It is convenient to assume that everybody who wants to build & test Git
has access to a working `iconv` executable (after all, we already pretty
much require libiconv).
However, that limits esoteric test scenarios such as Git for Windows',
where an end user installation has to ship with `iconv` for the sole
purpose of being testable. That payload serves no other purpose.
So let's just have a test helper (to be able to test Git, the test
helpers have to be available, after all) to act as `iconv` replacement.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This helper is slightly more performant than the script with MSYS2's
Bash. And a lot more readable.
To accommodate t1050, which wants to compare files weighing in with 3MB
(falling outside of t1050's malloc limit of 1.5MB), we simply lift the
allocation limit by setting the environment variable GIT_ALLOC_LIMIT to
zero when calling the helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a bit strange, and even undesirable, to require Perl just to run
the test suite even when NO_PERL was set.
This patch does not fix this problem by any stretch of imagination.
However, it fixes *the* Perl invocation that *every single* test script
has to run.
While at it, it makes the source code also more grep'able, as the code
that unsets some, but not all, GIT_* environment variables just became a
*lot* more explicit. And all that while still reducing the total number
of lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Instead of relying on the presence of `make`, or `prove`, we might just
as well use our own facilities to run the test suite.
This helps e.g. when trying to verify a Git for Windows installation
without requiring to download a full Git for Windows SDK (which would use
up 600+ megabytes of bandwidth, and over a gigabyte of disk space).
Of course, it still requires the test helpers to be build *somewhere*,
and the Git version should at least roughly match the version from which
the test suite comes.
At the same time, this new way to run the test suite allows to validate
that a BusyBox-backed MinGit works as expected (verifying that BusyBox'
functionality is enough to at least pass the test suite).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox comes with a ton of applets ("applet" being the identical
concept to Git's "builtins"). And similar to Git's builtins, the applets
can be called via `busybox <command>`, or the BusyBox executable can be
copied/hard-linked to the command name.
The similarities do not end here. Just as with Git's builtins, it is
problematic that BusyBox' hard-linked applets cannot easily be put into
a .zip file: .zip archives have no concept of hard-links and therefore
would store identical copies (and also extract identical copies,
"inflating" the archive unnecessarily).
To counteract that issue, MinGit already ships without hard-linked
copies of the builtins, and the plan is to do the same with BusyBox'
applets: simply ship busybox.exe as single executable, without
hard-linked applets.
To accommodate that, Git is being taught by this commit a very special
trick, exploiting the fact that it is possible to call an executable
with a command-line whose argv[0] is different from the executable's
name: when `sh` is to be spawned, and no `sh` is found in the PATH, but
busybox.exe is, use that executable (with unchanged argv).
Likewise, if any executable to be spawned is not on the PATH, but
busybox.exe is found, parse the output of `busybox.exe --help` to find
out what applets are included, and if the command matches an included
applet name, use busybox.exe to execute it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The main idea of this patch is that even if we have to look up the
absolute path of the script, if only the basename was specified as
argv[0], then we should use that basename on the command line, too, not
the absolute path.
This patch will also help with the upcoming patch where we automatically
substitute "sh ..." by "busybox sh ..." if "sh" is not in the PATH but
"busybox" is: we will do that by substituting the actual executable, but
still keep prepending "sh" to the command line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This helps with minimal installations such as MinGit that refuse to
waste .zip real estate by shipping identical copies of builtins (.zip
files do not support hard links).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We really need to be able to find the test helpers... Really. This
change was forgotten when we moved the test helpers into t/helper/
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch brings support for choosing cURL's SSL backend at
runtime via http.sslBackend, based on patches already submitted to the
cURL project and backported to cURL 7.54.1 as used in Git for Windows'
SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This backports f31d23a399 (Merge branch 'bw/config-h', 2017-06-24) from
upstream Git's `master` branch, plus a patch that seems to be required
to let the test suite pass.
This topic branch fixes problems when looking up aliases in worktrees.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It gets a bit silly to add the commands to the name of the test script,
so let's just rename it while we're testing more UNC stuff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch addresses a problem identified in
https://github.com/git-for-windows/git/issues/439: while
cloning/fetching/pushing from "POSIX-ified UNC paths" (i.e. UNC paths
whose backslashes have been converted to forward slashes) works for some
time now, true UNC paths (with backslashes left intact) were handled
incorrectly. Example:
git clone //myserver/folder/repo.git
works, but
git clone \\myserver\folder\repo.git
(in CMD; in Git Bash, the backslashes would need to be doubled) used to
fail. The reason was an unexpected difference in command-line handling
between Win32 executables and MSYS2 ones (such as the shell that is used
by git-clone.exe to spawn git-upload-pack.exe).
This topic branch features a workaround *just* for the case where Git
passes stuff through sh.exe (which covers quite a few use cases,
though).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The MSYS2 runtime does its best to emulate the command-line wildcard
expansion and de-quoting which would be performed by the calling Unix
shell on Unix systems.
Those Unix shell quoting rules differ from the quoting rules applying to
Windows' cmd and Powershell, making it a little awkward to quote
command-line parameters properly when spawning other processes.
In particular, git.exe passes arguments to subprocesses that are *not*
intended to be interpreted as wildcards, and if they contain
backslashes, those are not to be interpreted as escape characters, e.g.
when passing Windows paths.
Note: this is only a problem when calling MSYS2 executables, not when
calling MINGW executables such as git.exe. However, we do call MSYS2
executables frequently, most notably when setting the use_shell flag in
the child_process structure.
There is no elegant way to determine whether the .exe file to be
executed is an MSYS2 program or a MINGW one. But since the use case of
passing a command line through the shell is so prevalent, we need to
work around this issue at least when executing sh.exe.
Let's introduce an ugly, hard-coded test whether argv[0] is "sh", and
whether it refers to the MSYS2 Bash, to determine whether we need to
quote the arguments differently than usual.
That still does not fix the issue completely, but at least it is
something.
Incidentally, this also fixes the problem where `git clone \\server\repo`
failed due to incorrect handling of the backslashes when handing the path
to the git-upload-pack process.
We need to take care to quote not only whitespace, but also curly
brackets. As aliases frequently go through the MSYS2 Bash, and
as aliases frequently get parameters such as HEAD@{yesterday}, let's
make sure that this does not regress by adding a test case for that.
Helped-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Due to a quirk in Git's method to spawn git-upload-pack, there is a
problem when passing paths with backslashes in them: Git will force the
command-line through the shell, which has different quoting semantics in
Git for Windows (being an MSYS2 program) than regular Win32 executables
such as git.exe itself.
The symptom is that the first of the two backslashes in UNC paths of the
form \\myserver\folder\repository.git is *stripped off*.
Document this bug by introducing a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The use of a trailing backslash in an argument to the `tr` command is not
portable. While this test case is very specific to Windows, anyway, we
still should avoid that warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With Windows 10 Build 14972 in Developer Mode, a new flag is supported
by CreateSymbolicLink() to create symbolic links even when running
outside of an elevated session (which was previously required).
This new flag is called SYMBOLIC_LINK_FLAG_ALLOW_UNPRIVILEGED_CREATE and
has the numeric value 0x02.
Previous Windows 10 versions will not understand that flag and return an
ERROR_INVALID_PARAMETER, therefore we have to be careful to try passing
that flag only when the build number indicates that it is supported.
For more information about the new flag, see this blog post:
https://blogs.windows.com/buildingapps/2016/12/02/symlinks-windows-10/
This patch is loosely based on the patch submitted by Samuel D. Leslie
as https://github.com/git-for-windows/git/pull/1184.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The TerminateProcess() function does not actually leave the child
processes any chance to perform any cleanup operations. This is bad
insofar as Git itself expects its signal handlers to run.
A symptom is e.g. a left-behind .lock file that would not be left behind
if the same operation was run, say, on Linux.
To remedy this situation, we use an obscure trick: we inject a thread
into the process that needs to be killed and to let that thread run the
ExitProcess() function with the desired exit status. Thanks J Wyman for
describing this trick.
The advantage is that the ExitProcess() function lets the atexit
handlers run. While this is still different from what Git expects (i.e.
running a signal handler), in practice Git sets up signal handlers and
atexit handlers that call the same code to clean up after itself.
In case that the gentle method to terminate the process failed, we still
fall back to calling TerminateProcess(), but in that case we now also
make sure that processes spawned by the spawned process are terminated;
TerminateProcess() does not give the spawned process a chance to do so
itself.
Please note that this change only affects how Git for Windows tries to
terminate processes spawned by Git's own executables. Third-party
software that *calls* Git and wants to terminate it *still* need to make
sure to imitate this gentle method, otherwise this patch will not have
any effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We newly handle isatty() by special-casing the stdin/stdout/stderr file
descriptors, caching the return value. However, we missed the case where
dup2() overrides the respective file descriptor.
That poses a problem e.g. where the `show` builtin asks for a pager very
early, the `setup_pager()` function sets the pager depending on the
return value of `isatty()` and then redirects stdout. Subsequently,
`cmd_log_init_finish()` calls `setup_pager()` *again*. What should
happen now is that `isatty()` reports that stdout is *not* a TTY and
consequently stdout should be left alone.
Let's override dup2() to handle this appropriately.
This fixes https://github.com/git-for-windows/git/issues/1077
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We should not actually expect the first `attrib.exe` in the PATH to
be the one we are looking for. Or that it is in the PATH, for that
matter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The fix we introduced in Git for Windows will be made obsolete by a more
general fix that has been already accepted into upstream Git's `next`
branch.
But we still can introduce a regression test that verifies that this bug
will be caught very quickly, if reintroduced.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like the workaround we added for t9116, t9001.83 hangs sometimes --
but not always! -- when being run in the Git for Windows SDK.
The issue seems to be related to redirection via a pipe, but it is really
hard to diagnose, what with git.exe (a non-MSYS2 program) calling a Perl
script (which is executed by an MSYS2 Perl), piping into another MSYS2
program.
As hunting time is scarce these days, simply work around this for now and
leave the real diagnosis and resolution for later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
As of a couple of weeks ago, t9116 hangs sometimes -- but not always! --
when being run in the Git for Windows SDK.
The issue seems to be related to redirection via a pipe, but it is really
hard to diagnose, what with git.exe (a non-MSYS2 program) calling a Perl
script (which is executed by an MSYS2 Perl), piping into another MSYS2
program.
As hunting time is scarce these days, simply work around this for now and
leave the real diagnosis and resolution for later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches the project generator to generate a Visual
Studio solution, ready to be opened in Visual Studio 2010 or later.
The idea, of course, is to let some automatic build job generate and
commit the project files with
make MSVC=1 vcxproj
and then (force-)push to a special-purpose branch.
The major part of this branch thicket concerns itself not only with
generating the Visual Studio project files, but making sure that the
user can then run the test suite from a regular Git Bash (i.e. *not*
requiring a Git for Windows SDK), e.g. by running
cd t
prove --timer --jobs 15 ./t[0-9]*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch adds the (experimental) --stdin/-z options to `git
reset`. Those patches are still under review in the upstream Git project,
but are already merged in their experimental form into Git for Windows'
`master` branch, in preparation for a MinGit-only release.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With the recent update in efee955 (gpg-interface: check gpg signature
creation status, 2016-06-17), we ask GPG to send all status updates to
stderr, and then catch the stderr in an strbuf.
But GPG might fail, and send error messages to stderr. And we simply
do not show them to the user.
Even worse: this swallows any interactive prompt for a passphrase. And
detaches stderr from the tty so that the passphrase cannot be read.
So while the first problem could be fixed (by printing the captured
stderr upon error), the second problem cannot be easily fixed, and
presents a major regression.
So let's just revert commit efee9553a4.
This fixes https://github.com/git-for-windows/git/issues/871
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It has been reported that core.hideDotFiles=false stopped working...
This topic branch fixes it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
