t0027 is marked expensive, but really, for MinGW we want to run these
tests always.
Suggested by Thomas Braun.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A string of the form "@/abcd" is considered a file path
by the msys layer and therefore translated to a windows path.
Here the trick is to double the slashes.
The msys patch translation can be studied with the following
test program:
#include <stdio.h>
#include <stdlib.h>
int main(int argc, char** argv)
{
unsigned int i;
for(i=1; i < argc; i++)
printf("argv[%d]=%s\n",i, argv[i]);
exit(0);
}
Signed-off-by: Thomas Braun <thomas.braun@byte-physics.de>
MSys works very hard to convert Unix-style paths into DOS-style ones.
*Very* hard.
So hard, indeed, that
git blame -L/hello/,/green/
is translated into something like
git blame -LC:/msysgit/hello/,C:/msysgit/green/
As seen in msys_p2w in src\msys\msys\rt\src\winsup\cygwin\path.cc, line
3204ff:
case '-':
//
// here we check for POSIX paths as attributes to a POSIX switch.
//
...
seemingly absolute POSIX paths in single-letter options get expanded by
msys.dll unless they contain '=' or ';'.
So a quick and very dirty fix is to use '-L/;*evil/'. (Using an equal sign
works only when it is before a comma, so in the above example, /=*green/
would still be converted to a DOS-style path.)
Commit-message-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The test separator char is a colon which means any absolute paths on windows
confuse the tests that use global_excludes.
Suggested-by: Karsten Blees <karsten.blees@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Apparently the signal handling is not quite correct in the fsckobject
handling (most likely we rely on a side effect that lets us still output
some message after receiving a signal 13 but in the BuildHive setup this
fails intermittently).
As a consequence, the push in t5504 does fail as expected, but fails to
output anything (unexpected). Since this is good enough for now, let's
handle an empty output as success, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This happens only when the corresponding commits are not exported in
the current fast-export run. This can happen either when the relevant
commit is already marked, or when the commit is explicitly marked
as UNINTERESTING with a negative ref by another argument.
This breaks fast-export basec remote helpers.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
On Windows, when Git is installed under "C:\Program Files\Git",
SHELL_PATH will include a space. Fix "git rebase --interactive --exec"
so that it works with spaces in SHELL_PATH.
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Fix some string-matching corner cases when digging in the reflog for
"git status".
* rs/status-detached-head-memcmp:
wt-status: correct and simplify check for detached HEAD
Apple's common crypto implementation of SHA1_Update() does not take
more than 4GB at a time, and we now have a compile-time workaround
for it.
* ad/sha1-update-chunked:
sha1: allow limiting the size of the data passed to SHA1_Update()
sha1: provide another level of indirection for the SHA-1 functions
Produce correct "dirty" marker for shell prompts, even when we
are on an orphan or an unborn branch.
* sg/bash-prompt-dirty-orphan:
bash prompt: indicate dirty index even on orphan branches
bash prompt: remove a redundant 'git diff' option
bash prompt: test dirty index and worktree while on an orphan branch
Allow "git interpret-trailers" to run outside of a Git repository.
* jk/interpret-trailers-outside-a-repository:
interpret-trailers: allow running outside a repository
There was no way to defeat a configured rebase.autostash variable
from the command line, as "git rebase --no-autostash" was missing.
* jk/rebase-no-autostash:
Documentation/git-rebase: fix --no-autostash formatting
rebase: support --no-autostash
The code to prepare the working tree side of temporary directory
for the "dir-diff" feature forgot that symbolic links need not be
copied (or symlinked) to the temporary area, as the code already
special cases and overwrites them. Besides, it was wrong to try
computing the object name of the target of symbolic link, which may
not even exist or may be a directory.
* da/difftool:
difftool: ignore symbolic links in use_wt_file
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
We may want to do the same for .bitmap (and notice but not prune
.keep) without corresponding .pack, but that can be a separate
topic.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
Just like the working tree is cleaned up when the user cancelled
submission in P4Submit.applyCommit(), clean up the mess if "p4
submit" fails.
* eg/p4-submit-catch-failure:
git-p4: clean up after p4 submit failure
Make git-p4 work on a detached head.
* ld/p4-detached-head:
git-p4: work with a detached head
git-p4: add option to system() to return subshell status
git-p4: add failing test for submit from detached head
We now consistently allow all hooks to ignore their standard input,
rather than having git complain of SIGPIPE.
* cb/hook-sigpipe:
allow hooks to ignore their standard input stream
Portability fix for Windows, which may rewrite $SHELL variable using
non-POSIX paths.
* fm/shell-path-whitespace:
rebase-i-exec: Allow space in SHELL_PATH
The "configure" script did not test for -lpthread correctly, which
upset some linkers.
* rc/configure-use-libs-when-checking-a-lib:
configure.ac: use $LIBS not $CFLAGS when testing -lpthread
Commit 4b623d8 (MSVC: link in invalidcontinue.obj for better
POSIX compatibility, 2014-03-29) introduced invalidcontinue.obj
into the Makefile output, which was not parsed correctly by the
buildsystem. Ignore it, as it is known to Visual Studio and,
there is no matching source file.
Only substitute filenames ending with .o when generating the
source .c filename, otherwise a .cbj file may be expected.
Split the .o and .obj processing; 'make' does not produce .obj
files.
In the future there may be source files that produce .obj files
so keep the two issues (.obj files with & without source files)
separate.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Duncan Smart <duncan.smart@gmail.com>
(cherry picked from commit d01d71fe1aed67f4e3a5ab80eeadeaf525ad0846)
If a branch name is longer than four characters then memcmp() reads over
the end of the static string "HEAD". This causes the following test
failures with AddressSanitizer:
t3203-branch-output.sh (Wstat: 256 Tests: 18 Failed: 4)
Failed tests: 12, 15-17
Non-zero exit status: 1
t3412-rebase-root.sh (Wstat: 256 Tests: 31 Failed: 3)
Failed tests: 28-29, 31
Non-zero exit status: 1
t3507-cherry-pick-conflict.sh (Wstat: 256 Tests: 31 Failed: 4)
Failed tests: 14, 29-31
Non-zero exit status: 1
t3510-cherry-pick-sequence.sh (Wstat: 256 Tests: 39 Failed: 14)
Failed tests: 17, 22-26, 28-30, 34-35, 37-39
Non-zero exit status: 1
t3420-rebase-autostash.sh (Wstat: 256 Tests: 28 Failed: 4)
Failed tests: 24-27
Non-zero exit status: 1
t3404-rebase-interactive.sh (Wstat: 256 Tests: 91 Failed: 57)
Failed tests: 17, 19, 21-42, 44, 46-74, 77, 81-82
Non-zero exit status: 1
t3900-i18n-commit.sh (Wstat: 256 Tests: 34 Failed: 1)
Failed test: 34
Non-zero exit status: 1
t5407-post-rewrite-hook.sh (Wstat: 256 Tests: 14 Failed: 6)
Failed tests: 9-14
Non-zero exit status: 1
t7001-mv.sh (Wstat: 256 Tests: 46 Failed: 5)
Failed tests: 39-43
Non-zero exit status: 1
t7509-commit.sh (Wstat: 256 Tests: 12 Failed: 2)
Failed tests: 11-12
Non-zero exit status: 1
t7512-status-help.sh (Wstat: 256 Tests: 39 Failed: 35)
Failed tests: 5-39
Non-zero exit status: 1
t6030-bisect-porcelain.sh (Wstat: 256 Tests: 70 Failed: 1)
Failed test: 13
Non-zero exit status: 1
And if a branch is named "H", "HE", or "HEA" then the current if clause
erroneously considers it as matching "HEAD" because it only compares
up to the end of the branch name.
Fix that by doing the comparison using strcmp() and only after the
branch name is extracted. This way neither too less nor too many
characters are checked. While at it call strchrnul() to find the end
of the branch name instead of open-coding it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
This enables ~ and ~user expansion for these config options.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Jeff King <peff@peff.net>
'git filter-branch' fails complaining about an ambiguous argument, if
a tree-filter renames a path and the new pathname happens to match an
existing object name.
After the tree-filter has been applied, 'git filter-branch' looks for
changed paths by running:
git diff-index -r --name-only --ignore-submodules $commit
which then, because of the lack of disambiguating double-dash, can't
decide whether to treat '$commit' as revision or path and errors out.
Add that disambiguating double-dash after 'git diff-index's revision
argument to make sure that '$commit' is interpreted as a revision.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
By default git check-ignore shows only the filenames that will be
ignored, not the pattern that causes their exclusion. Instead of moving
the partial exclude pattern precendence information to the -v option
where it belongs, link to gitignore(5) which describes this more
thoroughly.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Jeff King <peff@peff.net>
Untracked cache related options should appear in the synopsis.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jeff King <peff@peff.net>
When "p4 submit" command fails in P4Submit.applyCommit, the
workspace is left with the changes. We already have code to revert
the changes to the workspace when the user decides to cancel
submission by aborting the editor that edits the change description,
and we should treat the "p4 submit" failure the same way.
Clean the workspace if p4_write_pipe raised SystemExit, so that the
user don't have to do it themselves.
Signed-off-by: GIRARD Etienne <egirard@murex.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
__git_ps1() doesn't indicate dirty index while on an orphan branch.
To check the dirtiness of the index, __git_ps1() runs 'git diff-index
--cached ... HEAD', which doesn't work on an orphan branch,
because HEAD doesn't point to a valid commit.
Run 'git diff ... --cached' instead, as it does the right thing both
on valid and invalid HEAD, i.e. compares the index to the existing
HEAD in the former case and to the empty tree in the latter. This
fixes the two failing tests added in the first commit of this series.
The dirtiness of the worktree is already checked with 'git diff' and
is displayed correctly even on an orphan branch.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
To get the dirty state indicator __git_ps1() runs 'git diff' with
'--quiet --exit-code' options. '--quiet' already implies
'--exit-code', so the latter is unnecessary and can be removed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
There is only a single test exercising the dirty state indicator on an
orphan branch, and in that test neither the index nor the worktree are
dirty.
Add two failing tests to check the dirty state indicator while either
the index is dirty or while both the index and the worktree are dirty
on an orphan branch, and to show that the dirtiness of the index is
not displayed in these cases (the fourth combination, i.e. clean index
and dirty worktree are impossible on an orphan branch). Update the
existing dirty state indicator on clean orphan branch test to match
the style of the two new tests, most importantly to use 'git checkout
--orphan' instead of cd-ing into a repository that just happens to be
empty and clean.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
When submitting, git-p4 finds the current branch in
order to know if it is allowed to submit (configuration
"git-p4.allowSubmit").
On a detached head, detecting the branch would fail, and
git-p4 would report a cryptic error.
This change teaches git-p4 to recognise a detached head and
submit successfully.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
