It is better to state clearly expectations and intentions than to assume
quietly that everybody agrees.
This Code of Conduct is the Open Code of Conduct as per
http://todogroup.org/opencodeofconduct/ (the only modifications are the
adjustments to reflect that there is no "response team" in addition to the
Git for Windows maintainer, and the addition of the link to the Open Code
of Conduct itself).
[Completely revamped, based on the Covenant 1.4 by Brendan Forster]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Turns out that the <AdditionalLibraryDirectories> directive is
unnecessary, as we specify our dependencies with full path anyway.
It is even detrimental, as the flags we get from the current `make
MSVC=1` dry-run include architecture-specific libraries, which make
32-bit builds fail when the .vcxproj files were generated in a 64-bit
setup. These 32-bit builds can be triggered e.g. by calling
msbuild /p:Configuration=Release;Platform=x86 git.sln
in an MSBuild Command Prompt.
This fixes https://github.com/git-for-windows/git/issues/1104.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add check for the end of the entries for the thread partition.
Add test for lazy init name hash with specific directory structure
The lazy init hash name was causing a buffer overflow when the last
entry in the index was multiple folder deep with parent folders that
did not have any files in them.
This adds a test for the boundary condition of the thread partitions
with the folder structure that was triggering the buffer overflow.
The fix was to check if it is the last entry for the thread partition
in the handle_range_dir and not try to use the next entry in the cache.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/pack-name-cleanups:
index-pack: make pointer-alias fallbacks safer
replace snprintf with odb_pack_name()
odb_pack_keep(): stop generating keepfile name
sha1_file.c: make pack-name helper globally accessible
move odb_* declarations out of git-compat-util.h
A few unterminated here documents in tests were fixed, which in
turn revealed incorrect expectations the tests make. These tests
have been updated.
* st/verify-tag:
t7004, t7030: fix here-doc syntax errors
Recent versions of Git treats http alternates (used in dumb http
transport) just like HTTP redirects and requires the client to
enable following it, due to security concerns. But we forgot to
give a warning when we decide not to honor the alternates.
* ew/http-alternates-as-redirects-warning:
http: release strbuf on disabled alternates
http: inform about alternates-as-redirects behavior
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
"git fetch" that requests a commit by object name, when the other
side does not allow such an request, failed without much
explanation.
* mm/fetch-show-error-message-on-unadvertised-object:
fetch-pack: add specific error for fetching an unadvertised object
fetch_refs_via_pack: call report_unmatched_refs
fetch-pack: move code to report unmatched refs to a function
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
A few tests were run conditionally under (rare) conditions where
they cannot be run (like running cvs tests under 'root' account).
* ab/cond-skip-tests:
gitweb tests: skip tests when we don't have Time::HiRes
gitweb tests: change confusing "skip_all" phrasing
cvs tests: skip tests that call "cvs commit" when running as root
user.email that consists of only cruft chars should consistently
error out, but didn't.
* jk/ident-empty:
ident: do not ignore empty config name/email
ident: reject all-crud ident name
ident: handle NULL email when complaining of empty name
ident: mark error messages for translation
"git repack --depth=<n>" for a long time busted the specified depth
when reusing delta from existing packs. This has been corrected.
* jk/delta-chain-limit:
pack-objects: convert recursion to iteration in break_delta_chain()
pack-objects: enforce --depth limit in reused deltas
Teach the "debug" helper used in the test framework that allows a
command to run under "gdb" to make the session interactive.
* sg/test-with-stdin:
tests: make the 'test_pause' helper work in non-verbose mode
tests: create an interactive gdb session with the 'debug' helper
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
The t/perf performance test suite was not prepared to test not so
old versions of Git, but now it covers versions of Git that are not
so ancient.
* jt/perf-updates:
t/perf: add fallback for pre-bin-wrappers versions of git
t/perf: use $MODERN_GIT for all repo-copying steps
t/perf: export variable used in other blocks
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
refs: parse_hide_refs_config to use parse_config_key
The name-hash used for detecting paths that are different only in
cases (which matter on case insensitive filesystems) has been
optimized to take advantage of multi-threading when it makes sense.
* jh/memihash-opt:
name-hash: add test-lazy-init-name-hash to .gitignore
name-hash: add perf test for lazy_init_name_hash
name-hash: add test-lazy-init-name-hash
name-hash: perf improvement for lazy_init_name_hash
hashmap: document memihash_cont, hashmap_disallow_rehash api
hashmap: add disallow_rehash setting
hashmap: allow memihash computation to be continued
name-hash: specify initial size for istate.dir_hash table
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
I should really implement special-handling for a new drop! prefix to
commit messages...
This commit reverts that Pull Request, in preparation for merging in a new
iteration of that work (which looks substantially different from the
previous iteration...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
'git {log,diff,...} -S<...> --pickaxe-regex' can segfault as a result
of out-of-bounds memory reads.
diffcore-pickaxe.c:contains() looks for all matches of the given regex
in a buffer in a loop, advancing the buffer pointer to the end of the
last match in each iteration. When we switched to REG_STARTEND in
b7d36ffca (regex: use regexec_buf(), 2016-09-21), we started passing
the size of that buffer to the regexp engine, too. Unfortunately,
this buffer size is never updated on subsequent iterations, and as the
buffer pointer advances on each iteration, this "bufptr+bufsize"
points past the end of the buffer. This results in segmentation
fault, if that memory can't be accessed. In case of 'git log' it can
also result in erroneously listed commits, if the memory past the end
of buffer is accessible and happens to contain data matching the
regex.
Reduce the buffer size on each iteration as the buffer pointer is
advanced, thus maintaining the correct end of buffer location.
Furthermore, make sure that the buffer pointer is not dereferenced in
the control flow statements when we already reached the end of the
buffer.
The new test is flaky, I've never seen it fail on my Linux box even
without the fix, but this is expected according to db5dfa3 (regex:
-G<pattern> feeds a non NUL-terminated string to regexec() and fails,
2016-09-21). However, it did fail on Travis CI with the first (and
incomplete) version of the fix, and based on that commit message I
would expect the new test without the fix to fail most of the time on
Windows.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to skip the gettext initialization
when the locale directory does not even exist.
This saves 150ms out of 210ms for a simply `git version` call on
Windows, and it most likely will help scripts that call out to
`git.exe` hundreds of times.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We newly handle isatty() by special-casing the stdin/stdout/stderr file
descriptors, caching the return value. However, we missed the case where
dup2() overrides the respective file descriptor.
That poses a problem e.g. where the `show` builtin asks for a pager very
early, the `setup_pager()` function sets the pager depending on the
return value of `isatty()` and then redirects stdout. Subsequently,
`cmd_log_init_finish()` calls `setup_pager()` *again*. What should
happen now is that `isatty()` reports that stdout is *not* a TTY and
consequently stdout should be left alone.
Let's override dup2() to handle this appropriately.
This fixes https://github.com/git-for-windows/git/issues/1077
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The runtime of a simple `git.exe version` call on Windows is currently
dominated by the gettext setup, adding a whopping ~150ms to the ~210ms
total.
Given that this cost is added to each and every git.exe invocation goes
through common-main's invocation of git_setup_gettext(), and given that
scripts have to call git.exe dozens, if not hundreds, of times, this is
a substantial performance penalty.
This is particularly pointless when considering that Git for Windows
ships without localization (to keep the installer's size to a bearable
~34MB): all that time setting up gettext is for naught.
So let's be smart about it and skip setting up gettext if the locale
directory is not even present.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, we simply pass a POSIX path to bindtextdomain(), relying on
the current libintl-8.dll implementation to handle that gracefully by
resolving the path relative to the "root" directory inferred from the
location of the .dll file itself.
However, not only does this rely on the custom patches of the gettext
library as shipped with MSYS2 (gettext's own source code is not prepared
to handle POSIX paths on Windows), it also means that Git itself cannot
use the `podir` variable at all because it does not handle absolute
POSIX paths in system_path() correctly, leaving them as-is.
This patch fixes that behavior by always using a GIT_LOCALE_PATH
relative to the (runtime) prefix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there is no single root directory. And what Git thinks is a
root directory is not a root directory at all: everything is relative to
the location where Git is installed.
To handle this situation better, let's just allow for GIT_TEXTDOMAINDIR
to be a path relative to the (runtime) prefix.
To that end, we have to switch the order in which common-main handles
argv0 and sets up gettext: in order to have access to the runtime
prefix, we need it to be inferred from argv0 already.
This patch also prepares for GIT_LOCALE_PATH to be relative to prefix,
which is the even more important fix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This does not (yet) resolve the problem that Strg+T with multiple
selected lines fails to (un)stage them all, but it addresses one of
the reported Ctrl+T issues.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The gui.recentrepo list may be longer than the maxrecent setting.
Allow extra space to show any extra entries.
In an ideal world, the git gui would limit the number of entries
to the maxrecent setting, however the recentrepo config list may
have been extended outwith the gui, or the maxrecent setting changed
to a reduced value. Further, when testing the gui's recentrepo
logic it is useful to show these extra, but valid, entries.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
When the gui/user selects a repo for display, that repo is brought to
the end of the recentrepo config list. The logic can fail if there are
duplicate old entries for the repo (you cannot unset a single config
entry when duplicates are present).
Similarly, the maxrecentrepo logic could fail if older duplicate entries
are present.
The first commit of this series ({this}~2) fixed the config unsetting
issue. Rather than manipulating a local copy of the $recent list (one
cannot know how many entries were removed), simply re-read it.
We must also catch the error when the attempt to remove the second copy
from the re-read list is performed.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
_get_recentrepo will fail if duplicate invalid entries are present
in the recentrepo config list. The previous commit fixed the
'git config' limitations in _unset_recentrepo by unsetting all config
entries, however this code would fail on the second attempt to unset it.
Refactor the code to pre-sort and de-duplicate the recentrepo list to
avoid a potential second unset attempt.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
The git gui's recent repo list may become contaminated with duplicate
entries. The git gui would barf when attempting to remove one entry.
Remove them all - there is no option within 'git config' to selectively
remove one of the entries.
This issue was reported on the 'Git User' list
(https://groups.google.com/forum/#!topic/git-users/msev4KsQGFc,
Warning: gui.recentrepo has multiply values while executing).
And also by zosrothko as a Git-for-Windows issue
https://github.com/git-for-windows/git/issues/1014.
On startup the gui checks that entries in the recentrepo list are still
valid repos and deletes thoses that are not. If duplicate entries are
present the 'git config --unset' will barf and this prevents the gui
from starting.
Subsequent patches fix other parts of recentrepo logic used for syncing
internal lists with the external .gitconfig.
Reported-by: Alexey Astakhov <asstv7@gmail.com>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
We should not actually expect the first `attrib.exe` in the PATH to
be the one we are looking for. Or that it is in the PATH, for that
matter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
