At the end of the status command, disable and free the fscache so that we
don't leak the memory and so that we can dump the fscache statistics.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Use FindFirstFileExW with FindExInfoBasic to avoid forcing NTFS to look up
the short name. Also switch to a larger (64K vs 4K) buffer using
FIND_FIRST_EX_LARGE_FETCH to minimize round trips to the kernel.
In a repo with ~200K files, this drops warm cache status times from 3.19
seconds to 2.67 seconds for a 16% savings.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
To avoid having to play tricks as in earlier rounds, we bit the sour
apple and rebased the `builtin-stash-rebase-v3` branch thicket onto the
commit starting Git for Windows' merging-rebase.
(The merging-rebase pulls in the previous branch thicket via a "fake
merge", i.e. a merge commit that does not actually apply any changes
from the merged commit history. This has the unfortunate side effect of
confusing `merge` into thinking that any branch that was merged into an
earlier round does not need to be merged again.)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This fixes the issue identified in
https://github.com/git-for-windows/git/issues/1498
where Git would not fall back to reading credentials from a Win32
Console when the credentials could not be read from the terminal via the
Bash hack (that is necessary to support running in a MinTTY).
Tested in a Powershell window.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch brings slightly experimental changes supporting Git
for Windows to use BusyBox-w32 to execute its shell scripts as well as
its test suite.
The test suite can be run by installing the test artifacts into a MinGit
that has busybox.exe (and using Git for Windows' SDK's Perl for now, as
the test suite requires Perl even when NO_PERL is set, go figure) by
using the `install-mingit-test-artifacts` Makefile target with the
DESTDIR variable pointing to the top-level directory of the MinGit
installation.
To facilitate running the test suite (without having `make` available,
as `make.exe` is not part of MinGit), this branch brings an experimental
patch to the `test-run-command` helper to run Git's test suite. It is
still very experimental, though: in this developer's tests it seemed
that the `poll()` emulation required for `run_parallel_processes()` to
work sometimes hiccups on Windows, causing infinite "hangs". It is also
possible that BusyBox itself has problems writing to the pipes opened by
`test-run-command` (and merging this branch will help investigate
further). Caveat emptor.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When spawning child processes, we do want them to inherit the standard
handles so that we can talk to them. We do *not* want them to inherit
any other handle, as that would hold a lock to the respective files
(preventing them from being renamed, modified or deleted), and the child
process would not know how to access that handle anyway.
Happily, there is an API to make that happen. It is supported in Windows
Vista and later, which is exactly what we promise to support in Git for
Windows for the time being.
This also means that we lift, at long last, the target Windows version
from Windows XP to Windows Vista.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows supports the core.longPaths config setting to allow
writing/reading long paths via the \\?\ trick for a long time now.
However, for that support to work, it is absolutely necessary that
git_default_config() is given a chance to parse the config. Otherwise
Git will be non the wiser.
So let's make sure that as many commands that previously failed to
parse the core.* settings now do that, implicitly enabling long path
support in a lot more places.
Note: this is not a perfect solution, and it cannot be, as there is
a chicken-and-egg problem in reading the config itself...
This fixes https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the branch thicket of patches in Git for Windows that are
considered ready for upstream. To keep them in a ready-to-submit shape,
they are kept as close to the beginning of the branch thicket as
possible.
It turns out that when running in a Powershell window, we need to turn
on ENABLE_ECHO_INPUT because the default would be *not* to echo
anything.
This also ensures that we use the input mode where all input is read
until the user hits the Return key.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To support Git Bash running in a MinTTY, we use a dirty trick to access
the MSYS2 pseudo terminal: we execute a Bash snippet that accesses
/dev/tty.
The idea was to fall back to writing to/reading from CONOUT$/CONIN$ if
that Bash call failed because Bash was not found.
However, we should fall back even in other error conditions, because we
have not successfully read the user input. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When trying to query the user directly via /dev/tty, both WSL's bash and
BusyBox' bash emulation seem to have problems printing the value that
they just read. The bash just stops in those instances, does not even
execute any commands after the echo command.
Let's just work around this by running the Bash snippet only in MSYS2's
Bash: its `SHELL` variable has the `.exe` suffix, and neither WSL's nor
BusyBox' bash set the `SHELL` variable to a path with that suffix. In
the latter case, we simply exit with code 127 (indicating that the
command was not found) and fall back to the CONIN$/CONOUT$ method
quietly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Makefile target `install-mingit-test-artifacts` simply copies stuff
and things directly into a MinGit directory, including an init.bat
script to set everything up so that the tests can be run in a cmd
window.
Sadly, Git's test suite still relies on a Perl interpreter even if
compiled with NO_PERL=YesPlease. We punt for now, installing a small
script into /usr/bin/perl that hands off to an existing Perl of a Git
for Windows SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the BusyBox-w32 version that is currently under consideration for
MinGit for Windows (to reduce the .zip size, and to avoid problems with
the MSYS2 runtime), the UTF-16 environment present in Windows is
considered to be authoritative, and the 8-bit version is always in UTF-8
encoding.
As a consequence, the ISO-8859-1 test in t9350-fast-export (which tries
to set GIT_AUTHOR_NAME to a ISO-8859-1 encoded value) *must* fail in
that setup.
So let's detect when it would fail (due to an environment being purely
kept UTF-8 encoded), and skip that test in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, the current working directory is pretty much guaranteed to
contain a colon. If we feed that path to CVS, it mistakes it for a
separator between host and port, though.
This has not been a problem so far because Git for Windows uses MSYS2's
Bash using a POSIX emulation layer that also pretends that the current
directory is a Unix path (at least as long as we're in a shell script).
However, that is rather limiting, as Git for Windows also explores other
ports of other Unix shells. One of those is BusyBox-w32's ash, which is
a native port (i.e. *not* using any POSIX emulation layer, and certainly
not emulating Unix paths).
So let's just detect if there is a colon in $PWD and punt in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox' find implementation does not understand the -ls option, so
let's not use it when we're running inside BusyBox.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows uses MSYS2's Bash to run the test suite, which comes
with benefits but also at a heavy price: on the plus side, MSYS2's
POSIX emulation layer allows us to continue pretending that we are on a
Unix system, e.g. use Unix paths instead of Windows ones, yet this is
bought at a rather noticeable performance penalty.
There *are* some more native ports of Unix shells out there, though,
most notably BusyBox-w32's ash. These native ports do not use any POSIX
emulation layer (or at most a *very* thin one, choosing to avoid
features such as fork() that are expensive to emulate on Windows), and
they use native Windows paths (usually with forward slashes instead of
backslashes, which is perfectly legal in almost all use cases).
And here comes the problem: with a $PWD looking like, say,
C:/git-sdk-64/usr/src/git/t/trash directory.t5813-proto-disable-ssh
Git's test scripts get quite a bit confused, as their assumptions have
been shattered. Not only does this path contain a colon (oh no!), it
also does not start with a slash.
This is a problem e.g. when constructing a URL as t5813 does it:
ssh://remote$PWD. Not only is it impossible to separate the "host" from
the path with a $PWD as above, even prefixing $PWD by a slash won't
work, as /C:/git-sdk-64/... is not a valid path.
As a workaround, detect when $PWD does not start with a slash on
Windows, and simply strip the drive prefix, using an obscure feature of
Windows paths: if an absolute Windows path starts with a slash, it is
implicitly prefixed by the drive prefix of the current directory. As we
are talking about the current directory here, anyway, that strategy
works.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When t5605 tries to verify that files are hardlinked (or that they are
not), it uses the `-links` option of the `find` utility.
BusyBox' implementation does not support that option, and BusyBox-w32's
lstat() does not even report the number of hard links correctly (for
performance reasons).
So let's just switch to a different method that actually works on
Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While it may seem super convenient to some old Unix hands to simpy
require Perl to be available when running the test suite, this is a
major hassle on Windows, where we want to verify that Perl is not,
actually, required in a NO_PERL build.
As a super ugly workaround, we "install" a script into /usr/bin/perl
reading like this:
#!/bin/sh
# We'd much rather avoid requiring Perl altogether when testing
# an installed Git. Oh well, that's why we cannot have nice
# things.
exec c:/git-sdk-64/usr/bin/perl.exe "$@"
The problem with that is that BusyBox assumes that the #! line in a
script refers to an executable, not to a script. So when it encounters
the line #!/usr/bin/perl in t5532's proxy-get-cmd, it barfs.
Let's help this situation by simply executing the Perl script with the
"interpreter" specified explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox' unzip is working pretty well. But Git's tests want to abuse it
to not only extract files, but to convert their line endings on the fly,
too. BusyBox' unzip does not support that, and it would appear that
it would require rather intrusive changes.
So let's just work around this by skipping the test case that uses
`unzip -a` and the subsequent test cases expecting `unzip -a`'s output.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
At some stage, t5003-archive-zip wants to add a file that is not ASCII.
To that end, it uses /bin/sh. But that file may actually not exist (it
is too easy to forget that not all the world is Unix/Linux...)! Besides,
we already have perfectly fine binary files intended for use solely by
the tests. So let's use one of them instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Everybody and their dogs, cats and other pets settled on using unified
diffs. It is a really quaint holdover from a long-gone era that GNU diff
outputs "normal" diff by default.
Yet, t4124 relied on that mode.
This mode is so out of fashion in the meantime, though, that e.g.
BusyBox' diff decided not even to bother to support it. It only supports
unified diffs.
So let's just switch away from "normal" diffs and use unified diffs, as
we really are only interested in the `+` lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, it is impossible to create a file whose name contains a
quote character. We already excluded test cases using such files from
running on Windows when git.exe itself was tested.
However, we still had two test cases that try to create such a file, and
redirect stdin from such a file, respectively. This *seems* to work in
Git for Windows' Bash due to an obscure feature inherited from Cygwin:
illegal filename characters are simply mapped into/from a private UTF-8
page. Pure Win32 programs (such as git.exe) *still* cannot work with
those files, of course, but at least Unix shell scripts pretend to be
able to.
This entire strategy breaks down when switching to any Unix shell
lacking support for that private UTF-8 page trick, e.g. BusyBox-w32's
ash. So let's just exclude test cases that test whether the Unix shell
can redirect to/from files with "funny names" those from running on
Windows, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Since c6b0831c9c (docs: warn about possible '=' in clean/smudge filter
process values, 2016-12-03), t0021 writes out a file with quotes in its
name, and MSYS2's path conversion heuristics mistakes that to mean that
we are not talking about a path here.
Therefore, we need to use Windows paths, as the test-helper is a Win32
program that would otherwise have no idea where to look for the file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
