match_pathspec_depth() is a clone of match_pathspec() except that it
can take depth limit. Computation is a bit lighter compared to
match_pathspec() because it's usually precomputed and stored in struct
pathspec.
In long term, match_pathspec() and match_one() should be removed in
favor of this function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If base is already matched, skip that part when calling
fnmatch(). This happens quite often if users start a command from
worktree's subdirectory and prefix is usually prepended to all
pathspecs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
never_interesting optimization is disabled if there is any wildcard
pathspec, even if it only matches exactly on trees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose we have two pathspecs 'a' and 'a/b' (both are dirs) and depth
limit 1. In current code, pathspecs are checked in input order. When
'a/b' is checked against pathspec 'a', it fails depth limit and
therefore is excluded, although it should match 'a/b' pathspec.
This patch reorders all pathspecs alphabetically, then teaches
tree_entry_interesting() to check against the deepest pathspec first,
so depth limit of a shallower pathspec won't affect a deeper one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to replace pathspec_matches() in builtin/grep.c.
max_depth == -1 means infinite depth. Depth limit is only effective
when pathspec.recursive == 1. When pathspec.recursive == 0, the
behavior depends on match functions: non-recursive for
tree_entry_interesting() and recursive for match_pathspec{,_depth}
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In traversing trees, a full path is splitted into two parts: base
directory and entry. They are however quite often concatenated
whenever a full path is needed. Current code allocates a new buffer,
do two memcpy(), use it, then release.
Instead this patch turns "base" to a writable, extendable buffer. When
a concatenation is needed, the callee only needs to append "entry" to
base, use it, then truncate the entry out again. "base" must remain
unchanged before and after entering a function.
This avoids quite a bit of malloc() and memcpy().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be potentially used in more places than just
tree-diff.c. "struct diff_options" does not make much sense outside
diff_tree_sha1().
While removing the use of diff_options, it also removes
tree_entry_extract() call, which means S_ISDIR() uses the entry->mode
directly, without being filtered by canon_mode() (called internally
inside tree_entry_extract).
The only use of the mode information in this function is to check the
type of the entry by giving it to S_ISDIR() macro, and the result does
not change with or without canon_mode(), so it is ok to bypass
tree_entry_extract().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_options.{paths,nr_paths} will be removed later. Do not
modify them directly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old pathspec structure remains as pathspec.raw[]. New things are
stored in pathspec.items[]. There's no guarantee that the pathspec
order in raw[] is exactly as in items[].
raw[] is external (source) data and is untouched by pathspec
manipulation functions. It eases migration from old const char ** to
this new struct.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently, the 'stash show' functionality was broken for the case when a
stash-like argument was supplied. Since, commit 9bf09e, 'stash show' when
supplied a stash-like argument prints nothing and still exists with a zero
status. Unfortunately, the flaw slipped through the test suite cracks
since the output of 'stash show' was not verified to be correct.
Improve and expand on the existing tests so that this flaws is detected.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of cut do not cope well with lines that do not end in
an LF. In this case, we can completely avoid cut by using the
${var%% *} parameter expansion (suggested by Brandon Casey).
I found this problem when t3404's "avoid unnecessary reset" failed
due to the "rebase -i" not avoiding updating the tested timestamp.
On a Mac OS X 10.4.11 system:
% printf '%s' 'foo bar' | /usr/bin/cut -d ' ' -f 1
cut: stdin: Illegal byte sequence
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ancient touch on Solaris 7 thinks that a decimal number supplied as
the first argument specifies a date_time to give to the files specified by
the remaining arguments. In this case, it fails to parse '1' as a proper
date_time and exits with a failure status. Workaround this flaw by
rearranging the arguments supplied to touch so that a non-digit appears
first and touch will not be confused.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to descriptions of other options, state what -x does in imperative
mood. Start sentences for -X and --exclude-per-directory options in
capital letters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b5227d8, -x/--exclude does not apply to cached files.
This is easy to miss unless you read the discussion in the
EXCLUDE PATTERNS section. Clarify that the option applies
to untracked files and direct the reader to EXCLUDE PATTERNS.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/fix-test:
t1020: Get rid of 'cd "$HERE"' at the start of each test
t2016 (checkout -p): add missing &&
t1302 (core.repositoryversion): style tweaks
t2105 (gitfile): add missing &&
t1450 (fsck): remove dangling objects
tests: subshell indentation stylefix
Several tests: cd inside subshell instead of around
* 'master' of git://repo.or.cz/git-gui:
git-gui 0.13
git-gui: avoid mis-encoding the copyright message on Windows.
git-gui: Update Swedish translation (521t).
git-gui: ensure correct application termination in git-gui--askpass
git-gui: handle textconv filter on Windows and in development
git-gui: use shell to launch textconv filter in "blame"
git-gui: display error launching blame as a message box.
git-gui: Make usage statement visible on Windows.
On Windows the tcl script file will use the system encoding and attempting
to convert the copyright mis-encodes the string. Instead, keep the message
as ASCII and substitute in the correct unicode character when running.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
t7003-filter-branch.sh had a make_commit() function that was identical
to test_commit() in test-lib.sh except that it used tr to create a
lowercase file name from the uppercase branch name instead of
appending ".t".
Not only is this unneeded code duplication, it also was something
simply waiting to fail on case-insensitive file systems. So replace
all uses of make_commit with test_commit.
While we're editing the setup, chain it together with && so that
failures early in the sequence don't get lost and add a commit graph.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, on systems that define uint32_t as an unsigned long,
gcc complains as follows:
CC vcs-svn/fast_export.o
vcs-svn/fast_export.c: In function `fast_export_modify':
vcs-svn/fast_export.c:28: warning: unsigned int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c:28: warning: int format, uint32_t arg (arg 3)
vcs-svn/fast_export.c: In function `fast_export_commit':
vcs-svn/fast_export.c:42: warning: int format, uint32_t arg (arg 5)
vcs-svn/fast_export.c:62: warning: int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c: In function `fast_export_blob':
vcs-svn/fast_export.c:72: warning: int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c:72: warning: int format, uint32_t arg (arg 3)
CC vcs-svn/svndump.o
vcs-svn/svndump.c: In function `svndump_read':
vcs-svn/svndump.c:260: warning: int format, uint32_t arg (arg 3)
In order to suppress the warnings we use the C99 format specifier
macros PRIo32 and PRIu32 from <inttypes.h>.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define the nedmalloc feature configuration macros for nedmalloc.o, only.
This keeps assert(3) working for the rest of the git source; it was
turned off for nedmalloc users before by defining NDEBUG globally.
Also remove -DUSE_NED_ALLOCATOR as this macro isn't used anywhere.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-config(1), diff.noprefix was placed in between
diff.mnemonicprefix and the list of mnemonic prefixes, which is
obviously incorrect and very confusing to readers. Now, it is located
after the end of the explanation of mnemonicprefix, which makes much
more sense.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
