With the recent changes to allow building with MSVC=1, we now pass the
/OPT:REF option to the compiler. This confuses the parser that wants to
turn the output of a dry run into project definitions for QMake and Visual
Studio:
Unhandled link option @ line 213: /OPT:REF at [...]
Let's just extend the code that passes through options that start with a
dash, so that it passes through options that start with a slash, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add an option for capturing the output of the make dry-run used in
determining the msvc-build structure for easy debugging.
You can use the output of `--make-out <path>` in subsequent runs via the
`--in <path>` option.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git's test suite shows tons of breakages unless Git is compiled
*without* NO_ICONV. That means, in turn, that we need to generate
build definitions *with* libiconv, which in turn implies that we
have to handle the -liconv option properly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Generators/ directory can contain spurious files such as editors'
backup files. Even worse, there could be .swp files which are not even
valid Perl scripts.
Let's just ignore anything but .pm files in said directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Upon seeing the '-lcurl' option, point to the libcurl.lib.
While there, fix the elsif indentation.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Rather than swallowing the errors, it is better to have them in a file.
To make it obvious what this is about, use the file name
'msvc-build-makedryerrors.txt'.
Further, if the output is empty, simply delete that file. As we target
Git for Windows' SDK (which, unlike its predecessor msysGit, offers
Perl versions newer than 5.8), we can use the quite readable syntax
`if -f -z $ErrsFile` (available in Perl >=5.10).
Note that the file will contain the new values of the GIT_VERSION
and GITGUI_VERSION if they were generated by the make file. They
are omitted if the release is tagged and indentically defined in
their respective GIT_VERSION_GEN file DEF_VER variables.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git's build contains steps to handle internationalization. This caused
hiccups in the parser used to generate QMake/Visual Studio project files.
As those steps are irrelevant in this context, let's just ignore them.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The engine.pl script expects file names not to contain spaces. However,
paths with spaces are quite prevalent on Windows. Use shellwords() rather
than split() to parse them correctly.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The error message talked about a "lib option", but it clearly referred
to a link option.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add the Microsoft .manifest pattern, and correct the generic 'Debug'
and 'Release' directory patterns which were mechanically adjusted way
back in c591d5f (gitignore: root most patterns at the top-level directory,
2009-10-26) to allow multi-level projects within the Git suite.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
We need to be very precise when specifying NuGet package versions: while
nuget.exe auto-completes a version, say, 1.0.2 to 1.0.2.0, we will want
to parse packages.config ourselves, to generate the Visual Studio
solution, and there we need the exact version number to be able to
generate the exact path to the correct .targets file.
This topic branch brings the new, experimental builtin version of the
difftool into Git for Windows' master branch.
It still hands off to the legacy Perl script unless the feature flag is
flipped: only when the config setting difftool.useBuiltin is set to true
will `git difftool` actually use the experimental builtin. The idea is to
play it safe for the majority of users, but to allow heavy difftool users
to test early and to help make the builtin robust, before we actually
retire the Perl script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach hash_dir_entry() to remember the previously found dir_entry
during lazy_init_name_hash() iteration. This is a performance
optimization. Since items in the index array are sorted by full
pathname, adjacent items are likely to be in the same directory.
This can save memihash() computations and HashMap lookups.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Specify an initial size for the istate.dir_hash HashMap matching
the size of the istate.name_hash.
Previously hashmap_init() was given 0, causing a 64 bucket
hashmap to be created. When working with very large
repositories, this would cause numerous rehash() calls to
realloc and rebalance the hashmap. This is especially true
when the worktree is deep, with many directories containing
a few files.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Precompute the istate.name_hash and istate.dir_hash values
for each cache-entry during the preload-index phase.
Move the expensive memihash() calculations from lazy_init_name_hash()
to the multi-threaded preload-index phase.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Add variant of memihash() to allow the hash computation to
be continued. There are times when we compute the hash on
a full path and then the hash on just the path to the parent
directory. This can be expensive on large repositories.
With this, we can hash the parent directory first. And then
continue the computation to include the "/filename".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Remove duplicate memihash() call in hash_dir_entry().
The existing code called memihash() to do the find_dir_entry()
and it not found, called memihash() again to do the hashmap_add().
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach preload-index to avoid lstat() calls for index-entries
with skip-worktree bit set. This is a performance optimization.
During a sparse-checkout, the skip-worktree bit is set on items
that were not populated and therefore are not present in the
worktree. The per-thread preload-index loop performs a series
of tests on each index-entry as it attempts to compare the
worktree version with the index and mark them up-to-date.
This patch short-cuts that work.
On a Windows 10 system with a very large repo (450MB index)
and various levels of sparseness, performance was improved
in the {preloadindex=true, fscache=false} case by 80% and
in the {preloadindex=true, fscache=true} case by 20% for various
commands.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
When using cvsnt + msys + git, it seems like the output of cvs status
had \r\n in it, and caused the command to fail.
This fixes that.
Signed-off-by: Dustin Spicuzza <dustin@virtualroadside.com>
This topic branch adds the (experimental) --stdin/-z options to `git
reset`. Those patches are still under review in the upstream Git project,
but are already merged in their experimental form into Git for Windows'
`master` branch, in preparation for a MinGit-only release.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch works around an out-of-memory bug when the user
specified a format via --date=format:<format> that strftime() does
not like.
Reported by Stefan Naewe.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With the recent update in efee955 (gpg-interface: check gpg signature
creation status, 2016-06-17), we ask GPG to send all status updates to
stderr, and then catch the stderr in an strbuf.
But GPG might fail, and send error messages to stderr. And we simply
do not show them to the user.
Even worse: this swallows any interactive prompt for a passphrase. And
detaches stderr from the tty so that the passphrase cannot be read.
So while the first problem could be fixed (by printing the captured
stderr upon error), the second problem cannot be easily fixed, and
presents a major regression.
So let's just revert commit efee9553a4.
This fixes https://github.com/git-for-windows/git/issues/871
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This series of branches introduces the git-rebase--helper, a builtin
helping to accelerate the interactive rebase dramatically.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It has been reported that core.hideDotFiles=false stopped working...
This topic branch fixes it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch allows third-party tools to call `git status
--no-lock-index` to avoid lock contention with the interactive Git usage
of the actual human user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The CreateProcessW() function does not really support spaces in its
first argument, lpApplicationName. But it supports passing NULL as
lpApplicationName, which makes it figure out the application from the
(possibly quoted) first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
This fixes https://github.com/git-for-windows/git/issue/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
