This works now that fast-export has been fixed to properly handle
refs that point to a commit that was not exported during the current
fast-export run.
This will be required by fast-export, when no commits were
exported, but the refs should be set, of course.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
When calling `git fast-export master..next` we want to export
refs/heads/next, but not refs/heads/master.
Currently this is not a problem, because negative refs' commits
are never shown. In the next commit this will be changed in order
to make sure that 'master..master' does export master. I.e. even
refs whose commits are not shown are exported.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
This will be required by fast-export, when no commits were
exported, but the refs should be set, of course.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
When calling `git fast-export a..a b` when a and b refer to the same
commit, nothing would be exported, and an incorrect reset line would
be printed for b ('from :0').
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
This happens only when the corresponding commits are not exported in
the current fast-export run. This can happen either when the relevant
commit is already marked, or when the commit is explicitly marked
as UNINTERESTING with a negative ref by another argument.
This breaks fast-export basec remote helpers.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Along the lines of 05d0e3b and f33946d, use cat instead of echo to avoid
line ending mismatches in the test result of "am empty-file does not
infloop" which make the test fail.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
On Windows XP (not Win7), directories cannot be deleted while a find handle
is open, causing "Deletion of directory '...' failed. Should I try again?"
prompts.
Prior to 19d1e75d "Win32: Unicode file name support (except dirent)",
these failures were silently ignored due to strbuf_free in is_dir_empty
resetting GetLastError to ERROR_SUCCESS.
Close the find handle in is_dir_empty so that git doesn't block deletion
of the directory even after all other applications have released it.
Reported-by: John Chen <john0312@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Fix Windows specific environment settings on startup rather than checking
for special values on every getenv call.
As a side effect, this makes the patched environment (i.e. with properly
initialized TMPDIR and TERM) available to child processes.
Signed-off-by: Karsten Blees <blees@dcon.de>
The Windows environment is sorted, keep it that way for O(log n)
environment access.
Change compareenv to compare only the keys, so that it can be used to
find an entry irrespective of the value.
Change lookupenv to binary seach for an entry. Return one's complement of
the insert position if not found (libc's bsearch returns NULL).
Replace MSVCRT's getenv with a minimal do_getenv based on the binary search
function.
Change do_putenv to insert new entries at the correct position. Simplify
the function by swapping if conditions and using memmove instead of for
loops.
Move qsort from make_environment_block to mingw_startup. We still need to
sort on startup to make sure that the environment is sorted according to
our compareenv function (while Win32 / CreateProcess requires the
environment block to be sorted case-insensitively, CreateProcess currently
doesn't enforce this, and some applications such as bash just don't care).
Note that environment functions are _not_ thread-safe and are not required
to be so by POSIX, the application is responsible for synchronizing access
to the environment. MSVCRT's getenv and our new getenv implementation are
better than that in that they are thread-safe with respect to other getenv
calls as long as the environment is not modified. Git's indiscriminate use
of getenv in background threads currently requires this property.
Signed-off-by: Karsten Blees <blees@dcon.de>
As of d41489a6 "Add more large blob test cases", git's high-level memory
allocation functions (xmalloc, xmemdupz etc.) access the environment to
simulate limited memory in tests (see 'getenv("GIT_ALLOC_LIMIT")' in
memory_limit_check()). These functions should not be used before the
environment is fully initialized (particularly not to initialize the
environment itself).
The current solution ('environ = NULL; ALLOC_GROW(environ...)') only works
because MSVCRT's getenv() reinitializes environ when it is NULL (i.e. it
leaves us with two sets of unusabe (non-UTF-8) and unfreeable (CRT-
allocated) environments).
Add our own set of malloc-or-die functions to be used in startup code.
Also check the result of __wgetmainargs, which may fail if there's not
enough memory for wide-char arguments and environment.
This patch is in preparation of the sorted environment feature, which
completely replaces MSVCRT's getenv() implementation.
Signed-off-by: Karsten Blees <blees@dcon.de>
Move environment array reallocation from do_putenv to the respective
callers. Keep track of the environment size in a global variable. Use
ALLOC_GROW in mingw_putenv to reduce reallocations. Allocate a
sufficiently sized environment array in make_environment_block to prevent
reallocations.
Signed-off-by: Karsten Blees <blees@dcon.de>
When spawning child processes via start_command(), the environment and all
environment entries are copied twice. First by make_augmented_environ /
copy_environ to merge with child_process.env. Then a second time by
make_environment_block to create a sorted environment block string as
required by CreateProcess.
Move the merge logic to make_environment_block so that we only need to copy
the environment once. This changes semantics of the env parameter: it now
expects a delta (such as child_process.env) rather than a full environment.
This is not a problem as the parameter is only used by start_command()
(all other callers previously passed char **environ, and now pass NULL).
The merge logic no longer xstrdup()s the environment strings, so do_putenv
must not free them. Add a parameter to distinguish this from normal putenv.
Remove the now unused make_augmented_environ / free_environ API.
Signed-off-by: Karsten Blees <blees@dcon.de>
Environment helper functions use random naming ('env' prefix or suffix or
both, with or without '_'). Change to POSIX naming scheme ('env' suffix,
no '_').
Env_setenv has more in common with putenv than setenv. Change to do_putenv.
Signed-off-by: Karsten Blees <blees@dcon.de>
Move environment helper functions up so that they can be reused by
mingw_getenv and mingw_spawnve_fd in subsequent patches.
Signed-off-by: Karsten Blees <blees@dcon.de>
The only public spawn function that needs to tweak the environment is
mingw_spawnvpe (called from start_command). Nevertheless, all internal
spawn* functions take an env parameter and needlessly pass the global
char **environ around. Remove the env parameter where it's not needed.
This removes the internal mingw_execve abstraction, which is no longer
needed.
Signed-off-by: Karsten Blees <blees@dcon.de>
The environment on Windows is case-insensitive. Some environment functions
(such as unsetenv and make_augmented_environ) have always used case-
sensitive comparisons instead, while others (getenv, putenv, sorting in
spawn*) were case-insensitive.
Prevent potential inconsistencies by using case-insensitive comparison in
lookup_env (used by putenv, unsetenv and make_augmented_environ).
Signed-off-by: Karsten Blees <blees@dcon.de>
All functions that modify the environment have memory leaks.
Disable gitunsetenv in the Makefile and use env_setenv (via mingw_putenv)
instead (this frees removed environment entries).
Move xstrdup from env_setenv to make_augmented_environ, so that
mingw_putenv no longer copies the environment entries (according to POSIX
[1], "the string [...] shall become part of the environment"). This also
fixes the memory leak in gitsetenv, which expects a POSIX compliant putenv.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/putenv.html
Note: This patch depends on taking control of char **environ and having
our own mingw_putenv (both introduced in "Win32: Unicode environment
(incoming)").
Signed-off-by: Karsten Blees <blees@dcon.de>
On Windows, all native APIs are Unicode-based. It is impossible to pass
legacy encoded byte arrays to a process via command line or environment
variables. Disable the tests that try to do so.
In t3901, most tests still work if we don't mess up the repository encoding
in setup, so don't switch to ISO-8859-1 on MinGW.
Note that i18n tests that do their encoding tricks via encoded files (such
as t3900) are not affected by this.
Signed-off-by: Karsten Blees <blees@dcon.de>
Convert environment from UTF-16 to UTF-8 on startup.
No changes to getenv() are necessary, as the MSVCRT version is implemented
on top of char **environ.
However, putenv / _wputenv from MSVCRT no longer work, for two reasons:
1. they try to keep environ, _wenviron and the Win32 process environment
in sync, using the default system encoding instead of UTF-8 to convert
between charsets
2. msysgit and MSVCRT use different allocators, memory allocated in git
cannot be freed by the CRT and vice versa
Implement mingw_putenv using the env_setenv helper function from the
environment merge code.
Note that in case of memory allocation failure, putenv now dies with error
message (due to xrealloc) instead of failing with ENOMEM. As git assumes
setenv / putenv to always succeed, this prevents it from continuing with
incorrect settings.
Signed-off-by: Karsten Blees <blees@dcon.de>
Use the same Unicode conversion functions for file names and console
conversions so that the file system and console output are in sync when
checking out legacy encoded repositories (i.e. with invalid UTF-8 file
names).
Signed-off-by: Karsten Blees <blees@dcon.de>
Assumes file names in git tree objects are UTF-8 encoded.
On most unix systems, the system encoding (and thus the TCL system
encoding) will be UTF-8, so file names will be displayed correctly.
On Windows, it is impossible to set the system encoding to UTF-8. Changing
the TCL system encoding (via 'encoding system ...', e.g. in the startup
code) is explicitly discouraged by the TCL docs.
Change gitk and git-gui functions dealing with file names to always convert
from and to UTF-8.
Signed-off-by: Karsten Blees <blees@dcon.de>
Changes opendir/readdir to use Windows Unicode APIs and convert between
UTF-8/UTF-16.
Removes parameter checks that are already covered by xutftowcs_path. This
changes detection of ENAMETOOLONG from MAX_PATH - 2 to MAX_PATH (matching
is_dir_empty in mingw.c). If name + "/*" or the resulting absolute path is
too long, FindFirstFile fails and errno is set through err_win_to_posix.
Increases the size of dirent.d_name to accommodate the full
WIN32_FIND_DATA.cFileName converted to UTF-8 (UTF-16 to UTF-8 conversion
may grow by factor three in the worst case).
Signed-off-by: Karsten Blees <blees@dcon.de>
Replaces Windows "ANSI" APIs dealing with file- or path names with their
Unicode equivalent, adding UTF-8/UTF-16LE conversion as necessary.
The dirent API (opendir/readdir/closedir) is updated in a separate commit.
Adds trivial wrappers for access, chmod and chdir.
Adds wrapper for mktemp (needed for both mkstemp and mkdtemp).
The simplest way to convert a repository with legacy-encoded (e.g. Cp1252)
file names to UTF-8 ist to checkout with an old msysgit version and
"git add --all & git commit" with the new version.
Signed-off-by: Karsten Blees <blees@dcon.de>
Add Unicode conversion functions to convert between Windows native UTF-16LE
encoding to UTF-8 and back.
To support repositories with legacy-encoded file names, the UTF-8 to UTF-16
conversion function tries to create valid, unique file names even for
invalid UTF-8 byte sequences, so that these repositories can be checked out
without error.
The current implementation leaves invalid UTF-8 bytes in range 0xa0 - 0xff
as is (producing printable Unicode chars \u00a0 - \u00ff, equivalent to
ISO-8859-1), and converts 0x80 - 0x9f to hex-code (\u0080 - \u009f are
control chars).
The Windows MultiByteToWideChar API was not used as it either drops invalid
UTF-8 sequences (on Win2k/XP; producing non-unique or even empty file
names) or converts them to the replacement char \ufffd (Vista/7; causing
ERROR_INVALID_NAME in subsequent calls to file system APIs).
Signed-off-by: Karsten Blees <blees@dcon.de>
Winansi.c has many static variables that are accessed and modified from
the [v][f]printf / fputs functions overridden in the file. This may cause
multi threaded git commands that print to the console to produce corrupted
output or even crash.
Additionally, winansi.c doesn't override all functions that can be used to
print to the console (e.g. fwrite, write, fputc are missing), so that ANSI
escapes don't work properly for some git commands (e.g. git-grep).
Instead of doing ANSI emulation in just a few wrapped functions on top of
the IO API, let's plug into the IO system and take advantage of the thread
safety inherent to the IO system.
Redirect stdout and stderr to a pipe if they point to the console. A
background thread reads from the pipe, handles ANSI escape sequences and
UTF-8 to UTF-16 conversion, then writes to the console.
The pipe-based stdout and stderr replacements must be set to unbuffered, as
MSVCRT doesn't support line buffering and fully buffered streams are
inappropriate for console output.
Due to the byte-oriented pipe, ANSI escape sequences and multi-byte UTF-8
sequences can no longer be expected to arrive in one piece. Replace the
string-based ansi_emulate() with a simple stateful parser (this also fixes
colored diff hunk headers, which were broken as of commit 2efcc977).
Override isatty to return true for the pipes redirecting to the console.
Exec/spawn obtain the original console handle to pass to the next process
via winansi_get_osfhandle().
All other overrides are gone, the default stdio implementations work as
expected with the piped stdout/stderr descriptors.
Global variables are either initialized on startup (single threaded) or
exclusively modified by the background thread. Threads communicate through
the pipe, no further synchronization is necessary.
The background thread is terminated by disonnecting the pipe after flushing
the stdio and pipe buffers. This doesn't work for anonymous pipes (created
via CreatePipe), as DisconnectNamedPipe only works on the read end, which
discards remaining data. Thus we have to setup the pipe manually, with the
write end beeing the server (opened with CreateNamedPipe) and the read end
the client (opened with CreateFile).
Limitations: doesn't track reopened or duped file descriptors, i.e.:
- fdopen(1/2) returns fully buffered streams
- dup(1/2), dup2(1/2) returns normal pipe descriptors (i.e. isatty() =
false, winansi_get_osfhandle won't return the original console handle)
Currently, only the git-format-patch command uses xfdopen(xdup(1)) (see
"realstdout" in builtin/log.c), but works well with these limitations.
Many thanks to Atsushi Nakagawa <atnak@chejz.com> for suggesting and
reviewing the thread-exit-mechanism.
Signed-off-by: Karsten Blees <blees@dcon.de>
This reverts commit df599e9612.
As of 5e9637c6 "i18n: add infrastructure for translating Git with gettext",
eval_gettext uses MinGW envsubst.exe instead of git-sh-i18n--envsubst.exe
for variable substitution. This breaks git-submodule.sh messages and tests,
as envsubst.exe doesn't support case-sensitive environment lookup (the same
is true for almost everything on Windows, including MSys and Cygwin tools).
30a615ac "Windows/i18n: rename $path to prevent clashes with $PATH" renames
the conflicting variable in git-submodule.sh, so that it works on Windows
(i.e. with case-insensitive environment, regardless of the toolset).
Revert to the documented behaviour of case-insensitive environment on
Windows.
Signed-off-by: Karsten Blees <blees@dcon.de>
Decode file names from system encoding in all diff hunk header lines, not
just the first (i.e. print nice file names in 'rename from' / 'rename to' /
'Binary files' lines, too).
Signed-off-by: Karsten Blees <blees@dcon.de>
Assume git tree objects (i.e. output of git-ls-tree) are encoded in system
encoding, for display in the git-gui file browser.
Signed-off-by: Karsten Blees <blees@dcon.de>
Environment variables on Windows are case-insensitive. Rename '$path' in
all calls to eval_gettext to $modulepath so that it is not mistakenly
expanded to the value of the $PATH variable.
[jes: this happens to fix t7406/t7407 on Windows]
[pt: squashed in fix for substitution order error that broke t7400]
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
The dreaded "your vnsprintf is broken (returned -1)" error is back. At
least with the libintl version we have. So for the moment, just work
around the issue by _not_ using gettext.
Ah, I wish that my attempt at implementing a custom strbuf_vaddf() would
not have been brushed aside so rashly. Oh well. Time saved on maintaining
that thing, I guess (although more time went into working around coping
with existing implementations).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We are building libiconv now the same way as upstream MinGW does, so we do
not need OLD_ICONV anymore when compiling Git either in msysGit or
mingwGitDevEnv.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
GetCurrentConsoleFontEx in an atexit routine doesn't work because git
closes stdout before exit (which also closes the console handle). Check
the console font when we first encounter a non-ascii character and only
schedule the warning message to be printed at exit (warnings go to stderr,
which is not closed by git).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Some constants (such as LF_FACESIZE) are undefined with -DNOGDI (set in the
Makefile), and CONSOLE_FONT_INFOEX is available in MSVC, but not in MinGW.
Cast FARPROC to PGETCURRENTCONSOLEFONTEX to suppress MSVC compiler warning.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This seems to be related to the poll-emulation... I see that these things
are guarded by an "#if(_WIN32_WINNT >= 0x0600)" in <winsock2.h>, which
means it's supported for Windows Vista and above... We still support
Windows XP, so it seems someone has set this too high :)
I'd prefer to set this from the Makefile, but this generates a warning in
compat/win32/poll.c about redefining a macro (poll.c wants it to be 0x502,
which is Windows XP with SP2, rather than 0x501 which is normal Windows
XP).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
8fb3ad76 (fast-import: prevent producing bad delta) introduced the first
use of S_ISUID. Since before this commit the value was irrelevant, we had
only a dummy definition in mingw.h. But beginning with this commit the
macro must expand to a reasonable value. Make it so.
We do not change S_ISGID from the value 0 because it is used in path.c
(via FORCE_DIR_SET_GID) to set the mode on directories in a manner that
is not supported on Windows, and 0 is the right value in this case.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
