Add variant of memihash() to allow the hash computation to
be continued. There are times when we compute the hash on
a full path and then the hash on just the path to the parent
directory. This can be expensive on large repositories.
With this, we can hash the parent directory first. And then
continue the computation to include the "/filename".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Remove duplicate memihash() call in hash_dir_entry().
The existing code called memihash() to do the find_dir_entry()
and it not found, called memihash() again to do the hashmap_add().
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
The upstream version v2.11.0 has been pushed back a few times, and is
now set to be released this coming Tuesday. That is close enough for Git
for Windows to hop on the v2.11 train: it is unlikely that we will need
to release a v2.10.3 before v2.11.0 comes out.
While at it, we use the chance to do a little bit of clean-up: some
patch series were ordered in a historically correct, if illogical
sequence, which has been fixed.
This commit starts the rebase of 1dd81a3 to 86fc2b7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We need to keep the call to read_cache() before parsing the
pathspecs (and hence cannot use the pathspecs to limit any preload)
because parse_pathspec() is using the index to determine whether a
pathspec is, in fact, in a submodule. If we would not read the index
first, parse_pathspec() would not error out on a path that is inside
a submodule, and t7400-submodule-basic.sh would fail with
not ok 47 - do not add files from a submodule
We still want the nice preload performance boost, though, so we simply
call read_cache_preload(&pathspecs) after parsing the pathspecs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The purpose of this function is to stat() the files listed in the index
in a multi-threaded fashion. It is called directly after reading the
index in the read_index_preloaded() function.
However, in some cases we may want to separate the index reading from
the preloading step, e.g. in builtin/add.c, where we need to load the
index before we parse the pathspecs (which needs to error out if one of
the pathspecs refers to a path within a submodule, for which the index
must have been read already), and only then will we want to preload,
possibly limited by the just-parsed pathspecs.
So let's just export that function to allow calling it separately.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"git archive" and "git mailinfo" stopped reading from local
configuration file with a recent update.
* jc/setup-cleanup-fix:
archive: read local configuration
mailinfo: read local configuration
"git rebase -i" did not work well with core.commentchar
configuration variable for two reasons, both of which have been
fixed.
* js/rebase-i-commentchar-fix:
rebase -i: handle core.commentChar=auto
stripspace: respect repository config
rebase -i: highlight problems with core.commentchar
Using a %(HEAD) placeholder in "for-each-ref --format=" option
caused the command to segfault when on an unborn branch.
* jc/for-each-ref-head-segfault-fix:
for-each-ref: do not segv with %(HEAD) on an unborn branch
Since b9605bc4f2 ("config: only read .git/config from configured
repos", 2016-09-12), we do not read from ".git/config" unless we
know we are in a repository. "git archive" however didn't do the
repository discovery and instead relied on the old behaviour.
Teach the command to run a "gentle" version of repository discovery
so that local configuration variables are honoured.
[jc: stole tests from peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "add" to use preload-index and fscache features
to improve performance on very large repositories.
During an "add", a call is made to run_diff_files()
which calls check_remove() for each index-entry. This
calls lstat(). On Windows, the fscache code intercepts
the lstat() calls and builds a private cache using the
FindFirst/FindNext routines, which are much faster.
Somewhat independent of this, is the preload-index code
which distributes some of the start-up costs across
multiple threads.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Since b9605bc4f2 ("config: only read .git/config from configured
repos", 2016-09-12), we do not read from ".git/config" unless we
know we are in a repository. "git mailinfo" however didn't do the
repository discovery and instead relied on the old behaviour. This
was mostly OK because it was merely run as a helper program by other
porcelain scripts that first chdir's up to the root of the working
tree.
Teach the command to run a "gentle" version of repository discovery
so that local configuration variables like mailinfo.scissors are
honoured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.11.0-rc2 introduced one small l10n update, and this commit fixed
the affected translations all in one batch.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
In commit 1462450 ("trailer: allow non-trailers in trailer block",
2016-10-21), functionality was added (and tested [1]) to allow
non-trailer lines in trailer blocks, as long as those blocks contain at
least one Git-generated or user-configured trailer, and consists of at
least 25% trailers. The documentation was updated to mention this new
functionality, but did not mention "user-configured trailer".
Further update the documentation to also mention "user-configured
trailer".
[1] "with non-trailer lines mixed with a configured trailer" in
t/t7513-interpret-trailers.sh
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 84c9dc2 (commit: allow core.commentChar=auto for character auto
selection, 2014-05-17) extended the core.commentChar functionality to
allow for the value 'auto', it forgot that rebase -i was already taught to
handle core.commentChar, and in turn forgot to let rebase -i handle that
new value gracefully.
Reported by Taufiq Hoven.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way "git stripspace" reads the configuration was not quite
kosher, in that the code forgot to probe for a possibly existing
repository (note: stripspace is designed to be usable outside the
repository as well). It read .git/config only when it was run from
the top-level of the working tree by accident. A recent change
b9605bc4f2 ("config: only read .git/config from configured repos",
2016-09-12) stopped reading the repository-local configuration file
".git/config" unless the repository discovery process is done, so
that .git/config is never read even when run from the top-level,
exposing the old bug more.
When rebasing interactively with a commentChar defined in the
current repository's config, the help text at the bottom of the edit
script potentially used an incorrect comment character. This was not
only funny-looking, but also resulted in tons of warnings like this
one:
Warning: the command isn't recognized in the following line
- #
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive rebase does not currently play well with
core.commentchar. Let's add some tests to highlight those problems
that will be fixed in the remainder of the series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clear the precompute flag in create_alias_ce().
It might be possible to use the precompute_ fields from the
alias in the new one, but its not worth the bother.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
The code to flip between "*" and " " prefixes depending on what
branch is checked out used in --format='%(HEAD)' did not consider
that HEAD may resolve to an unborn branch and dereferenced a NULL.
This will become a lot easier to trigger as the codepath will be
used to reimplement "git branch [--list]" in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this topic branch, the PERL5LIB variable is unset to avoid external
settings from interfering with Git's own Perl interpreter.
This branch also cleans up some of our Windows-only config setting code
(and this will need to be rearranged in the next merging rebase so that
the cleanup comes first, and fscache and longPaths support build on
top).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Git for Windows ships with its own Perl interpreter, and insists on
using it, so it will most likely wreak havoc if PERL5LIB is set before
launching Git.
Let's just unset that environment variables when spawning processes.
To make this feature extensible (and overrideable), there is a new
config setting `core.unsetenvvars` that allows specifying a
comma-separated list of names to unset before spawning processes.
Reported by Gabriel Fuhrmann.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach hash_dir_entry() to remember the previously found dir_entry
during lazy_init_name_hash() iteration. This is a performance
optimization. Since items in the index array are sorted by full
pathname, adjacent items are likely to be in the same directory.
This can save memihash() computations and HashMap lookups.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
In the Git for Windows project, we have ample precendent for config
settings that apply to Windows, and to Windows only.
Let's formalize this concept by introducing a platform_core_config()
function that can be #define'd in a platform-specific manner.
This will allow us to contain platform-specific code better, as the
corresponding variables no longer need to be exported so that they can
be defined in environment.c and be set in config.c
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Specify an initial size for the istate.dir_hash HashMap matching
the size of the istate.name_hash.
Previously hashmap_init() was given 0, causing a 64 bucket
hashmap to be created. When working with very large
repositories, this would cause numerous rehash() calls to
realloc and rebalance the hashmap. This is especially true
when the worktree is deep, with many directories containing
a few files.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Precompute the istate.name_hash and istate.dir_hash values
for each cache-entry during the preload-index phase.
Move the expensive memihash() calculations from lazy_init_name_hash()
to the multi-threaded preload-index phase.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Add variant of memihash() to allow the hash computation to
be continued. There are times when we compute the hash on
a full path and then the hash on just the path to the parent
directory. This can be expensive on large repositories.
With this, we can hash the parent directory first. And then
continue the computation to include the "/filename".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Remove duplicate memihash() call in hash_dir_entry().
The existing code called memihash() to do the find_dir_entry()
and it not found, called memihash() again to do the hashmap_add().
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
The "giteveryday" document has a callout list that contains a code
block. This is not a problem for AsciiDoc, but AsciiDoctor sadly was
explicitly designed *not* to render this correctly [*1*]. The symptom is
an unhelpful
line 322: callout list item index: expected 1 got 12
line 325: no callouts refer to list item 1
line 325: callout list item index: expected 2 got 13
line 327: no callouts refer to list item 2
In Git for Windows, we rely on the speed improvement of AsciiDoctor (on
this developer's machine, `make -j15 html` takes roughly 30 seconds with
AsciiDoctor, 70 seconds with AsciiDoc), therefore we need a way to
render this correctly.
The easiest way out is to simplify the callout list, as suggested by
AsciiDoctor's author, even while one may very well disagree with him
that a code block hath no place in a callout list.
*1*: https://github.com/asciidoctor/asciidoctor/issues/1478
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
