The RUNTIME_PREFIX mechanism allows us to use the default (absolute) paths
on Windows too. Defining RUNTIME_PREFIX explicitly requests for
translation of paths during runtime, depending on the path to the
executable.
This commit modifies system_path() to compute the prefix at runtime if
configured to do so. If RUNTIME_PREFIX is defined, system_path() tries
to strip known directories that executables can be located in from the
path of the executable. If the path is successfully stripped it is used
as the prefix. For example, if the executable is "/msysgit/bin/git" and
BINDIR is "/bin", then the prefix is computed as "/msysgit".
We report an error if the runtime prefix computation fails, which can
happen if the executable is not installed at a known location. The user
should know that the global configuration is not picked up, because this
can cause unexpected behavior. If we explicitly want to ignore system
wide paths, we can set the environment variable GIT_CONFIG_NOSYSTEM, as
our tests do.
The implementation requires that argv0_path is set up properly, which is
currently the case only on Windows. argv0_path must point to the
absolute path of the directory of the executable, which is verified by
two calls to assert(). On Windows, the wrapper for main() (see
compat/mingw.h) guarantees that this is the case. On Unix, further work
is required before RUNTIME_PREFIX can be enabled.
MSYS' automatic path conversion causes problems when passing paths as
defines ('-D' arguments to the compiler). MSYS tries to be smart and
converts absolute paths to native Windows paths, e.g. if MSYS sees
"/bin" it converts it to "c:/msysgit/bin". But we want completely
unmodified paths; e.g. if we set bindir in the Makefile to "/bin", the
define BINDIR shall expand to "/bin". Conversion to absolute Windows
path will takes place later, during runtime.
This commit adds a workaround by replacing "/" with its octal
representation "\057", effectively hiding the path from MSYS' path
conversion mechanism. MSYS does no longer see the absolute path and
therefore leaves it alone.
Commit 3632cfc24 makes the same change for Darwin; however, the problem
also exists on FreeBSD.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This augments 3632cfc24 (Use compatibility regex library on Darwin,
2008-09-07), which already carries a "Tested-by" statement for AIX,
but that test was actually done with this patch included.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Tested-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard libc regex library on OSX does not support alternation
in POSIX Basic Regular Expression mode. This breaks the diff.funcname
functionality on OSX.
To fix this, we use the GNU regex library which is already present in
the compat/ diretory for the MinGW port. However, simply adding compat/
to the COMPAT_CFLAGS variable causes a conflict between the system
fnmatch.h and the one present in compat/. To remedy this, move the
regex and fnmatch functionality to their own subdirectories in compat/
so they can be included seperately.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Tested-by: Mike Ralphson <mike@abacus.co.uk> (AIX)
Tested-by: Johannes Sixt <johannes.sixt@telecom.at> (MinGW)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When modifying merge-recursive.h, for example builtin-merge-recursive.c
have to be recompiled which was not true till now, causing various
runtime errors using an incremental build.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Playing with linker games to shrink git-shell did not go well with various
other platforms and compilers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code failed to filter-out git-add properly on platforms were $X is
not empty (ATM there is only one such a platform).
Than it tried to create a hardlink to the file ($execdir/git-add) it just
removed (because git-add is first in the BUILT_INS), so ln failed (but
because stderr was redirected into /dev/null the error was never seen), and
the whole install ended up using "ln -s" instead.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We make hardlinks from "git" to "git-<cmd>" built-ins and have been
careful to avoid cross-device links when linking "git-<cmd>" to
gitexecdir.
However, we were not prepared to deal with a build directory that is
incapable of making hard links within itself. This patch corrects it.
Instead of temporarily linking "git" to gitexecdir, directly link "git-
add", falling back to "cp". Try hardlinking that as "git-<cmd>", falling
back to symlinks or "cp" on error.
While at it, avoid 100+ error messages from hardlink failures when we are
going to fall back to symlinks or "cp" by redirecting the standard error
to /dev/null.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 81cc66a, customization has been added to Makefile for supporting
HP-UX, but git commit is still problematic. This should fix the issue.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Acked-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On platforms with $X, make removes any leftover scripts 'a' from
earlier builds if a new binary 'a.exe' is now built. However, on
cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file.
Test for file equality before attempting a remove, in order to avoid
nuking just-built binaries.
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a make target which can be used to try to execute certain shell
constructs which are required for compiling and running git.
This patch provides a test for the $() notation for command substition
which is used in the Makefile and extensively in the git scripts.
The make target is named in such a way as to be a hint to the user that
SHELL_PATH should be set to an appropriate shell. If the shell command
fails, the user should receive a message similar to the following:
make: *** [please_set_SHELL_PATH_to_a_more_modern_shell] Error 2
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier commit c70a8d9 (Makefile: Do not install a copy of 'git' in
$(gitexecdir), 2008-07-21), we tried to avoid installing two git, one in
/usr/bin/git and the other in /usr/libexec/git-core/git. It mistakenly
removed the only copy of git when gitexecdir and bindir are set to the
same directory, i.e. the traditional layout.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a follow-up patch to 49fa65a (Allow the built-in exec path to be
relative to the command invocation path, 2008-07-23). Without specific
gitexecdir passed from the command line, git-gui's build procedure would
try to figure out the value for it by running an installed git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_EXEC_PATH (the macro that is defined in the Makefile) is relative,
it is interpreted relative to the command's invocation path, which usually
is $(bindir).
The Makefile rules were written with the assumption that $(gitexecdir) is
an absolute path. We introduce a separate variable that names the
(absolute) installation directory.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$(gitexecdir) (as defined in the Makefile) has gained another path
component, but the relative paths in the MINGW section of the Makefile,
which are interpreted relative to it, do not account for it.
Instead of adding another ../ in front of the path, we change the code that
constructs the absolute paths to do it relative to the command's directory,
which is essentially $(bindir). We do it this way because we will also
allow a relative $(gitexecdir) later.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target needs to check whether the user has opted to make
$(gitexecdir) equal to $(bindir). It did so by a straight string
comparison. Since we are going to allow a relative $(gitexecdir), we have
to normalize paths before comparison, which we do with $(cd there && pwd).
The normalized paths are stored in shell variables. These we can now
reuse in the subsequent install statements, which conveniently shortens
the lines a bit.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is already a copy in $(bindir). A subsequent patch will enable git
to derive the exec-path from its invocation path. If git is invoked
recursively, the first invocation puts the exec-path into PATH, so that
the recursive invocation would find the instance in the exec-path. This
second instance would again try to derive an exec-path from its invocation
path, but would base its result on the wrong "bindir".
We do install the copy of git first, but remove it later, so that we can
use it as the source of the hardlinks for the builtins.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
launch_editor() is declared in strbuf.h but defined in builtin-tag.c.
This patch moves launch_editor() into a new source file editor.c,
but keeps the declaration in strbuf.h.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile records paths to a few programs in GIT-BUILD-OPTIONS file. These
paths need to be quoted twice: once to protect specials from the shell
that runs the generated GIT-BUILD-OPTIONS file, and again to protect them
(and the first level of quoting itself) from the shell that runs the
"echo" inside the Makefile.
You can test this by trying:
$ ln -s /bin/tar "$HOME/Tes' program/tar"
$ make TAR="$HOME/Tes' program/tar" test
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This in the short term will break on platforms that use compat implemenations
that call outside compat layer, but that is exactly what we want. To give
incentive to fix things for people who are affected and more importantly have
environment to test their fixes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds only the minimum necessary to keep git pull/merge's diffstat from
wrapping. Notably absent is support for the K (erase) operation, and support
for POSIX write.
Signed-off-by: Peter Harris <git@peter.is-a-geek.org>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5b8e6f85 introduced stubs for three functions that make no sense
for git-shell. But those stubs defined libgit.a functions a second time
so that a linker can complain.
Now git-shell is only linked to a subset of libgit.a.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/dashless:
make remove-dashes: apply to scripts and programs as well, not just to builtins
git-bisect: use dash-less form on git bisect log
t1007-hash-object.sh: use quotes for the test description
t0001-init.sh: change confusing directory name
* mv/merge-in-c:
reduce_heads(): protect from duplicate input
reduce_heads(): thinkofix
Add a new test for git-merge-resolve
t6021: add a new test for git-merge-resolve
Teach merge.log to "git-merge" again
Build in merge
Fix t7601-merge-pull-config.sh on AIX
git-commit-tree: make it usable from other builtins
Add new test case to ensure git-merge prepends the custom merge message
Add new test case to ensure git-merge reduces octopus parents when possible
Introduce reduce_heads()
Introduce get_merge_bases_many()
Add new test to ensure git-merge handles more than 25 refs.
Introduce get_octopus_merge_bases() in commit.c
git-fmt-merge-msg: make it usable from other builtins
Move read_cache_unmerged() to read-cache.c
Add new test to ensure git-merge handles pull.twohead and pull.octopus
Move parse-options's skip_prefix() to git-compat-util.h
Move commit_list_count() to commit.c
Move split_cmdline() to alias.c
Conflicts:
Makefile
parse-options.c
The "dash-less" change aims to remove git commands from $PATH. It does so
by defining a GIT_EXEC_PATH that is different from $(bindir). On Windows
we want a relocatable installation of the git tool, so we cannot use an
absolute GIT_EXEC_PATH. Therefore, the implementation of
builtin_exec_path() on Windows derives the exec-path from the command
invocation, and disregards GIT_EXEC_PATH. But this broke when
$(gitexecdir) became different from $(bindir), so we restore the earlier
behavior here.
This counteracts the aims of the "dash-less" change on Windows, but better
this way than having no working git at all.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
All programs and scripts are now moved outside PATH, so it's a good idea
not to use the dashed forms for them, either.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves rerere()-related functions into a newly created
rerere.c file.
The setup_rerere() function is needed by both rerere() and cmd_rerere(),
so this function is moved to rerere.c and declared non-static (and "extern")
in newly created rerere.h file.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds only the minimum necessary to keep git pull/merge's diffstat from
wrapping. Notably absent is support for the K (erase) operation, and support
for POSIX write.
Signed-off-by: Peter Harris <git@peter.is-a-geek.org>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
