Git for Windows supports the core.longPaths config setting to allow
writing/reading long paths via the \\?\ trick for a long time now.
However, for that support to work, it is absolutely necessary that
git_default_config() is given a chance to parse the config. Otherwise
Git will be non the wiser.
So let's make sure that as many commands that previously failed to
parse the core.* settings now do that, implicitly enabling long path
support in a lot more places.
Note: this is not a perfect solution, and it cannot be, as there is
a chicken-and-egg problem in reading the config itself...
This fixes https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the branch thicket of patches in Git for Windows that are
considered ready for upstream. To keep them in a ready-to-submit shape,
they are kept as close to the beginning of the branch thicket as
possible.
Teach "add" to use preload-index and fscache features
to improve performance on very large repositories.
During an "add", a call is made to run_diff_files()
which calls check_remove() for each index-entry. This
calls lstat(). On Windows, the fscache code intercepts
the lstat() calls and builds a private cache using the
FindFirst/FindNext routines, which are much faster.
Somewhat independent of this, is the preload-index code
which distributes some of the start-up costs across
multiple threads.
We need to keep the call to read_cache() before parsing the
pathspecs (and hence cannot use the pathspecs to limit any preload)
because parse_pathspec() is using the index to determine whether a
pathspec is, in fact, in a submodule. If we would not read the index
first, parse_pathspec() would not error out on a path that is inside
a submodule, and t7400-submodule-basic.sh would fail with
not ok 47 - do not add files from a submodule
We still want the nice preload performance boost, though, so we simply
call read_cache_preload(&pathspecs) after parsing the pathspecs.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A ton of Git commands simply do not read (or at least parse) the core.*
settings. This is not good, as Git for Windows relies on the
core.longPaths setting to be read quite early on.
So let's just make sure that all commands read the config and give
platform_core_config() a chance.
This patch teaches tons of Git commands to respect the config setting
`core.longPaths = true`, including `pack-refs`, thereby fixing
https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The CreateProcessW() function does not really support spaces in its
first argument, lpApplicationName. But it supports passing NULL as
lpApplicationName, which makes it figure out the application from the
(possibly quoted) first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
This fixes https://github.com/git-for-windows/git/issue/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In particular on Windows, where the default maximum path length is quite
small, but there are ways to circumvent that limit in many cases, it is
very important that users be given an indication why their command
failed because of too long paths when it did.
This test case makes sure that a warning is issued that would have
helped the user who reported Git for Windows' issue 521:
https://github.com/git-for-windows/git/issues/521
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Helped-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With Windows 10 Build 14972 in Developer Mode, a new flag is supported
by CreateSymbolicLink() to create symbolic links even when running
outside of an elevated session (which was previously required).
This new flag is called SYMBOLIC_LINK_FLAG_ALLOW_UNPRIVILEGED_CREATE and
has the numeric value 0x02.
Previous Windows 10 versions will not understand that flag and return an
ERROR_INVALID_PARAMETER, therefore we have to be careful to try passing
that flag only when the build number indicates that it is supported.
For more information about the new flag, see this blog post:
https://blogs.windows.com/buildingapps/2016/12/02/symlinks-windows-10/
This patch is loosely based on the patch submitted by Samuel D. Leslie
as https://github.com/git-for-windows/git/pull/1184.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Symlinks on Windows have a flag that indicates whether the target is a file
or a directory. Symlinks of wrong type simply don't work. This even affects
core Win32 APIs (e.g. DeleteFile() refuses to delete directory symlinks).
However, CreateFile() with FILE_FLAG_BACKUP_SEMANTICS doesn't seem to care.
Check the target type by first creating a tentative file symlink, opening
it, and checking the type of the resulting handle. If it is a directory,
recreate the symlink with the directory flag set.
It is possible to create symlinks before the target exists (or in case of
symlinks to symlinks: before the target type is known). If this happens,
create a tentative file symlink and postpone the directory decision: keep
a list of phantom symlinks to be processed whenever a new directory is
created in mingw_mkdir().
Limitations: This algorithm may fail if a link target changes from file to
directory or vice versa, or if the target directory is created in another
process.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement symlink() that always creates file symlinks. Fails with ENOSYS
if symlinks are disabled or unsupported.
Note: CreateSymbolicLinkW() was introduced with symlink support in Windows
Vista. For compatibility with Windows XP, we need to load it dynamically
and fail gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
Implement readlink() by reading NTFS reparse points. Works for symlinks
and directory junctions. If symlinks are disabled, fail with ENOSYS.
Signed-off-by: Karsten Blees <blees@dcon.de>
If symlinks are enabled, resolve all symlinks when changing directories,
as required by POSIX.
Note: Git's real_path() function bases its link resolution algorithm on
this property of chdir(). Unfortunately, the current directory on Windows
is limited to only MAX_PATH (260) characters. Therefore using symlinks and
long paths in combination may be problematic.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSVCRT's _wrename() cannot rename symlinks over existing files: it returns
success without doing anything. Newer MSVCR*.dll versions probably do not
have this problem: according to CRT sources, they just call MoveFileEx()
with the MOVEFILE_COPY_ALLOWED flag.
Get rid of _wrename() and call MoveFileEx() with proper error handling.
Signed-off-by: Karsten Blees <blees@dcon.de>
_wunlink() / DeleteFileW() refuses to delete symlinks to directories. If
_wunlink() fails with ERROR_ACCESS_DENIED, try _wrmdir() as well.
Signed-off-by: Karsten Blees <blees@dcon.de>
Symlinks on Windows don't work the same way as on Unix systems. E.g. there
are different types of symlinks for directories and files, creating
symlinks requires administrative privileges etc.
By default, disable symlink support on Windows. I.e. users explicitly have
to enable it with 'git config [--system|--global] core.symlinks true'.
The test suite ignores system / global config files. Allow testing *with*
symlink support by checking if native symlinks are enabled in MSys2 (via
'MSYS=winsymlinks:nativestrict').
Reminder: This would need to be changed if / when we find a way to run the
test suite in a non-MSys-based shell (e.g. dash).
Signed-off-by: Karsten Blees <blees@dcon.de>
The retry pattern is duplicated in three places. It also seems to be too
hard to use: mingw_unlink() and mingw_rmdir() duplicate the code to retry,
and both of them do so incompletely. They also do not restore errno if the
user answers 'no'.
Introduce a retry_ask_yes_no() helper function that handles retry with
small delay, asking the user, and restoring errno.
mingw_unlink: include _wchmod in the retry loop (which may fail if the
file is locked exclusively).
mingw_rmdir: include special error handling in the retry loop.
Signed-off-by: Karsten Blees <blees@dcon.de>
Git typically doesn't trust the stat.st_size member of symlinks (e.g. see
strbuf_readlink()). However, some functions take shortcuts if st_size is 0
(e.g. diff_populate_filespec()).
In mingw_lstat() and fscache_lstat(), make sure to return an adequate size.
The extra overhead of opening and reading the reparse point to calculate
the exact size is not necessary, as git doesn't rely on the value anyway.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Move S_IFLNK detection to file_attr_to_st_mode() and reuse it in fscache.
Implement DT_LNK detection in dirent.c and the fscache readdir version.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When obtaining lstat information for reparse points, we need to call
FindFirstFile() in addition to GetFileInformationEx() to obtain the type
of the reparse point (symlink, mount point etc.). However, currently there
is no error handling whatsoever if FindFirstFile() fails.
Call FindFirstFile() before modifying the stat *buf output parameter and
error out if the call fails.
Note: The FindFirstFile() return value includes all the data that we get
from GetFileAttributesEx(), so we could replace GetFileAttributesEx() with
FindFirstFile(). We don't do that because GetFileAttributesEx() is about
twice as fast for single files. I.e. we only pay the extra cost of calling
FindFirstFile() in the rare case that we encounter a reparse point.
Note: The indentation of the remaining reparse point code will be fixed in
the next patch.
Signed-off-by: Karsten Blees <blees@dcon.de>
With the new mingw_stat() implementation, do_lstat() is only called from
mingw_lstat() (with follow == 0). Remove the extra function and the old
mingw_stat()-specific (follow == 1) logic.
Signed-off-by: Karsten Blees <blees@dcon.de>
With respect to symlinks, the current stat() implementation is almost the
same as lstat(): except for the file type (st_mode & S_IFMT), it returns
information about the link rather than the target.
Implement stat by opening the file with as little permissions as possible
and calling GetFileInformationByHandle on it. This way, all link resoltion
is handled by the Windows file system layer.
If symlinks are disabled, use lstat() as before, but fail with ELOOP if a
symlink would have to be resolved.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
GetFileAttributes cannot handle paths with trailing dir separator. The
current [l]stat implementation calls GetFileAttributes twice if the path
has trailing slashes (first with the original path passed to [l]stat, and
and a second time with a path copy with trailing '/' removed).
With Unicode conversion, we get the length of the path for free and also
have a (wide char) buffer that can be modified.
Remove trailing directory separators before calling the Win32 API.
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() refuses to read link targets that exceed PATH_MAX (even
if a sufficient size was specified by the caller).
As some platforms support longer paths, remove this restriction (similar
to strbuf_getcwd()).
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() calls readlink() twice if the hint argument specifies the
exact size of the link target (e.g. by passing stat.st_size as returned by
lstat()). This is necessary because 'readlink(..., hint) == hint' could
mean that the buffer was too small.
Use hint + 1 as buffer size to prevent this.
Signed-off-by: Karsten Blees <blees@dcon.de>
These patches are probably no longer necessary. Make sure before
dropping them, though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
