preserve the original
commit's authorship, it would sadly discard cherry-pick's carefully
crafted MERGE_MSG (which contains the list of conflicts as well as the
original commit-id in the case of cherry-pick -x).
On the other hand, if a bare 'commit' were performed, it would preserve
the MERGE_MSG while resetting the authorship.
In other words, there was no way to simultaneously take the authorship
from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
This change fixes that situation. A bare 'commit' will now take the
authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
If the user wishes to reset authorship, that must now be done explicitly
via --reset-author.
A side-benefit of passing commit authorship along this way is that we
can eliminate redundant authorship parsing code from revert.c.
(Also removed an unused include from revert.c)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the git prompt (when enabled) show a CHERRY-PICKING indicator
when we are in the middle of a conflicted cherry-pick, analogous
to the existing MERGING and BISECTING flags.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick conflicts git advises:
$ git commit -c <original commit id>
to preserve the original commit message and authorship. Instead, let's
record the original commit id in CHERRY_PICK_HEAD and advise:
$ git commit -c CHERRY_PICK_HEAD
A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part.
Note that we record CHERRY_PICK_HEAD even in the case where there
are no conflicts so that we may use it to communicate authorship to
commit; this will then allow us to remove set_author_ident_env from
revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit
is used, as presumably the user intends to further edit the commit
and possibly even cherry-pick additional commits on top.
Tests and documentation contributed by Jonathan Nieder.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the tests in t3507 (cherry-pick with conflicts) begin with the
same checkout + read-tree + clean incantation to ensure a predictable
starting point. Factor out a function for that so the interesting
part of the tests is easier to read.
The "update-index --refresh" and "diff-index --exit-code HEAD" are not
necessary as the point of this testsuite is not about testing
"read-tree --reset".
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4:
git-p4: support clone --bare
git-p4: decode p4 wildcard characters
git-p4: better message for "git-p4 sync" when not cloned
git-p4: reinterpret confusing p4 message
git-p4: accommodate new move/delete type in p4
git-p4: add missing newline in initial import message
git-p4: fix key error for p4 problem
git-p4: test script
* master:
t/t7500-commit.sh: use test_cmp instead of test
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
gitweb/gitweb.perl: don't call S_ISREG() with undef
gitweb/gitweb.perl: remove use of qw(...) as parentheses
* maint:
t/t7500-commit.sh: use test_cmp instead of test
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
gitweb/gitweb.perl: don't call S_ISREG() with undef
gitweb/gitweb.perl: remove use of qw(...) as parentheses
Add new config options:
git-p4.detectCopies - Enable copy detection.
git-p4.detectCopiesHarder - Find copies harder.
The detectCopies option should be set to a true/false value.
The detectCopiesHarder option should be set to true/false value.
P4Submit can now process diff-tree C status and integrate files accordingly.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only open files for edit after integrating if the SHA1 of source and destination
differ from each other.
Add git config option detectRenames to allow permanent rename detection. This
options should be set to a true/false value.
Rename "detectRename" variable to "detectRenames" to make it more coherent with
the description in git man pages, which always use plural.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because '--immediate' stops test suite after first error, therefore in
this mode
test_debug 'cat gitweb.log'
was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.
Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).
This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.
This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:
gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.
Which caused the Git test suite to fail on this test:
./t9500-gitweb-standalone-no-errors.sh (Wstat: 256 Tests: 90 Failed: 84)
Failed tests: 1-8, 10-36, 38-45, 47-48, 50-88
Non-zero exit status: 1
Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.
The issue is that perl will now warn about this:
$ perl -wE 'for my $i qw(a b) { say $i }'
Use of qw(...) as parentheses is deprecated at -e line 1.
a
b
This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:
./t9501-gitweb-standalone-http-status.sh (Wstat: 256 Tests: 11 Failed: 10)
Failed tests: 2-11
Non-zero exit status: 1
./t9502-gitweb-standalone-parse-output.sh (Wstat: 256 Tests: 10 Failed: 9)
Failed tests: 2-10
Non-zero exit status: 1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like git clone --bare, build a .git directory but no
checked out files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option.
They are stored in %xx notation, and when checked out, p4
converts them back to normal.
This patch does the same thing when importing into git,
converting the four special characters. Without this change,
the files appear with literal %xx in their names.
Be careful not to produce "*" in filenames on windows. That
will fail.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common error is to do "git-p4 sync" in a repository that
was not initialized by "git-p4 clone". There will be no
p4 refs. The error message in this case is a traceback
for an assertion, which is confusing.
Change it instead to explain the likely problem.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error output will look like this:
glom$ git p4 clone //deopt
Importing from //deopt into .
Reinitialized existing Git repository in /tmp/x/.git/
Doing initial import of //deopt from revision #head into refs/remotes/p4/master
p4 returned an error: //deopt/... - must refer to client glom.
This particular p4 error is misleading.
Perhaps the depot path was misspelled.
Depot path: //deopt
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
562d53f (git-p4: Fix sync errors due to new server version, 2010-01-21)
taught git-p4 sync to recognize the new move/delete type, but this type
can also show up in an initial clone and labels output.
Instead of replicating the support in three places, hoist the definition
somewhere global.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some p4 failures result in an error, but the info['code'] is not
set. These include a bad p4 executable, or a core dump from p4,
and other odd internal errors where p4 fails to generate proper
marshaled output.
Make sure the info key exists before using it to avoid a python
traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to quickly dismiss potential rename pairs was broken. It
would too eagerly dismiss possible renames when all of the difference
was due to pure new data (or deleted data).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would allow rename detection to do copy detection even when asked
purely for renames. That confuses users, but more importantly it can
terminally confuse the recursive merge rename logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the find_exact_renames() function, this allows us to pass the
diff_options structure pointer to the low-level routines. We will use
that to distinguish between the "rename" and "copy" cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 86ac751 (Allow cloning an empty repository,
2009-01-23), doing:
git clone does-not-exist
has created does-not-exist as an empty repository. This was
an unintentional side effect of 86ac751. Even weirder,
doing:
git clone does-not-exist new-dir
_does_ fail, making this "feature" (if you want to consider
it such) broken. Let's detect this situation and explicitly
die. It's almost certainly not what the user intended.
This patch also adds two tests. One for the missing path
case, and one to confirm that a similar case, cloning a
non-repository directory, fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Mac OS X 10.5.0, test_terminal gets stuck reading from the pty
master every once in a while. To reproduce the problem:
perl -MIO::Pty -MFile::Copy -e '
for (my $i = 0;; $i++) {
my $master = new IO::Pty;
my $slave = $master->slave;
if (fork == 0) {
close $master or die "close: $!";
open STDOUT, ">&", $slave or die "dup2: $!";
close $slave or die "close: $!";
exec("echo", "hi", $i) or die "exec: $!";
}
close $slave or die "close: $!";
copy($master, \*STDOUT) or die "copy: $!";
close $master or die "close: $!";
wait;
}
'
It blocks after 7000 iterations or so in sysread(). The relevant
sysread() call is the second call by the parent, which presumably
executes before the child dies but after the parent has read all
output from there.
Since this is an intermitent problem, the quick check of terminal
support in lib-terminal doesn't catch it. Skip these tests on the Mac
for now.
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, patch-id trips over our very own diff extension for marking
the absence of newline at EOF.
Fix it. (Ignore it, it's whitespace.)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
