This operation has quadratic complexity, which is especially painful
on Windows, where shell scripts are *already* slow (mainly due to the
overhead of the POSIX emulation layer).
Let's reimplement this with linear complexity (using a hash map to
match the commits' subject lines) for the common case; Sadly, the
fixup/squash feature's design neglected performance considerations,
allowing arbitrary prefixes (read: `fixup! hell` will match the
commit subject `hello world`), which means that we are stuck with
quadratic performance in the worst case.
The reimplemented logic also happens to fix a bug where commented-out
lines (representing empty patches) were dropped by the previous code.
While at it, clarify how the fixup/squash feature works in `git rebase
-i`'s man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `git commit --fixup` command unwraps wrapped onelines when
constructing the commit message, without wrapping the result.
We need to make sure that `git rebase --autosquash` keeps handling such
cases correctly, in particular since we are about to move the autosquash
handling into the rebase--helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Note: The original code did not try to skip unnecessary picks of root
commits but punts instead (probably --root was not considered common
enough of a use case to bother optimizing). We do the same, for now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These tests were a bit anal about the *exact* warning/error message
printed by git rebase. But those messages are intended for the *end
user*, therefore it does not make sense to test so rigidly for the
*exact* wording.
In the following, we will reimplement the missing commits check in
the sequencer, with slightly different words.
So let's just test for the parts in the warning/error message that
we *really* care about, nothing more, nothing less.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is crucial to improve performance on Windows, as the speed is now
mostly dominated by the SHA-1 transformation (because it spawns a new
rev-parse process for *every* line, and spawning processes is pretty
slow from Git for Windows' MSYS2 Bash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To avoid problems with short SHA-1s that become non-unique during the
rebase, we rewrite the todo script with short/long SHA-1s before and
after letting the user edit the script. Since SHA-1s are not intuitive
for humans, rebase -i also provides the onelines (commit message
subjects) in the script, purely for the user's convenience.
It is very possible to generate a todo script via different means than
rebase -i and then to let rebase -i run with it; In this case, these
onelines are not required.
And this is where the expand/collapse machinery has a bug: it *expects*
that oneline, and failing to find one reuses the previous SHA-1 as
"oneline".
It was most likely an oversight, and made implementation in the (quite
limiting) shell script language less convoluted. However, we are about
to reimplement performance-critical parts in C (and due to spawning a
git.exe process for every single line of the todo script, the
expansion/collapsing of the SHA-1s *is* performance-hampering on
Windows), therefore let's fix this bug to make cross-validation with the
C version of that functionality possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The commands used to be indented, and it is nice to look at, but when we
transform the SHA-1s, the indentation is removed. So let's do away with it.
For the moment, at least: when we will use the upcoming rebase--helper
to transform the SHA-1s, we *will* keep the indentation and can
reintroduce it. Yet, to be able to validate the rebase--helper against
the output of the current shell script version, we need to remove the
extra indentation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The first step of an interactive rebase is to generate the so-called "todo
script", to be stored in the state directory as "git-rebase-todo" and to
be edited by the user.
Originally, we adjusted the output of `git log <options>` using a simple
sed script. Over the course of the years, the code became more
complicated. We now use shell scripting to edit the output of `git log`
conditionally, depending whether to keep "empty" commits (i.e. commits
that do not change any files).
On platforms where shell scripting is not native, this can be a serious
drag. And it opens the door for incompatibilities between platforms when
it comes to shell scripting or to Unix-y commands.
Let's just re-implement the todo script generation in plain C, using the
revision machinery directly.
This is substantially faster, improving the speed relative to the
shell script version of the interactive rebase from 2x to 3x on Windows.
Note that the rearrange_squash() function in git-rebase--interactive
relied on the fact that we set the "format" variable to the config setting
rebase.instructionFormat. Relying on a side effect like this is no good,
hence we explicitly perform that assignment (possibly again) in
rearrange_squash().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
An upcoming patch will move the todo list generation into the
rebase--helper. An early version of that patch regressed on an empty
rebase.instructionFormat value (the shell version could not discern
between an empty one and a non-existing one, but the C version used the
empty one as if that was intended to skip the oneline from the `pick
<hash>` lines).
Let's verify that this still works as before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We have this loop where we try to remove the read-only attribute when
rename() fails and try again. If it fails again, let's not try to remove
the read-only attribute and try *again*.
This fixes https://github.com/git-for-windows/git/issues/1299
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These changes are necessary to support better Git for Windows' new
auto-update feature.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"Question?" is maybe not the most informative thing to ask. In the
absence of better information, it is the best we can do, of course.
However, Git for Windows' auto updater just learned the trick to use
git-gui--askyesno to ask the user whether to update now or not. And in
this scripted scenario, we can easily pass a command-line option to
change the window title.
So let's support that with the new `--title <title>` option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The text wrapping seems to be aligned to the right side of the Yes
button, leaving an awful lot of empty space.
Let's try to counter this by using pixel units.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add .LIBs for zlib and openssl to <AdditionalDependencies>
to help linker when building with VS2017.
This closes https://github.com/git-for-windows/git/issues/1234
Note: this patch still leaves a couple of TODOs:
- It should be possible to add GEN.DEPS\lib to
<AdditionalLibraryDependencies> and then just set
<AdditionalDependencies> to the library basenames.
- Likewise, you should be able to copy GEN.DEPS\bin\*.dll
to the destination directory rather than using the full
paths in the $afterTargets lines.
(This is in line with items in <AdditionalIncludeDirectories>
referencing GEN.DEPS\include.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Toolset v120 corresponds to Visual Studio 2013. We already used
dependencies that were hardcoded to v140 (i.e. Visual Studio 2015), so
let's just remove the cruft.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We run `git rev-parse` though the shell, and quote its
argument only with single-quotes. This prevents most
metacharacters from being a problem, but misses the obvious
case when $name itself has single-quotes in it. We can fix
this by applying the usual shell-quoting formula.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refnames can contain shell metacharacters which need to be
passed verbatim to sub-processes. Using safe_pipe_capture
skips the shell entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-cvsserver script is old and largely unmaintained
these days. But git-shell allows untrusted users to run it
out of the box, significantly increasing its attack surface.
Let's drop it from git-shell's list of internal handlers so
that it cannot be run by default. This is not backwards
compatible. But given the age and development activity on
CVS-related parts of Git, this is likely to impact very few
users, while helping many more (i.e., anybody who runs
git-shell and had no intention of supporting CVS).
There's no configuration mechanism in git-shell for us to
add a boolean and flip it to "off". But there is a mechanism
for adding custom commands, and adding CVS support here is
fairly trivial. Let's document it to give guidance to
anybody who really is still running cvsserver.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the documentation of said setting:
This boolean will enable fsync() when writing object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems
that do not use journalling (traditional UNIX filesystems) or
that only journal metadata and not file contents (OS X’s HFS+,
or Linux ext3 with "data=writeback").
The most common file system on Windows (NTFS) does not guarantee that
order, therefore a sudden loss of power (or any other event causing an
unclean shutdown) would cause corrupt files (i.e. files filled with
NULs). Therefore we need to change the default.
Note that the documentation makes it sound as if this causes really bad
performance. In reality, writing loose objects is something that is done
only rarely, and only a handful of files at a time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows supports the core.longPaths config setting to allow
writing/reading long paths via the \\?\ trick for a long time now.
However, for that support to work, it is absolutely necessary that
git_default_config() is given a chance to parse the config. Otherwise
Git will be non the wiser.
So let's make sure that as many commands that previously failed to
parse the core.* settings now do that, implicitly enabling long path
support in a lot more places.
Note: this is not a perfect solution, and it cannot be, as there is
a chicken-and-egg problem in reading the config itself...
This fixes https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A regression was introduced into Git for Windows v2.13.* via a
half-finished refactoring of the refs handling. This refactoring has
been completed in the meantime, but is was only merged into upstream's
`master` branch, i.e. it was not integrated into the maintenance track.
Git for Windows is used quite a bit in enterprise settings, though,
where a large number of refs is quite common, and therefore the
regression really hurts.
So let's take this regression fix earlier than upstream Git.
This fixes https://github.com/git-for-windows/git/issues/1233.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A ton of Git commands simply do not read (or at least parse) the core.*
settings. This is not good, as Git for Windows relies on the
core.longPaths setting to be read quite early on.
So let's just make sure that all commands read the config and give
platform_core_config() a chance.
This patch teaches tons of Git commands to respect the config setting
`core.longPaths = true`, including `pack-refs`, thereby fixing
https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch teaches Git to accept UNC paths of the form
file://host/share/repository.git.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach the top-level git Makefile to use whatever VS compiler
tool chain is installed on the system.
When building git from the command line in a git-sdk BASH
window with MAKE, the shell environment has environment
variables for GCC tools, but not MSVC tools. MSVC bindings
are only avaliable from the various "VcVarsAll.bat" scripts
run by the "Developer Command Prompt" shortcuts.
Add compat/vcbuild/find_vs_env.bat to the Makefile. It
uses the various "VcVarsAll.bat" scripts in a background
Developer Command Prompt process to compute the proper
environment variables and publish them for use by the Makefile.
[jes: fixed typos, used %SystemRoot% instead of C:\WINDOWS]
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Extend the parser to accept file://server/share/repo in the way that
Windows users expect it to be parsed who are used to referring to file
shares by UNC paths of the form \\server\share\folder.
[jes: tightened check to avoid handling file://C:/some/path as a UNC
path.]
This closes https://github.com/git-for-windows/git/issues/1264.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch brings slightly experimental changes supporting Git
for Windows to use BusyBox-w32 to execute its shell scripts as well as
its test suite.
The test suite can be run by installing the test artifacts into a MinGit
that has busybox.exe (and using Git for Windows' SDK's Perl for now, as
the test suite requires Perl even when NO_PERL is set, go figure) by
using the `install-mingit-test-artifacts` Makefile target with the
DESTDIR variable pointing to the top-level directory of the MinGit
installation.
To facilitate running the test suite (without having `make` available,
as `make.exe` is not part of MinGit), this branch brings an experimental
patch to the `test-run-command` helper to run Git's test suite. It is
still very experimental, though: in this developer's tests it seemed
that the `poll()` emulation required for `run_parallel_processes()` to
work sometimes hiccups on Windows, causing infinite "hangs". It is also
possible that BusyBox itself has problems writing to the pipes opened by
`test-run-command` (and merging this branch will help investigate
further). Caveat emptor.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Makefile target `install-mingit-test-artifacts` simply copies stuff
and things directly into a MinGit directory, including an init.bat
script to set everything up so that the tests can be run in a cmd
window.
Sadly, Git's test suite still relies on a Perl interpreter even if
compiled with NO_PERL=YesPlease. We punt for now, installing a small
script into /usr/bin/perl that hands off to an existing Perl of a Git
for Windows SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the BusyBox-w32 version that is currently under consideration for
MinGit for Windows (to reduce the .zip size, and to avoid problems with
the MSYS2 runtime), the UTF-16 environment present in Windows is
considered to be authoritative, and the 8-bit version is always in UTF-8
encoding.
As a consequence, the ISO-8859-1 test in t9350-fast-export (which tries
to set GIT_AUTHOR_NAME to a ISO-8859-1 encoded value) *must* fail in
that setup.
So let's detect when it would fail (due to an environment being purely
kept UTF-8 encoded), and skip that test in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, the current working directory is pretty much guaranteed to
contain a colon. If we feed that path to CVS, it mistakes it for a
separator between host and port, though.
This has not been a problem so far because Git for Windows uses MSYS2's
Bash using a POSIX emulation layer that also pretends that the current
directory is a Unix path (at least as long as we're in a shell script).
However, that is rather limiting, as Git for Windows also explores other
ports of other Unix shells. One of those is BusyBox-w32's ash, which is
a native port (i.e. *not* using any POSIX emulation layer, and certainly
not emulating Unix paths).
So let's just detect if there is a colon in $PWD and punt in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox' find implementation does not understand the -ls option, so
let's not use it when we're running inside BusyBox.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
