This topic branch teaches Git to accept UNC paths of the form
file://host/share/repository.git.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch brings slightly experimental changes supporting Git
for Windows to use BusyBox-w32 to execute its shell scripts as well as
its test suite.
The test suite can be run by installing the test artifacts into a MinGit
that has busybox.exe (and using Git for Windows' SDK's Perl for now, as
the test suite requires Perl even when NO_PERL is set, go figure) by
using the `install-mingit-test-artifacts` Makefile target with the
DESTDIR variable pointing to the top-level directory of the MinGit
installation.
To facilitate running the test suite (without having `make` available,
as `make.exe` is not part of MinGit), this branch brings an experimental
patch to the `test-run-command` helper to run Git's test suite. It is
still very experimental, though: in this developer's tests it seemed
that the `poll()` emulation required for `run_parallel_processes()` to
work sometimes hiccups on Windows, causing infinite "hangs". It is also
possible that BusyBox itself has problems writing to the pipes opened by
`test-run-command` (and merging this branch will help investigate
further). Caveat emptor.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch brings support for choosing cURL's SSL backend at
runtime via http.sslBackend, based on patches already submitted to the
cURL project and backported to cURL 7.54.1 as used in Git for Windows'
SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This backports f31d23a399 (Merge branch 'bw/config-h', 2017-06-24) from
upstream Git's `master` branch, plus a patch that seems to be required
to let the test suite pass.
This topic branch fixes problems when looking up aliases in worktrees.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Extend the parser to accept file://server/share/repo in the way that
Windows users expect it to be parsed who are used to referring to file
shares by UNC paths of the form \\server\share\folder.
[jes: tightened check to avoid handling file://C:/some/path as a UNC
path.]
This closes https://github.com/git-for-windows/git/issues/1264.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Makefile target `install-mingit-test-artifacts` simply copies stuff
and things directly into a MinGit directory, including an init.bat
script to set everything up so that the tests can be run in a cmd
window.
Sadly, Git's test suite still relies on a Perl interpreter even if
compiled with NO_PERL=YesPlease. We punt for now, installing a small
script into /usr/bin/perl that hands off to an existing Perl of a Git
for Windows SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Pull Request at https://github.com/curl/curl/pull/1601 adds support
for choosing the SSL backend at runtime to cURL, and will hopefully be
merged before version 7.56.0 comes out.
Git for Windows will ship with those patches backported to 7.54.1 (and
come August 9th, 2017, 7.55.0 and later).
This patch adds the Git side of that feature: by setting http.sslBackend
to "openssl" or "schannel", Git for Windows can now choose the SSL
backend at runtime.
This comes in handy because Secure Channel ("schannel") is the native
Windows solution, accessing the Windows Credential Store, thereby
allowing for enterprise-wide management of certificates. For historical
reasons, Git for Windows needs to support OpenSSL still, as it has
previously been the only supported SSL backend in Git for Windows for
almost a decade.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It gets a bit silly to add the commands to the name of the test script,
so let's just rename it while we're testing more UNC stuff.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch addresses a problem identified in
https://github.com/git-for-windows/git/issues/439: while
cloning/fetching/pushing from "POSIX-ified UNC paths" (i.e. UNC paths
whose backslashes have been converted to forward slashes) works for some
time now, true UNC paths (with backslashes left intact) were handled
incorrectly. Example:
git clone //myserver/folder/repo.git
works, but
git clone \\myserver\folder\repo.git
(in CMD; in Git Bash, the backslashes would need to be doubled) used to
fail. The reason was an unexpected difference in command-line handling
between Win32 executables and MSYS2 ones (such as the shell that is used
by git-clone.exe to spawn git-upload-pack.exe).
This topic branch features a workaround *just* for the case where Git
passes stuff through sh.exe (which covers quite a few use cases,
though).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the BusyBox-w32 version that is currently under consideration for
MinGit for Windows (to reduce the .zip size, and to avoid problems with
the MSYS2 runtime), the UTF-16 environment present in Windows is
considered to be authoritative, and the 8-bit version is always in UTF-8
encoding.
As a consequence, the ISO-8859-1 test in t9350-fast-export (which tries
to set GIT_AUTHOR_NAME to a ISO-8859-1 encoded value) *must* fail in
that setup.
So let's detect when it would fail (due to an environment being purely
kept UTF-8 encoded), and skip that test in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The MSYS2 runtime does its best to emulate the command-line wildcard
expansion and de-quoting which would be performed by the calling Unix
shell on Unix systems.
Those Unix shell quoting rules differ from the quoting rules applying to
Windows' cmd and Powershell, making it a little awkward to quote
command-line parameters properly when spawning other processes.
In particular, git.exe passes arguments to subprocesses that are *not*
intended to be interpreted as wildcards, and if they contain
backslashes, those are not to be interpreted as escape characters, e.g.
when passing Windows paths.
Note: this is only a problem when calling MSYS2 executables, not when
calling MINGW executables such as git.exe. However, we do call MSYS2
executables frequently, most notably when setting the use_shell flag in
the child_process structure.
There is no elegant way to determine whether the .exe file to be
executed is an MSYS2 program or a MINGW one. But since the use case of
passing a command line through the shell is so prevalent, we need to
work around this issue at least when executing sh.exe.
Let's introduce an ugly, hard-coded test whether argv[0] is "sh", and
whether it refers to the MSYS2 Bash, to determine whether we need to
quote the arguments differently than usual.
That still does not fix the issue completely, but at least it is
something.
Incidentally, this also fixes the problem where `git clone \\server\repo`
failed due to incorrect handling of the backslashes when handing the path
to the git-upload-pack process.
We need to take care to quote not only whitespace, but also curly
brackets. As aliases frequently go through the MSYS2 Bash, and
as aliases frequently get parameters such as HEAD@{yesterday}, let's
make sure that this does not regress by adding a test case for that.
Helped-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to specify absolute paths without the drive
prefix e.g. when cloning.
Example:
C:\Users\me> git clone https://github.com/git/git \upstream-git
This will clone into a new directory C:\upstream-git, in line with how
Windows interprets absolute paths.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to skip the gettext initialization
when the locale directory does not even exist.
This saves 150ms out of 210ms for a simply `git version` call on
Windows, and it most likely will help scripts that call out to
`git.exe` hundreds of times.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With Windows 10 Build 14972 in Developer Mode, a new flag is supported
by CreateSymbolicLink() to create symbolic links even when running
outside of an elevated session (which was previously required).
This new flag is called SYMBOLIC_LINK_FLAG_ALLOW_UNPRIVILEGED_CREATE and
has the numeric value 0x02.
Previous Windows 10 versions will not understand that flag and return an
ERROR_INVALID_PARAMETER, therefore we have to be careful to try passing
that flag only when the build number indicates that it is supported.
For more information about the new flag, see this blog post:
https://blogs.windows.com/buildingapps/2016/12/02/symlinks-windows-10/
This patch is loosely based on the patch submitted by Samuel D. Leslie
as https://github.com/git-for-windows/git/pull/1184.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Win32 CONDITION_VARIABLE has better performance and is easier to
maintain.
Since CONDITION_VARIABLE is not available in Windows XP and below,
old implementation of pthread_cond_t is kept under define guard
'GIT_WIN_XP_SUPPORT'. To enable old implementation, build with
make CFLAGS="-DGIT_WIN_XP_SUPPORT".
Signed-off-by: Loo Rong Jie <loorongjie@gmail.com>
fast-forwarded.
On Windows, the current working directory is pretty much guaranteed to
contain a colon. If we feed that path to CVS, it mistakes it for a
separator between host and port, though.
This has not been a problem so far because Git for Windows uses MSYS2's
Bash using a POSIX emulation layer that also pretends that the current
directory is a Unix path (at least as long as we're in a shell script).
However, that is rather limiting, as Git for Windows also explores other
ports of other Unix shells. One of those is BusyBox-w32's ash, which is
a native port (i.e. *not* using any POSIX emulation layer, and certainly
not emulating Unix paths).
So let's just detect if there is a colon in $PWD and punt in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Due to a quirk in Git's method to spawn git-upload-pack, there is a
problem when passing paths with backslashes in them: Git will force the
command-line through the shell, which has different quoting semantics in
Git for Windows (being an MSYS2 program) than regular Win32 executables
such as git.exe itself.
The symptom is that the first of the two backslashes in UNC paths of the
form \\myserver\folder\repository.git is *stripped off*.
Document this bug by introducing a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The TerminateProcess() function does not actually leave the child
processes any chance to perform any cleanup operations. This is bad
insofar as Git itself expects its signal handlers to run.
A symptom is e.g. a left-behind .lock file that would not be left behind
if the same operation was run, say, on Linux.
To remedy this situation, we use an obscure trick: we inject a thread
into the process that needs to be killed and to let that thread run the
ExitProcess() function with the desired exit status. Thanks J Wyman for
describing this trick.
The advantage is that the ExitProcess() function lets the atexit
handlers run. While this is still different from what Git expects (i.e.
running a signal handler), in practice Git sets up signal handlers and
atexit handlers that call the same code to clean up after itself.
In case that the gentle method to terminate the process failed, we still
fall back to calling TerminateProcess(), but in that case we now also
make sure that processes spawned by the spawned process are terminated;
TerminateProcess() does not give the spawned process a chance to do so
itself.
Please note that this change only affects how Git for Windows tries to
terminate processes spawned by Git's own executables. Third-party
software that *calls* Git and wants to terminate it *still* need to make
sure to imitate this gentle method, otherwise this patch will not have
any effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When specifying an absolute path without a drive prefix, we convert that
path internally. Let's make sure that we handle that case properly, too
;-)
This fixes the command
git clone https://github.com/git-for-windows/git \G4W
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We newly handle isatty() by special-casing the stdin/stdout/stderr file
descriptors, caching the return value. However, we missed the case where
dup2() overrides the respective file descriptor.
That poses a problem e.g. where the `show` builtin asks for a pager very
early, the `setup_pager()` function sets the pager depending on the
return value of `isatty()` and then redirects stdout. Subsequently,
`cmd_log_init_finish()` calls `setup_pager()` *again*. What should
happen now is that `isatty()` reports that stdout is *not* a TTY and
consequently stdout should be left alone.
Let's override dup2() to handle this appropriately.
This fixes https://github.com/git-for-windows/git/issues/1077
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The runtime of a simple `git.exe version` call on Windows is currently
dominated by the gettext setup, adding a whopping ~150ms to the ~210ms
total.
Given that this cost is added to each and every git.exe invocation goes
through common-main's invocation of git_setup_gettext(), and given that
scripts have to call git.exe dozens, if not hundreds, of times, this is
a substantial performance penalty.
This is particularly pointless when considering that Git for Windows
ships without localization (to keep the installer's size to a bearable
~34MB): all that time setting up gettext is for naught.
So let's be smart about it and skip setting up gettext if the locale
directory is not even present.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox' find implementation does not understand the -ls option, so
let's not use it when we're running inside BusyBox.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The use of a trailing backslash in an argument to the `tr` command is not
portable. While this test case is very specific to Windows, anyway, we
still should avoid that warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there are several categories of absolute paths. One such
category starts with a backslash and is implicitly relative to the
drive associated with the current working directory. Example:
c:
git clone https://github.com/git-for-windows/git \G4W
should clone into C:\G4W.
There is currently a problem with that, in that mingw_mktemp() does not
expect the _wmktemp() function to prefix the absolute path with the
drive prefix, and as a consequence, the resulting path does not fit into
the originally-passed string buffer. The symptom is a "Result too large"
error.
Reported by Juan Carlos Arevalo Baeza.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We should not actually expect the first `attrib.exe` in the PATH to
be the one we are looking for. Or that it is in the PATH, for that
matter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, we simply pass a POSIX path to bindtextdomain(), relying on
the current libintl-8.dll implementation to handle that gracefully by
resolving the path relative to the "root" directory inferred from the
location of the .dll file itself.
However, not only does this rely on the custom patches of the gettext
library as shipped with MSYS2 (gettext's own source code is not prepared
to handle POSIX paths on Windows), it also means that Git itself cannot
use the `podir` variable at all because it does not handle absolute
POSIX paths in system_path() correctly, leaving them as-is.
This patch fixes that behavior by always using a GIT_LOCALE_PATH
relative to the (runtime) prefix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows uses MSYS2's Bash to run the test suite, which comes
with benefits but also at a heavy price: on the plus side, MSYS2's
POSIX emulation layer allows us to continue pretending that we are on a
Unix system, e.g. use Unix paths instead of Windows ones, yet this is
bought at a rather noticeable performance penalty.
There *are* some more native ports of Unix shells out there, though,
most notably BusyBox-w32's ash. These native ports do not use any POSIX
emulation layer (or at most a *very* thin one, choosing to avoid
features such as fork() that are expensive to emulate on Windows), and
they use native Windows paths (usually with forward slashes instead of
backslashes, which is perfectly legal in almost all use cases).
And here comes the problem: with a $PWD looking like, say,
C:/git-sdk-64/usr/src/git/t/trash directory.t5813-proto-disable-ssh
Git's test scripts get quite a bit confused, as their assumptions have
been shattered. Not only does this path contain a colon (oh no!), it
also does not start with a slash.
This is a problem e.g. when constructing a URL as t5813 does it:
ssh://remote$PWD. Not only is it impossible to separate the "host" from
the path with a $PWD as above, even prefixing $PWD by a slash won't
work, as /C:/git-sdk-64/... is not a valid path.
As a workaround, detect when $PWD does not start with a slash on
Windows, and simply strip the drive prefix, using an obscure feature of
Windows paths: if an absolute Windows path starts with a slash, it is
implicitly prefixed by the drive prefix of the current directory. As we
are talking about the current directory here, anyway, that strategy
works.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When we access IPv6-related functions, we load the corresponding system
library using the `LoadLibrary()` function, which is not the recommended
way to load system libraries.
In practice, it does not make a difference: the `ws2_32.dll` library
containing the IPv6 functions is already loaded into memory, so
LoadLibrary() simply reuses the already-loaded library.
Still, recommended way is recommended way, so let's use that instead.
While at it, also adjust the code in contrib/ that loads system libraries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The fix we introduced in Git for Windows will be made obsolete by a more
general fix that has been already accepted into upstream Git's `next`
branch.
But we still can introduce a regression test that verifies that this bug
will be caught very quickly, if reintroduced.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there is no single root directory. And what Git thinks is a
root directory is not a root directory at all: everything is relative to
the location where Git is installed.
To handle this situation better, let's just allow for GIT_TEXTDOMAINDIR
to be a path relative to the (runtime) prefix.
To that end, we have to switch the order in which common-main handles
argv0 and sets up gettext: in order to have access to the runtime
prefix, we need it to be inferred from argv0 already.
This patch also prepares for GIT_LOCALE_PATH to be relative to prefix,
which is the even more important fix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When t5605 tries to verify that files are hardlinked (or that they are
not), it uses the `-links` option of the `find` utility.
BusyBox' implementation does not support that option, and BusyBox-w32's
lstat() does not even report the number of hard links correctly (for
performance reasons).
So let's just switch to a different method that actually works on
Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When git.rc is compiled into git.res, the result is actually dependent
on the architecture. That is, you cannot simply link a 32-bit git.res
into a 64-bit git.exe.
Therefore, to allow 32-bit and 64-bit builds in the same directory, we
let git.res depend on GIT-PREFIX so that it gets recompiled when
compiling for a different architecture (this works because the exec path
changes based on the architecture: /mingw32/libexec/git-core for 32-bit
and /mingw64/libexec/git-core for 64-bit).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
git-gui tries to temporary set GIT_DIR for starting gitk and restore
it back after they are started. But in case of GIT_DIR which was not set
prior to invocation it is not unset after it. This affects commands
which can be later started from that git gui, for example "Git Bash".
Fix it.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like the workaround we added for t9116, t9001.83 hangs sometimes --
but not always! -- when being run in the Git for Windows SDK.
The issue seems to be related to redirection via a pipe, but it is really
hard to diagnose, what with git.exe (a non-MSYS2 program) calling a Perl
script (which is executed by an MSYS2 Perl), piping into another MSYS2
program.
As hunting time is scarce these days, simply work around this for now and
leave the real diagnosis and resolution for later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, UNC paths are a very convenient way to share data, and
alternates are all about sharing data.
We fixed a bug where alternates specifying UNC paths were not handled
properly, and it is high time that we add a regression test to ensure
that this bug is not reintroduced.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While it may seem super convenient to some old Unix hands to simpy
require Perl to be available when running the test suite, this is a
major hassle on Windows, where we want to verify that Perl is not,
actually, required in a NO_PERL build.
As a super ugly workaround, we "install" a script into /usr/bin/perl
reading like this:
#!/bin/sh
# We'd much rather avoid requiring Perl altogether when testing
# an installed Git. Oh well, that's why we cannot have nice
# things.
exec c:/git-sdk-64/usr/bin/perl.exe "$@"
The problem with that is that BusyBox assumes that the #! line in a
script refers to an executable, not to a script. So when it encounters
the line #!/usr/bin/perl in t5532's proxy-get-cmd, it barfs.
Let's help this situation by simply executing the Perl script with the
"interpreter" specified explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
