If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Checking the work tree status is quite slow on Windows, due to slow lstat
emulation (git calls lstat once for each file in the index). Windows
operating system APIs seem to be much better at scanning the status
of entire directories than checking single files.
Add an lstat implementation that uses a cache for lstat data. Cache misses
read the entire parent directory and add it to the cache. Subsequent lstat
calls for the same directory are served directly from the cache.
Also implement opendir / readdir / closedir so that they create and use
directory listings in the cache.
The cache doesn't track file system changes and doesn't plug into any
modifying file APIs, so it has to be explicitly enabled for git functions
that don't modify the working copy.
Note: in an earlier version of this patch, the cache was always active and
tracked file system changes via ReadDirectoryChangesW. However, this was
much more complex and had negative impact on the performance of modifying
git commands such as 'git checkout'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX dirent API on Windows via FindFirstFile/FindNextFile is
pretty staightforward, however, most of the information provided in the
WIN32_FIND_DATA structure is thrown away in the process. A more
sophisticated implementation may cache this data, e.g. for later reuse in
calls to lstat.
Make the dirent implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to readdir/closedir that match
the opendir implementation (i.e. similar to vtable pointers in OOP).
Define readdir/closedir so that they call the function pointers in the DIR
structure. This allows to choose the opendir implementation on a
call-by-call basis.
Move the fixed sized dirent.d_name buffer to the dirent-specific DIR
structure, as d_name may be implementation specific (e.g. a caching
implementation may just set d_name to point into the cache instead of
copying the entire file name string).
Signed-off-by: Karsten Blees <blees@dcon.de>
With msysGit the .git directory is supposed to be hidden, unless it is
a bare git repository. Test this.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
At least for cross-platform projects, it makes sense to hide the
files starting with a dot, as this is the behavior on Unix/MacOSX.
However, at least Eclipse has problems interpreting the hidden flag
correctly, so the default is to hide only the .git/ directory.
The config setting core.hideDotFiles therefore supports not only
'true' and 'false', but also 'dotGitOnly'.
[jes: clarified the commit message, made git init respect the setting
by marking the .git/ directory only after reading the config, and added
documentation, and rebased on top of current junio/next]
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Error messages from "git branch" called remote-tracking branches as
"remote branches".
* dl/branch-error-message:
branch: do not call a "remote-tracking branch" a "remote branch"
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
"git rerere forget" in a repository without rerere enabled gave a
cryptic error message; it should be a silent no-op instead.
* jk/rerere-forget-check-enabled:
rerere: exit silently on "forget" when rerere is disabled
The pull.ff configuration was supposed to override the merge.ff
configuration, but it didn't.
* pt/pull-ff-vs-merge-ff:
pull: parse pull.ff as a bool or string
pull: make pull.ff=true override merge.ff
The code to read pack-bitmap wanted to allocate a few hundred
pointers to a structure, but by mistake allocated and leaked memory
enough to hold that many actual structures. Correct the allocation
size and also have it on stack, as it is small enough.
* rs/plug-leak-in-pack-bitmaps:
pack-bitmaps: plug memory leak, fix allocation size for recent_bitmaps
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* ja/tutorial-asciidoctor-fix:
doc: fix unmatched code fences
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* jk/stripspace-asciidoctor-fix:
doc: fix unmatched code fences in git-stripspace
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
Multi-ref transaction support we merged a few releases ago
unnecessarily kept many file descriptors open, risking to fail with
resource exhaustion. This is for 2.4.x track.
* mh/write-refs-sooner-2.4:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
The ref API did not handle cases where 'refs/heads/xyzzy/frotz' is
removed at the same time as 'refs/heads/xyzzy' is added (or vice
versa) very well.
* mh/ref-directory-file:
reflog_expire(): integrate lock_ref_sha1_basic() errors into ours
ref_transaction_commit(): delete extra "the" from error message
ref_transaction_commit(): provide better error messages
rename_ref(): integrate lock_ref_sha1_basic() errors into ours
lock_ref_sha1_basic(): improve diagnostics for ref D/F conflicts
lock_ref_sha1_basic(): report errors via a "struct strbuf *err"
verify_refname_available(): report errors via a "struct strbuf *err"
verify_refname_available(): rename function
refs: check for D/F conflicts among refs created in a transaction
ref_transaction_commit(): use a string_list for detecting duplicates
is_refname_available(): use dirname in first loop
struct nonmatching_ref_data: store a refname instead of a ref_entry
report_refname_conflict(): inline function
entry_matches(): inline function
is_refname_available(): convert local variable "dirname" to strbuf
is_refname_available(): avoid shadowing "dir" variable
is_refname_available(): revamp the comments
t1404: new tests of ref D/F conflicts within transactions
The "log --decorate" enhancement in Git 2.4 that shows the commit
at the tip of the current branch e.g. "HEAD -> master", did not
work with --decorate=full.
* mg/log-decorate-HEAD:
log: do not shorten decoration names too early
log: decorate HEAD with branch name under --decorate=full, too
There was a commented-out (instead of being marked to expect
failure) test that documented a breakage that was fixed since the
test was written; turn it into a proper test.
* sb/t1020-cleanup:
subdirectory tests: code cleanup, uncomment test
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
Let's just fix up the commit that introduces the typedef. This will make
for an elegant clean during the next merging rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In contrast to MSYS2, MSYS1 not only defines REPARSE_DATA_BUFFER in
"ntifs.h" but also in "winnt.h". Luckily, we can distinguish between
MSYS1's and MSYS2's "winnt.h" by looking at the include-guards:
While MSYS1 defines "_WINNT_H", MSYS2 defines "_WINNT_".
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
This branch introduces support for reading the "Windows-wide" Git
configuration from `%PROGRAMDATA%\Git\config`. As these settings are
intended to be shared between *all* Git-related software, that config
file takes an even lower precedence than `$(prefix)/etc/gitconfig`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Back out the super-config branch in favor of the program-data-config
branch (which is a better version of the same feature).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Between the libgit2 and the Git for Windows project, there has been a
discussion how we could share Git configuration to avoid duplication (or
worse: skew).
Earlier, libgit2 was nice enough to just re-use Git for Windows'
C:\Program Files (x86)\Git\etc\gitconfig
but with the upcoming Git for Windows 2.x, there would be more paths to
search, as we will have 64-bit and 32-bit versions, and the
corresponding config files will be in %PROGRAMFILES%\Git\mingw64\etc and
...\mingw32\etc, respectively.
Worse: there are portable Git for Windows versions out there which live
in totally unrelated directories, still.
Therefore we came to a consensus to use `%PROGRAMDATA%\Git\config` as the
location for shared Git settings that are of wider interest than just Git
for Windows.
On XP, there is no %PROGRAMDATA%, therefore we need to use
"%ALLUSERSPROFILE%\Application Data\Git\config" in those setups.
Of course, the configuration in `%PROGRAMDATA%\Git\config` has the
widest reach, therefore it must take the lowest precedence, i.e. Git for
Windows can still override settings in its `etc/gitconfig` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
'git config' (--add / --unset etc.) automatically creates missing config
files. However, it fails with a misleading error message "could not lock
config file" if the parent directory doesn't exist.
Also create missing parent directories.
This is particularly important when calling
git config -f /non/existing/directory/config ...
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch adds the --command=<command> option that allows
starting the Git Bash (or Git CMD) with different terminal emulators
than the one encoded via embedded string resources.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
