This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows supports the core.longPaths config setting to allow
writing/reading long paths via the \\?\ trick for a long time now.
However, for that support to work, it is absolutely necessary that
git_default_config() is given a chance to parse the config. Otherwise
Git will be non the wiser.
So let's make sure that as many commands that previously failed to
parse the core.* settings now do that, implicitly enabling long path
support in a lot more places.
Note: this is not a perfect solution, and it cannot be, as there is
a chicken-and-egg problem in reading the config itself...
This fixes https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These are Git for Windows' Git GUI and gitk patches. We will have to
decide at some point what to do about them, but that's a little lower
priority (as Git GUI seems to be unmaintained for the time being, and
the gitk maintainer keeps a very low profile on the Git mailing list,
too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is the branch thicket of patches in Git for Windows that are
considered ready for upstream. To keep them in a ready-to-submit shape,
they are kept as close to the beginning of the branch thicket as
possible.
... even if they may look like them.
As looking up the target of the "symbolic link" (just to see whether it
starts with `/ContainerMappedDirectories/`) is pretty expensive, we
do it when we can be *really* sure that there is a possibility that this
might be the case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
In preparation for making this function a bit more complicated (to allow
for special-casing the `ContainerMappedDirectories` in Windows
containers, which look like a symbolic link, but are not), let's move it
out of the header.
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It is a known issue that a rename() can fail with an "Access denied"
error at times, when copying followed by deleting the original file
works. Let's just fall back to that behavior.
Signed-off-by: JiSeop Moon <zcube@zcube.kr>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On file systems that support it, this can dramatically speed up operations
like add, commit, describe, rebase, reset, rm that would otherwise have to
lstat() every file to "re-match" the stat information in the index to that
of the file system.
On a synthetic repo with 1M files, "git reset" dropped from 52.02 seconds to
14.42 seconds for a savings of 72%.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
This is retry of #1419.
I added flush_fscache macro to flush cached stats after disk writing
with tests for regression reported in #1438 and #1442.
git checkout checks each file path in sorted order, so cache flushing does not
make performance worse unless we have large number of modified files in
a directory containing many files.
Using chromium repository, I tested `git checkout .` performance when I
delete 10 files in different directories.
With this patch:
TotalSeconds: 4.307272
TotalSeconds: 4.4863595
TotalSeconds: 4.2975562
Avg: 4.36372923333333
Without this patch:
TotalSeconds: 20.9705431
TotalSeconds: 22.4867685
TotalSeconds: 18.8968292
Avg: 20.7847136
I confirmed this patch passed all tests in t/ with core_fscache=1.
Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When I do git fetch, git call file stats under .git/objects for each
refs. This takes time when there are many refs.
By enabling fscache, git takes file stats by directory traversing and that
improved the speed of fetch-pack for repository having large number of
refs.
In my windows workstation, this improves the time of `git fetch` for
chromium repository like below. I took stats 3 times.
* With this patch
TotalSeconds: 9.9825165
TotalSeconds: 9.1862075
TotalSeconds: 10.1956256
Avg: 9.78811653333333
* Without this patch
TotalSeconds: 15.8406702
TotalSeconds: 15.6248053
TotalSeconds: 15.2085938
Avg: 15.5580231
Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
Fix regression described in:
https://github.com/git-for-windows/git/issues/1392
which was introduced in:
b2353379bb
Problem Symptoms
================
When the user has a .gitignore file that is a symlink, the fscache
optimization introduced above caused the stat-data from the symlink,
rather that of the target file, to be returned. Later when the ignore
file was read, the buffer length did not match the stat.st_size field
and we called die("cannot use <path> as an exclude file")
Optimization Rationale
======================
The above optimization calls lstat() before open() primarily to ask
fscache if the file exists. It gets the current stat-data as a side
effect essentially for free (since we already have it in memory).
If the file does not exist, it does not need to call open(). And
since very few directories have .gitignore files, we can greatly
reduce time spent in the filesystem.
Discussion of Fix
=================
The above optimization calls lstat() rather than stat() because the
fscache only intercepts lstat() calls. Calls to stat() stay directed
to the mingw_stat() completly bypassing fscache. Furthermore, calls
to mingw_stat() always call {open, fstat, close} so that symlinks are
properly dereferenced, which adds *additional* open/close calls on top
of what the original code in dir.c is doing.
Since the problem only manifests for symlinks, we add code to overwrite
the stat-data when the path is a symlink. This preserves the effect of
the performance gains provided by the fscache in the normal case.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach "add" to use preload-index and fscache features
to improve performance on very large repositories.
During an "add", a call is made to run_diff_files()
which calls check_remove() for each index-entry. This
calls lstat(). On Windows, the fscache code intercepts
the lstat() calls and builds a private cache using the
FindFirst/FindNext routines, which are much faster.
Somewhat independent of this, is the preload-index code
which distributes some of the start-up costs across
multiple threads.
We need to keep the call to read_cache() before parsing the
pathspecs (and hence cannot use the pathspecs to limit any preload)
because parse_pathspec() is using the index to determine whether a
pathspec is, in fact, in a submodule. If we would not read the index
first, parse_pathspec() would not error out on a path that is inside
a submodule, and t7400-submodule-basic.sh would fail with
not ok 47 - do not add files from a submodule
We still want the nice preload performance boost, though, so we simply
call read_cache_preload(&pathspecs) after parsing the pathspecs.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Make fscache_enabled() function public rather than static.
Remove unneeded fscache_is_enabled() function.
Change is_fscache_enabled() macro to call fscache_enabled().
is_fscache_enabled() now takes a pathname so that the answer
is more precise and mean "is fscache enabled for this pathname",
since fscache only stores repo-relative paths and not absolute
paths, we can avoid attempting lookups for absolute paths.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
The purpose of this function is to stat() the files listed in the index
in a multi-threaded fashion. It is called directly after reading the
index in the read_index_preloaded() function.
However, in some cases we may want to separate the index reading from
the preloading step, e.g. in builtin/add.c, where we need to load the
index before we parse the pathspecs (which needs to error out if one of
the pathspecs refers to a path within a submodule, for which the index
must have been read already), and only then will we want to preload,
possibly limited by the just-parsed pathspecs.
So let's just export that function to allow calling it separately.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach read_directory_recursive() and add_excludes() to
be aware of optional fscache and avoid trying to open()
and fstat() non-existant ".gitignore" files in every
directory in the worktree.
The current code in add_excludes() calls open() and then
fstat() for a ".gitignore" file in each directory present
in the worktree. Change that when fscache is enabled to
call lstat() first and if present, call open().
This seems backwards because both lstat needs to do more
work than fstat. But when fscache is enabled, fscache will
already know if the .gitignore file exists and can completely
avoid the IO calls. This works because of the lstat diversion
to mingw_lstat when fscache is enabled.
This reduced status times on a 350K file enlistment of the
Windows repo on a NVMe SSD by 0.25 seconds.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
A ton of Git commands simply do not read (or at least parse) the core.*
settings. This is not good, as Git for Windows relies on the
core.longPaths setting to be read quite early on.
So let's just make sure that all commands read the config and give
platform_core_config() a chance.
This patch teaches tons of Git commands to respect the config setting
`core.longPaths = true`, including `pack-refs`, thereby fixing
https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The CreateProcessW() function does not really support spaces in its
first argument, lpApplicationName. But it supports passing NULL as
lpApplicationName, which makes it figure out the application from the
(possibly quoted) first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
This fixes https://github.com/git-for-windows/git/issue/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With Windows 10 Build 14972 in Developer Mode, a new flag is supported
by CreateSymbolicLink() to create symbolic links even when running
outside of an elevated session (which was previously required).
This new flag is called SYMBOLIC_LINK_FLAG_ALLOW_UNPRIVILEGED_CREATE and
has the numeric value 0x02.
Previous Windows 10 versions will not understand that flag and return an
ERROR_INVALID_PARAMETER, therefore we have to be careful to try passing
that flag only when the build number indicates that it is supported.
For more information about the new flag, see this blog post:
https://blogs.windows.com/buildingapps/2016/12/02/symlinks-windows-10/
This patch is loosely based on the patch submitted by Samuel D. Leslie
as https://github.com/git-for-windows/git/pull/1184.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Symlinks on Windows have a flag that indicates whether the target is a file
or a directory. Symlinks of wrong type simply don't work. This even affects
core Win32 APIs (e.g. DeleteFile() refuses to delete directory symlinks).
However, CreateFile() with FILE_FLAG_BACKUP_SEMANTICS doesn't seem to care.
Check the target type by first creating a tentative file symlink, opening
it, and checking the type of the resulting handle. If it is a directory,
recreate the symlink with the directory flag set.
It is possible to create symlinks before the target exists (or in case of
symlinks to symlinks: before the target type is known). If this happens,
create a tentative file symlink and postpone the directory decision: keep
a list of phantom symlinks to be processed whenever a new directory is
created in mingw_mkdir().
Limitations: This algorithm may fail if a link target changes from file to
directory or vice versa, or if the target directory is created in another
process.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement symlink() that always creates file symlinks. Fails with ENOSYS
if symlinks are disabled or unsupported.
Note: CreateSymbolicLinkW() was introduced with symlink support in Windows
Vista. For compatibility with Windows XP, we need to load it dynamically
and fail gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
Implement readlink() by reading NTFS reparse points. Works for symlinks
and directory junctions. If symlinks are disabled, fail with ENOSYS.
Signed-off-by: Karsten Blees <blees@dcon.de>
If symlinks are enabled, resolve all symlinks when changing directories,
as required by POSIX.
Note: Git's real_path() function bases its link resolution algorithm on
this property of chdir(). Unfortunately, the current directory on Windows
is limited to only MAX_PATH (260) characters. Therefore using symlinks and
long paths in combination may be problematic.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSVCRT's _wrename() cannot rename symlinks over existing files: it returns
success without doing anything. Newer MSVCR*.dll versions probably do not
have this problem: according to CRT sources, they just call MoveFileEx()
with the MOVEFILE_COPY_ALLOWED flag.
Get rid of _wrename() and call MoveFileEx() with proper error handling.
Signed-off-by: Karsten Blees <blees@dcon.de>
_wunlink() / DeleteFileW() refuses to delete symlinks to directories. If
_wunlink() fails with ERROR_ACCESS_DENIED, try _wrmdir() as well.
Signed-off-by: Karsten Blees <blees@dcon.de>
