This topic branch addresses the bug where Git for Windows 2.x' Git GUI
failed to generate a working shortcut via Repository>Create Desktop
Shortcut.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is better to state clearly expectations and intentions than to assume
quietly that everybody agrees.
This Code of Conduct is the Open Code of Conduct as per
http://todogroup.org/opencodeofconduct/ (the only modifications are the
adjustments to reflect that there is no "response team" in addition to the
Git for Windows maintainer, and the addition of the link to the Open Code
of Conduct itself).
[Completely revamped, based on the Covenant 1.4 by Brendan Forster]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These fixes were necessary for Sverre Rabbelier's remote-hg to work,
but for some magic reason they are not necessary for the current
remote-hg. Makes you wonder how that one gets away with it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When a user is registered in a Windows domain, it is really easy to
obtain the email address. So let's do that.
Suggested by Lutz Roeder.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We do have the excellent GetUserInfoEx() function to obtain more
detailed information of the current user (if the user is part of a
Windows domain); Let's use it.
Suggested by Lutz Roeder.
To avoid the cost of loading Secur32.dll (even lazily, loading DLLs
takes a non-neglibile amount of time), we use the established technique
to load DLLs only when, and if, needed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, we have to emulate the fstat() call to fill out information
that takes extra effort to obtain, such as the file permissions/type.
If all we want is the file size, we can use the much cheaper
GetFileSizeEx() function (available since Windows XP).
Suggested by Philip Kelley.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Often we are mmap()ing read-only. In those cases, it is wasteful to map in
copy-on-write mode. Even worse: it can cause errors where we run out of
space in the page file.
So let's be extra careful to map files in read-only mode whenever
possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is not really helpful when a `git fetch` fails with the message:
fatal: mmap failed: No error
In the particular instance encountered by a colleague of yours truly,
the Win32 error code was ERROR_COMMITMENT_LIMIT which means that the
page file is not big enough.
Let's make the message
fatal: mmap failed: File too large
instead, which is only marginally better, but which can be associated
with the appropriate work-around: setting `core.packedGitWindowSize` to
a relatively small value.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows 2.x ships with an executable that starts the Git Bash
with all the environment variables and what not properly set up. It is
also adjusted according to the Terminal emulator option chosen when
installing Git for Windows (while `bash.exe --login -i` would always
launch with Windows' default console).
So let's use that executable (usually C:\Program Files\Git\git-bash.exe)
instead of `bash.exe --login -i` if its presence was detected.
This fixes https://github.com/git-for-windows/git/issues/490
Signed-off-by: Thomas Kläger <thomas.klaeger@10a.ch>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When calling `Repository>Create Desktop Shortcut`, Git GUI assumes
that it is okay to call `wish.exe` directly on Windows. However, in
Git for Windows 2.x' context, that leaves several crucial environment
variables uninitialized, resulting in a shortcut that does not work.
To fix those environment variable woes, Git for Windows comes with a
convenient `git-gui.exe`, so let's just use it when it is available.
This fixes https://github.com/git-for-windows/git/issues/448
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSys2 might *look* like Cygwin, but it is *not* Cygwin... Unless it
is run with `MSYSTEM=MSYS`, that is.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We no longer use any of MSVCRT's stat-functions, so there's no need to
stick to a CRT-compatible 'struct stat' either.
Define and use our own POSIX-2013-compatible 'struct stat' with nanosecond-
precision file times.
Note: Due to performance issues when using git variants with different file
time resolutions, this patch does *not* yet enable nanosecond precision in
the Makefile (use 'make USE_NSEC=1').
Signed-off-by: Karsten Blees <blees@dcon.de>
fstat() is the only stat-related CRT function for which we don't have a
full replacement yet (and thus the only reason to stick with MSVCRT's
'struct stat' definition).
Fully implement fstat(), in preparation of implementing a POSIX 2013
compatible 'struct stat' with nanosecond-precision file times.
Signed-off-by: Karsten Blees <blees@dcon.de>
Reusing cached data speeds up git-svn by quite a fair bit. However, if
the YAML module is unavailable, the caches are written to disk in an
architecture-dependent manner. That leads to problems when upgrading,
say, from 32-bit to 64-bit Git for Windows.
Let's just try to read those caches back if we detect the absence of the
YAML module and the presence of the file, and delete the file if it
could not be read back correctly.
Note that the only way to catch the error when the memoized cache could
not be read back is to put the call inside an `eval { ... }` block
because it would die otherwise; the `eval` block should also return `1`
in case of success explicitly since the function reading back the cached
data does not return an appropriate value to test for success.
This fixes https://github.com/git-for-windows/git/issues/233.
[jes: fixed the commit message, made the sign-off explicit]
Signed-off-by: Gavin Lambert <github@mirality.co.nz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there is no (single) `/etc/` directory. To address that, in
conjunction with the libgit2 project, Git for Windows introduced yet
another level of system-wide config files, located in C:\ProgramData
(and the equivalent on Windows XP).
Let's spell this out in the documentation.
This closes https://github.com/git-for-windows/git/pull/470 (because
there was no reaction in three months in that Pull Request).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
On XP, there is no %PROGRAMDATA%, therefore we need to use
"%ALLUSERSPROFILE%\Application Data\Git\config" in those setups.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
'git config' (--add / --unset etc.) automatically creates missing config
files. However, it fails with a misleading error message "could not lock
config file" if the parent directory doesn't exist.
Also create missing parent directories.
This is particularly important when calling
git config -f /non/existing/directory/config ...
We *must not* create the leading directories when locking a config file.
It is the caller's responsibility to ensure that the directory exists,
just like it is the caller's responsibility to call `git init` before
running repository operations.
Point in case: if we simply create all leading directories, calling
`git config user.name me` *outside* of a Git worktree will *create*
.git/!
This fixes https://github.com/git-for-windows/git/issues/643 and
https://groups.google.com/forum/#!topic/git-for-windows/fVRdnDIKVuw
[jes: prevented bogus .git/ directories from being created]
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When developing Git for Windows, we always have to ensure that we do not
break any non-Windows platforms, e.g. by introducing Windows-specific code
into the platform-independent source code.
At other times, it is necessary to test whether a bug is Windows-specific
or not, in order to send the bug report to the correct place. Having
access to a Linux-based Git comes in really handy in such a situation.
Vagrant offers a painless way to install and use a defined Linux
development environment on Windows (and other Operating Systems). We offer
a Vagrantfile to that end for two reasons:
1) To allow Windows users to gain the full power of Linux' Git
2) To offer users an easy path to verify that the issue they are about
to report is really a Windows-specific issue; otherwise they would
need to report it to git@vger.kernel.org instead.
Using it is easy: Download and install https://www.virtualbox.org/, then
download and install https://www.vagrantup.com/, then direct your
command-line window to the Git source directory containing the Vagrantfile
and run the commands:
vagrant up
vagrant ssh
See https://github.com/git-for-windows/git/wiki/Vagrant for details.
As part of switching Git for Windows' development environment from msysGit
to the MSys2-based Git SDK, this Vagrantfile was copy-edited from msysGit:
https://github.com/msysgit/msysgit/blob/0be8f2208/Vagrantfile
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The contract for the stat() and lstat() function is:
> stat(): stats the file pointed to by path and fills in buf.
> lstat(): is identical to stat(), except that if path is a symbolic link,
> then the link itself is stat-ed, not the file that it refers to.
stat() should always return the statistics of the file or directory a
symbolic link is pointing to. The lstat() function is used to get the
stats for the symlink. Hence the check should not be there.
Signed-off-by: Loris Chiocca <loris@chiocca.ch>
This is needed so that `_wchdir()` can be used with drive root
directories, e.g. C:\ (`_wchdir("C:")` fails to switch the directory
to the root directory).
This fixes https://github.com/msysgit/git/issues/359 (in Git for Windows
2.x only, though).
Likewise, `readlink()`'s semantics require a trailing slash for symbolic
links pointing to directories. Otherwise all checked out symbolic links
pointing to directories would be marked as modified even directly after a
fresh clone.
This fixes https://github.com/git-for-windows/git/issues/210
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Symlinks on Windows have a flag that indicates whether the target is a file
or a directory. Symlinks of wrong type simply don't work. This even affects
core Win32 APIs (e.g. DeleteFile() refuses to delete directory symlinks).
However, CreateFile() with FILE_FLAG_BACKUP_SEMANTICS doesn't seem to care.
Check the target type by first creating a tentative file symlink, opening
it, and checking the type of the resulting handle. If it is a directory,
recreate the symlink with the directory flag set.
It is possible to create symlinks before the target exists (or in case of
symlinks to symlinks: before the target type is known). If this happens,
create a tentative file symlink and postpone the directory decision: keep
a list of phantom symlinks to be processed whenever a new directory is
created in mingw_mkdir().
Limitations: This algorithm may fail if a link target changes from file to
directory or vice versa, or if the target directory is created in another
process.
Signed-off-by: Karsten Blees <blees@dcon.de>
Implement symlink() that always creates file symlinks. Fails with ENOSYS
if symlinks are disabled or unsupported.
Note: CreateSymbolicLinkW() was introduced with symlink support in Windows
Vista. For compatibility with Windows XP, we need to load it dynamically
and fail gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
Implement readlink() by reading NTFS reparse points. Works for symlinks
and directory junctions. If symlinks are disabled, fail with ENOSYS.
Signed-off-by: Karsten Blees <blees@dcon.de>
If symlinks are enabled, resolve all symlinks when changing directories,
as required by POSIX.
Note: Git's real_path() function bases its link resolution algorithm on
this property of chdir(). Unfortunately, the current directory on Windows
is limited to only MAX_PATH (260) characters. Therefore using symlinks and
long paths in combination may be problematic.
Note: GetFinalPathNameByHandleW() was introduced with symlink support in
Windows Vista. Thus, for compatibility with Windows XP, we need to load it
dynamically and behave gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
MSVCRT's _wrename() cannot rename symlinks over existing files: it returns
success without doing anything. Newer MSVCR*.dll versions probably do not
have this problem: according to CRT sources, they just call MoveFileEx()
with the MOVEFILE_COPY_ALLOWED flag.
Get rid of _wrename() and call MoveFileEx() with proper error handling.
Signed-off-by: Karsten Blees <blees@dcon.de>
_wunlink() / DeleteFileW() refuses to delete symlinks to directories. If
_wunlink() fails with ERROR_ACCESS_DENIED, try _wrmdir() as well.
Signed-off-by: Karsten Blees <blees@dcon.de>
